Instead of initializing the video sink outside the renderer with an
empty format for composition preview, we initialize it in the renderer
with the input format for video.
PiperOrigin-RevId: 627313708
the output format conatins key information about the output of the assetloader being hdr, so we must signal the output format, not the input format to the sample exporter
fixes mh ultraHdr test failures.
Also discovered images created are very device specfic so got rid of the pixel tests, we have pixel tests in the effects library that cover the same case.
PiperOrigin-RevId: 619899249
This property is transformer specific and does not belong to
muxer interface.
This is to eventually replace muxer interface in Transformer module with
muxer interface in Muxer module.
PiperOrigin-RevId: 618895836
This is the most widely-used test-skipping method I'm aware of, so I figured this
would be a great method to scale usage of AssumptionViolatedException.
PiperOrigin-RevId: 618160931
This also makes it more consistent with newer testId tests that don't have nullness, so tests don't look inconsistent, and was pretty easy to do :P
PiperOrigin-RevId: 616856888
This was broken by 2fa38d15dd, which added an assumes
method, but missed the `!` operator for the tests where HDR is
unsupported. Add an assumes method that assumes a lack of support
for HDR.
Tested on the failing device (Pixel 7) and confirmed this fixes
the test on that device, to throw AssumptionViolatedException
instead of allowing test logic to run after failing the
assumption.
PiperOrigin-RevId: 616846588
Plumbing hdrMode through the default asset loader factory via the constructor is problematic because it breaks API boundaries. It means there is another way to set hdrMode outside of Composition.java and TransformationRequest.java, which is error prone and cause problems if someone an app starts customizing the assetloaderfactory. It also means custom asset loaders can't receive this information without hacking around.
The introduction of the composition-level settings class makes this approach easily extensible for other settings applied on the composition level but use in an individual asset level basis (e.g. ultraHDR support).
PiperOrigin-RevId: 611466920
Add abilitiy to use real surfaces in instrumentation tests
using the ActivityScenarioRule and an activity class for testing
purposes.
PiperOrigin-RevId: 611421490
This new test is for `ExoPlayer.setVideoEffects()`. It plays the
one-second-long video, applies an overlay that prints the video frame timestamp
onto the frame, captures the output frame and compares the captured output
frame with golden.
PiperOrigin-RevId: 610781590
MediaCodec docs already allude to potentially mismatching H.264 level
between container and bitstream. Relax the initialization data check to
reflect this.
PiperOrigin-RevId: 608942322
Our previous test video was difficult to use for testing our tone-mapping
algorithm, because it didn't have many different colors. Use a better
video for tone-map tests, by having one with more different colors
PiperOrigin-RevId: 606274843
TestUtil class is more appropriate for the given method.
In the next CL, the only method in FileUtil.java will be moved back
into transformer library and the FileUtil class will be removed.
PiperOrigin-RevId: 605648034
Before supporting transmuxing when both no op effects and regular rotations are set, move setting the muxerWrapper rotation out of shouldTranscodeVideo() to ensure the muxerWrapper rotation is only set at the appropriate times.
This cl also ensures the state between the muxerWrapper and the list of video effects is consistent by clearing the list of videoEffects in trim optimization. If trim optimisation is being applied, then EditedMediItem.effects.videoEffects only contains no-op effects or regular rotations that get be applied in the muxer wrapper. Therefore, we should clear the list of video effects to ensure that no effect gets applied twice.
PiperOrigin-RevId: 604292052
The `MediaMuxer` (FrameworkMuxer) supports AV1 mime type from API 34.
For this to work track `Format/MediaFormat` must have `CSD`
data.
Change also include providing AV1 option in demo app.
Transmuxing of an AV1 mime type input will not work because
`Extractor` does not extract AV1 CSD data.
Verified changes manually via demo app.
PiperOrigin-RevId: 603002380
FileUtil.java can be extended to add more methods for validating
output file. This will be used in Transformer's robolectric tests and
instrumentation tests hence need to move to a common module.
PiperOrigin-RevId: 602789503
Previously, input assets had to be all SDR or all HDR.
After this CL, if tone-mapping is requested, HDR and SDR may mix in any order. If tone-mapping is not requested, SDR may precede HDR, but not vice versa, until SDR to HDR tone-mapping is implemented
Some changes to accomplish this include:
1. Inputting the decoded format's color to VideoFrameProcessor.registerInputStream
for each stream.
2. Calculating the estimated decoded format's color for each stream, by estimating
it based on MediaCodec tone-mapping.
PiperOrigin-RevId: 602747837
This allows us to also plumb whether we're doing MediaCodec tone-mapping,
which will be used in a follow-up CL in the ExoAssetLoaderVideoRenderer.
PiperOrigin-RevId: 601774435
Allow setAdditionalRotationDegrees to be called with same rotation after tracks added. This is needed for processes that mux files partially trim optimization so they don't error out after hitting the check state
Manually tested to ensure trim optimization succeeds, automated test added here as well
PiperOrigin-RevId: 601081778
This device doesn't seem to be capable of simultaneous encode/decode at this
resolution. We don't have a good way to check the capability (we are already
checking separate decode/encode capability) so just skip this test to save time
triaging its failures.
PiperOrigin-RevId: 600399564
This file is CBR encoded with LAME, so it has an `Info` header (the CBR
equivalent to `Xing`).
A follow-up change will use this file in `Mp3ExtractorTest`.
Issue: androidx/media#878
PiperOrigin-RevId: 595938327
Mp4Muxer does not support out of order B-frames. Currently it
silently writes out of order B-frames, producing an invalid file (with
negative sample durations).
Although `Mp4Extractor` is somehow able to process this invalid file and
`Exoplayer` is able to play it but that is unexpected.
The `sample.mp4` test file contains B frames. Other test files does not
contain `H264 video + AAC audio` format hence created a new test file by
running `sample.mp4` via `Transformer` after applying some effects.
PiperOrigin-RevId: 594016144
Instead, for input videos, use the colorInfo provided by the extractor. Similarly, for input images, use sRGB, the only color currently in use.
Textures do still need the input ColorInfo provided though.
PiperOrigin-RevId: 592875967
Checking the output format's mime type may skip tests more often than we'd like,
because we may desire using a lower-spec output mimetype than what's passed in, if
based on the input's HDR mimetype value.
Therefore, update this output format to null, for tone-mapping tests
PiperOrigin-RevId: 592855713
Despite GL 3.0 not being required on API 29+, it is experimentally
determined to always be supported on our testing devices, on API 29+.
That said, still fall back to OpenGL 2.0 if 3.0 is not supported,
just in case.
PiperOrigin-RevId: 590569772
Added a new ABANDONED option so one can tell the difference between when the optimization has been requested but not applied vs not requested at all. also changed the ordering do better represent the hierarchy of failure modes
PiperOrigin-RevId: 588720513
This helped me debug which bitmap was actually failing. Otherwise, you need to clear all bitmaps on the device relating to this test, then adb pull all bitmaps and see the last uploaded one to see, which is much more confusing.
PiperOrigin-RevId: 588374081
The issue that motivated adding this (frames unexpectedly being dropped by the
decoder) has been addressed, so we can turn off the logging to reduce
unnecessary allocations during transformation. We can easily turn on debug
logging in future as needed by setting `DebugTraceUtil.DEBUG = true`.
Also avoid allocations for string building at logging call sites by passing a
format string for extra info. Formatting the string now only happens when
debugging is turned on.
Tested manually by running transformations in the new state (DEBUG = false) and
with debugging turned on.
PiperOrigin-RevId: 585666349
The decoder and encoder won't accept high values for frame rate, so avoid
setting the key when configuring the decoder, and set a default value for the
encoder (where the key is required).
Also skip SSIM calculation for 4k, where the device lacks concurrent decoding
support.
PiperOrigin-RevId: 585604976
Composition and EditedMediaItemSequence don't allow empty lists in their main
constructors, so shouldn't the vararg API. This is more inline with Effective
Java item 53.
PiperOrigin-RevId: 583415124
Skip wearable devices, which don't have the same CDD requirements on codecs from Android 5 (API 21).
Limit an existing skipping case to pre API 33 devices, so that we can catch failures on Android 13 (API 33) onwards, and add OnePlus 9 Pro which also times out calculating SSIM. Remove TODOs for removing test/SSIM skipping now they are restricted to API version.
PiperOrigin-RevId: 581985554
This device over-reports encoding capabilities, so skip the test.
This is a Pixel device that was upgraded to Android 12 (API 31/32) so the issue should only affect devices that didn't take OTAs.
PiperOrigin-RevId: 581981073
Changes includes:
1. Add resume flow.
2. Change demo app code to resume export.
3. Changes in test infra to trigger resume.
4. E2E Test cases
PiperOrigin-RevId: 579895744
Move remote 8K file to local and trim to 320ms.
Trim done with ffmpeg:
`ffmpeg -i {remote_file} -t 0.3 -c:v copy -c:a copy 8k24fps_300ms.mp4`
PiperOrigin-RevId: 569449962
That said, only SDR is supported for now, so this will always throw if
HDR is input. This will also throw if different ColorInfo values are input
because color SDR mixing (ex. between sRGB and BT709) is not yet supported.
PiperOrigin-RevId: 563457729
When checking the color transfer, there is no reason that the file should have
exactly two tracks, and this assertion means that this method can't be used
as-is for checking video-only files, for example.
PiperOrigin-RevId: 562813111
Overlays may be overlaid over:
* In VideoFrameProcessor, videos or images (or texture input).
* In Compositor, other videos.
In Compositor, Overlays may consist of video, so it could be confusing
for videoFrameAnchor to contrast with overlayAnchor.
Also, rename overlayAnchor to overlayFrameAnchor, since it's modifying
the anchor in the overlay's frame, so this name seems slightly more precise.
PiperOrigin-RevId: 562004292
Implement VideoCompositor support of:
* Different input and output sizes
* CompositorSettings, to customize output size based on input texture sizes
* OverlaySettings, to place an input frame in an arbitrary position on
the output frame.
Also, refactor Overlay's matrix logic to make it more reusable between
Compositor and Overlays
PiperOrigin-RevId: 561931854
The first call to method `registerInputStream` doesn't block.
Later successive calls to the method blocks until the previous register call
finishes.
PiperOrigin-RevId: 559694490
In addition to this being how Alpha should be handled, tests do fail under
API 29 without this CL. Unfortunately while these tests do fail under API 29
without this CL, we currently only run this test on API 33 emulators, so we
didn't catch this failure earlier (until compositor tests on mh failed on all
devices under API 29 and succeeded on all at or over 29).
PiperOrigin-RevId: 557781757
To ensure that for each output bitmap from the compostor, the right input
timestamps were used.
Only applied on a subset of tests to avoid needing to upload+maintain
too many files/size in the test binary, especially when it would test
duplicate behavior
PiperOrigin-RevId: 555222530
This means we now require 2+ input frames per input, and compare the primary
stream timestamp with secondary stream timestamps in order to select the
correct output timestamp. We also must release frames and back-pressure as
soon as possible to avoid blocking upstream VFPs.
Also, improve signalling of VFP onReadyToAcceptInputFrame
PiperOrigin-RevId: 553448965
This allows for custom implementations of this interface, like
a TestVideoCompositor or partner-implemented implementation
PiperOrigin-RevId: 552541631
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Move shared test logic to the test runner.
This does increase indirection, which isn't usually preferable in tests.
However, we will have many different tests that would use logic
like this, so this allows us to reduce repetition.
PiperOrigin-RevId: 551536438
For each event, the timestamp and presentation time is logged. The trace can
then be dumped to a tsv file and easily imported in a spreadsheet.
PiperOrigin-RevId: 550839156
signalEndOfInputStream is needed for when streams have different amounts of
frames, so that if the primary stream finishes after a secondary stream, it
can end without waiting indefinitely for the secondary stream's matching
timestamps.
onEnded mirrors this API on the output side, which will be necessary to
know when to call signalEndOfInput on downstream components (ex. on downstream)
VideoFrameProcessors
PiperOrigin-RevId: 549969933
This serves as a sort of test with more frames for the compositor for now
(before more varied video system tests come later when integrating with
Transformer), showing it doesn't error out and outputs the right
amount of frames.
Due to the VFPTestRunner having a 5s timeout, and mostly due to presubmit
emulators being very slow with OpenGL, there is a sort of limitation
to how many frames this type of test can have, depending on the test target
PiperOrigin-RevId: 548159762
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
This allows us to simplify and reduce thread initialization, hops and the
synchronization cost associated with them, especially when more and more VFPs
are used.
PiperOrigin-RevId: 545622169
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
In some cases the codec selected for decoding has a different MIME type than
the media. In thoses cases Transformer continued to use the media's MIME type
and that caused codec configuration failures.
Removed `EncoderUtil.findCodecForFormat()` as we stopped using the method it
uses for finding a codec. Plus, the method is only used in the test.
See also `MediaCodecUtil.getALternativeCodecMimeType()`.
PiperOrigin-RevId: 536683663
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
