These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of merges where audio or video
is the primary track and where audio, video or both are clipped.
PiperOrigin-RevId: 548061254
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of clipping transitions for
sources that are either clipped at the start, the end, or both.
PiperOrigin-RevId: 547730824
When a renderer is pre-enabled (while another playback is still
ongoing), we pass mayRenderStartOfStream=false to Renderer.enable.
This ensures we don't show any first frames while the previous media
is still playing.
Currently, we never tell the renderer when we actually stop playing
the previous media so that it could render the start of the stream,
because we allow this as soon as the renderer is in STATE_STARTED and
we assume that we have to be in STATE_STARTED to make this stream
transition.
While this assumption is true, there are also cases where we can't
start the renderers because they are not ready yet and the video
renderer can't become ready because it didn't render its first frame.
This effectively blocks playback forever.
The most direct way of solving this, is to tell the renderer that
playback has transitioned and that it is now allowed to render the
start of the stream. This means it can never get blocked as described
above.
PiperOrigin-RevId: 547727347
`Mp4WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Mp4WebvttParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Mp4WebvttParser` instance.
PiperOrigin-RevId: 547248157
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Some adjustments to the test to make it more correct and prevent it
from becoming flaky:
- Use separate output dump files per test setup. Once we add more data
to these files, they are not guaranteed to be the same anymore.
- Use a seek position that is actually behind the midroll as described
in the test setup.
- Change ad insertion position to ensure the ad group duration doesn't
exceed the underlying media duration.
- Add a wait for isLoading to ensure the late insertion of an ad group
happens consistently at the same processing stage.
PiperOrigin-RevId: 546825183
This changes all MediaSources in our library to allow updates to
their MediaItems (if supported).
Issue: google/ExoPlayer#9978
Issue: androidx/media#33
PiperOrigin-RevId: 546808812
`SubripDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SubripParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SubripParser` instance.
PiperOrigin-RevId: 546538113
`SsaDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SsaParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SsaParser` instance.
PiperOrigin-RevId: 546336035
`DelegatingSubtitleDecoder` is a `SimpleSubtitleDecoder` that delegates to a `SubtitleParser` instance (e.g. future implementations like `WebvttParser`, `SubripParser`, `SsaParser`, `DvbParser` etc)
It will be in the `exoplayer` package, rather than `extractor` and only be used in the decoding flow which happens after SampleQueue (and to be deprecated). When this decoding flow is deprecated and removed, the class can be later deleted.
PiperOrigin-RevId: 546317528
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may not correctly advance the playback time in the position tracker.
PiperOrigin-RevId: 546011842
When selecting progressive and HLS tracks, we currently check if
we can either seek in the existing samples or are starting from the
beginning of the stream. In both cases, we don't need to reload the
stream and can continue reading.
Seeking to the beginning isn't side-effect free though because it
also sets the startTimeUs to zero. Whether a seek to the beginning
is successful also depends on whether we already loaded a sample or
not. This mean that the startTimeUs value is set (or not set) based
on the speed of the Loader thread even for the same input starting
from the beginning. This race condition means the actual samples
we write to the stream may differ if the stream has initial samples
with negative timestamps.
We can avoid this race condition by checking if the queue is empty
first, so that we only call seekTo if really needed.
PiperOrigin-RevId: 546010951
Robolectric writes warnings to the log output because the Surfaces
we create are not released and pollute the test environment. This
causes performance issues if tests are run repeatedly.
PiperOrigin-RevId: 545906757
We have the optimization to skip buffers if the release time is
exactly the same as the one for the previous buffer. This makes
sense under the assumption that these buffers get released to
a visible Surface and will be ignored anyway.
However, it's also helpful to provide a customization option to not
do this for cases where the outputting MediaCodecAdapter is not
directly talking to a visible Surface or for tests where we can't
fully control the vsync timing of the Surface and want to ensure
we output all samples that are meant to be shown.
PiperOrigin-RevId: 545906113
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may accidentally drop output buffers or calculate the wrong values.
PiperOrigin-RevId: 545690008
Upon track transition of offloaded playback of gapless tracks, the framework will reset the playback head position. The AudioTrackPositionTracker must be made to expect the reset and cache accumulated sum of rawPlaybackHeadPosition.
#minor-release
PiperOrigin-RevId: 545602979
This allows MediaSources to accept MediaItem updates after creation.
This CL adds the handling and plumbing logic in `ExoPlayerImpl`,
`ExoPlayerImplInternal`, `MediaSourceList` and `MaskingMediaSource`.
It also updates all forwarding/wrapping sources to forward these calls
to their wrapped instance.
The actual functionality is only added to `FakeMediaSource` instances in
tests so far.
PiperOrigin-RevId: 545450210
This plumbs a duration through `SampleQueue` which will make it easier
to handle transcoding muxed subtitles from e.g. SubRip to
`text/x-exoplayer-cues`.
This change is a no-op to the end-to-end behaviour of ExoPlayer because
currently we only support parsing sideloaded subtitles before
`SampleQueue`, and by adding the duration we don't affect the cues that
are ultimately output by `Player.Listener.onCues` (as shown by no change
to the golden files for `WebvttPlaybackTest` in this commit).
I considered making `CuesWithStartTimeAndDuration` implement
`Bundleable` (and deleting `CueEncoder/Decoder`) but decided against
it because we are deliberately not encoding `startTimeUs` (since that's
encoded as the sample time in `SampleQueue`). I also considered
introducing another type that only has `List<Cue>` and `durationUs`
fields, but it didn't seem necessary, since we want `startTimeUs`
everywhere else (except inside `SampleQueue`).
PiperOrigin-RevId: 545226847
Instead of playing or pausing itself, the ExoPlayer implementation should only update the playback suppression reason as and when audio outputs are added or removed dynamically.
PiperOrigin-RevId: 544379033
Add a fail-fast check in `ExoPlayerImpl` to ensure the equality of the lengths of `ShuffleOrder` and the current playlist. Also improve the documentation of `setShuffleOrder(ShuffleOrder)` with explicit instruction on this.
Issue: androidx/media#480
#minor-release
PiperOrigin-RevId: 544009359
It currently wrongly documents that it is only called before reading
streams (that has never been the case and all MediaPeriods already need
to handle calls after reading samples from the streams).
It was also a bit unclear what a discontinuity implies and the new
Javadoc calls out the main use case for discontinuties and the intended
meaning of returning a discontinuity.
#minor-release
PiperOrigin-RevId: 543989124
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
PiperOrigin-RevId: 543379665
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
Devices pre-API 33 are not able to comprehend the position reset that occurs by the HAL in offloaded gapless track transitions.
PiperOrigin-RevId: 542503662
When an app tried to re-prepare a live streeam with server side inserted
ad after a playback exception, the player tried to find the ad group by
its index in the ad playback state of the next timeline when creating
the first period.
If a source that supports server side ad, has removed the ad playback
state when the source has been removed, this causes a crash. For live
streams this is a reasonable thing to do given the exception could be
caused by an invalid ad playback state.
This change removes the ad metadata from the current period for live
streams and the timeline. In case the ad playback state is not reset
by the source, the first timeline refresh would ad the metadata again.
PiperOrigin-RevId: 541959628
Some events may arrive after the playlist is cleared (e.g. load
cancellation). In this case, the DefaultPlaybackSessionManager may
create a new session for the already removed item.
We already have checks in place that ignore events with old
windowSequenceNumbers, but these checks only work if the current
session is set (i.e. the playlist is non-empty). The fix is to add
the same check for empty playlists by keeping note of the last
removed window sequence number.
PiperOrigin-RevId: 541870812
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
Otherwise, texture output errors out if video decoding decodes faster than audio,
hitting the end of the file, while audio is still in the middle of the file.
PiperOrigin-RevId: 536679568
*** Original commit ***
ExoPlayer: Add setVideoFrameProcessorFactory().
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
***
PiperOrigin-RevId: 536391597
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
PiperOrigin-RevId: 534044831
The methods in ExoPlayerImpl and MediaControllerImplBase that determine
the new PlayerInfo/PlaybackInfo currently have a hard-to-reason-about
setup where the method generating the new info accesses other methods
that rely on the existing class field instead of working with the
passed in PlayerInfo/PlaybackInfo. This prevents reuse of the util
methods (e.g. for replaceMediaItems) because they access potentially
stale state.
This change untangles these methods a bit by making the util methods
either static or at least ensure that they don't rely on existing
class fields of PlayerInfo/PlaybackInfo. Overall, the change is a
complete no-op.
#minor-release
PiperOrigin-RevId: 534036633
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This is useful for cases where only certain types (e.g. only video)
from a source are needed and other tracks should be filtered out
completely to avoid later track selection issues.
#minor-release
PiperOrigin-RevId: 533394658
Use a non deprecated constructor that includes the option to provide a `channelDescriptionResourceId` parameter.
#minor-release
PiperOrigin-RevId: 532450975
This change adds end-to-end Robolectric playback tests which handle
the scenario the player is playing audio via passthrough and
AudioTrack raises the ERROR_DEAD_OBJECT error upon which the player
attempts to recover by switching to another audio format.
PiperOrigin-RevId: 531180183
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
Adding items to an empty playlist is slightly different from adding
items to a non-empty playlist, because the former usually requires to
handle a change in the current item, position and playback state,
while the latter is not expected to affect the current item, position
or state.
The current ExoPlayer and SimpleBasePlayer code doesn't account for
this difference, leading to inconsistent behavior between
setMediaItem(s) and addMediaItem(s) when called on an empty playlist.
PiperOrigin-RevId: 530549928
* Implement RendererCapabilities.Listener in DefaultTrackSelector.
* Add new methods TrackSelector.invalidateForRendererCapabilitiesChange and TrackSelector.InvalidateListener.onRendererCapabilitiesChanged.
* Add new field allowInvalidateSelectionsOnRendererCapabilitiesChange to DefaultTrackSelector.Parameter to allow opt-in of the renderer capabilities detection feature.
* Add logics of triggering track reselection when renderer capabilities change.
PiperOrigin-RevId: 529067433
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
The only dependencies that are not updated are the ones that need
to be kept in sync with other system (like Android source tree) or
would require a Kotlin dependency in common or exoplayer modules.
As a side effect, some demo apps now need a Kotlin config and some
additional modules require desugaring/multidex logic. To simplify
the setup, the desugaring and multidex steps are added to the common
config.
PiperOrigin-RevId: 527243950
`prepare()` now logs a warning if it's called before `setPlayer()`
because it's not possible to tell if it's being called on the wrong
thread (since 3480a27994).
This change finds all the places one is called immediately after the
other and flips the order to be more correct.
Issue: androidx/media#350
#minor-release
PiperOrigin-RevId: 526582294
This simplifies the addition of new fields in the future.
Also do some misc clean up for the volume limit values:
- Add some documentation to mention assumed defaults
- Add the IntRange annotations to match the ones we have in Player
already
- Mention the limits in the relevant Player methods
- Avoid bundling default values
- Improve range checks for masking in MediaController
PiperOrigin-RevId: 526029619
If the limited number of input buffers causes reading of all samples except the last one conveying end of stream, then the last frame will not be rendered.
PiperOrigin-RevId: 525974445
Previously, ExoPlayerImpl had volume flags hardcoded to SHOW_UI, but now the developer can choose what happens on volume change. The old methods have been deprecated.
PiperOrigin-RevId: 523974358
The setter command is only used for setPlaylistMetadata and can
be named COMMAND_SET_PLAYLIST_METADATA. The getter commnad is
used to access getMediaMetadata and getPlaylistMetadata and can
be better named COMMAND_GET_METADATA to reflect this usage.
PiperOrigin-RevId: 523673286
It is not possible to provide a safe deprecation path because
BaseTrackSelection can't easily know which of the methods is
implemented by subclasses.
PiperOrigin-RevId: 523471578
Change what format is logged from MediaCodecAudioRenderer when
AudioSink throws InitializationException. We printed the
AudioSink's format, which most of the times is audio/raw (PCM)
and not the renderer's format. With this change both formats are
logged.
#minor-release
Issue: google/ExoPlayer#11066
PiperOrigin-RevId: 523456840
In addition to the changes in 3a5c4277a7
This change essentially reverts 30e5bc9837 (Merged Jul 2022).
From this CL on, `VideoFrameProcessor` takes in non-offset, monotonically
increasing timestamps. For example, with one 5s and one 10s video,
- `VideoFrameProcessor`'s input should start from 0
- On switching to the second video (10s), the timestamp of the first frame in
the second video should be at 5s.
In ExoPlayer however, `streamOffset` is managed differently and thus needs
correction before sending the frames to `VideoFrameProcessor`:
- The timestamp of the first video is offset by a large int, so the first frame
of the first media item has timestamp (assuming) 10000000000000000
- The last frame of the first media item has 10000005000000000
- At this point the stream off set is updated to 10000005000000000
- The pts of the first frame of the second video starts from 0 again.
PiperOrigin-RevId: 523444236
There is a race with the ad period preparation having completed
and `onDownstreamFormatChanged` being called when a live stream
is joined in an ad period. In this case the stream event metadata
of the period is immediately emitted and causing an ad media period
being created that is selected in `getMediaPeriodForEvent` before
being prepared (1 out of 4).
Using an `isPrepared` flag makes sure we don't hand out the media
period to early in `getMediaPeriodForEvent`.
PiperOrigin-RevId: 522340046
* Add a new event `onAudioCapabilitiesChanged` in `AudioSink.Listener` interface.
* Add an interface `RendererCapabilities.Listener`, which will listen to `onRendererCapabilitiesChanged` events from the renderer.
* Add `getRendererCapabilitiesReceiver` method for `TrackSelector`, and register/unregister the `TrackSelector` as the `RendererCapabilitiesReceiver` (if implemented) when the `ExoPlayer` is initialized/released.
* Trigger the `AudioSink.Listener.onAudioCapabilitiesChanged` and further `RendererCapabilities.Listener.onRendererCapabilitiesChanged` events when the audio capabilities changes are detected in `DefaultAudioSink`.
PiperOrigin-RevId: 521427567
The `DashMediaSource` wrongly added an offset to the media times set
to the `MediaLoadData`. With this the `startTimeMS` and `endTimeMs`
don't represent the positions in the period but in the stream.
`DashMediaSource` was the only call site that was setting the offset
to a non-zero value. So if we are using 0 for the `DashMediaSource`
as well, the offset is redundant and we can remove it everywhere.
PiperOrigin-RevId: 520682026
The media3-hosted versions of these SVGs were removed due to a change in
the way the reference docs are generated. While work on getting them
hosted on developer.android.com, this change simply links to the
(identical) exoplayer2 versions in order to fix the media3 docs.
#minor-release
PiperOrigin-RevId: 520647905
Also fixed the javadoc link in devsite and removed javadoc links from decoder extensions as it is not published yet on developer.android.com.
#minor-release
PiperOrigin-RevId: 520636868
This means we don't need to manually store the result of `get()` into a
local to convince the nullness checker that it remains non-null.
PiperOrigin-RevId: 520576719
For multi-period live streams the content timeline for
which the global ad playback state has been split needs
to be kept together to not run into a race between
timeline refreshes and ad events.
PiperOrigin-RevId: 520358964
`DefaultDrmSession(Manager)` expect most of their methods to be called
on the 'playback thread'. There isn't a playback thread in the case of
`OfflineLicenseHelper`, but in that case it's the thread backing
`DefaultDrmSessionManager.playbackLooper`, which is `OfflineLicenseHelper.handlerThread`.
PiperOrigin-RevId: 520053006
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 519665752
When MediaCodecRenderer is given an empty sample stream, it puts
its output format change tracking in a bad state where we never
process future stream changes because we are waiting for a sample
that doesn't exist.
We can fix this by:
- Looping the pending output stream changes to see if we processed
more than one change at once (this fixes the tracking for empty
sample streams that are not the first in the queue).
- Checking if none of the previous streams queued any samples in
onStreamChanged to handle this in the same way as the case
where we already output all samples (this fixes the problem when
the empty sample stream comes first in the queue).
- Also calling onProcessedStreamChange for the case above, which
was missing previously.
#minor-release
PiperOrigin-RevId: 519226637
This wasn't added so far because releasing is always allowed from a
MediaController (as it just releases the connection, not the session
player). But Player instances can be created for other purposes and
the receiver of a Player instance should not always be allowed to
call release if it doesn't own the player resource.
PiperOrigin-RevId: 519121122
The content timeline field may be updated when the live timeline
is refreshed in the looper event preceding the runnable that is
posted to the player thread. Hence a new timeline may contain a
new period uid that is not present in the ad playback state map.
Using a final reference makes sure period and ad playback state
match when asserted.
PiperOrigin-RevId: 518228165
This change makes sure that live ad periods that are played are
skip when attempted to be added to the queue. To make this work
the existing filter logic had to be take into account the content
resume offset that live periods use.
PiperOrigin-RevId: 518068138
* Add `release` method to Renderer and AudioSink interfaces.
* Call the `release` method for renderers when the ExoPlayer is going to be released.
PiperOrigin-RevId: 517135677
While playback thread is 'asleep' during audio offload playback, the playbackInfo.positionUs is not being constantly updated. During this time, the returned value from getCurrentPosition should return an estimate based on the most recent value and playback speed.
PiperOrigin-RevId: 516550509
* Add AudioDeviceCallbackApi23 class which extends the AudioDeviceCallback.
* Add registerAudioDeviceCallback and unregisterAudioDeviceCallback methods for Api23.
* Modify the logics of AudioCapabilitiesReceiver constructor, register and unregister methods.
PiperOrigin-RevId: 516183997
This change makes sure that the `AdPlaybackState` of any period can
contain an empty postroll placeholder.
The placeholder postroll should be represented in the `MediaPeriodId`
of a content period as `nextAdGroupIndex`, but should be ignored when
building the list of `MediaPeriodInfo` in the `MediaPeriodQueue`. This
is required to allow to add an ad group to ad playback state of the
content period that is currently being played, instantly insert an ad
period into the media period queue and immediately transition playback
to the new period.
This change makes sure and tests that
- a live server side inserted postroll placeholder can be inserted to
a `AdPlaybackState` in well-defined and tested way (helper method)
- a postroll placeholder is NOT ignored when
`AdPlaybackState.getAdGroupIndexAfterPositionUs` is called (this
is required when evaluating the `nextAdGroupIndex`).
- a postroll placeholder is ignored when
`AdPlaybackState.getAdGroupIndexForPositionUs` is called (this is
required to not attempt to play the ad and is analogous to ignore the
post roll placeholder in a single period timeline).
- `MediaPeriod.getFollowingMediaPeriodInfo()` does not include a
`MediaPeriodInfo` for the placeholder postroll when building the
queue.
PiperOrigin-RevId: 515079136
We currently rely on the raw playback head position to check if any
data is pending in the AudioTrack (e.g. to know if the renderer is
still ready). We can use the value returned from getCurrentPositionUs
instead to align the "isReady" logic with the playback position logic.
This has the side effect that getPlaybackHeadPosition position is called
less often when the position is obtained via getTimestamp.
PiperOrigin-RevId: 514747613
Once the value returned from AudioTimestampPoller advances, we
only need getPlaybackHeadPosition to sample sync params and
verify the returned timestamp. Both of these happen less often
and we can avoid calling getPlaybackHeadPosition if we don't
actually need it.
PiperOrigin-RevId: 512882170
Playback parameter signalling can be quite complex because
(a) the renderer clock often has a delay before it realizes
that it doesn't support a previously set speed and
(b) the speed set on media clock sometimes intentionally
differs from the one surfaced to the user, e.g. during
live speed adjustment or when overriding ad playback
speed to 1.0f.
This change fixes two problems related to this signalling:
1. When resetting the media clock speed at a period transition,
we don't currently tell the renderers that this happened.
2. When a delayed speed change update from the media clock is
pending and the renderer for this media clock is disabled
before the change can be handled, the pending update becomes
stale but it still applied later and overrides any other valid
speed set in the meantime.
Both edge cases are also covered by extended or new player tests.
Issue: google/ExoPlayer#10882
#minor-release
PiperOrigin-RevId: 512658918
MediaCodecRenderer currently has two independent paths to trigger
events at stream changes:
1. Detection of the last output buffer of the old stream to trigger
onProcessedStreamChange and setting the new output stream offset.
2. Detection of the first input buffer of the new stream to trigger
onOutputFormatChanged.
Both events are identical for most media. However, there are two
problematic cases:
A. (1) happens after (2). This may happen if the declared media
duration is shorter than the actual last sample timestamp.
B. (2) is too late and there are output samples between (1) and (2).
This can happen if the new media outputs samples with a timestamp
less than the first input timestamp.
This can be made more robust by:
- Keeping a separate formatQueue for each stream to avoid case A.
- Force outputting the first format after a stream change to
avoid case B.
Issue: google/ExoPlayer#8594
#minor-release
PiperOrigin-RevId: 512586838
Some devices were reported to have wrong PerformancePoint sets
that cause 60 fps to be marked as unsupported even though they
are supported.
Issue: google/ExoPlayer#10898
#minor-release
PiperOrigin-RevId: 512580395
The output info for a new stream is marked pending until the last
sample of the previous stream has been processed. However, this fails
if the previous stream has already been fully processed. We need to
detect this case explicitly to avoid signalling the output change one
sample too late.
#minor-release
PiperOrigin-RevId: 512572854
This test became flaky after ab7e84fb34 because some of the
unrealistic frame times ended up on the same release time.
Using realistic numbers avoids the flakiness.
PiperOrigin-RevId: 512566469
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
The current logic uses manual array operations to keep track of pending
changes. Modernize this code by using an ArrayDeque and a data class.
This also allows to extend the output stream information in the future.
This also fixes a bug where a position reset accidentally assigns a pending
stream offset instead of keeping the current one.
#minor-release
PiperOrigin-RevId: 511787571
When rendering frames at a rate higher than the screen refresh rate,
e.g. playing at 8x, the player is releasing multiple frames at the same
release time (nanos) which are then dropped by the platform. The output
buffers are available later and as a result MediaCodec cannot keep up
decoding fast enough.
This change skips releasing multiple video frames on the same vsync
period and proactivelly drops the frame. The frame is counted as skipped
rather than dropped to differentiate with frames dropped due to slow
decoding.
PiperOrigin-RevId: 510964976
This call may cause performance overhead in some situations,
for example if the AudioTrack needs to query an offload DSP
for the current position. We don't need to check this multiple
times per doSomeWork iteration as the value is unlikely to
change in any meaningful way.
PiperOrigin-RevId: 510957116
Rename ScaleToFitTransformation to ScaleAndRotateTransformation.
This better represents the operations that can be accomplished using this
effect. The name was originally named ScaleToFit* because it's not obvious how
to scale to fit using OpenGL, and this effect handled the scaling to fit in a way that no other MatrixTransformations did.
However, it's hard to discover how to rotate when skimming names of effects, so
it's probably more useful to convey that this effect rotates, than that it
scales to fit.
PiperOrigin-RevId: 510480078
Previously, any constructors instrumented by Robolectric were made public. This
caused two types of issues:
1) If Android classes had non-public constructors which were made public and
added to the Android API, Robolectric allowed tests to incorrectly use the
constructors on older SDK levels (where they were non-public). This most
commonly occurs for AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible, which did not match what
happened when running on an Android test.
Update the instrumentation in Robolectric to prevent making all public
constructors.
PiperOrigin-RevId: 510049123
Tests in `SilenceSkippingAudioProcessorTest` used half as many short integers as needed for channel values when generating alternating silence/noise input. Fix this by passing left and right channel input.
PiperOrigin-RevId: 509188074
The AsynchronousMediaCodecAdapter's queuing thread stores any exceptions
raised by MediaCodec and re-throws them on the next call to
queueInputBuffer()/queueSecureInputBuffer(). However, if MediaCodec
raises and error while queueing, it goes into a failed state and does
not announce available input buffers. If there is no input available
input buffer, the MediaCodecRenderer will never call
queueInputBuffer()/queueSecureInputBuffer(), hence playback is stalled.
This change surfaces the queueing error through the adapter's dequeueing
methods.
PiperOrigin-RevId: 508637346
`TrackSelectorResult.rendererConfigurations` can contain null elements:
> A null entry indicates the corresponding renderer should be disabled.
This wasn't caught by the nullness checker because `ExoPlayerImpl` is
currently excluded from analysis.
#minor-release
Issue: google/ExoPlayer#10977
PiperOrigin-RevId: 508619169
Previously, Robolectric's instrumentation updated all constructors to be
public. This caused two main types of problems:
1) When non-public constructors were made public and added to the Android API,
Robolectric allowed tests to incorrectly use the constructors on older SDK
levels (where they were non-public). This most commonly occurs for
AccessibiltyEvent and AccessibilityNodeInfo.
2) When reflection was used to instantiate classes that were instrumented by
Robolectric, all constructors were accessible.
Fix issues across Google3 Robolectric tests that were affected by this issue.
A forthcoming change will fix the instrumentation in Robolectric to prevent
this type of issue from occurring.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:507861075:BASE:507805409:1675803313108:f2128fa4
PiperOrigin-RevId: 508087822
If a renderer error happens while processing readahead data for the
next item in the playlist, we currently throw the error immediately
and only set the item id in the error details. This makes it harder
to associate the error to the right item. For example, the user
facing UI is likely not updated to show the failing item when the
error is reported.
This can be improved slighly by force setting the position to the
failing item. The playback still fails immediately, but this can't
be avoided because the renderer itself went into an error state.
PiperOrigin-RevId: 507808635
The AudioTrackPositionTracker needs to correct positions by
the speed set on the AudioTrack itself whenever it makes
estimations based on real-time (=the real-time playout
duration is not equal to the media duration played).
This happens for the main playback path already, but not for
the mode in which the position is estimated from the playback
head position and also not in the phase after the track has
been stopped. Both cases are not very noticeable during
normal playback, but become relevant when playing in offload
mode.
PiperOrigin-RevId: 507736408
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
Before this CL, the `renderedLastFrame` flag is not set if the last frame is released immediately (force render), or when it's dropped.
PiperOrigin-RevId: 506358626
Flushing resets all the texture processors within the `FrameProcessor`. This
includes:
- At the back, the FinalMatrixTextureProcessorWrapper, and its MatrixTextureProcessor
- At the front, the ExternalTextureManager
- All the texture processors in between
- All the ChainingGlTextureProcessorListeners in between texture processors
- All the internal states in the aforementioned components
The flush process follows the order, from `GlEffectsFrameProcessor.flush()`
1. Flush the `FrameProcessingTaskExecutor`, so that after it returns, all tasks queued before calling `flush()` completes
2. Post to `FrameProcessingTaskExecutor`, to flush the `FinalMatrixTextureProcessorWrapper`
3. Flushing the `FinalMatrixTextureProcessorWrapper` will propagate flushing through, via the `ChainingGlTextureProcessorListener`
Startblock:
has LGTM from christosts
and then
add reviewer andrewlewis
PiperOrigin-RevId: 506296469
Can be used to combine multiple media items into a single timeline window.
Issue: androidx/media#247
Issue: google/ExoPlayer#4868
PiperOrigin-RevId: 506283307
AudioProcessor-based speed changes are not supported with
offload, so we should use the AudioTrack-based speed changes
by default if the user requests a speed change.
This moves the decision of which speed change path is used
into the Configuration, so that it can change for each
AudioTrack in a playlist.
PiperOrigin-RevId: 505621911
This makes it easier to reason about some parts of the code and
will eventually allow to easily switch between AudioProcessor-
based on AudioSink-based speed adjustment.
The current state saves the applicable playback parameters
in separate variables depending on which speed adjustment
path is used. Moreover, the AudioProcessor-based logic keeps
a chain of pending parameter changes and we derive the last
applicable one everytime we need the current parameters.
After this change, this is simplified by
- keeping a common value for playback parameters independent
of the actual path we use for adjustment.
- keeping the final ("current") parameters directly, instead
of deriving it from a chain of yet to be applied parameters.
PiperOrigin-RevId: 505097294
MergingMediaPeriod creates its track groups with ids concatenating position in its periods array and the underlying child track group id. The ids can be used in selectTracks for matching to periods list.
Issue: google/ExoPlayer#10930
PiperOrigin-RevId: 505074653
`FrameProcessorManager` now reports it's not ready when the output surface is set but not the output resolution. `FrameProcessorManager` allows playback without an output surface, like with ExoPlayer.
PiperOrigin-RevId: 504626088
Resampling as a term is overloaded, however it was raised as a
confusing term in a meeting recently, as the 1P team initially thought
this would change the sample rate. The naming of this `AudioProcessor`
now matches `ToInt16PcmAudioProcessor`.
PiperOrigin-RevId: 503441019
This is needed for constrained multi-asset to shift the timestamps of
the media items that are not the first in the sequence.
PiperOrigin-RevId: 502409923
Previously, after calling MCVR.setOutput() with null, `frameProcessorManager`'s output surface is cleared. What was unexpected is `ExoPlayerInternal` notifies a zero output resolution after clearing the output surface. This zero resolution causes FrameProcessor to fail.
PiperOrigin-RevId: 501861993
Starting with Android 13 (API 33) an app needs to request the
permission to post notifications or notifications are suppressed.
This change documents this in the class level JavaDoc of the
`DownloadService`.
Issue: google/ExoPlayer#10884
PiperOrigin-RevId: 501346908
When audio processors are enabled during tunneling, they must produce
output immediately, ensuring that the timestamps of the output samples
correspond to the input and that no additional samples are produced.
This requirement is documented in the Javadoc of DefaultAudioSink.
However, this alone doesn't guarantee all buffers are immediately
written to the AudioTrack, because the AudioTrack writes are
non-blocking and may need multiple attempts.
When draining the audio sink at the end of the stream, we currently
fail in this situation because we assert that the timestamp must be
set (=the drain operation is a no-op). But this may not be true when
the previous non-blocking write wasn't fully handled. We can fix this
by saving the last timestamp and reusing it during draining.
Issue: google/ExoPlayer#10847
PiperOrigin-RevId: 500943891
Initialising the fields as Integer and then getting a String on compute time is slow. Instead we directly initialise these fields as String. Improves the time taken in bundling PlayerInfo further to less than 200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
FrameProcessor already support using different transfer function for input and
output color. This CL has two major changes:
- Create an eglSurface that recognizes BT.2020 PQ
- This requires a separate extension that works only after 33
- So we current throw, if input is HDR, and this extension doesn't work
- Create FrameProcessor with PQ output transfer function
PiperOrigin-RevId: 496023758
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
It covers the following cases:
| From/To | `null` | `surface 0` | `surface 1` |
|-------------|--------|-------------|-------------|
| `null` | 🆖 | 📺 | 📺 |
| `surface 0` | ❌ | 🔁 | 📺 |
| `surface 1` | ❌ | 📺 | 🔁 |
Where
- 🆖 means NOP
- ❌ means
- Set `null` on FrameProcessor, effectively dropping all frames
- 📺 means
- Notify the listener of video size
- Set FrameProcessor output surface and size when MSG_SET_VIDEO_OUTPUT_SIZE is received
- 🔁 means
- Notify the listener of video size
PiperOrigin-RevId: 495477620
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
- Use a single `VideoSize` instance instead of four primitive fields.
- Clarify that the reported size is the decoded size, that is the encoded video
size.
PiperOrigin-RevId: 494148190
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
An AndroidTest is needed to test the message sending from ExoPlayerImpl to
a video renderer (MCVR in this case). The test will be added later.
PiperOrigin-RevId: 493602259
These have the same value (`-1`), and basically the same meaning (offset
in an array/list/file/byte stream/etc), but 'position' is an overloaded
term in a media playback library, and there's a risk people assume that
methods like `Player.getCurrentPosition()` may return
`C.POSITION_UNSET`, when in fact unset media times (whether duration or
position) are always represented by `C.TIME_UNSET` which is a) a `long`
(not `int`) and b) a different underlying value. (aside:
`getCurrentPosition()` never returns an unset value, but it's a good
example of the ambiguity of the word 'position' between 'byte offset'
and 'media timestamp'.)
PiperOrigin-RevId: 492493102
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
Our FakeClock generally makes sure that playback tests are fully
deterministic. However, this fails if the test uses blocking waits
with clock.onThreadBlocked and where relevant Handlers are created
without using the clock.
To fix the flakiness, we can make the following adjustments:
- Use TestExoPlayerBuilder instead of legacy ExoPlayerTestRunner
to avoid onThreadBlocked calls. This also makes the tests more
readable.
- Use clock to create Handler for FakeVideoRenderer and
FakeAudioRenderer. Ideally, this should be passed through
RenderersFactory, but it's too disruptive given this is a
public API.
- Use clock for MediaSourceList and MediaPeriodQueue update
handler.
PiperOrigin-RevId: 490907495
When estimating the AudioTrack min buffer size, we must use a PCM
frame of 1 when doing direct playback (passthrough). The code was
passing -1 (C.LENGTH_UNSET).
PiperOrigin-RevId: 489238392
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
It's not clear to me why presubmit didn't catch this, I briefly
investigated but couldn't work it out - so I'm just going to fix
it and move on.
#minor-release
PiperOrigin-RevId: 487497827
This makes two types of fix:
1. Align parameter names on overridden methods where the superclass
has `@param` javadoc.
2. Use `@hide` on `protected final` methods that refer to package-private
types. This will hide these symbols from Dackka javadoc generation
but not (currently) from the artefacts distributed on Maven. These
methods are currently unusable outside their package anyway (e.g. by
external developers) because of the dependency on a package-private
type.
This also changes some HLS, SmoothStreaming, and IMA code where I've renamed
parameters of overridden methods to be consistent across the type
hierarchy.
#minor-release
PiperOrigin-RevId: 487472665
This change makes adding ad events in live streams more robust by allowing ad
groups to grow in number of ads if more ad events are received than initially
announced by the SDK.
With the IMA prefetch feature, an AdPod can grow in size in certain conditions
like from initially 2 ads to 4 ads being part of the ad group. With this change,
if an additional ad event arrives while the ad group is still being played,
the ad group is expanded. If the event arrives late and the ad group is already
completed, a new group is created for the remaining ads.
This also covers the case where we join the live stream while an ad is being
played and we missed at least one LOADED event from the SDK. Ads of the group
before the first LOADED event are ignored in such a case.
PiperOrigin-RevId: 484214760
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
Although it can be useful to check the output format, it's not required or needed.
For some AudioProcessor implementations, it is stated/obvious that
the output format will match the input, in which case there is no
a need to check the return value.
#cleanup
PiperOrigin-RevId: 483403679
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
We already have logic to end all session except the current one if the
current one doesn't have a MediaPeriodId yet. This is assuming that this
only happens after a seek on the app side where the player doesn't have
detailled knowledge about the MediaPeriodIds yet.
Currently this logic isn't triggered if the window we are coming from
doesn't have its MediaPeriodId either as we run into another check that
keeps sessions around until we have a valid windowSequenceNumber.
Swapping both conditions fixes this case without breaking any of the
other known transition scenarios.
Issue: androidx/media#180
PiperOrigin-RevId: 480866465
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
Despite unregistering the callback and clearing pending Handler
messages, the callback may still receive pending calls if they
are already triggered by the AudioTrack. Instead of asserting
that the track is correct, we should gracefully ignore stale
events.
PiperOrigin-RevId: 463851393
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
#minor-release
PiperOrigin-RevId: 460721541
We currently start a simple Thread to release AudioTracks
asynchronously. If many AudioTracks are released at the same
time, this may lead to OOM situations because we attempt to
create multiple new threads.
This can be improved by using a shared SingleThreadExecutor.
In the simple case of one simmultaneous release, it's exactly
the same behavior as before: create a thread and release it
as soon as it's done. For multiple simultanous releases we
get the advantage of sharing a single thread to avoid creating
more than one at the same time.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 460698942
Some calls to handleBuffer return false while a previous
flush is still handled in the background.
Fix this by either asserting the method returns true if
we don't expect any delay, or calling it repeatedly until
it returns true (within a timeout).
PiperOrigin-RevId: 460474419
I don't think it's useful to keep these in numerical order, it makes
more sense to keep them grouped into a 'logical' ordering.
#minor-release
PiperOrigin-RevId: 460453464
We wait until a previous AudioTrack has been released before
creating a new one. This is currently done with a thread
block operation, which may cause ANRs in the extreme case
when someone attempts to release the player while this is
still blocked.
The problem can be avoided by just returning false from
DefaultAudioSink.handleBuffer to try again until the previous
AudioTrack is released.
Reproduction steps to force the issue:
1. Add Thread.sleep(10000); to the AudioTrack release thread.
2. Add this to the demo app:
private int positionMs = 0;
Handler handler = new Handler();
handler.post(new Runnable() {
@Override
public void run() {
player.seekTo(positionMs++);
if (positionMs == 10) {
player.release();
} else {
handler.postDelayed(this, 1000);
}
}
3. Observe Player release timeout exception.
These steps can't be easily captured in a unit test as we can't
artifically delay the AudioTrack release from the test.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 459468912
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
NoUidTimeline still exists as a private detail of TestUtil, but it no
longer extends ForwardingTimeline because the interactions are quite
hard to reason about.
#minor-release
PiperOrigin-RevId: 457703593
1. The offloadSchedulingEnabled value doesn't need to be in
PlaybackInfo because it's never updated in EPII.
2. The sleepingForOffload value in EPII wasn't updated explicitly
(just via the return value of a method). It was also only
meant to be enabled while the player is actively playing, but
confusingly triggered from a path where the player may
theoretically be buffering as well.
3. The offload sleeping (=not scheduling doSomeWork) was interwoven
into the actual scheduling code making it slightly hard to follow.
This can be improved slightly by keeping the offload sleeping
decision and the scheduling separate.
PiperOrigin-RevId: 457427293
The offload sleeping stops as soon as a new DO_SOME_WORK message
is handled (because this indicates an expected change in rendering
and we want to stop sleeping until we know it's safe to do so).
Every exit path from doSomeWork needs to clear other pending
DO_SOME_WORK messages as these requests have already been handled by
the current method invocation. This currently doesn't happen from the
offload sleeping return path and a previously queued DO_SOME_WORK
message can immediately wake up the rendering loop again.
Fix this by moving the message removal to the beginning of the
doSomeWork method (as it prevents forgetting it in one of the
exit paths later).
PiperOrigin-RevId: 456259715
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
*** Original commit ***
Rollback of 07302a23bd
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...
***
PiperOrigin-RevId: 450453325
AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.
It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.
In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.
Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.
This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.
PiperOrigin-RevId: 450431146
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450410833
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450386627
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
This causes a bug where the forwarded selections are no longer
assumed equal and the child MediaPeriods will think they need
to reset streams even though the selection stayed the same.
Issue: Issue: google/ExoPlayer#10248
PiperOrigin-RevId: 449454038
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
Network type detection on these API levels couldn't be tested
yet because of a missing Robolectric feature. This was fixed by
the recent Robolectric upgrade and the restrictions can be removed.
This also requires to replicate the platform hack we rely on on
these API levels.
PiperOrigin-RevId: 448240431
The TrackSelector is released when the player is released. The
TrackSelector can be reused if TrackSelector.init() is called again.
PiperOrigin-RevId: 446439717
Some APIs from Android 12L were used either via reflection or
constants values were hard-coded. We can now use these APIs directly
since we upgraded the compile SDK version to 32.
PiperOrigin-RevId: 446167543
Overriding any methods of AnalyticsListener requires using the unstable
API. In future we can incrementally add AnalyticsListener methods to the
stable API.
PiperOrigin-RevId: 445420361
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
When downlading an adaptive asset, if an ExoPlaybackException happens
during track selection, the player raises an
UnsupportedOperationException which is not handled gracefully and can
crash the app main thread.
This change catches the error and forwards it to
DownloadHelper.Callback.onPrepareError() as an IOException.
PiperOrigin-RevId: 443015332
App code should get all of this information from TrackGroupInfo,
and should only need TrackGroup as a key to use for overrides.
PiperOrigin-RevId: 438840925
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
We will be migrating our track selection UI components to be
based on TracksInfo. We need DownloadHelper to expose TracksInfo
to make it compatible with such components.
PiperOrigin-RevId: 432474487
addTrackSelectionForSingleRenderer takes a list of legacy overrides,
which are then set on the supplied parameters one at a time to run
track selection. This allows multiple overrides for a single track
type to be applied in the download use case, despite it not being
possible to place such overrides directly into a single parameters.
For new style overrides, multiple overrides for the same track type
can be placed directly into a single parameters. Therefore we'll be
able to replace use of addTrackSelectionForSingleRenderer with use
of addTrackSelection, which is a much cleaner API. For this to work,
we need to make DownloadHelper apply multiple overrides in this case.
PiperOrigin-RevId: 432459834
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
DownloadHelper is in the ExoPlayer module, so there's no reason
why it can't use ExoPlayer specific track selections. That said,
we want our UI components to operate on generic
TrackSelectionParameters, and we want such UI components to be
useful for selecting tracks for download. To keep this interop,
it's necessary to have DownloadHelper accept generic
TrackSelectionParameters, or to require application code to
convert them. The first approach seems preferable!
PiperOrigin-RevId: 432158846
This constructor always does the wrong thing for non-adaptive groups
containing more than 1 track, because it'll incorrectly generate an
adaptive selection. Replace it with a constructor for specifying a
single track within the group instead.
PiperOrigin-RevId: 431673458
As evidenced by the somewhat awkward logic in PlayerControlView, the
previous design wasn't very friendly to expected usage. There will be
more usage when the track selection dialog components are migrated,
which would be similarly awkward without this change.
PiperOrigin-RevId: 431407675
*** Original commit ***
Rollback of caf62842c4
*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
PiperOrigin-RevId: 430905772
The AsyncronousMediaCodecAdapter should call MediaCodec.start()
on the same thread it calls MediaCodec.flush(), i.e. the playback
thread. This change removes the experimental flag that allowed
calling MediaCodec.start() from the callback thread.
The flag was flipped to true already.
PiperOrigin-RevId: 430689665
getCurrentTrackGroups and getCurrentTrackSelections are
retained for now, but moved from Player to ExoPlayer, to
ease the transition for some application code that currently
uses these methods.
PiperOrigin-RevId: 430036355
*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
Wire up MediaMetricsListener and add configuration to...
***
PiperOrigin-RevId: 429585773
The track type is derived solely from the content. It does
not depend on any runtime properties such as the player's
capabilities of user track selection. Hence it belongs in
TrackGroup rather than TrackGroupInfo.
Note that this avoids TrackSelectionOverride from having to
re-derive the track type internally.
PiperOrigin-RevId: 429303312
We need TracksInfo.hasTracksOfType to determine which tabs to
display in TrackSelectionDialog.
We need TrackGroupInfo.isAdaptiveSupported to determine whether
to allow multiple selection (check boxes) or not (radio buttons).
PiperOrigin-RevId: 428793739
This change makes sure played server side ads are skipped in a single period
timeline. It avoids creating an ad-MediaPeriodInfo for played postrolls and
creates a content info instead. It also sets the end position for content infos
that terminate the stream before the stream is actually finished. This prevents
the player from continue playing the remaining media delivered by the
MediaPeriod.
We also make sure that the discontinuity of played ads are not reported because
there is actually no discontinuity.
#minor-release
PiperOrigin-RevId: 428734387
The last used shared media period is reused after all media periods have been
released. In case the sample streams are already filled up, they need to be
reset or they download samples from the current position up to the seek
position. This causes long buffering states or load stuck exceptions.
A seek when reusing the shared period takes care for reseting the period or
internally seeks to the current position in the already available samples.
#minor-release
PiperOrigin-RevId: 428484187
We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
This adds some missing calls to verifyApplicationThread to
ExoPlayerImpl.
Now all public methods start with this call, except listener
registrations because registration after construction on a background
thread is allowed and supported.
PiperOrigin-RevId: 428009498
All the functionality of SimpleExoPlayer has moved to ExoPlayerImpl.
Hence, ExoPlayerImpl can fulfil its own name and become an ExoPlayer
implementation. As a result, ExoPlayer.Builder can return ExoPlayerImpl
directly without using SimpleExoPlayer at all.
#minor-release
PiperOrigin-RevId: 427947028
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
There are two sets of listeners in ExoPlayerImpl at the moment,
which can be merged together to use a single ListenerSet. This has
the added advantage that the events that were previously sent
through the ArraySet get additional guarantees provided by ListenerSet
(e.g. correct event ordering and onEvents triggered).
Also add missing constants for onEvents to ensure all Player.Listener
methods have an corresponding constant.
#minor-release
PiperOrigin-RevId: 427415349
This brings listener invocations closer together and removes
unnecessary methods.
Also fixes a bug where a change in track selection parameters only
queued a callback but never flushed it to actually inform the
listeners.
#minor-release
PiperOrigin-RevId: 427201691
In some cases (whose where we previously used EventListener),
AnalyticsCollector is registered as a listener to receive updates,
in other cases it is called directly.
Avoid this inconsistent handling by registering it as normal listener
and removing all callbacks that are handled by the normal listener flow.
The remaining direct usages of AnalyticsCollector calls are those
callbacks that have no equivalent in Player.Listener.
#minor-release
PiperOrigin-RevId: 427201525
With this change, MediaCodecAudioRenderer always configures MediaCodec
with max output channels set to 99 on API 32+.
#minor-release
PiperOrigin-RevId: 427192801
SimpleExoPlayer used to register a listener on ExoPlayerImpl for
the old EventListener callbacks. Now both classes are merged, this is
no longer needed and should be removed in favor of calling methods
directly.
#minor-release
PiperOrigin-RevId: 427187875
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
Wire up MediaMetricsListener and add configuration to disable it.
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#...
***
PiperOrigin-RevId: 427131438
*** Original commit ***
Rollback of d93b0093ae
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet...
***
PiperOrigin-RevId: 427131338
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (e
***
PiperOrigin-RevId: 426997821
*** Original commit ***
Wire up MediaMetricsListener and add configuration to disable it.
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#minor-release
***
PiperOrigin-RevId: 426997342
This ensures Kotlin usages of these IntDef annotations in the 'old'
position will continue to compile.
'Frequently used' is a subjective judgement. I have a parallel change
that marks all the other public IntDefs in the library as TYPE_USE
(those that I've judged to be 'rarely used' by apps).
A follow-up change will fix the positions of existing usages to be as if
they're only TYPE_USE.
#minor-release
PiperOrigin-RevId: 426427334
This is a breaking change if the annotation itself is in use in Kotlin
code. It's judged that the IntDefs in this commit are unlikely to be
referred to often in Kotlin code. This is because they're either:
- Related to esoteric parts of the library, or
- In a common part of the library but only returned from methods (and
never passed to callback methods).
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426410237
This is not backwards compatible if the @SelectionReason annotation is
used in Kotlin code, but before this change there aren't many library
surfaces that return a value annotated with @SelectionReason, so it
seems relatively unlikely that it is in use in any/many apps.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426409877
This is only used inside AudioFocusManager, it doesn't need to public.
Also mark it TYPE_USE and update the position to match.
#minor-release
PiperOrigin-RevId: 426407790
This is only used in DefaultAudioSink, so we could move it there and
make it private - but at that point we might as well refer to the
underlying AudioManager constants instead.
#minor-release
PiperOrigin-RevId: 426407661
This only changes IntDefs that cannot be used by apps because they're
either private or package-private.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426372273
This change makes GlUtil.Program an outer class named GlProgram,
and also moves private static helpers as well as the inner classes
Attribute and Uniform which were only used by GlUtil.Program to
GlProgram. Other static utility methods remain in GlUtil.
No functional changes intended.
PiperOrigin-RevId: 426119299
The longer list of targets is only necessary for backwards
compatibility with existing Kotlin code that will stop compiling
if the position of the annotation becomes 'wrong' by marking it only
TYPE_USE. Since none of these IntDefs have been released (except in
media3 alpha1) we don't need to maintain this compatibility.
Also add a comment to all the places that *do* need the longer list of
targets, in order to explain why it's there and discourage copy-pasting
when defining new IntDefs in future.
Also fix some single-element arrays to remove the array notation.
#minor-release
PiperOrigin-RevId: 426108537
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#minor-release
PiperOrigin-RevId: 426099872
This allows the same DefaultMediaSourceFactory instance to be used as
the contentMediaSourceFactory inside
ImaServerSideAdInsertionMediaSource.
PiperOrigin-RevId: 425846609
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (example: ExoPlayerImpl.setListener was renamed to
setEventListener).
#minor-release
PiperOrigin-RevId: 425823095
In some cases we create empty playback metrics with no corresponding
events (e.g. when an app seeks to a new media item and immediately
releases the player). There is no benefit in having completely empty
metrics entries, so it's cleaner to not report them in such cases.
#minor-release
PiperOrigin-RevId: 425609010
Add a constructor that takes a DrmSessionManagerProvider.
This allows R8 to strip the default implementation.
#minor-release
PiperOrigin-RevId: 425330083
Some phone with limited memory can't allocate bigger
shared memory buffers.
This might or might not be related to Binder's 1M
transaction limit.
Tested on Pixel 4 by setting the minimum buffer size to
1h.
https://github.com/google/ExoPlayer/issues/9712
#minor-release
PiperOrigin-RevId: 425324536
Enforcing the correct thread usage has been enabled since 2.13.0.
Opting-out of this enforement is dangerous as it can hide very hard
to debug bugs.
PiperOrigin-RevId: 424815808
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 424602011
AnalyticsCollector can't be null when passed into ExoPlayerImplInternal,
so there is no need to pass it around as nullable.
PiperOrigin-RevId: 424594031
Two of the sessions are finished at the same time in the test
and the order of the corresponding callbacks depends on the randomly
generated session string and the order these strings are stored in a
HashSet.
Update test to assert both callbacks are called and they contain the
right arguments, but don't assert on the order of these two callbacks.
PiperOrigin-RevId: 424548819
Ad playback shouldn't be affected by manual speed adjustments set
by the user. This change enforces unit speed for ad playback.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424546258
This only affects playbacks using the
experimentalUseProgressiveMediaSourceForSubtitles method.
Also update the SingleSampleMediaSource instantiation to be more
similar, to try and highlight differences like this in future.
PiperOrigin-RevId: 424545980
In some cases we need to update the PlaybackParameters at period
boundaries, for example when switching from live to VOD and live
playback speed adjustment was still active at the point of switching.
Currently, we send the update when the playing MediaPeriod changes in
EPII, which is slightly too late because the new speed gets only applied
after the entire existing AudioTrack buffer has been played out.
We can time the update slightly better by updating the values at the
point where we change the reading period. This makes the update slightly
too early because it also applies to all samples currently in the
decoder. But generally, this is a lot better because the time spent
in the decoder is likely to be considerably lower than the duration of
the AudioTrack buffer.
Note that this change isn't perfectly aligning to the period boundary,
but reduces the number of samples with the wrong speed to a minimum.
If we are getting around to add additional code that allows updating
the speed at exactly the boundary, it also needs to be triggered from
the reading period update, so the new code location is also helpful in
the future.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424540551
To avoid the `MediaPeriodQueue`to discard the reading period, we can set the next ad of an ad group early and then (possibly) only change it's duration once we receive the actual duration. This way we avoid a rebuffering as a result of the reading period being discarded.
The change also takes care to properly set ad break and their durations when we join the live stream at the moment when an ad is playing.
PiperOrigin-RevId: 423163467
We currently only end sessions on Timeline updates if the associated media
is no longer in the playlist. But we should also end all sessions that are
finished as a result of the timeline update (similar to how this is done for
discontinuities). This issue was introduced by 394ab7bcfd
PiperOrigin-RevId: 423075855
We currently don't check which session is causing a network transfer
(it could be a preloaded item in a playlist). To clearly associate
network transfer data with sessions, we need to keep track of
transferred bytes and transfer time per session.
PiperOrigin-RevId: 422867845
With this change, the MediaCodecAudioRenderer configures the MediaCodec
to not downmix audio only if spatialization can be applied. This way,
decoders who are downmixing by default are left doing so when
spatialization cannot be applied. The renderer re-initializes the codec
when spatialization properties change mid-playback.
PiperOrigin-RevId: 422822952
Currently, we keep the values for dropped/played frames, audio underruns
and current formats from the last session, causing double reporting
of counters and wrong track change reasons for formats. All these
values should be reset when the active session is finished, so that the
new session can start from scratch.
PiperOrigin-RevId: 422798406
Currently, we always end the current session if onSessionFinished is
called. However, the finished session may not be the active one (for
example when discarding prebuffered items in a playlist). To make this
code more robust, we can save the active session id explicitly and only
end this session.
PiperOrigin-RevId: 422788542
This change enables the ImaServerSideAdInsertionMediaSource for multi-period content. The global ad playback state is split into pieces for each period and the window and period durations are calculated accordingly in the ServerSideAdInsertionTimeline.
For multi-period live content (DASH), the ad playback state is not set with this change. This is deferred to a follow up CL. Splitting is very tricky. For each timeline update the windowStartTimeUs may vary for some milliseconds relative to the start of the period.positionInWindowUs. This requires to either introduce some fuzzy logic or to choose a different approach than for multi-period VOD. Because mistakes within the playback states of subsequent moving live windows produces crashes, it seems sensible to defer this for now and keep this change in a separate future CL (unblock further work, easy to rollback).
In this state, live DASH stream are working and the ad overlay is placed over the player correctly bu the SDK. However, ads are not reported by the position discontinuity event. Similarly, the player.isPlayingAd() does never returns true when a ad period is playing.
PiperOrigin-RevId: 422539770
The MediaMetricsListener currently just looks at the mime type and
doesn't use the inference based on the URI if no mime type is set.
Also change default type to OTHER to avoid classifying streams from
URLs without clear file extension as progressive.
PiperOrigin-RevId: 422373381
Adaptive video and audio selections will be limited to formats with
the same level of DecoderSupport and HardwareAccelatationSupport, unless
specifically allowed by new flags.
If different levels of decoder support are available, prefer primary
over fallback decoders and hardware-accelerated over software decoders
(in this order). For video, also prefer more efficient codecs, if both
are supported by hardware-accelerated primary decoders.
Issue: google/ExoPlayer#4835
Issue: google/ExoPlayer#9565
PiperOrigin-RevId: 422345048
This change moves the video track selection to the generic
selection method introcuced for audio and text. This ensures
we can apply the same criteria for fixed and adaptive video
track selections. Implicitly, this reorders the preferences
for adaptive tracks to give non-quality preferences (like
preferred MIME type or preferred role flags) a higher priority
than number of tracks in the selection.
Issue: google/ExoPlayer#9519
PiperOrigin-RevId: 422310902
This does currently only happen by chance in replaceStream (called from
enable) if the stream previosly played read until C.TIME_END_OF_SOURCE.
enable already makes all changes done in resetPosition (except resetting
the reading position), so it's less error-prone and makes the intention
clearer if the same code is called from both enable and resetPosition.
The effect of this bug was quite limited because the numerical value
of readingPositionUs was only relevant for periods with changing
durations and server-side inserted ads.
PiperOrigin-RevId: 422300690
We currently run (almost) the same code for all track types.
De-duplicate this by using a single method that takes functional
interfaces for track-type dependent logic.
This has the benefit that all track-type dependent logic is
contained within their subclasses and the generic logic doesn't
need to make any assumption about the eligibility of tracks for
selection or adaptation, and doesn't need to access Parameters.
Make this change for audio and text only for now. Video can
be updated in a subsequent change.
PiperOrigin-RevId: 421811411
Live speed adjustment is used for all live playback at the moment,
but has no user visible effect if the media is not played with low
latency. To avoid unnecessary adjustment during playback without
benefit, this change restricts the live speed adjustment to cases
where either the user requested a speed value in the MediaItem or the
media specifically defined a low-latency stream.
Issue: google/ExoPlayer#9329
PiperOrigin-RevId: 421514283
This ensures we test the API level specific logic, in particular
around 5G-NSA detection.
Robolectric has a remaining bug that it doesn't support listening
to service state changes. Hence, we need to ignore some tests on
these API levels still until this is fixed.
PiperOrigin-RevId: 421505951
The media codec renderers have fallback logic in getDecoderInfos
to assume that E-AC3 decoders can handle the 2D version of E-AC3-JOC and
that H264/H265 decoders can handle some base layer of Dolby Vision
content. Both fallbacks are useful if there is no decoder for the
enhanced Dolby formats.
Both fallbacks are not applied during track selection at the moment
because the separate MediaCodecInfo.isCodecSupported method verifies
that the mime type corresponding to format.codecs is the same as the
decoder mime type (which isn't true for the fallback case).
To fix the fallback logic, we can just completely remove this additional
check because it's not needed in the context of this method that is only
called after we already established that the decoder can handle the
format.sampleMimeType.
In addition, we need to map the Dolby Vision profiles to the equivalent
H264/H265 profile to make the codec profile comparison sensible again.
PiperOrigin-RevId: 420959104
SampleQueues may be released in the context of a finally block
after an out of memory error. Allocating in that scenario can
throw yet a new OutOfMemoryError. By safely releasing SampleQueue
memory, we increase the possibility of handling the error
gracefully.
PiperOrigin-RevId: 420859022
The draw method was disabling vertex attrib arrays but not re-enabling them. Remove the call to disable the vertex attrib arrays so that then remain enabled after the program is created.
Manually verified by setting the surface type to spherical in the demo app and playing a spherical sample video.
Issue: google/ExoPlayer#9782
PiperOrigin-RevId: 420707503
* @Override is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs. @CryptoType is a TYPE_USE annotation, so should appear after modifiers and directly before the type.
PiperOrigin-RevId: 418811744
This more closely matches the pattern we have for all implementations
except DefaultMediaSourceFactory (e.g. ProgressiveMediaSource.Factory)
and other factory interfaces like (Http)DataSource.Factory.
PiperOrigin-RevId: 417826803
This involves stabilising AdsLoader and ImaAdsLoader, as well
as (Default)MediaSourceFactory and the following methods on
ExoPlayer.Builder:
* setMediaSourceFactory
* setAdsLoaderProvider
* setAdViewProvider
Most of ImaAdsLoader.Builder and (Default)MediaSourceFactory remain
unstable for now.
PiperOrigin-RevId: 417814106
Some have been deprecated since 2.13.0
([commit](5b9fa7d7d9)):
* `setDrmSessionManager(DrmSessionManager)`
* `setDrmHttpDataSourceFactory(HttpDataSource.Factory)`
* `setDrmUserAgent(String)`
And the rest have been deprecated since 2.12.0
([commit](d1bbd3507a)):
* `setStreamKeys(List<String>)`
* `createMediaSource(Uri)`
PiperOrigin-RevId: 417622794
For the media3 codebase the timeline images need to be under the common module.
Verified results in an empty commit for ExoPlayer GitHub.
PiperOrigin-RevId: 416850853
To support multi-period content we need to store AdPlaybackStates and SharedMediaPeriod by the periodUid as a key. While after this no-op CL, we still only support single-period content, storing these resources by periodUid is the ground work for multi-period support being added in an follow-up CL.
PiperOrigin-RevId: 416836445
Keep the old interface deprecated so any app code implementing it by
name (rather than with a lambda) will continue to work.
PiperOrigin-RevId: 416816566
We check the fraction of the available duration we have already
buffered for live streams to see if we can increase the quality.
This fraction compares against the overall available media duration
at the time of the track selection, which by definition can't include
one of the availabe chunks (as this is the one we want to load next).
That means, for example, that for a reasonable live offset of 3 segments
we can at most reach a fraction of 0.66, which is less than our default
threshold of 0.75, meaning we can never switch up.
By subtracting one chunk duration from the available duration, we make
this comparison fair again and allow all live streams (regardless of
live offset) to reach up to 100% buffered data (which is above our
default value of 75%), so that they can increase the quality.
Issue: google/ExoPlayer#9784
PiperOrigin-RevId: 416791033
Before the introduction of the MediaCodecAdapter, users could get
access directly to the MediaCodec instance from
MediaCodecRenderer.getCodec() and then retrieve the codec metrics.
This change exposes MediaCodec.getMetrics() on the MediaCodecAdapter.
Issue: google/ExoPlayer#9766
#minor-release
PiperOrigin-RevId: 416343023
*** Original commit ***
Rollback of 3c4c1f4774
*** Original commit ***
Add capability flags for hardware and decoder support
Issue: google/ExoPlayer#9565
***
***
PiperOrigin-RevId: 416285603
*** Original commit ***
Rollback of d7867800dc
*** Original commit ***
Don't sort decoders by format support in supportsFormat
This is a no-op change that updates supportsFormat to use the
decoder list before it's reordered by format support. Instead,
supportsFormat iterates through the decoders listed in their
original priority order as specified by the MediaCodecSelector.
The end result is identical.
This is n...
***
PiperOrigin-RevId: 416269130
*** Original commit ***
Don't sort decoders by format support in supportsFormat
This is a no-op change that updates supportsFormat to use the
decoder list before it's reordered by format support. Instead,
supportsFormat iterates through the decoders listed in their
original priority order as specified by the MediaCodecSelector.
The end result is identical.
This is necessary groundwork for a subsequent change that will
indicate in Capabilities whether the decoder that suppports the
format is the primary one as specifi
***
PiperOrigin-RevId: 416170612
This change adds a delegate class that loads and forwards calls
to a Spatializer with reflection, so that we can use the Spatializer
API before we update the compile SDK target to 32.
PiperOrigin-RevId: 416027289
*** Original commit ***
Make audio track min buffer size configurable.
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
***
PiperOrigin-RevId: 415469179
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 415268938
This is a no-op change that updates supportsFormat to use the
decoder list before it's reordered by format support. Instead,
supportsFormat iterates through the decoders listed in their
original priority order as specified by the MediaCodecSelector.
The end result is identical.
This is necessary groundwork for a subsequent change that will
indicate in Capabilities whether the decoder that suppports the
format is the primary one as specified by the MediaCodecSelector
(i.e., the one at index=0 in the lists that are now used).
Issue: google/ExoPlayer#9565
PiperOrigin-RevId: 414971986
Configure MediaCodec in API 32+ to always output 99 channels
so that we use the audio is spatialized, if the platform can apply
spatialization to it.
In a follow-up change, the output channel count will be set based on the
device's spatialization capabilities.
PiperOrigin-RevId: 414751543
`DefaultAudioSink` already has 3 telescoping
constructors and an other one would be have been
needed to add a buffer size tuning option.
PiperOrigin-RevId: 414703366
The existing code creates an imbalance between `inputBufferCount` and
`droppedBufferCount` by adding 'dropped source buffers' to
`droppedBufferCount` but not to `inputBufferCount`. This results in
assertion failures in `DashTestRunner`.
PiperOrigin-RevId: 414672175
It's been observed that some devices fail when releasing a secure codec
attached to a surface and immediately trying to create a new codec
(secure or insecure) attached to the same surface. This change catches
all exceptions thrown during codec creation, sleeps for a short time,
and then retries the codec creation. This is observed to fix the problem
(we believe this is because it allows enough time for some background
part of the previous codec release operation to complete).
This change should have no effect on the control flow when codec
creation succeeds first time. It will introduce a slight delay when
creating the preferred codec fails (while we sleep and retry), which
will either delay propagating a permanent error or attempting to
initialize a fallback decoder. We can't avoid the extra delay to
instantiating the fallback decoder because we can't know whether we
expect the second attempt to create the preferred decoder to succeed or
fail. The benefit to always retrying the preferred decoder creation
(fixing playback failures) outweighs the unfortunate additional delay
to instantiating fallback decoders.
Issue: google/ExoPlayer#8696
#minor-release
PiperOrigin-RevId: 414671743
When calling Android's Log class directly, there's a LongLogTag
lint check that detects tags over the 23 char limit, however it
cannot detect long log tags in ExoPlayer due to the way that we
log via our own Log class. This commit adds @Size annotations to
enforce the same rule.
PiperOrigin-RevId: 413976364
On the Sony Android TV device where this was originally reproducible on
Android L, on Android N there is an E-AC3 decoder listed which handles
the stream correctly. The workaround is harmless anyway but adding the
API version restriction means it will be obvious it can be removed once
we bump our min API to 24 or above in the future.
PiperOrigin-RevId: 413967443
Hardware audio decoders aren't really a thing, particularly on older
devices. SOC vendors do sometimes provide their own software decoders
though. Hence we update the approximation to assume that audio
decoders on older devices are software.
PiperOrigin-RevId: 413757859
Allowing duplicate groups caused some other code working with the
array to use reference equality comparison. This is error-prone,
easily forgotten (e.g. when using the TrackGroups in a map) and
causes bugs when TrackGroups are serialized to disk or to another
process.
All TrackGroups created by ExoPlayer are already unique and custom
code creating TrackGroupArrays with identical groups can easily
distringuish them by adding an id to each group.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413617005
This allows to give TrackGroups an identifier. The underlying goal is
to provide a way to make otherwise identical TrackGroups
distinguishable.
Also set this id in all internal sources that may produce identical
TrackGroups in certain edge cases.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413430719
Currently we prefer technical preferences set in the Parameters over
content preferences implied by the media. It proably makes more
sense in the opposite order to avoid the situation where a
non-default track (e.g. commentary) is selected just because it
better matches some technical criteria.
Also add comments explaining the track selection logic stages.
PiperOrigin-RevId: 412840962
This is already called in GlUtil.Program().
Tested by confirming that the demo-gl target still runs as expected.
Refactoring change only. No intended functional changes.
PiperOrigin-RevId: 412308564
And also tweak existing role flag logic to strictly prefer perfect
matches over partial matches.
Caveat: Video role flags only supported for fixed track selections
(same issue as Issue: google/ExoPlayer#9519).
Issue: google/ExoPlayer#9402
PiperOrigin-RevId: 412292835
This allows to check if the media metrics service is available outside
the actual constructor and to fail gracefully if it is missing.
PiperOrigin-RevId: 412232425
This inheritance is really confusing because ExoPlayerImpl is not
a full Player interface implementation. It also claims to be an
ExoPlayer implementation in the Javadoc which isn't true in its
current state.
Removing the inheritance also allows to clean up some unused methods.
PiperOrigin-RevId: 411756963
Before this change ExpPlayerImplInternal dropped a change of the playing period when a change in the timeline occurred that actually changed the playing period but we don't want to update the period queue. This logic also dropped the update of a skipped server side inserted preroll ad for which we want the periodQueue to 'seek' to the stream position after the preroll ad and trigger a SKIP discontinuity.
This change now introduces an exception so that a skipped SSI ad is still causing an update in the period queue which leads to a 'seek' and a discontinuity of type SKIP.
PiperOrigin-RevId: 411607299
Document that apps should retain `GlUtil.Program` while the program is in use,
and keep a reference to attributes/uniforms within the program to make sure
they don't get GC'd causing any allocated buffers passed to GL to become
invalid.
Tested manually by running gldemo and transformer.
PiperOrigin-RevId: 411516894
Currently, DrmSessionManager takes player specific values (= the
playback looper) through (pre)acquireSession calls and requires
the caller to pass in the same values every time.
Instead, we can configure the DrmSessionManager for playback with
a player once before it's being used. We can't simply extend the
prepare() method as prepare may be called before the player is
created to prewarm the DrmSessionManager.
The new method also takes a PlayerId which is bound to the lifetime
of the player similar to the playback looper.
To avoid breakage of custom MediaSources with DRM, we can keep the
old the SampleQueue.createWithDrm method as deprecated.
PiperOrigin-RevId: 410998240
We verified there is a race condition in the
AsynchronousMediaCodecAdapter when flushing the adapter
multiple times. The race condition results in calling MediaCodec.start()
and MediaCodec.flush() in parallel and that makes the MediaCodec
raise an exception.
This changes the default behavior to call MediaCodec.start() on the
same thread after MediaCodec.flush() to avoid the race condition.
#minor-release
PiperOrigin-RevId: 410509388
Currently, TrackSelectionOverrides are documented as being applied
per track type, meaning that one override for a type disables all
other selections for the same track type. However, the actual
implementation only applies it per track group, relying on the
track selector to never select another renderer of the same type.
This change fixes DefaultTrackSelector to fully adhere to the
TrackSelectionsOverride definition. This solves problems when
overriding tracks for extension renderers (see Issue: google/ExoPlayer#9675)
and also simplifies a workaround added to StyledPlayerView.
#minor-release
PiperOrigin-RevId: 409121711
The asynchronous MediaCodec adapter queues input buffers in a
background thread. If a codec queueuing operation throws an exception,
the buffer enqueuer will store it as a pending exception and re-throw it
the next time the adapter will attempt to queue another input buffer.
The buffer enqueuer's flush() and shutdown() may throw an exception if
the pending error is set. This is subject to a race-condition in which
the pending error can be set while the adapter is flushing/shutting down
the enqueuer, e.g., if an input buffer is still being queued and the
codec throws an exception. As a result, the adapter cannot flush or
shutdown gracefully.
This change makes the buffer enqueuer to ignore any pending error
when flushing/shuttinf down so that the adapter can flush/release
gracefully even if a queueing error was detected.
PiperOrigin-RevId: 409113054
The Javadoc of DefaultTrackSelector can be shortened as it's not the
right place to document detailed options of the Player track selection
parameters.
The documentation page about track selection is updated to the new
APIs and extended with most relevant options and information needed
to work with ExoPlayer's track selection API.
#minor-release
PiperOrigin-RevId: 409088989
MediaSource can be reused with other Player instances after they
have been released, so we need to set the PlayerId when preparing
the source. Access can mostly be handled by the implementation in
BaseMediaSource.
PiperOrigin-RevId: 408878824
The setters in the Builder are already deprecated and using the
old getter is error-prone as they only return the overrides set
with the deprecated setters.
Issue: google/ExoPlayer#9665
PiperOrigin-RevId: 408817640
We can rename the existing setIndex method to a more generic init
as this method is only called by EPII and implemented by BaseRenderer
anyway.
PiperOrigin-RevId: 408616055
The platform class is only available from API 31, so we need
a generic wrapper that can be used on all API levels. The wrapper
essentially provides an identifier for a player instance, so naming
it accordingly.
PiperOrigin-RevId: 408292802
And in a couple of related places.
This is for consistency with the rest of the codebase where
we exclusively use indices.
#minor-release
PiperOrigin-RevId: 408273372
When operating the MediaCodec in asynchronous mode, after a
MediaCodec.flush(), we start MediaCodec in the callback thread,
which might trigger errors in some platforms. This change adds an
experimental flag to move the call to MediaCodec.start() back to the
playback thread.
PiperOrigin-RevId: 407801013
When we have multiple overrides for TrackGroups associated with
one renderer, we need to look at all of them to find the non-empty
one. Empty ones should only be used to remove previously selected
tracks for this group and otherwise be ignored.
Currently this is broken because the first override (no matter if
it's empty or not) is used as the final selection for this renderer.
Issue: google/ExoPlayer#9649
#minor-release
PiperOrigin-RevId: 407792330
* Remove GlUtil.Program String[] constructor to unify and just use the
String constructor.
* Add getAttributeArrayLocationAndEnable() to simplify things a tiny bit.
* Increase usage of constant values.
PiperOrigin-RevId: 407570340
Add protected method DefaultRenderersFactory.getCodecAdapter(), so that
subclasses of DefaultRenderersFactory that override
buildVideoRenderers() or buildAudioRenderers() can access the
DefaultRenderersFactory codec adapter factory and pass it to
MediaCodecRenderer instances they may create.
#minor-release
PiperOrigin-RevId: 407345431
Where this introduced an inconsistency (e.g. assigning to something
called `windowIndex`), I generally renamed the transitive closure of
identifiers to maintain consistency (meaning this change is quite
large). The exception is code that interacts with Timeline and Window
directly, where sometimes I kept the 'window' nomenclature.
#minor-release
PiperOrigin-RevId: 407040052
The return values of AudioManager.getPlaybackOffloadSupport are the same as the values defined in C.AudioManagerOffloadMode.
PiperOrigin-RevId: 406817413
Currently, clipping errors are never thrown if we already have a
MediaPeriod. This may happen for example for ProgressiveMediaSource
where we need to create a MediaPeriod before knowing whether clipping
is supported. Playback will still fail, but with unrelated assertion
errors that are hard to understand for users.
Fix this by setting the pending error on the ClippingMediaPeriod.
#minor-release
Issue: Issue: google/ExoPlayer#9580
PiperOrigin-RevId: 406809737
This helps to prevent issues where decoders can't handle negative
timestamps. In particular it avoids issues when the media accidentally
or intentionally starts with small negative timestamps. But it also
helps to prevent other renderer resets at a later point, for example
if a live stream with a large start offset is enqueued in the playlist.
#minor-release
PiperOrigin-RevId: 406786977
Initialize default components lazily in ExoPlayer.Builder to avoid
redundant component instantiations, useful in cases where apps
overwrite default components with ExoPlayer.Builder setters.
The fields in ExoPlayer.Builder are wrapped in a Supplier (rather than
just making then nullable and initializing them in
ExoPlayer.Builder.build()) so that we maintain the proguarding
properties of this class.
PiperOrigin-RevId: 406345976
Only deprecated references remain.
Usages of the deprecated methods will be migrated in a follow-up change.
#minor-release
PiperOrigin-RevId: 405927141
Also add a setRenderersFactory() method, so that all constructor-provided
components can also be passed via setters.
This comment already appears on the constructor that takes all
components, but it applies to these ones as well.
PiperOrigin-RevId: 405917343
Our package-info.java files are annotated with @NonNullApi which results
in everything being non-null by default, so this annotation is never
needed.
#minor-release
PiperOrigin-RevId: 405864737
