Some devices just don't work very well with the synchronous
model, but are currently still excluded from our approximate
API 31 check. This change allows to include additional devices
or device groups by passing in the Context to the default
adapter.
It also adopts the workaround added in ebceee08c6
for Fire TV Smart devices that exhibit this issue.
PiperOrigin-RevId: 614642545
(cherry picked from commit e4a55844d0)
Some FireOS6 devices ask to force the external surround global
flag and ignore any signals from the HDMI connection.
This is the equivalent change of e341944d1e
PiperOrigin-RevId: 614634499
(cherry picked from commit 410c0492cc)
Using the more accurate check available on later API versions
first is likely better than falling back to a fallback solution
from older API versions.
PiperOrigin-RevId: 614612628
(cherry picked from commit 18cbbf3850)
Renderers may be enabled for subsequent media items as soon as the current media item's renderer's isEnded() returns true. When a renderer is being enabled and the player is 'playing', that renderer is also started. When playing a mixed playlist of images and content with audio & video, the player may skip some image items because the early-starting of the audio renderer causes a clock update.
A solution is to only start the "early-enabled" renderers at the point of media transition and add a condition on DefaultMediaClock to use the standalone clock when reading-ahead and the renderer clock source is not in a started state.
Issue: androidx/media#1017
PiperOrigin-RevId: 613231227
(cherry picked from commit 638b2a3c86)
The removed check searched for a player command inside a list of
session commands, which is not allowed by the IntDef definition
and only worked because both types map to a Java int.
PiperOrigin-RevId: 612758442
(cherry picked from commit c79ac5ba21)
When the controller replaces the current item, the masking position will be changed to the default position of the new item for a short while, before the correct position comes from the session. This will interrupt the current position fetched from the controller when the playback doesn't interrupted by the item replacing.
Issue: androidx/media#951
PiperOrigin-RevId: 611417539
(cherry picked from commit 1bdc58de0b)
This change aims to prioritise tracks that have a 'smooth enough for
video' frame rate, without always selecting the track with the highest
frame rate.
In particular MP4 files extracted from motion photos sometimes have two
HEVC tracks, with the higher-res one having a very low frame rate (not
intended for use in video playback). Before this change
`DefaultTrackSelector` would pick the low-fps, high-res track.
This change adds a somewhat arbitrary 10fps threshold for "smooth video
playback", meaning any tracks above this threshold are selected in
preference to tracks below it. Within the tracks above the threshold
other attributes are used to select the preferred track. We deliberately
don't pick the highest-fps track (over pixel count and bitrate), because
most users would prefer to see a 30fps 4k track over a 60fps 720p track.
This change also includes a test MP4 file, extracted from the existing
`jpeg/pixel-motion-photo-2-hevc-tracks.jpg` file by logging
`mp4StartPosition` in
[`MotionPhotoDescription.getMotionPhotoMetadata`](b930b40a16/libraries/extractor/src/main/java/androidx/media3/extractor/jpeg/MotionPhotoDescription.java (L123))
and then using `dd`:
```
mp4StartPosition=2603594
$ dd if=jpeg/pixel-motion-photo-2-hevc-tracks.jpg \
of=mp4/pixel-motion-photo-2-hevc-tracks.mp4 \
bs=1 \
skip=2603594
```
----
This solution is in addition to the `JpegMotionPhotoExtractor` change
made specifically for these two-track motion photos in
5266c71b3a.
We will keep both changes, even though that change is not strictly
needed after this one, because adding the role flags helps to
communicate more clearly the intended usage of these tracks. This
change to consider FPS seems like a generally useful improvement to
`DefaultTrackSelector`, since it seems unlikely we would prefer a 5fps
video track over a 30fps one.
Issue: androidx/media#1051
PiperOrigin-RevId: 611015459
(cherry picked from commit c7e00b12b4)
Some devices supporting Performance Points for decoder coverage are missing coverage over the CDD requirements for H264. For these cases ExoPlayer should fall back to legacy resolution and frame rate support checks. If there is a stream evaluated as a PerformancePointCoverageResult of COVERAGE_RESULT_NO, then ExoPlayer checks for coverage of the 720p H264 CDD requirement.
Issue: google/ExoPlayer#10898
Issue: androidx/media#693
Issue: androidx/media#966
PiperOrigin-RevId: 609740128
(cherry picked from commit 23a301fc5d)
This change makes ExoPlayerImplInternal.releaseInternal() unblock the
app thread if a runtime exception is thrown while releasing components
from the playback thread.
Before this change, if a runtime exception occurred during releasing
components in the playback thread, ExoPlayer.release() would wait for
`releaseTimeoutMs` and then raise a player error. With this change,
the player error is reported only when the playback thread is blocked
but if there is a runtime exception, the application thread is
unblocked.
The impact of this change is potentially fewer ANRs on
ExoPlayer.release() at the expense of less error reporting.
PiperOrigin-RevId: 609702549
(cherry picked from commit 0480eff6a1)
We forgot to add it when we added AudioSink.release(). The commit
includes a test that ensures ForwardingAudioSink overrides all the
methods defined in the AudioSink interface.
PiperOrigin-RevId: 609402258
(cherry picked from commit 440d2ab162)
If the reading period has already advanced and a track reselection procs that only affects the reading period media, then ExoPlayer may try and apply the reading period's track selection incorrectly unto the playing period. ExoPlayer should apply the playing period's track selection to the playing period instead.
PiperOrigin-RevId: 609375077
(cherry picked from commit 4192924622)
If render error occurs due to AudioTrack initialization failure in offload mode, then ExoPlayer should allow retry as subsequent attempt will be with DefaultAudioSink disabling offload.
PiperOrigin-RevId: 609304897
(cherry picked from commit 9046f2edb6)
The `PreloadMediaPeriod.selectTracksForPreloading` can be called for multiple times at the preloading stage (before the period is being played). For example, when the period resumes preloading. This change fix the assertion failure in `ProgressiveMediaPeriod.selectTracks` caused by the wrong implementation of `PreloadMediaPeriod.selectTracksForPreloading` when it is trying to retain the previously preloaded streams.
Also the `TrackSelectorResult` parameter is changed to a list of `ExoTrackSelection`. We should compare the selections only rather than considering the `RendererConfiguration` in the `TrackSelectorResult` to decide whether to retain the streams, as for preloading case the renderers haven't consumed the samples yet.
PiperOrigin-RevId: 609126868
(cherry picked from commit d952a06214)
Fixes an issue caused by no support for negative audio PTS and edit lists
in FrameworkMuxer, Android versions before 11
PiperOrigin-RevId: 607690507
(cherry picked from commit e43f96687c)
The behaviour and docs of `playUntilPosition` were changed in
00c7a9bcbb.
This change also affects `playUntilStartOfMediaItem` (since it delegates
to `playUntilPosition`), so the same doc change should also be made
here.
#minor-release
PiperOrigin-RevId: 607364897
(cherry picked from commit fa3212e73e)
The original change missed copying the newly added flag in `buildUpon()`, which
caused some test flakes.
PiperOrigin-RevId: 607232373
(cherry picked from commit ae0da442b1)
VideoFrameProcessor requires every input frame to be registered before they are
rendered to its input Surface. This CL adds the option to register the input
frame only once. This is useful for camera inputs where not all input frames
come with changing FrameInfo.
PiperOrigin-RevId: 606294894
(cherry picked from commit 216f3fedb8)
Previously, we missed the BT2020->BT709 color-space conversion.
A user-visible impact of this is that red and green channels used to be
undersaturated, but now are more correctly saturated.
PiperOrigin-RevId: 605411926
(cherry picked from commit a5e47982f4)
Change the file extension retrieval back to how it was before 5488d33da8 to reduce the change of false negatives in `isImage()`
PiperOrigin-RevId: 605281186
(cherry picked from commit 4d29d8f012)
If nullness should result in an exception, we should throw as soon as possible,
so that stack traces are easier to follow.
Did a quick scan of media3.effect+transformer and this covers all uses of
peek that immediately throw there.
PiperOrigin-RevId: 603393366
(cherry picked from commit dd7846ee1c)
VideoFrameProcessor treats BT601 and BT709 as roughly equivalent now, so we
shouldn't be making checks that assume BT709 <-> requires tone-mapping.
Also, the color transfer is a better determinant for tone-mapping than color range, so use just the transfer to determine if tone-mapping is required.
PiperOrigin-RevId: 603083100
(cherry picked from commit cebe6d8ba5)
`Uri.appendQueryParameter` is documented to encode its arguments, so
calling `Uri.encode` beforehand results in double-encoding.
Issue: androidx/media#1075
#minor-release
PiperOrigin-RevId: 604995441
(cherry picked from commit 7ebfed505c)
The track id must be the index in the list of published tracks
as it's used as such elsewhere. This is currently not true if we
skip an empty track as all subsequent tracks get a wrong or even
invalid id.
#minor-release
PiperOrigin-RevId: 604929178
(cherry picked from commit 5f9c96ab53)
Relax the regex to only check for hyphen which is required by the specification.
Issue: androidx/media#1028
#minor-release
PiperOrigin-RevId: 604719300
(cherry picked from commit 138532e3fd)
The current implementation of `JpegMotionPhotoExtractor.sniff` returns
`true` for any image with Exif data (not just motion photos). Improving
this is tracked by b/324033919. In the meantime, when we 'extract' a
non-motion photo with `JpegMotionPhotoExtractor`, the result is
currently a single empty image track and no video track (since there's
no video, since this isn't a motion photo). This 'empty' image track
is usually used to transmit metadata about the video parts of the
image file (in the form of `MotionPhotoMetadata`), but this metadata is
also (understandably) absent for non-motion photos. Therefore there's
no need to emit this image track at all, and it's clearer to emit no
tracks at all when extracting a non-motion photo using
`JpegMotionPhotoExtractor`.
This change also removes a `TODO` that is misplaced, since there's no
image bytes being emitted here (and never was).
PiperOrigin-RevId: 604688053
(cherry picked from commit 7ae3d69e00)
These are often the same for image tracks, since we usually drop the
whole image file (both the container and actual encoded image bytes)
into a single sample, but there are cases where we emit a track with
`containerMimeType=image/jpeg` but **no** samples (from
`JpegMotionPhotoExtractor`, to carry some metadata about the image +
video byte offsets).
It's therefore more correct to implement the `supportsFormat` check
based on `sampleMimeType`, so that these 'empty' image tracks are not
considered 'supported' by `ImageRenderer`.
#minor-release
PiperOrigin-RevId: 604672331
(cherry picked from commit eabba49610)
