- Video release should check for buffer timestamp (which is renderer-offsetted), rather than the frame timestamp
- ImageRenderer should report ended after all of it's outputs are released, rather than when finished consuming its input.
Add tests for timestamp handling
PiperOrigin-RevId: 642587290
It's currently not possible to remove a previously set image output
on ExoPlayer, although the underlying renderer already supports
receiving null to clear the output. Marking the parameter as
nullable allows apps to clear it as well.
PiperOrigin-RevId: 642569081
In order to do that, make the VideoSink nullable in MCVR.
We want to avoid calling VideoFrameReleaseControl.setClock directly
from MCVR when the sink is enabled. The goal is to handle all the
communication with the release control from the sink/sink provider.
PiperOrigin-RevId: 642542063
These are no longer needed now that the `Bundleable` interface has been
removed. Public methods are deprecated, package-private ones are
removed. Callers are migrated in both cases (except where tests
explicitly exist for the deprecated method).
PiperOrigin-RevId: 642294451
This interface is not used in the library. Callers can use the
`Bundle toBundle()` and `static Foo fromBundle(Bundle)` methods
defined directly on each type instead.
PiperOrigin-RevId: 642271609
The previous wording suggested that `setVideoEffects()` may **only** be
called before `prepare()`, i.e. the effect cannot be changed during
playback. The intent is instead that `setVideoEffects()` must be called
once before playback in order to configure the effects pipeline, but
the effect can then be changed during playback by further calls to
`setVideoEffects()`.
Issue: androidx/media#1393
PiperOrigin-RevId: 641853629
Before, the listener was set in onReadyToInitializeCodec, which means
that it was reset every time a new codec was used.
We need to set the listener every time MCVR is enabled (not only the
first time), because it might have been set by another renderer.
PiperOrigin-RevId: 641825717
Before this change, the timestamps output from composition playback is offset
with the renderer offset. After this change, the offset is removed and the
timestamp behaviour converges with Transformer, that is, the timestamps of
video/images frames will follow that of the composition. For example, with a
composition of two 10-s items, clipping the first with 2s at the start, the
timestamp of the first frame in the second item, will be 8s.
PiperOrigin-RevId: 641121358
When the frame release control invalidates a buffer and returns that
the buffer must be ignored, we need to exit early before performing
additional checks that may result in method calls using the invalid
buffer.
PiperOrigin-RevId: 640555688
Usages removed in this CL are:
- onProcessedStreamChange, which was already called from the VideoSink
(via VideoFrameRenderControl)
- setOutputSurface, which was also already called from the VideoSink
- setFrameRate, which this CL now sets in the VideoSink
PiperOrigin-RevId: 640530903
Before this CL, we were checking whether the video sink was initialized
to determine whether it should be used. In the meantime,
shouldUseVideoSink has been introduced. Use this boolean to check
whether to use the video sink as it's a clearer signal.
PiperOrigin-RevId: 640499147
This avoids having to add AnalyticsListener and catching the `onPlayerReleased` callback.
The `Exoplayer.release()` method is blocking and one can be sure that the player is released if the call returned. However, the method is useful for UI testing and asserting that the player is released after a certain UI action, e.g. closing the activity or detaching a window.
PiperOrigin-RevId: 640114416
The CMCD data was incorrectly added to the `dataSpec` of the media segment instead of the init segment.
Also relaxed the condition for playbackRate to be C.RATE_UNSET when creating an instance of CmcdData.Factory as there was nothing enforcing this check.
#minor-release
PiperOrigin-RevId: 639046080
When running in asynchronous mode, MediaCodec will be running the CPU to signal input and output buffers being made available for use by the player. With ExoPlayer.experimentalSetDynamicSchedulingEnabled set to true, ExoPlayer will wakeup to make rendering progress when MediaCodec raises these signals. In this way, ExoPlayer work will align more closely with CPU wake-cycles.
PiperOrigin-RevId: 638962108
Currently ExoPlayer schedules its main work loop on a 10 ms interval. When renderers cannot make any more progress (ex: hardware buffers are fully written with audio data), ExoPlayer should be able to schedule the next work task further than 10ms out into the future.
Through `experimentalSetDynamicSchedulingEnabled` and these changes to `MediaCodecAudioRenderer`, ExoPlayer can use the data provided by the audio renderer to dynamically schedule its work tasks based on when it is expected that progress can be made.
PiperOrigin-RevId: 638677454
Currently ExoPlayer schedules its main work loop on a 10 ms interval. When renderers cannot make any more progress(ex: hardware buffers are fully written with audio data), ExoPlayer should be able to schedule the next work task further than 10Ms out.
Through `experimentalSetDynamicSchedulingEnabled`, ExoPlayer will dynamically schedule its work tasks based on when renderers are expected to be able to make progress.
PiperOrigin-RevId: 638676318
If subtitle-parsing-during-extraction is enabled (now defaults to on),
the 'outer' extractor class name is often
`SubtitleTranscodingExtractor`, leading to some slightly useless error
messages like:
`None of the available extractors (FragmentedMp4Extractor, Mp4Extractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, TsExtractor, MatroskaExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, AviExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor)`
PiperOrigin-RevId: 636834354
If MediaCodec allocates passes an image buffer with a cropped region,
SurfaceTexture.getTransformMatrix will cut off 2 pixels from each dimensions.
The resulting videos will appear a little stretched.
This patch inspects the SurfaceTexture transform matrix, and guesses what the
unscaled transform matrix should be.
Behind experimentalAdjustSurfaceTextureTransformationMatrix flag
PiperOrigin-RevId: 635721267
This case is most likely to happen when re-preparing a multi-period
live stream after an error. The live timeline can easily move on to
new periods in the meantime, creating this type of update.
The behavior before this change has two bugs:
- The player resolves the new start position to a subsequent period
that existed in the old timeline, or ends playback if that cannot
be found. The more useful behavior is to restart playback in the
same live item if it still exists.
- MaskingMediaSource creates a pending MaskingMediaPeriod using the
old timeline and then attempts to create the real period from the
updated source. This fails because MediaSource.createPeriod is
called with a periodUid that does no longer exist at this point.
We already have logic to not override the start position and need
to extend this to also not prepare the real source.
Issue: androidx/media#1329
PiperOrigin-RevId: 634833030
The two affected tests where playing until a specific
position to enable the player to read ahead. The method
pauses at exactly the target position, but then has
temporarily undetermined behavior because the playback
thread uses player.getClock().onThreadBlocked() that lets
the playback thread make progress in parallel to the test
thread. The tests were flaky because they sometimes made
so much progress that they ended playback before we could
query the updated renderer state.
This can be fixed by using
run(player).untilBackgroundThreadCondition instead, which
is guaranteed to be fully deterministic, but may not be able
to stop at exactly the desired position (which we don't
really need anyway for this test).
PiperOrigin-RevId: 634699752
The method is only allowed to be called on prepared items.
This check was currently missing and also causing the
corresponding test to be flaky in ExoPlayerTest.
PiperOrigin-RevId: 634694077
Before this change, if a playback error is thrown the test fails with a
timeout and no additional info:
```
java.util.concurrent.TimeoutException
at androidx.media3.exoplayer.e2etest.WebvttPlaybackTest.stallPlayerUntilCondition(WebvttPlaybackTest.java:361)
```
After this change, the test failure includes a much more useful stack
trace, e.g. from 0352db9a37:
```
Caused by: java.lang.IllegalStateException: Legacy decoding is disabled, can't handle text/vtt samples (expected application/x-media3-cues).
at androidx.media3.common.util.Assertions.checkState(Assertions.java:100)
at androidx.media3.exoplayer.text.TextRenderer.assertLegacyDecodingEnabledIfRequired(TextRenderer.java:587)
at androidx.media3.exoplayer.text.TextRenderer.onStreamChanged(TextRenderer.java:210)
```
PiperOrigin-RevId: 634672138
To override this change, and go back to parsing during rendering,
apps must make two method calls:
1. `MediaSource.Factory.experimentalParseSubtitlesDuringExtraction(false)`
2. `TextRenderer.experimentalSetLegacyDecodingEnabled(true)`
PiperOrigin-RevId: 634262798
The test currently resets the time too far in the past and then has
to run through ~30000 additional iterations of doSomeWork to reach
the end, sometimes triggering the test timeout.
Fix it by resetting the time to the intended start position when
transitioning items.
PiperOrigin-RevId: 633918706
This annotation is only needed on public classes.
This change also removes the `/* package */` comment from some `public`
classes.
PiperOrigin-RevId: 633864544
This means the content source is 'prepared' instantly with a
placeholder, enabling all further preparation steps (e.g. loading
preroll ads) while the actual content is still preparing. This
improvement can speed up the start time for prerolls in manifest-based
content that doesn't have a zero-time preparation step like progressive
media.
Issue: androidx/media#1358
PiperOrigin-RevId: 633640746
This allows apps to better detect when the platform
reclaims a codec. This requires adding the error code
to MediaCodecDecoderException.
PiperOrigin-RevId: 633588914
The class currently tracks the input format itself, updating it too
early in onConfigure() instead of onFlush(). This causes issues when
the format changes and the new values are applied to the silence
skipping logic of the old format. The fix is to use the base class
input format handling instead.
Issue: androidx/media#1352
PiperOrigin-RevId: 633232368
Due to loading a MediaSourceFactory via reflection:
Before this change
* the content type was logged as an integer, rather than a human-readable string
* `ClassNotFoundException` was swallowed silently by `maybeLoadSupplier` without telling the user what module they were missing
After:
* ClassNotFoundException is swallowed silently ONLY when determining supported types
* ClassNotFoundException is bubbled up when we are trying to play media without the corresponding module properly loaded
PiperOrigin-RevId: 632568989
The same doSomeWork iteration that triggers the silence skipping
discontinuity may already have another discontinuities (like
AUTO_TRANSITION), which should take precedence over the silence
skipping.
PiperOrigin-RevId: 632432851
When the period has loaded to the end of the source, the `period.getBufferedPositionUs` will be set to `C.TIME_END_OF_SOURCE`, which is a negative value. Thus, the original `continueLoadingPredicate` will never turn to `false`, as the `bufferedPositionUs` is definitely less than the target preload position that is expected to be positive.
In this change, we added `PreloadMediaSource.PreloadControl.onLoadedToTheEndOfSource(PreloadMediaSource)` to indicate that the source has loaded to the end. This allows the `DefaultPreloadManager` and the custom `PreloadMediaSource.PreloadControl` implementations to preload the next source or take other actions.
This bug was not revealed by the the `DefaultPreloadManagerTest` because the related tests were all using the `FakeMediaSource` and only setting the preload target to `STAGE_TIMELINE_REFRESHED`. Thus, the tests for testing the `invalidate()` behaviors were modified to use the real progressive media whenever possible, unless we have to use `FakeMediaSource` to squeeze a chance to do more operations between the preloading of sources to test some special scenarios.
PiperOrigin-RevId: 631776442
For offloaded playback, reset the tracking field for stream completion in `DefaultAudioSink` prior to calling `AudioTrack.stop()` so that `AudioTrack.StreamEventCallback#onPresentationEnded` correctly identifies when all pending data has been played.
#minor-release
PiperOrigin-RevId: 631744805
When the PlaybackParameters are set to their DEFAULT value, we
currently bypass the audio processor chain when determining the
output media position, under the assumption that no timestamp
change happens in the audio processors. This assumption may not
be true as the audio processors can change playout durations on
their own accord independent of the provided PlaybackParameters.
To correctly reflect any updated playout duration, we can just
always check the audio processor chain. The default implementation
will continue to assume that only the SonicAudioProcessor changes
the playout duration.
PiperOrigin-RevId: 631726112
Without it, the DAC doesn't render the full sentence. And the link is not actually linking to the proper constructors.
#minor-release
PiperOrigin-RevId: 630395271
Set `VideoSink`'s offset during seeking in `MCVR.onPositionReset()`
This one is necessary in some cases, where `onProcessedStreamChange()` is not
invoked during a seek. For example, when seeking when playback has ended.
PiperOrigin-RevId: 630056723
To find the column of an index in a matrix the formula "column = index % width" should be used, not "column = index % height"
If inputFormat.tileCountVertical was equal to 1 then it would not throw an error, but instead result in the first tile of the bitmap always being returned. If inputFormat.tileCountVertical was larger than 1 then Bitmap.createBitmap() would throw an error as it would attempt to go outside the bounds of outputBitmap
ImageRenderTest has been updated to test for 2x3 images so that tileCountVertical != tileCountHorizontal. These tests passed previously because they were equal, so using tileCountVertical produced the same results as tileCountHorizontal
The last rebuffer time was being updated erroneously, even in the absence of rebuffering events, resulting in incorrect `bs` (buffer starvation) key in CMCD.
Issue: androidx/media#1124
PiperOrigin-RevId: 629731796
These subtitles were skipped because they are marked as shouldBeSkipped
based on their timestamps. The fix removes this flag entirely in
SimpleSubtitleDecoder because TextRenderer handles potential skipping
if needed.
PiperOrigin-RevId: 629717970
`updateRebufferingState` is invoked immediately preceding this `if-else`, with no alteration of state occurring in between, making this invocation unnecessary.
PiperOrigin-RevId: 629694531
This lets apps update the task manager priority and send the
priority message to all renderers so that they can adjust their
resources if needed.
PiperOrigin-RevId: 629426058
This change adds a 'free-form' text genre to the existing
`bear-id3.mp3` sample, and adds a new sample with a 'numeric' genre ([9
is Metal](https://mutagen-specs.readthedocs.io/en/latest/id3/id3v2.4.0-frames.html#appendix-a-genre-list-from-id3v1)).
The samples were modified with:
```shell
$ id3edit --set-genre "Gorpcore" bear-id3.mp3
$ id3edit --set-genre "9" bear-id3-numeric-genre.mp3
```
Reading the numeric genre with `exiftool` shows the mapping back to
'Metal':
```
$ exiftool bear-id3-numeric-genre.mp3 | grep Genre
Genre : Metal
```
The playback dumps don't contain the genre because it's not yet
propagated to `MediaMetadata.genre`. That is done in a follow-up
change.
Issue: androidx/media#1305
PiperOrigin-RevId: 629043506
This removes a window of inconsistency between the timeline
known to the player and the most recent timeline in the
`MediaSourceList` by removing the `MSG_DO_SOME_WORK` when
sending `MSG_PLAYLIST_UPDATE_REQUESTED`. `MSG_DO_SOME_WORK`
is then sent again when the playlist update is requested.
PiperOrigin-RevId: 629021752
Some test cases are still using `ConcatenatingMediaSource`
even if they do not test specific features of the concatenating
source. Apparently these test have a slightly different timing
behavior when it comes to updating the `MediaPeriodQueue` and
emitting change events with analytics.
Using the playlist API ensures testing the future-proof code path.
PiperOrigin-RevId: 628413460
The first has a string genre, and various other values set, generated
from `sample.mp4` with the command below [1].
The second has a numeric genre, to test `gnre` atom parsing. This
parsing is currently broken, the fix is in a follow-up change. This
file was also generated from `sample.mp4` with the command below [2].
This change also includes `CommentFrame.text` in its `toString`
representation, otherwise there's no difference between e.g. different
levels of `ITUNESADVISORY` in the extractor dump files.
Issue: androidx/media#1305
-----
[1]
```shell
$ AP_PADDING="DEFAULT_PAD=0" \
AtomicParsley sample.mp4 \
--artist "Test Artist" \
--album "Test Album" \
--tracknum 2/12 \
--disk 2/3 \
--year 2024 \
--genre "Gorpcore" \
--bpm 120 \
--compilation true \
--advisory clean \
--gapless true \
--sortOrder artist "Sorting Artist" \
--sortOrder album "Sorting Album" \
--preventOptimizing \
-o sample_with_metadata.mp4
```
[2]
```shell
$ AP_PADDING="DEFAULT_PAD=0" \
AtomicParsley sample.mp4 \
--genre "Metal" \
--preventOptimizing \
-o sample_with_numeric_genre.mp4
```
PiperOrigin-RevId: 628345458
Before this CL, the video sink was not reconfigured for the second video
in a sequence with video-image-video. For example, the stream offset
and listener were not set for the second video.
PiperOrigin-RevId: 628065991
Instead of initializing the video sink outside the renderer with an
empty format for composition preview, we initialize it in the renderer
with the input format for video.
PiperOrigin-RevId: 627313708
