This happens when using `ExoPlayer.setVideoEffects()`.
This CL also fixes the first frame not rendered problem, originally solved in
7e65cce967, but rolled back in 5056dfaa2b because the solution introduces
the flash that is observed in b/292111083.
Before media3 1.1 release, the output size of `VideoFrameProcessor` is not
reported to the app. This was changed later after introducing
`CompositingVideoSinkProvider`, where the video size after processing **is**
reported to the app. After this CL, the size is again, not reported.
PiperOrigin-RevId: 602345087
(cherry picked from commit dcae49a561)
The updated algorithm has two main improvements:
- The silence padding is not constant but a ratio of the original
silence (up to a defined max) to more naturally represent the
original gaps.
- The silence is not instantly going to zero, but uses a ramp down
and up for a smooth volume transition and also retains a small
percentage of the original noise for more natural "silences" that
still contain some background noise.
#minor-release
Issue: google/ExoPlayer#7423
PiperOrigin-RevId: 602322442
(cherry picked from commit bb533332f4)
The return value of onConfigure must not be ignored as it specifies
the output format of the processor, which may be different from the
input format.
#minor-release
PiperOrigin-RevId: 601799440
(cherry picked from commit 2fc5590e7a)
Many usages are needed to support other deprecations and some
can be replaced by the recommended direct alternative.
Also replace links to deprecated/redirected dev site
PiperOrigin-RevId: 601795998
(cherry picked from commit ed5b7004b4)
It's likely that we will merge these back into their `XXXDecoder`
implementations, but this smaller change allows us to avoid including
these public symbols in the upcoming release.
#minor-release
PiperOrigin-RevId: 601432629
(cherry picked from commit 12157a6b1a)
This method works by reflectively loading classes from the `lib-effect`
module, in order to avoid a hard dependency on this module for ExoPlayer
users that don't want video effect functionality. This change ensures
that a failure to load the necessary classes fails immediately, instead
of on a later thread inside `MediaCodecVideoRenderer` when the
reflection currently happens.
Also update the javadoc to make the dependency requirement clear.
#minor-release
PiperOrigin-RevId: 601387957
(cherry picked from commit a6812156e6)
DASH: `DashMediaSource.Factory` would only propagate it to `DashChunkSource.Factory` -> `BundledChunkExtractor.Factory`
SS: `SSMediaSource.Factory` -> `SsChunkSource.Factory`
HLS: `HlsMediaSource.Factory` -> `HlsExtractorFactory`
Remove nullability of SubtitleParser.Factory across the stack
#minor-release
PiperOrigin-RevId: 601250013
(cherry picked from commit f103a2dcf5)
The `SubtitleParser.Factory` is no longer @Nullable and the experimenting toggle is used to enable/disable the use of this factory for subtitle parsing during extraction.
The three places that will hold the "truth" for the `SubtitleParser.Factory` are: BundledChunkExtractor.Factory, SsChunkSource.Factory, DefaultHlsExtractorFactory
DASH: `DashMediaSource.Factory` would only propagate it to `DashChunkSource.Factory` -> `BundledChunkExtractor.Factory`
SS: `SSMediaSource.Factory` -> `SsChunkSource.Factory`
HLS: `HlsMediaSource.Factory` -> `HlsExtractorFactory`
#minor-release
PiperOrigin-RevId: 601151615
(cherry picked from commit 4d7b23f0d1)
As per MP4 spec ISO 14496-12: 8.7.5 Chunk Offset Box, Both "stco" and
"co64" can be used to store chunk offsets. While "stco" supports 32-bit
offsets, "co64" supports 64-bit offsets.
In non fragmented MP4, the mdat box can be extremely large, hence muxer
uses "co64" box.
But for fragmented MP4, muxer does not write any data in this chunk offset
box (present in "moov" box) because all sample related info is present in
"moof" box.
Technically, "co64" box should also work in fragmented MP4because
its empty only but QuickTime player fails to play video if "co64"
box is present in fragmented MP4 output file.
Testing: Verified that QuickTime player does not play video when "co64"
box is present but is able to play when "stco" box is present.
#minor-release
PiperOrigin-RevId: 601147046
(cherry picked from commit 0acf6902e5)
Those classes only needed to have access to a `SubtitleParser.Factory` to get a potentially updated `Format` for TrackGroups. The `SubtitleParser.Factory` was only used to check the support for the `mimeType` and getting some cue-related behaviour.
This introduced complexity in a way that both Periods and Extractors needed to have the same `SubtitleParser.Factory` in their individual stacks. To ensure that the sample queue would get the same transcoded/original format.
Instead, now we expose `getOutputTextFormat` methods on `ChunkExtractor.Factory`, `SsChunkSource.Factory` and `HlsExtractorFactory`. Those are the dependencies that Hls/Ss/DashMediaPeriod can make use of to delegate the format-updating logic to.
#minor-release
PiperOrigin-RevId: 601130714
(cherry picked from commit 966b710897)
This fix makes output playable on VLC player.
The output does not play on QuickTime player which is being fixed in
a separate CL.
#minor-release
PiperOrigin-RevId: 601118813
(cherry picked from commit 806f90922b)
Allow setAdditionalRotationDegrees to be called with same rotation after tracks added. This is needed for processes that mux files partially trim optimization so they don't error out after hitting the check state
Manually tested to ensure trim optimization succeeds, automated test added here as well
PiperOrigin-RevId: 601081778
(cherry picked from commit b94c7d08c1)
These symbols in `lib-effect` are referenced via reflection from
`CompositingVideoSinkProvider` in `lib-exoplayer` in order to avoid
a hard dependency from `lib-exoplayer` to `lib-effect`. Without this
keep rule, the symbols can get renamed by R8 resulting in the
invocations failing.
#minor-release
PiperOrigin-RevId: 601074636
(cherry picked from commit e5621cc709)
Populate both `artworkUri` and `artworkData` in
`MediaMetadata.Builder.populate(MediaMetadata)` when at least one of them is non-null.
Issue: androidx/media#964
PiperOrigin-RevId: 600826103
(cherry picked from commit 35ac46b92e)
Earlier implementation processed each track (pending sample's buffer info)
individually when writing their corresponding "traf" box in a fragment.
The change involves processing all tracks before start writing "traf" boxes.
#minor-release
PiperOrigin-RevId: 600811093
(cherry picked from commit 4c1581a175)
This method is needed for some system apps to override the
output switcher when MediaRouter2 can't be used.
PiperOrigin-RevId: 600807119
(cherry picked from commit b64d754670)
The default notification provider was still using the legacy
compat MediaStyle instead of our own Media3 one. They are fully
equivalent in their implementation and API and can be swapped out
easily.
PiperOrigin-RevId: 600797920
(cherry picked from commit 9448f939f4)
We keep the previous parsing-during-rendering tests, even though they
can be a bit flaky, because this is an important regression test. The
regression risk is lower for this instrumentation test compared to
robolectric tests with different `ShadowLooper` behaviour.
#minor-release
PiperOrigin-RevId: 600781035
(cherry picked from commit a53f3451dd)
Due to poor isolation between the session tests, in particular the
static state in `MediaSession.SESSION_ID_TO_SESSION_MAP`, an unreleased
session at the end of one test can cause subsequent tests to fail with
obscure errors like `Session ID must be unique`.
#minor-release
PiperOrigin-RevId: 600737697
(cherry picked from commit ca61ac6ca3)
We can just continue to assume that we don't know the current device.
This case happens on the latest Robolectric release where this method
call isn't implemented yet. As we not generally assume that the
method can throw, this workaround can be removed once Robolectric
is updated again.
#minor-release
PiperOrigin-RevId: 600426851
(cherry picked from commit 81615dd5b5)
Add protected method in SimpleBasePlayer for thread verification to help
subclasses verify thread access for additional methods they define and
still report the same message to the user.
Also, remove the DAC link pointing to the ExoPlayer-specific
documentation from the exception message. Users who extend
SimpleBasePlayer have access to the class' javadoc.
PiperOrigin-RevId: 600426692
(cherry picked from commit 9e9c3cbe5e)
[Android best
practices](https://developer.android.com/media/optimize/sharing#android_8_81_and_9)
recommend disabling B-frames on API 27, but some devices output B-frames anyway
when H.264/AVC High profile is selected. Add a workaround to force these
devices not to use high profile, to prevent B-frames being output.
`MediaMuxer` likely handles B-frames on these specific devices, but this change
allows the migration to default to in-app muxing to take place without
introducing errors, and it's a temporary workaround until B-frames are properly
supported in the in-app muxer.
PiperOrigin-RevId: 600422238
(cherry picked from commit 6029521898)
Some player method calls sent from MediaControllers accept int
or float values with a very clear API contract that disallows
some values. Filtering by these values early avoids calling a
Player implementation with invalid values.
PiperOrigin-RevId: 600413993
(cherry picked from commit c64b271f07)
This optimization always reports buffers as 'skipped' (i.e. deliberately
not shown), which makes sense for the target case of high FPS content on
a lower refresh rate screen, when lots of the frames will **never** be
shown.
However the optimization also results in reporting buffers as 'skipped'
when decoding is a bit slow, resulting in a frame being released one
vsync late, which then means we have two frames to release in the same
vsync (when the previous vsync was empty). In this case, it would be
more correct to report this as a 'dropped' frame (since it was due to
slow decoding).
Until we can change the logic to distinguish these cases and report them
separately, this CL disables the optimization completely in GTS tests.
This is needed because we often assert there were zero skipped frames,
so slight decoding slowness can cause spurious/flaky test failures (our
threshold for dropped frames is non-zero).
#minor-release
PiperOrigin-RevId: 600406443
(cherry picked from commit 999e154b2a)
This device doesn't seem to be capable of simultaneous encode/decode at this
resolution. We don't have a good way to check the capability (we are already
checking separate decode/encode capability) so just skip this test to save time
triaging its failures.
PiperOrigin-RevId: 600399564
(cherry picked from commit e82393ed41)
From API 23, we may have a preferred device that is most likely used
as the output device.
From API 24, the AudioTrack tells us the actual routed device that is
used for output and we can listen to changes happening mid-playback.
From API 33, we can directly query the default device that will
be used for audio output for the current attributes.
If the routed device is known by any of the methods above, we can add
more targeted checks in methods like isBluetoothConnected to avoid
iterating over all devices that are not relevant.
The knowledge about the routed device will also be useful to check
advanced output capabilities in the future (e.g. for lossless
playback)
PiperOrigin-RevId: 600384923
(cherry picked from commit b1c954fa84)
This allows us to inject a videoFrameProcessorFactory into
MediaCodecVideoRenderer, without issues about creating the
VideoFrameReleaseControl in the MediaCodecVideoRenderer.
Unfortunately, this does result in more complex CVSP state, where
VideoFrameReleaseControl is no longer final, may be null, and may potentially
change. However, this tries to be careful with assertions to guarantee good
state, and is cleaner than modifying the long-standing MediaCodecVideoRenderer
interface.
Tested that this works on the ExoPlayer demo with setVideoEffects applied, and
using a playlist with SDR->HDR and HDR->SDR items.
PiperOrigin-RevId: 599823412
(cherry picked from commit cb0f5a7fff)
Although not public, documenting what happens in each state allows for
better code understanding at a glance.
As part of this, refactored the #getProgress method to highlight that
the other options are "non standard".
PiperOrigin-RevId: 599505369
This also fixes issue introduced by frames being released from a prior version of a
GlShaderProgram
Tested by seeking within a playlist with one SDR then one HDR video.
PiperOrigin-RevId: 599475959
Previously, 8f69bb0d9d updated external input (video input)
but not internal input (image/texture input). Update internal input as
well to match.
PiperOrigin-RevId: 599235813
Since mdat box can be huge so there is a provision to use 64 bit size field.
In case of fragmented MP4, individual fragments should not have large mdat box
so a 32 bit size field should be sufficient.
PiperOrigin-RevId: 599219041
When we default to 'parse during extraction', we will flip the default
of this, to ensure that apps know they are using an
incompatible/deprecated flow for subtitle handling.
PiperOrigin-RevId: 599109304
Imported from GitHub PR https://github.com/androidx/media/pull/275
Added below mentioned features.
- Support for extracting DTS LBR(DTS Express) and DTS UHD Profile 2(DTS:X) descriptor ID from PSI PMT
- The DTSReader class is updated for extracting a DTS LBR.
- Newly added DtsUhdReader class for extracting DTS UHD frame.
- The DTSUtil class is updated to parse the DTS LBR or DTS UHD frame and report the format information.
Feature request for ExoPlayer: https://github.com/google/ExoPlayer/issues/11075
Merge 21efa0810db31550d6b215639f9ca2af6a32139a into 104cfc322c
COPYBARA_INTEGRATE_REVIEW=https://github.com/androidx/media/pull/275 from rahulnmohan:dts-mpeg2ts-update 21efa0810db31550d6b215639f9ca2af6a32139a
PiperOrigin-RevId: 598854998
`Surface`s don't expose their size via Java APIs. Recommend apps pass a
`SurfaceView` (which is preferable to `TextureView` as it's more efficient)
or `SurfaceHolder` so they benefit from the player automatically passing the
size down to the video renderer via `MSG_SET_VIDEO_OUTPUT_RESOLUTION`.
PiperOrigin-RevId: 598804258
MatroskaExtractor will no longer be wrapped in SubtitleTranscodingExtractor, but instead use SubtitleTranscodingExtractorOutput under the hood.
FLAG_EMIT_RAW_SUBTITLE_DATA flag will be used to toggle between subtitle parsing during extraction (before the sample queue) or during decoding (after the sample queue).
The new extractor dump files generated by `MatroskaExtractorTest` now follow the new parsing logic and hence have mimeType as `x-media3-cues`.
PiperOrigin-RevId: 598616231
AviExtractor supports text tracks (`AviExtractor.FOURCC_txts` -> `C.TRACK_TYPE_TEXT`) with subtitles.
AviExtractor will no longer be wrapped in SubtitleTranscodingExtractor, but instead use SubtitleTranscodingExtractorOutput under the hood.
FLAG_EMIT_RAW_SUBTITLE_DATA flag will be used to toggle between subtitle parsing during extraction (before the sample queue) or during decoding (after the sample queue).
PiperOrigin-RevId: 598594981
Moves setting bitmapFactory options from BitmapLoader to DatasourceBitmapLoader
BitmapLoader is a general interface for bitmap loading that could use loading implementations other that BitmapFactory, with the rise of Glide being a loader of choice. It's best to correct this interface so that it remains generic
We can't deprecate easily because the other loadBitmap method in that case has a default implementation that relies on the first one, so the change is still breaking. BitmapLoader is public api in common, but it's @UnstableAPI and hasn't been around for very long (be38670391 added it), so it seems this is the best way forward.
PiperOrigin-RevId: 597897098
Subclasses of this component can customize it by wrapping with the
decorator pattern, and a custom `CompositeSequencableLoaderFactory`
allows access to the list of delegate `SequenceableLoader` instances.
The `final` keyword was removed as part of <unknown commit> but this
component never ended up being subclassed within the library.
Making this class `final` makes upcoming changes easier to reason
about.
PiperOrigin-RevId: 597853429
The seek table in a Xing/Info header is very imprecise (max resolution
of 255 to describe each of 100 byte positions in the file). Seeking
using a constant bitrate assumption is more accurate, especially for
longer files (which exacerbates the imprecision of the Info header).
VBR files should contain an Xing header, while an Info header is
identical but indicates the file is CBR.
Issue: androidx/media#878
PiperOrigin-RevId: 597827891
7e65cce967 introduced a regression on ExoPlayer.setVideoEffects()
where there is flash on the screen after the first few frames are shown.
Before 7e65cce967, the first frames of the content are missed, until
MediaCodecVideoRenderer sends the onVideoSizeChanged() callback. The
first frame is processed but not shown, the onVideoSizeChanged() is
triggered and the renderer receives a video output resolution message as
a response from the UI.
7e65cce967 fixed the missed first frames by setting a surface on the
CompositingVideoSinkProvider before the provider is initialized, and as
as result:
- the first frames are rendered
- the MediaCodecVideoRenderer sends the the onVideoSizeChanged() after
frames are shown
- the UI sends a video output resolution change
- the MediaCodecVideoRenderer updates the CompositingVideoSinkProvider
which causes the flash.
The underlying problem is with onVideoSizeChanged() not being
triggered early enough, before the first frame is shown.
Because the flashing is a regression, this commit is reverting
7e65cce967 but keeps the test that was added as ignored, so that the
test is re-enabled as soon as we address the underlying issue.
PiperOrigin-RevId: 597814013
WebvttExtractor will no longer be wrapped in SubtitleTranscodingExtractor, but instead use SubtitleTranscodingExtractorOutput under the hood.
A new constructor will take a boolean parameter to toggle between subtitle parsing during extraction (before the sample queue) or during decoding (after the sample queue).
PiperOrigin-RevId: 597604942
Partially addresses the following TODO, by simplifying the DefaultShaderProgram
API surface.
```
// TODO(b/274109008): Refactor DefaultShaderProgram to create a class just for sampling.
```
PiperOrigin-RevId: 597575575
Originally a `PlayerId` has to be passed and it should be the same id of the player who is going to play the sources, but it turns out to be unnecessary.
When preloading, we can set a `PlayerId.UNSET` inside of the `PreloadMediaSource`, as there is no ongoing playback. And when the source is handed over to player, player will set the player's `PlayerId`.
PiperOrigin-RevId: 597475119
This involves promoting `setTextTranscodingEnabled` to
`ExtractorsFactory`, and also making it experimental, to indicate it's a
short-lived method.
PiperOrigin-RevId: 597235252
Mp4Extractor will no longer be wrapped in SubtitleTranscodingExtractor, but instead use SubtitleTranscodingExtractorOutput under the hood.
FLAG_EMIT_RAW_SUBTITLE_DATA flag will be used to toggle between subtitle parsing during extraction (before the sample queue) or during decoding (after the sample queue).
PiperOrigin-RevId: 597221831
The capabilities change depending on the attributes, so we should
pass down the actual attributes used during playback and update
the capabilities whenever these change.
PiperOrigin-RevId: 597197507
This means in a later change we can still use some of the info for CBR
files, even if we want to ignore the imprecise table of contents and
seek based on a constant bitrate assumption instead.
PiperOrigin-RevId: 597193997
