Move remote 8K file to local and trim to 320ms.
Trim done with ffmpeg:
`ffmpeg -i {remote_file} -t 0.3 -c:v copy -c:a copy 8k24fps_300ms.mp4`
PiperOrigin-RevId: 569449962
That said, only SDR is supported for now, so this will always throw if
HDR is input. This will also throw if different ColorInfo values are input
because color SDR mixing (ex. between sRGB and BT709) is not yet supported.
PiperOrigin-RevId: 563457729
When checking the color transfer, there is no reason that the file should have
exactly two tracks, and this assertion means that this method can't be used
as-is for checking video-only files, for example.
PiperOrigin-RevId: 562813111
Overlays may be overlaid over:
* In VideoFrameProcessor, videos or images (or texture input).
* In Compositor, other videos.
In Compositor, Overlays may consist of video, so it could be confusing
for videoFrameAnchor to contrast with overlayAnchor.
Also, rename overlayAnchor to overlayFrameAnchor, since it's modifying
the anchor in the overlay's frame, so this name seems slightly more precise.
PiperOrigin-RevId: 562004292
Implement VideoCompositor support of:
* Different input and output sizes
* CompositorSettings, to customize output size based on input texture sizes
* OverlaySettings, to place an input frame in an arbitrary position on
the output frame.
Also, refactor Overlay's matrix logic to make it more reusable between
Compositor and Overlays
PiperOrigin-RevId: 561931854
The first call to method `registerInputStream` doesn't block.
Later successive calls to the method blocks until the previous register call
finishes.
PiperOrigin-RevId: 559694490
In addition to this being how Alpha should be handled, tests do fail under
API 29 without this CL. Unfortunately while these tests do fail under API 29
without this CL, we currently only run this test on API 33 emulators, so we
didn't catch this failure earlier (until compositor tests on mh failed on all
devices under API 29 and succeeded on all at or over 29).
PiperOrigin-RevId: 557781757
To ensure that for each output bitmap from the compostor, the right input
timestamps were used.
Only applied on a subset of tests to avoid needing to upload+maintain
too many files/size in the test binary, especially when it would test
duplicate behavior
PiperOrigin-RevId: 555222530
This means we now require 2+ input frames per input, and compare the primary
stream timestamp with secondary stream timestamps in order to select the
correct output timestamp. We also must release frames and back-pressure as
soon as possible to avoid blocking upstream VFPs.
Also, improve signalling of VFP onReadyToAcceptInputFrame
PiperOrigin-RevId: 553448965
This allows for custom implementations of this interface, like
a TestVideoCompositor or partner-implemented implementation
PiperOrigin-RevId: 552541631
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Move shared test logic to the test runner.
This does increase indirection, which isn't usually preferable in tests.
However, we will have many different tests that would use logic
like this, so this allows us to reduce repetition.
PiperOrigin-RevId: 551536438
For each event, the timestamp and presentation time is logged. The trace can
then be dumped to a tsv file and easily imported in a spreadsheet.
PiperOrigin-RevId: 550839156
signalEndOfInputStream is needed for when streams have different amounts of
frames, so that if the primary stream finishes after a secondary stream, it
can end without waiting indefinitely for the secondary stream's matching
timestamps.
onEnded mirrors this API on the output side, which will be necessary to
know when to call signalEndOfInput on downstream components (ex. on downstream)
VideoFrameProcessors
PiperOrigin-RevId: 549969933
This serves as a sort of test with more frames for the compositor for now
(before more varied video system tests come later when integrating with
Transformer), showing it doesn't error out and outputs the right
amount of frames.
Due to the VFPTestRunner having a 5s timeout, and mostly due to presubmit
emulators being very slow with OpenGL, there is a sort of limitation
to how many frames this type of test can have, depending on the test target
PiperOrigin-RevId: 548159762
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
This allows us to simplify and reduce thread initialization, hops and the
synchronization cost associated with them, especially when more and more VFPs
are used.
PiperOrigin-RevId: 545622169
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
In some cases the codec selected for decoding has a different MIME type than
the media. In thoses cases Transformer continued to use the media's MIME type
and that caused codec configuration failures.
Removed `EncoderUtil.findCodecForFormat()` as we stopped using the method it
uses for finding a codec. Plus, the method is only used in the test.
See also `MediaCodecUtil.getALternativeCodecMimeType()`.
PiperOrigin-RevId: 536683663
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
PiperOrigin-RevId: 531056436
When we created androidTests, in the past, they always had a URI pointing to a resource, therefore we always had a URI scheme. With texture input, this will not longer be the case (EditedMediaItems's may have URI.EMPTY, which have a null scheme) so we need to check for this so tests don't falsely fail.
PiperOrigin-RevId: 528848411
In ASwB, all Transformer tests can be run by right-clicking on the project and
clicking "Run all tests". We cannot, however, select only some specific test
files within a project (ex. all non-analysis tests) to run tests on.
Add @Ignore to analysis tests, which are not intended to be run anyways
when determining whether Transformer is working on some device. These
tests also don't have proper skipping logic when a device doesn't support a
format, so they can't be run effectively on low-end devices anyways.
This eases manual testing, for example when debugging whether tests all pass
on a device.
When analysis tests are desired to be run, it should be easy to comment out
the @Ignore.
PiperOrigin-RevId: 527289600
Allow the VideoFrameProcessor to output to a texture without an output surface.
Tested by updating texture output tests to no longer output to a surface.
PiperOrigin-RevId: 527244605
Previously, I assumed that SDR contents must be BT709, and HDR contents must be
BT2020. Turns out BT2020 is just wide-gamut, and SDR contents / transfers may be
represented in BT2020 color spaces.
Relax the check, so that we don't throw when valid BT2020 SMPTE 170M contents
are input into effects.
PiperOrigin-RevId: 526668347
`findDecoder/EncoderForFormat` seem to be more restrictive than querying
`MediaCodecList` as done for playback, and it's not clear that the cases where
no codec is found correspond to actual cases that would fail given that it
seems this returns an empty string for many cases in production.
Switch to using `MediaCodecUtil` and `EncoderUtil` for querying codecs instead.
PiperOrigin-RevId: 525078321
MediaMuxer does not support out-of-order video frames API 25. Use
a test file with frames in order in
loopingTranscodedAudio_producesExpectedResult. This is necessary for
tests that transmux video samples.
PiperOrigin-RevId: 524309318
A passthrough effect allows for testing having an intermediate
effect injected, which uses different OpenGL shaders from having no
effects.
PiperOrigin-RevId: 524276991
Previously `ChannelMixingAudioProcessor` output float because it was
implemented using the audio mixer's float mixing support.
Move the implementation over to just using the `ChannelMixingMatrix` and make
it publicly visible in the common module so it can be used by apps for both
playback and export.
Also resolve a TODO that no longer had a bug attached by implementing support
for putting multiple mixing matrices to handle different input audio channel
counts, and fix some nits in the test code.
Tested via unit tests and manually configuring a `ChannelMixingAudioProcessor`
in the transformer demo app and playing an audio stream that identifies
channels, and verifying that they are remapped as expected.
PiperOrigin-RevId: 523653901
Before this CL, SurfaceTexture.onFrameAvailable was used to tell whether a frame
was available in the VideoFrameProcessor's output texture. This was incorrect, as
it would rely on having the texture be written to before the
SurfaceTexture.onFrameAvailableListener is invoked, leading to null-pointer-
exceptions on timeouts.
Instead of using DefaultVideoFrameProcessor different interfaces to set that we
want to output to a texture, and get that output texture, use one interface that
sets a listener, and renders to a texture iff that listener is set. As this
listener is executed on the GL thread, this also allows us to no longer need to
expand visibility for the GL task executor and tasks.
PiperOrigin-RevId: 522362101
Previously, we always used ImageReader to read from the output of DefaultVideoFrameProcessor, for pixel tests. This has a limitation of not being
able to read HDR contents, so that we couldn't support HDR pixel tests.
Reading from a texture allows us to use glReadPixels to read from
DefaultVideoFrameProcessor, and build upon this to implement HDR pixel tests. We do
still want tests for surface output though, because real use-cases only will output
to Surfaces.
Also, add some tests for outputting to textures, since this test infrastructure is
a bit complex.
PiperOrigin-RevId: 519786535
The failure reason (no network) will be logged in the test output, but the test will not be marked as failing, rather skipped.
PiperOrigin-RevId: 518262203
This was trimmed using the Transformer Demo, from ~4 seconds to 300ms
Otherwise, this test file will be quite large, and folks who clone the repo will
have to clone this content as well. Trimming the file also allows the test to
take less time, while still testing the core purpose of the file, to confirm that 4k extraction/decode/GL/encode/muxing works.
PiperOrigin-RevId: 517408463
This test file used to be remote, which led to various errors in loading the file or timing out during the muxer or overall transformer.
export4k60 test timing on Pixel 7:
|Condition |elapsedTimeMs|AS Test "Duration" (s)|
|--------------------------|-------------|----------------------|
|local file (this CL) |4253 |14 |
|Remote file, googleguest |5510 |17 |
|Remote file, 4G |11423 |25 |
PiperOrigin-RevId: 516815462
This test is not run on emulator, triage or postsubmit, and does not
provide value to the library in it's current state. It could be
deleted, however it still may have use for analysis of exported files
on MH.
PiperOrigin-RevId: 516491160
Add format codec info, which can make test skipping checks more similar to the
actual Transformer decoder checks.
Also for the test file, the actual format was 720p, but somehow the file name and
media metadata indicated 1080p. This format mismatch led to some decoding errors,
so fix the format (and associated errors). This also allows us to remove the
exception catch in ForceInterpretHdrVideoAsSdrTest, which was included due to
errors from the incorrect format.
PiperOrigin-RevId: 511809507
Implement getMediaFormatInteger, a helper method simulating mediaformat.getInteger(name, defaultValue).
This reduces the API 29 restriction from MediaFormatUtil.getColorInfo to API 24, in
particular removing the method-based restriction to a constant-based restriction,
so that we can reduce usage of the API 29 class.
This also allows us to slightly simplify prior use-cases where we'd check
containsKey and getInteger to have a default value.
PiperOrigin-RevId: 511184301
Previously, this was limited to API 29. Expand this to all API versions.
Also, update the test to:
(1) skip based on SDR format input instead of HDR format input
(2) Check the exception message in order to disambiguate between the decoder tone
mapping error, and general video format support error.
PiperOrigin-RevId: 511002218
Rename ScaleToFitTransformation to ScaleAndRotateTransformation.
This better represents the operations that can be accomplished using this
effect. The name was originally named ScaleToFit* because it's not obvious how
to scale to fit using OpenGL, and this effect handled the scaling to fit in a way that no other MatrixTransformations did.
However, it's hard to discover how to rotate when skimming names of effects, so
it's probably more useful to convey that this effect rotates, than that it
scales to fit.
PiperOrigin-RevId: 510480078
Otherwise, a lack of HDR decoding support will result in the tests checking output files for HDR output, like HdrEditingTest.transform_noRequestedTranscode_hdr10File_transformsOrThrows, failing.
PiperOrigin-RevId: 510213020
Some of the test methods in `TransformationTest` don't check
capabilities. Add a check just scoped to decoding (not checking
encoding, but the default encoder factory may fall back).
PiperOrigin-RevId: 510088562
It may be confusing for 3P apps, for us to have separate error codes for (1) if
encoding HDR is not supported at all by the device, and (2) if encoding the
format, which happens to be HDR, is not supported by the device. Instead, we can
communicate this in the error message.
PiperOrigin-RevId: 509188666
It doesn't actually make sense for them to be placed in the Transformer, because the error's root causes are actually only in codecs. Also, a few codec errors were
repeated, so deduplicate these instances
PiperOrigin-RevId: 506937695
* Overload added `(cause, errorCode, isVideo, isDecoder, details)`,
where `details` is a string of values to be added to the error message
of the `TransformationException`.
* Overload with `MediaFormat` and `mediaCodecName` moved to
`DefaultCodec`, because all usages of that overload were from
`DefaultCodec`, and this allows a simplified API because of internally
stored values.
* `mediaCodecName` removed from overload that takes a `Format`.
* Reordered `createForCodec` parameters.
PiperOrigin-RevId: 506895268
Add checks to GL tone-mapping pixel tests, to ensure the device's decoder, API
version, and OpenGL implementation support GL tone-mapping before attempting it.
These tests should be run on mobile harness, to detect per-device failures, and
so are moved to transforemr/mh. Per b/263395272, these tests should ultimately
be in an effect/mh directory.
PiperOrigin-RevId: 505749974
Also add a Builder to EditedMediaItem to avoid having a constructor with
many optional parameters, or a chain of constructors.
PiperOrigin-RevId: 504588544
Also remove usages of TransformationRequest convenience methods
(setScale, setRotationDegrees and setResolution).
Some usages of setResolution can't be removed yet because they are used
for fallback.
PiperOrigin-RevId: 502415748
Note that we simply use GlEffectsFrameProcessor in-app / GL tone-mapping, so PQ->SDR tone-mapping isn't yet implemented.
Tested manually using the demo on Pixel 7, to confirm that device and in-app tone
mapping behave similarly.
PiperOrigin-RevId: 496700231
This should allow us to focus on HDR failures instead of network buffering
failures when debugging HDR issues.
These files are each used on several files, so it should be more worth the
test binary impact to move these files to local first.
Locally, tests did take less time after this diff
PiperOrigin-RevId: 496398130
Main change:
- Removed `Codec.EncoderFactory.createForVideoEncoding`'s argument of a list
of allowed MIME types
- Moved the check for whether a video MIME type is supported to VTSP
PiperOrigin-RevId: 491611799
This reduces the priority to best effort (from the default that seems to be best effort), and allows us to run SSIM even on 8k24fps video. Without this CL,
start()'ing a second codec may result in a MediaCodec.CodecException.
Tested to confirm that transformation8k24():
* fails deterministically without this CL, or with KEY_PRIORITY set to 0.
* succeeds deterministically after this CL (~18s on Samsung Z Fold 4)
PiperOrigin-RevId: 490570416
This allows us to release both codecs used in SSIM when one fails to
configure() or start().
Tested and confirmed that on Samsung Galaxy Z Flip 4, running all
TransformationTest.java tests, tests after transform8k24() fails to start the
2nd codec:
* Before this CL, all fail.
* After this CL, all pass.
PiperOrigin-RevId: 490461560
This exception is a bit shorter and more clear (and is more clear that this is a
test issue, as opposed to the prior issue that was thrown as an ExoPlayer
DataSourceException, which may seem like a legitimate Transformer failure)
PiperOrigin-RevId: 490252772
Following naming conventions throughout AndroidTestUtil, REMOTE files should have REMOTE instead of ASSET. Update the URI and FORMAT names accordingly.
PiperOrigin-RevId: 490237673
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
*** Original commit ***
Handle int instead of byte in SSIM.
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
***
PiperOrigin-RevId: 473259446
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
PiperOrigin-RevId: 473231779
Test that HDR editing succeeds on devices supporting HDR editing, tone maps on
devices supporting tone mapping, and throws exceptions on all other devices.
Also, only restrict HDR editing and tone mapping support to API 31+ only when
transcoding, not for all transformations.
PiperOrigin-RevId: 472958965
`requestCalculateSsim` more clearly represents the intention of the caller.
Also rephrase the javadoc to simplify it and make it more precise.
PiperOrigin-RevId: 465575578
Format.NO_VALUE is a placeholder value for an invalid @C.ColorTransfer, used
for example when the decoder doesn't support this transfer function.
When encountering this invalid value, interpret this as COLOR_TRANSFER_SDR.
Confirmed locally that an exception is thrown when transcoding on p4head, and no exception is thrown when transcoding with this CL.
PiperOrigin-RevId: 464135080
This will allow effects preview in ExoPlayer to use the
Effect and FrameProcessor interface (and the interfaces
they depend on) without depending on transformer or the
future effects module.
PiperOrigin-RevId: 464060047
Extract a FrameProcessor.Factory interface from GlEffectsFrameProcessor
and allow it to be customized using a setter on Transformer.Builder.
PiperOrigin-RevId: 463433438
Size requires API 21. Using Pair instead will allow effects to be
used from API 18 during previewing once they are moved out of
transformer.
PiperOrigin-RevId: 463206474
This is needed for applying effects to a playlist.
The effects are applied based on the presentation time of the
frame in its corresponding media item and the offset is added
back before encoding.
Each time the offset changes, end of input stream is signalled
to the texture processors. This is needed because the texture
processors can expect monotonically increasing timestamp within
the same input stream but when the offset changes, the timstamps
jump back to 0.
PiperOrigin-RevId: 462714966
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
This may happen when a containers' color transfer incorrectly does not match
the video's color transfer.
An example of a file with such a mismatch is the current Transformer demo HDR10
sample file.
Manually tested by confirming that no errors are emitted for SDR and HLG sample
files, and that errors are emitted for our incorrect HDR10 sample file.
PiperOrigin-RevId: 461583532
The GlEffectsFrameProcessor that will be part of the effects module
uses the DebugViewProvider. So it does not make sense for it
to be an inner interface of Transformer.
PiperOrigin-RevId: 458014932
The FinalMatrixTransformationProcessorWrapper ensures that the
surface is only replaced when it is not being rendered to and vice
versa.
PiperOrigin-RevId: 458007639
This will be useful for downgrading to a lower resolution during
a slow preview and for processing slide-shows once sequential
multi-asset editing is supported.
PiperOrigin-RevId: 457017255
videoEncoderFormatUnsupported_completesWithError() has recently
been flaky on API 31 emulators on presubmit because a different
exception than the expected exception is thrown.
This disables it on those emulators to reduce testing noise
until the underlying problem is investigated and resolved.
PiperOrigin-RevId: 456765512
This change is just renaming. There is no functional change intended.
The FrameProcessor interface will be created in a follow-up.
PiperOrigin-RevId: 456741628
After this change GlEffects can use any GlTextureProcessor not just
SingleFrameGlTextureProcessor.
MediaPipeProcessor now implements GlTextureProcessor directly which
allows it to reuse MediaPipe's output texture for its output texture
and avoids an extra copy shader step.
PiperOrigin-RevId: 456530718
This change adds a SurfaceProvider interface which is necessary to
allow for texture processors whose output size becomes available
asynchronously in follow-ups.
VTSP's implementation of this interface wraps the encoder and provides
its input surface together with the output frame width, height, and
orientation as used for encoder configuration.
The FrameProcessorChain converts the output frames to the provided
orientation and resolution using a ScaleToFitTransformation and
Presentation replacing EncoderCompatibilityTransformation.
PiperOrigin-RevId: 455112598
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
This removes the prior restriction of needing to remember not to crop and set aspect ratio in the same Presentation.Builder, and makes each class a bit more targeted.
This is partially made feasible by the past work to merge consecutive
MatrixTransformations into a single MatrixTransformationFrameProcessor, which
ensures that there's no loss in quality between successive MatrixTransformations.
PiperOrigin-RevId: 453660582
SingleFrameGlTextureProcessor is now an abstract class containing a
default implementation of the more flexible GlTextureProcessor interface
while still exposing the same simple abstract methods for single frame
processing it previously did.
FrameProcessorChain and GlEffect will be changed to use
GlTextureProcessor in follow-ups.
PiperOrigin-RevId: 453633000
Once the more advanced GlTextureProcessor interface exists,
it will be possible to change the output size of a GlTextureProcessor
between frames. To keep the re-configuration based on the frame sizes
minimal, things indepedent of the frame size, such as the GlProgram,
can be initialized in the constructor.
PiperOrigin-RevId: 451997584
ExoPlayer applies a large time offset to buffers so that, if the input has negative timestamps, generally buffers seen by the decoders should have positive timestamps. Modify how the offset is handled in `Transformer` so that decoders and encoders generally see positive timestamps, by leaving the offset on samples when reading them in the base renderer (remove the code that removed the offset), and then removing the offset when muxing. Also update the frame processor chain and slow motion flattening code to retain the existing behavior after this change (these both need original media presentation timestamps)
Tested via existing end-to-end tests and manually verified that the overlay frame processor shows the expected original media timestamps.
Aside: we don't need the same logic as ExoPlayer to track stream offsets across the decoder yet, because we don't try to handle stream changes during playback in single asset editing. (There is an edge case of multi-period DASH that may not work but I doubt anyone will use that as input to `Transformer` before we change the code to handle multi-asset properly.) In future we should try to refactor interaction with the decoder to use the same code for Transformer and ExoPlayer.
PiperOrigin-RevId: 451846055
Most devices won't support 8k decoding, so they'll skip this test entirely.
As the video is quite short, this test shouldn't be any longer than the nearby,
long-running 4k60 test.
PiperOrigin-RevId: 451423368
SSIM calculation requires the input and output dimensions to be identical.
For devices that can't encode the input dimensions, skip SSIM calculations and
log the cause. Only apply this on tests where the encoder may not support the
input file dimensions.
PiperOrigin-RevId: 451364904
Decode-only video frames (needed when the frame at / first frame after the
clipping start is not a key frame) need to be decoded but not passed to
the frame processor chain or encoder.
The clipping start offset needs to be removed from the frame timestamps
in the passthrough and video pipelines.
There are no changes needed for this in the audio pipeline, as it doesn't
use the input timestamps -- it uses its own timestamps derived from the
buffer sizes instead.
Also add demo option to try this out.
#minor-release
PiperOrigin-RevId: 451353609
Also update names of implementations to match design doc.
In follow-ups, SingleFrameGlTextureProcessor will become
an abstract implementation of a new GlTextureProcessor
interface.
Texture processor makes sense as it processes OpenGL textures.
The term frame processor will be used for something else in
follow-ups.
PiperOrigin-RevId: 451142085
There is a problem with the ImageReader formats used by the
SSIM helper that only occurs for Nexus 5 API 21, so as a workaround
we can skip the SSIM calculation on Nexus 5 API 21.
This skips just the SSIM calculation (by setting the value to
1.0 instead and logging). The tests still run when SSIM is skipped
so that we can detect other failures.
PiperOrigin-RevId: 450903183
When using a MatrixTransformationFrameProcessor per transformation
matrix, each frame processor's shader applies the matrix to the
vertices and clips the result to the NDC range when drawing the
output frame.
This change combines consecutive MatrixTransformations into a single
MatrixTransformationFrameProcessor by multiplying the individual
matrices while updating and clipping the visible polygon after
each matrix and mapping the resulting visible polygon back to the
input space so that its vertices and the combined transformation
matrix can be used in the shader.
PiperOrigin-RevId: 448521068
This listener replaces
FrameProcessorChain#getAndRethrowBackgroundExceptions.
The listener uses a new exception type FrameProcessingException
separate from TransformationException as the frame processing
components will be made reusable outside of transformer soon.
PiperOrigin-RevId: 447455746
ScaleToFitFrameProcessor, PresentationFrameProcessor,
and EncoderCompatibilityFrameProcessor now each implement
MatrixTransformation instead of wrapping
MatrixTransformationFrameProcessor.
PiperOrigin-RevId: 446480286
This change splits AdvancedFrameProcessor into 4 files:
- MatrixTransformationFrameProcessor for the GlFrameProcessor
implementation
- MatrixTransformation and GlMatrixTransformation for the GlEffect
specification
- MatrixUtils for the static matrix helpers
PiperOrigin-RevId: 446236384
To ensure frame processor operations operate on square pixels,
make the frame taller or wider for non-square input pixels.
In addition to automated tests, this was tested by changing the
inputFormat.pixelWidthHeightRatio in the TransformerVideoRenderer.
PiperOrigin-RevId: 444553517
This allows the actual bitmap to be saved, even if output
dimensions are different than expected. Otherwise, differing
output dimensions would throw an exception, preventing the bitmap
from being saved.
PiperOrigin-RevId: 444512210
This test should run on all devices from API 21 (the media uses Baseline
profile level 3.0 H.264) to give us coverage of the full pipeline (forcing
re-encoding) and SSIM calculation on all devices.
PiperOrigin-RevId: 443650002
Some devices under report their resolution support, like 2144 for 2160 in
H265, 1072 for 1080 in H264. This CL only takes care of these two cases,
- reporting 1920x1080 is supported when the device reports 1920x1072, and
- reporting 3840x2160 is supported when the device reports 3840x2144
PiperOrigin-RevId: 443095042
* Group what's now many related test PNGs by moving them to their own directory.
* Move bitmap references to files where they're used, as each bitmap is only
used once each, except the original bitmap.
PiperOrigin-RevId: 441485489
What a minimal implementation should include is now explained in the
interface javadoc while the method name reflects what the method does.
PiperOrigin-RevId: 441432059
The stream with the mp3 track is added because
- We only encode to AAC
- We only encode when the source track is not AAC
Now that we have a way to force encoding, we no longer need the mp3 track.
The test asset is kept for later parameterized testing.
PiperOrigin-RevId: 440876080
The MIME type was set to H265 to force transcoding. Now that we have an encoder
factory that forces encoding, switching back to H264 ensures the quality test
is conducted on more devices (those don't support H265 can be tested now).
However, H265 should be part of the quality test after we have proper mechanism
to skip test based on device capability.
PiperOrigin-RevId: 440132471
We don't currently have enough understanding of the correlation between a
specific SSIM score and video quality. Dropping to .90 to make most tests pass.
Especially when there's no discernible difference from the videos with .9 and
.95 SSIM.
PiperOrigin-RevId: 440047551
