The current implementation of ExoPlayer Cea708 is processing the whole service block without
taking into account the defined service block size, which could cause the execution of
unwanted command.
The following set of Cea708 represents a real use case of the above.
``` hex
FC9420FD152FFF0929FE8CFCFE9818FEE332FE731FFE1044FE8B03FE8CFCFE0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC942CFD1520FF4649FE8CFEFE9918FEE332FE731FFE1000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC942FFD9470FF8924FE8B03FE8CFCFE4A92FE0300FE9005FE0091FE2A00FE0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC9420FD97A1FFC829FE8CFEFE9918FEE332FE731FFE1043FE9203FE0100FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC94D6FDCEEFFF082AFE9202FE0C90FE0500FE912AFE0000FE424EFE6F00FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FCC168FD20F4FF4422FE4168FE4220FE7400FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC2C20FDE520FF8422FE2C20FE4265FE2000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC64EFFD70EFFFC422FE646FFE4270FE6F00FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC6EA7FD6E67FF0422FE6E27FE426EFE6700FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FCF420FD6173FF4422FE7420FE4261FE7300FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FC67E5FD206DFF8422FE6765FE4220FE6D00FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
FCF480FD7579FFC422FE7403FE4275FE7900FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
```
The above frames should be displaying the following text on the screen (or at least the first part of it).
```
Ah, don't get
all sappy about it
```
ExoPlayer is currently parsing this block as follow (in parentheses the defined service block size):
```
(2) 22416842207400
G0 A
G0 h
G0 B
G0 \u0020
G0 t
C0 COMMAND_NUL
(2) 222C2042652000
G0 ,
G0 \u0020
G0 B
G0 e
G0 \u0020
C0 COMMAND_NUL
(2) 22646F42706F00
G0 d
G0 o
G0 B
G0 p
G0 o
C0 COMMAND_NUL
(2) 226E27426E6700
G0 n
G0 '
G0 B
G0 n
G0 g
C0 COMMAND_NUL
(2) 22742042617300
G0 t
G0 \u0020
G0 B
G0 a
G0 s
C0 COMMAND_NUL
(2) 22676542206D00
G0 g
G0 e
G0 B
G0 \u0020
G0 m
C0 COMMAND_NUL
(2) 22740342757900
G0 t
C0 COMMAND_ETX
G0 B
G0 u
G0 y
C0 COMMAND_NUL
(2) 2392030C4220730000
C1 COMMAND_SPL
G0 B
G0 \u0020
G0 s
C0 COMMAND_NUL
C0 COMMAND_NUL
(2) 22616C42656E00
G0 a
G0 l
G0 B
G0 e
G0 n
C0 COMMAND_NUL
```
So it ended up processing the following cue text (additional unwanted commands could be executed as well)
```
AhB t, Be doBpon'Bngt BasgeB mt
BuyB salBen
```
If instead the parsing logic take into account the service block size
```
(2) 22416842207400
G0 A
G0 h
(2) 222C2042652000
G0 ,
G0 \u0020
(2) 22646F42706F00
G0 d
G0 o
(2) 226E27426E6700
G0 n
G0 '
(2) 22742042617300
G0 t
G0 \u0020
(2) 22676542206D00
G0 g
G0 e
(2) 22740342757900
G0 t
C0 COMMAND_ETX
(2) 2392030C4220730000
C1 COMMAND_SPL
(2) 22616C42656E00
G0 a
G0 l
```
which is translated to (again I didn't processed all the frames, just a few of them)
```
Ah, don't get
al
```
which is what we are looking for.
This PR modifies service block parsing logic to honor service block size instead of read the full service block buffer.
Signed-off-by: Jorge Ruesga <jorge@ruesga.com>
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (example: ExoPlayerImpl.setListener was renamed to
setEventListener).
#minor-release
PiperOrigin-RevId: 425823095
Tested by confirming transformations still work and write to a output file in a
scoped-storage directory on a:
* Nexus 6P API 23 emulator
* Google Pixel 4 API 31 physical device
PiperOrigin-RevId: 425644266
In some cases we create empty playback metrics with no corresponding
events (e.g. when an app seeks to a new media item and immediately
releases the player). There is no benefit in having completely empty
metrics entries, so it's cleaner to not report them in such cases.
#minor-release
PiperOrigin-RevId: 425609010
- Add a checkbox in the demo app to enable experimental HDR editing.
- Add an `experimental_` method to `TransformationRequest` to enable HDR editing.
- Add fragment/vertex shaders for the experimental HDR pipeline. The main difference compared to the existing shaders is that we sample from the decoder in YUV rather than RGB (because the YUV -> RGB conversion in the graphics driver is not precisely defined, so we need to do this to get consistent results), which requires the use of ES 3, and then do a crude YUV -> RGB conversion in the shader (ignoring the input color primaries for now).
- When HDR editing is enabled, we force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
PiperOrigin-RevId: 425570639
TransformerTest sounds like a unit test for Transformer but these
tests test behaviour that involves multiple stages of the pipeline.
PiperOrigin-RevId: 425378369
Add a constructor that takes a DrmSessionManagerProvider.
This allows R8 to strip the default implementation.
#minor-release
PiperOrigin-RevId: 425330083
Some phone with limited memory can't allocate bigger
shared memory buffers.
This might or might not be related to Binder's 1M
transaction limit.
Tested on Pixel 4 by setting the minimum buffer size to
1h.
https://github.com/google/ExoPlayer/issues/9712
#minor-release
PiperOrigin-RevId: 425324536
If
a) the end of stream buffer arrives with a frame rather than an
empty buffer or
b) processDataV29() renders several decoder output buffers to the
FrameEditor's input Surface immediately before encountering the
EOS flag
these frames were previously stuck in the FrameEditor's input Surface
and never fed to the encoder.
PiperOrigin-RevId: 424898820
This test tests that all frames are processed when transcoding
video to a different sample MIME type (and that the transformation
completes successfully).
PiperOrigin-RevId: 424896014
Enforcing the correct thread usage has been enabled since 2.13.0.
Opting-out of this enforement is dangerous as it can hide very hard
to debug bugs.
PiperOrigin-RevId: 424815808
If muxerWrapper.release() was throwing an exception, the progress state
was not updated and getProgress could throw an exception.
#minor-release
PiperOrigin-RevId: 424696783
When the decoder output buffer was partially read, a call to
Codec.getOutputBuffer() was returning the same buffer, but with the
position reset to 0. The reason was that, in
Codec.maybeDequeueAndSetOutputBuffer(), mediaCodec.getOutputBuffer()
was called with the same buffer index (L350 in old rev), even though
there was already a buffer available (outputBufferIndex >=0). This
change avoids calling mediaCodec.getOutputBuffer() if the previous
buffer has not been released.
#minor-release
PiperOrigin-RevId: 424612197
If the encoder picks a fallback resolution the video pipeline needs
to take this into account when configuring the frameEditor and when
setting up the fallback TransformationRequest that's passed to the
fallbackListener.
PiperOrigin-RevId: 424611290
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 424602011
AnalyticsCollector can't be null when passed into ExoPlayerImplInternal,
so there is no need to pass it around as nullable.
PiperOrigin-RevId: 424594031
Two of the sessions are finished at the same time in the test
and the order of the corresponding callbacks depends on the randomly
generated session string and the order these strings are stored in a
HashSet.
Update test to assert both callbacks are called and they contain the
right arguments, but don't assert on the order of these two callbacks.
PiperOrigin-RevId: 424548819
Ad playback shouldn't be affected by manual speed adjustments set
by the user. This change enforces unit speed for ad playback.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424546258
This only affects playbacks using the
experimentalUseProgressiveMediaSourceForSubtitles method.
Also update the SingleSampleMediaSource instantiation to be more
similar, to try and highlight differences like this in future.
PiperOrigin-RevId: 424545980
In some cases we need to update the PlaybackParameters at period
boundaries, for example when switching from live to VOD and live
playback speed adjustment was still active at the point of switching.
Currently, we send the update when the playing MediaPeriod changes in
EPII, which is slightly too late because the new speed gets only applied
after the entire existing AudioTrack buffer has been played out.
We can time the update slightly better by updating the values at the
point where we change the reading period. This makes the update slightly
too early because it also applies to all samples currently in the
decoder. But generally, this is a lot better because the time spent
in the decoder is likely to be considerably lower than the duration of
the AudioTrack buffer.
Note that this change isn't perfectly aligning to the period boundary,
but reduces the number of samples with the wrong speed to a minimum.
If we are getting around to add additional code that allows updating
the speed at exactly the boundary, it also needs to be triggered from
the reading period update, so the new code location is also helpful in
the future.
Issue: google/ExoPlayer#9018
PiperOrigin-RevId: 424540551
Issue: google/ExoPlayer#9775
We got a few issues for this on GH already. Some RTSP servers do not provide
track timing in PLAY responses, or the timings are invalid.
Missing timing means the RTSP stream is not seekable. Added method to
1. Update the timeline that seek is not possible
2. Report read discontinuity so that playback can start from the beginning.
PiperOrigin-RevId: 423281439
If the output sample MIME type is inferred from the input
but is not supported by the muxer, we fallback to transcoding
to a supported sample MIME type.
The audio and video renderers need to make sure not to select the PassthroughSamplePipeline for this case. Which sample MIME type
to choose is decided by the EncoderFactory.
PiperOrigin-RevId: 423272812
To avoid the `MediaPeriodQueue`to discard the reading period, we can set the next ad of an ad group early and then (possibly) only change it's duration once we receive the actual duration. This way we avoid a rebuffering as a result of the reading period being discarded.
The change also takes care to properly set ad break and their durations when we join the live stream at the moment when an ad is playing.
PiperOrigin-RevId: 423163467
We currently only end sessions on Timeline updates if the associated media
is no longer in the playlist. But we should also end all sessions that are
finished as a result of the timeline update (similar to how this is done for
discontinuities). This issue was introduced by 394ab7bcfd
PiperOrigin-RevId: 423075855
We currently don't check which session is causing a network transfer
(it could be a preloaded item in a playlist). To clearly associate
network transfer data with sessions, we need to keep track of
transferred bytes and transfer time per session.
PiperOrigin-RevId: 422867845
We may fall back to a different sample MIME type because
a) the sample MIME type inferred from the input is not supported
by the muxer or b) no encoders are available for the the requested
sample MIME type.
PiperOrigin-RevId: 422849036
With this change, the MediaCodecAudioRenderer configures the MediaCodec
to not downmix audio only if spatialization can be applied. This way,
decoders who are downmixing by default are left doing so when
spatialization cannot be applied. The renderer re-initializes the codec
when spatialization properties change mid-playback.
PiperOrigin-RevId: 422822952
TransformationRequest is otherwise immutable, so if we modify the
transformationMatrix in place (done before this cl) this may cause
confusing behaviour for apps when they reuse a TransformationRequest.
PiperOrigin-RevId: 422822916
Currently, we keep the values for dropped/played frames, audio underruns
and current formats from the last session, causing double reporting
of counters and wrong track change reasons for formats. All these
values should be reset when the active session is finished, so that the
new session can start from scratch.
PiperOrigin-RevId: 422798406
Currently, we always end the current session if onSessionFinished is
called. However, the finished session may not be the active one (for
example when discarding prebuffered items in a playlist). To make this
code more robust, we can save the active session id explicitly and only
end this session.
PiperOrigin-RevId: 422788542
After implementing fallback, it won't always be possible to
differentiate between muxer and encoder as the cause of an output
format not being supported.
PiperOrigin-RevId: 422780443
This change enables the ImaServerSideAdInsertionMediaSource for multi-period content. The global ad playback state is split into pieces for each period and the window and period durations are calculated accordingly in the ServerSideAdInsertionTimeline.
For multi-period live content (DASH), the ad playback state is not set with this change. This is deferred to a follow up CL. Splitting is very tricky. For each timeline update the windowStartTimeUs may vary for some milliseconds relative to the start of the period.positionInWindowUs. This requires to either introduce some fuzzy logic or to choose a different approach than for multi-period VOD. Because mistakes within the playback states of subsequent moving live windows produces crashes, it seems sensible to defer this for now and keep this change in a separate future CL (unblock further work, easy to rollback).
In this state, live DASH stream are working and the ad overlay is placed over the player correctly bu the SDK. However, ads are not reported by the position discontinuity event. Similarly, the player.isPlayingAd() does never returns true when a ad period is playing.
PiperOrigin-RevId: 422539770
This CL implements fixing the input format to the encoder spec. Fixed
parameters include:
- MIME type
- Profile & level
- Resolution
- frame rate, and
- bitrate
PiperOrigin-RevId: 422513738
The MediaMetricsListener currently just looks at the mime type and
doesn't use the inference based on the URI if no mime type is set.
Also change default type to OTHER to avoid classifying streams from
URLs without clear file extension as progressive.
PiperOrigin-RevId: 422373381
Instead of having types in flac inherit types in vorbis, make types in
vorbis inherit types in flac. This is a bit of a hack and somewhat
messy, but it retains backwards compatibility.
Collapse the two variations of `VorbisUtil.buildMetadata` into a single
method called `VorbisUtil.parseVorbisComments` that only takes a list
of vorbis strings, compared to previously where it would take strings
and picture frame instance. Any code that relied on the old signature
now either concatenates picture frames and vorbis comments or copies
vorbis comments into an existing metadata instance.
Simplify how the comment header is parsed and eliminate a few possible
bugs in the process, such as:
- Metadata being overwritten directly by the comments header.
- The packet being rewound to 0 if it cannot find a comment header,
which might result in the cursor being moved to a bad position.
In the old `flac` module, superclass the deprecated types under the
moved types in the `vorbis` module. This ensures backwards compat
with existing library users.
Adaptive video and audio selections will be limited to formats with
the same level of DecoderSupport and HardwareAccelatationSupport, unless
specifically allowed by new flags.
If different levels of decoder support are available, prefer primary
over fallback decoders and hardware-accelerated over software decoders
(in this order). For video, also prefer more efficient codecs, if both
are supported by hardware-accelerated primary decoders.
Issue: google/ExoPlayer#4835
Issue: google/ExoPlayer#9565
PiperOrigin-RevId: 422345048
This change moves the video track selection to the generic
selection method introcuced for audio and text. This ensures
we can apply the same criteria for fixed and adaptive video
track selections. Implicitly, this reorders the preferences
for adaptive tracks to give non-quality preferences (like
preferred MIME type or preferred role flags) a higher priority
than number of tracks in the selection.
Issue: google/ExoPlayer#9519
PiperOrigin-RevId: 422310902
This does currently only happen by chance in replaceStream (called from
enable) if the stream previosly played read until C.TIME_END_OF_SOURCE.
enable already makes all changes done in resetPosition (except resetting
the reading position), so it's less error-prone and makes the intention
clearer if the same code is called from both enable and resetPosition.
The effect of this bug was quite limited because the numerical value
of readingPositionUs was only relevant for periods with changing
durations and server-side inserted ads.
PiperOrigin-RevId: 422300690
The app will be notified about fallback using a callback on
Transformer.Listener. Fallback may be applied separately for
the audio and video options, so an intermediate internal
FallbackListener is needed to accumulate and merge the track-specific
changes to the TransformationRequest.
PiperOrigin-RevId: 421839991
We currently run (almost) the same code for all track types.
De-duplicate this by using a single method that takes functional
interfaces for track-type dependent logic.
This has the benefit that all track-type dependent logic is
contained within their subclasses and the generic logic doesn't
need to make any assumption about the eligibility of tracks for
selection or adaptation, and doesn't need to access Parameters.
Make this change for audio and text only for now. Video can
be updated in a subsequent change.
PiperOrigin-RevId: 421811411
Simplifying and clarifying variables, and adding comments.
Tested by confirming demo-gl and demo-transformer both
correctly display videos
PiperOrigin-RevId: 421792079
The existing wording would be correct if prefixed with
"Returns false if [...]", but it seems confusing to a document a boolean
method in terms the condition it returns false - so I reworded it in
terms of when it returns true.
#minor-release
PiperOrigin-RevId: 421682584
After this change exceptions throw by MediaCodec during
encoding/decoding will result in TransformationExceptions with
ERROR_CODE_ENCODING_FAILED/ERROR_CODE_DECODING_FAILED.
Before this change ERROR_CODE_FAILED_RUNTIME_CHECK was used.
PiperOrigin-RevId: 421560396
Expected images are taken on emulators, so a larger acceptable
difference from expected images must be accepted on physical devices.
PiperOrigin-RevId: 421543441
Live speed adjustment is used for all live playback at the moment,
but has no user visible effect if the media is not played with low
latency. To avoid unnecessary adjustment during playback without
benefit, this change restricts the live speed adjustment to cases
where either the user requested a speed value in the MediaItem or the
media specifically defined a low-latency stream.
Issue: google/ExoPlayer#9329
PiperOrigin-RevId: 421514283
This ensures we test the API level specific logic, in particular
around 5G-NSA detection.
Robolectric has a remaining bug that it doesn't support listening
to service state changes. Hence, we need to ignore some tests on
these API levels still until this is fixed.
PiperOrigin-RevId: 421505951
Codec and its factories can use MediaCodec directly as for API >= 21,
the SynchronousMediaCodecAdapter methods used in Codec just correspond
to a single MediaCodec call each so there is no reason to have another
wrapping layer.
PiperOrigin-RevId: 421041177
Exceptions thrown by MediaMuxer are converted MuxerExceptions
and later to TransformationExceptions with ERROR_CODE_MUXING_FAILED.
PiperOrigin-RevId: 421033721
The media codec renderers have fallback logic in getDecoderInfos
to assume that E-AC3 decoders can handle the 2D version of E-AC3-JOC and
that H264/H265 decoders can handle some base layer of Dolby Vision
content. Both fallbacks are useful if there is no decoder for the
enhanced Dolby formats.
Both fallbacks are not applied during track selection at the moment
because the separate MediaCodecInfo.isCodecSupported method verifies
that the mime type corresponding to format.codecs is the same as the
decoder mime type (which isn't true for the fallback case).
To fix the fallback logic, we can just completely remove this additional
check because it's not needed in the context of this method that is only
called after we already established that the decoder can handle the
format.sampleMimeType.
In addition, we need to map the Dolby Vision profiles to the equivalent
H264/H265 profile to make the codec profile comparison sensible again.
PiperOrigin-RevId: 420959104
SampleQueues may be released in the context of a finally block
after an out of memory error. Allocating in that scenario can
throw yet a new OutOfMemoryError. By safely releasing SampleQueue
memory, we increase the possibility of handling the error
gracefully.
PiperOrigin-RevId: 420859022
This method has been deprecated since 2.12.0 ([commit](d1bbd3507a)).
Also remove
DashMediaSource.Factory#setLivePresentationDelayMs(long, boolean), this
method has been deprecated since 2.13.0 ([commit](41b58d503a)).
PiperOrigin-RevId: 420719877
This class is already called StyledPlayerControlViewLayoutManager, it
seems unecessary to repeate the 'styled' word again in this context.
PiperOrigin-RevId: 420711161
These were missed in 46ab94bd41
These references will be re-written to PlayerView when exporting to
exoplayer2, so this commit results in some small reformatting changes.
Also fix a reference to LegacyPlayerControlView that should be
StyledPlayerControlView.
PiperOrigin-RevId: 420707706
The draw method was disabling vertex attrib arrays but not re-enabling them. Remove the call to disable the vertex attrib arrays so that then remain enabled after the program is created.
Manually verified by setting the surface type to spherical in the demo app and playing a spherical sample video.
Issue: google/ExoPlayer#9782
PiperOrigin-RevId: 420707503
Refactor the overall module to place the unified vorbis tags into a
single package called `vorbis`. Also re-intoduce the vorbis tags
in their original `flac` module, but deprecate them.
The encoder and sonic are now set up in the constructor rather
than in a configuration method called from processData(). This
is more similar to VideoSamplePipeline and reduces null checks.
PiperOrigin-RevId: 420260526
Only allowing TransformationExceptions to be created using the factory methods helps keeping error messages consistent. This is consistent with ExoPlaybackException.
PiperOrigin-RevId: 419841025
The UI component will be switched over to use them in a
subsequent commit, once the translations have been
imported.
Issue: google/ExoPlayer#9811
PiperOrigin-RevId: 419632617
Compensate for aspect ratio of input frames, so that they're applied on
rectangular frames instead of square normalized-device-coordinate frames.
This fixes distortion most visible when rotating any GL video 45°
(non-rectangular frames) or 90° (stretched frames)
Tested by rotating several landscape/portrait demo videos.
(Automated tests will follow in <unknown commit>)
PiperOrigin-RevId: 419619743
* Move checking that the output format is supported by the muxer
from supportsFormat (which deals with the input format) to
ensureConfigured.
* Add maps for the supported MIME types so that the muxer can
return what MIME types it supports rather than just check a
MIME type.
PiperOrigin-RevId: 419578165
The `main` role distinguishes a track from an `alternate`, but unlike
`SELECTION_FLAG_DEFAULT` it doesn't imply the track should be selected
unless user preferences state otherwise. e.g. in the case of a text
track, the player shouldn't enable subtitle rendering just because a
`main` text track is present in the manifest.
The `main`/`alternate` distinction is still available through
`Format.roleFlags` and the `ROLE_FLAG_MAIN` and `ROLE_FLAG_ALTERNATE`
values.
This behaviour was originally [added in 2.2.0](7f967f3057),
however at the time the `C.RoleFlags` IntDef did not exist. The IntDef
was [added in 2.10.0](a86a9137be).
PiperOrigin-RevId: 418937747
* @Override is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs. @CryptoType is a TYPE_USE annotation, so should appear after modifiers and directly before the type.
PiperOrigin-RevId: 418811744
This is better than silently dropping tracks as done previously. Later,
we will implement fallback to transcoding to a supported MIME type.
PiperOrigin-RevId: 418006258
This more closely matches the pattern we have for all implementations
except DefaultMediaSourceFactory (e.g. ProgressiveMediaSource.Factory)
and other factory interfaces like (Http)DataSource.Factory.
PiperOrigin-RevId: 417826803
Switch to using sentence-case naming convention but with one character prefixes for different types.
This is a no-op change.
PiperOrigin-RevId: 417791624
Some have been deprecated since 2.13.0
([commit](5b9fa7d7d9)):
* `setDrmSessionManager(DrmSessionManager)`
* `setDrmHttpDataSourceFactory(HttpDataSource.Factory)`
* `setDrmUserAgent(String)`
And the rest have been deprecated since 2.12.0
([commit](d1bbd3507a)):
* `setStreamKeys(List<String>)`
* `createMediaSource(Uri)`
PiperOrigin-RevId: 417622794
Move static factories into a separate class and make it implement an interface
that will let tests customize encoder/decoder creation.
PiperOrigin-RevId: 417610825
To support multi-period content we need to store AdPlaybackStates and
SharedMediaPeriod by the periodUid as a key. While after this no-op CL,
we still only support single-period content, storing these resources by
periodUid is the ground work for multi-period support being added in an
follow-up CL.
PiperOrigin-RevId: 416836445
Keep the old interface deprecated so any app code implementing it by
name (rather than with a lambda) will continue to work.
PiperOrigin-RevId: 416816566
Transformer uses ExoPlayer for reading input. Apps using Transformer
do not need to know this. So, PlaybackExceptions are converted to
TransformationExceptions with the same message, cause and error code.
The corresponding IO error codes are copied from PlaybackException.
PiperOrigin-RevId: 416793741
We check the fraction of the available duration we have already
buffered for live streams to see if we can increase the quality.
This fraction compares against the overall available media duration
at the time of the track selection, which by definition can't include
one of the availabe chunks (as this is the one we want to load next).
That means, for example, that for a reasonable live offset of 3 segments
we can at most reach a fraction of 0.66, which is less than our default
threshold of 0.75, meaning we can never switch up.
By subtracting one chunk duration from the available duration, we make
this comparison fair again and allow all live streams (regardless of
live offset) to reach up to 100% buffered data (which is above our
default value of 75%), so that they can increase the quality.
Issue: google/ExoPlayer#9784
PiperOrigin-RevId: 416791033
Before the introduction of the MediaCodecAdapter, users could get
access directly to the MediaCodec instance from
MediaCodecRenderer.getCodec() and then retrieve the codec metrics.
This change exposes MediaCodec.getMetrics() on the MediaCodecAdapter.
Issue: google/ExoPlayer#9766
#minor-release
PiperOrigin-RevId: 416343023
This is a no-op because all the <resource> elements from these XML
files are effectively concatenated together during building.
PiperOrigin-RevId: 416326534
*** Original commit ***
Rollback of 0aa23b08b1
*** Original commit ***
Add capability flags for hardware and decoder support
Issue: google/ExoPlayer#9565
***
***
PiperOrigin-RevId: 416285603
*** Original commit ***
Rollback of 27f905f571
*** Original commit ***
Don't sort decoders by format support in supportsFormat
This is a no-op change that updates supportsFormat to use the
decoder list before it's reordered by format support. Instead,
supportsFormat iterates through the decoders listed in their
original priority order as specified by the MediaCodecSelector.
The end result is identical.
This is n...
***
PiperOrigin-RevId: 416269130
*** Original commit ***
Don't sort decoders by format support in supportsFormat
This is a no-op change that updates supportsFormat to use the
decoder list before it's reordered by format support. Instead,
supportsFormat iterates through the decoders listed in their
original priority order as specified by the MediaCodecSelector.
The end result is identical.
This is necessary groundwork for a subsequent change that will
indicate in Capabilities whether the decoder that suppports the
format is the primary one as specifi
***
PiperOrigin-RevId: 416170612
This change adds a delegate class that loads and forwards calls
to a Spatializer with reflection, so that we can use the Spatializer
API before we update the compile SDK target to 32.
PiperOrigin-RevId: 416027289
The Robolectric implementation of HttpURLConnection forwards to the JRE
implementation [1], which behaves differently to the Android one
available on devices and emulators. For these tests to be a realistic
test of the HTTP stack used in real playbacks we can't use Robolectric.
Similar to df0e89c167
[1] https://github.com/robolectric/robolectric/issues/6769#issuecomment-943556156
PiperOrigin-RevId: 416013662
Opening the `DataSource` is one of the longer operations in the `Loader` sequence, as it requires a round trip to the origin server. This change allows all the potential `Loader` threads to perform this operation before one of them is forced to wait on shared TimestampAdjuster initialization.
Also, the initialization segment load will never produce media samples, so there is no need for it to wait for `TimestampAdjuster` initialization.
UnsupportedEglVersionException() is only used once, and seems a bit too
specific for Transformer. Also, it's possible for eglCreateContext to fail for
other reasons besides lack of support, so it wasn't always accurate when
thrown.
It is possible for devices not to support EGL version 2.0 though, per
https://source.android.com/devices/graphics/implement-opengl-es, which doesn't
specify the EGL version that must be supported.
PiperOrigin-RevId: 415489396
tl;dr:
In the previous transformer, the transcoding flow is
- If a the GL's input surface (from decoder) does not have data, wait 10ms
(DO_SOME_WORK)
- Else, make the decoder render **ONE** frame to the GL's input surface
- Wait at least 10ms, until the frame's texture is available
- Then process the texture
The process is quite slow, so in the new version, we do:
- If a the GL's input surface (from decoder) does not have data, wait 10ms
(DO_SOME_WORK) **same**
- Else, make the decoder render **as many frames** to the GL's input surface
- Process **as many** available textures in this DO_SOME_WORK cycle
PiperOrigin-RevId: 415474722
*** Original commit ***
Make audio track min buffer size configurable.
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
***
PiperOrigin-RevId: 415469179
The input rotation is used to rotate the video during decoding, the
video is rotated so that it is in landscape orientation before encoding
and a rotation is added to the output format where necessary so that
the output video has the same orientation as the input.
PiperOrigin-RevId: 415301328
Refactor GlUtil.java to be a bit more readable. Also, reorder, inline, and
rename a few things. Refactoring change only. No functional changes intended.
PiperOrigin-RevId: 415283874
For DASH manifests, we merge min/max live latency values from various
sources and they may not be consistent with each other. To ensure we
use a sensible configuration in all cases, we can add more correctness
checks:
1. Limit the min/max values to fall into the available live window.
2. Ensure that maxLatency >= minLatency in all cases.
Issue: google/ExoPlayer#9750
PiperOrigin-RevId: 415282938
Move the code in its own class as DefaultAudioTrack
is getting very big. It also help for testability.
The new class is easily configurable and highly tested.
Manual test was used to catch any regression.
https://github.com/google/ExoPlayer/issues/8891
PiperOrigin-RevId: 415268938
Being able to see the output of the GL pipeline is useful for debugging. For
example, when we previously saw flakiness it would have been useful to be able
to tell quickly whether the output looked wrong without needing to run a
transformation to the end then inspect the output file, and when working on
support for HDR editing it's useful to be able to do manual testing on devices
that don't support HDR encoding (but do support decoding/processing it with
GL).
Also change the progress indicator to be linear as this looks better in the
demo app when shown next to the debug preview.
PiperOrigin-RevId: 414999491
This is a no-op change that updates supportsFormat to use the
decoder list before it's reordered by format support. Instead,
supportsFormat iterates through the decoders listed in their
original priority order as specified by the MediaCodecSelector.
The end result is identical.
This is necessary groundwork for a subsequent change that will
indicate in Capabilities whether the decoder that suppports the
format is the primary one as specified by the MediaCodecSelector
(i.e., the one at index=0 in the lists that are now used).
Issue: google/ExoPlayer#9565
PiperOrigin-RevId: 414971986
The color set via textAppearance is overridden by any non-null
textColor set directly on the style. We always want the specific
properties the textAppearance specifies, so set them directly to
prevent them from being overridden.
#minor-release
Issue: google/ExoPlayer#9765
PiperOrigin-RevId: 414967143
Configure MediaCodec in API 32+ to always output 99 channels
so that we use the audio is spatialized, if the platform can apply
spatialization to it.
In a follow-up change, the output channel count will be set based on the
device's spatialization capabilities.
PiperOrigin-RevId: 414751543
`DefaultAudioSink` already has 3 telescoping
constructors and an other one would be have been
needed to add a buffer size tuning option.
PiperOrigin-RevId: 414703366
The existing code creates an imbalance between `inputBufferCount` and
`droppedBufferCount` by adding 'dropped source buffers' to
`droppedBufferCount` but not to `inputBufferCount`. This results in
assertion failures in `DashTestRunner`.
PiperOrigin-RevId: 414672175
It's been observed that some devices fail when releasing a secure codec
attached to a surface and immediately trying to create a new codec
(secure or insecure) attached to the same surface. This change catches
all exceptions thrown during codec creation, sleeps for a short time,
and then retries the codec creation. This is observed to fix the problem
(we believe this is because it allows enough time for some background
part of the previous codec release operation to complete).
This change should have no effect on the control flow when codec
creation succeeds first time. It will introduce a slight delay when
creating the preferred codec fails (while we sleep and retry), which
will either delay propagating a permanent error or attempting to
initialize a fallback decoder. We can't avoid the extra delay to
instantiating the fallback decoder because we can't know whether we
expect the second attempt to create the preferred decoder to succeed or
fail. The benefit to always retrying the preferred decoder creation
(fixing playback failures) outweighs the unfortunate additional delay
to instantiating fallback decoders.
Issue: google/ExoPlayer#8696
#minor-release
PiperOrigin-RevId: 414671743
The TrackSelection API returns two indexes, the index of the selected
track (`getSelectedIndex()`) and the index in the `TrackGroup`. The `HlsChunkSource`
and `HlsSampleStreamWrapper` should only work with the later.
Actually the `getSelectedIndex()`, current selected track index is really only useful on
the API to determine if there is a valid selection or not. The index is
really internal to `TrackSelection`
Also, add 144p as an acceptable output resolution, to allow for
a more obvious resolution difference when running the demo.
PiperOrigin-RevId: 414406664
The new field matches the platform's
AudioAttributes.getSpatializationBehavior() API added in Sv2. At the
moment, the platform API is called via reflection, until Sv2 is released
and the compile SDK target can be increased to 32.
PiperOrigin-RevId: 414406126
outputHeight is the actual output height while
transformation.outputHeight could be Format.NO_VALUE
causing the FrameEditor to be used more often than
necessary in the old version.
PiperOrigin-RevId: 414304251
When calling Android's Log class directly, there's a LongLogTag
lint check that detects tags over the 23 char limit, however it
cannot detect long log tags in ExoPlayer due to the way that we
log via our own Log class. This commit adds @Size annotations to
enforce the same rule.
PiperOrigin-RevId: 413976364
On the Sony Android TV device where this was originally reproducible on Android L, on Android N there is an E-AC3 decoder listed which handles the stream correctly. The workaround is harmless anyway but adding the API version restriction means it will be obvious it can be removed once we bump our min API to 24 or above in the future.
#minor-release
PiperOrigin-RevId: 413967443
Using chunkless preparation greatly improves start up time if the master
playlist declares CODECS for the renditions. Hence, we turn this on
by default as it benefits most well-defined HLS master playlists.
The only known reason why developers may want to turn this feature off is
when the renditions contain muxed closed-caption tracks that are not
declared in the master playlist. So this change also updates the documentation
and RELEASENOTES to point out this caveat.
PiperOrigin-RevId: 413950036
Increase timeout for dequeueing a frame from the codec to reduce flakiness. At a timeout of 2 seconds there was a 2/1000 flake rate and at 3 seconds 0/1000. Set the timeout to 5 seconds to give plenty of leeway.
PiperOrigin-RevId: 413946915
Hardware audio decoders aren't really a thing, particularly on older
devices. SOC vendors do sometimes provide their own software decoders
though. Hence we update the approximation to assume that audio
decoders on older devices are software.
PiperOrigin-RevId: 413757859
Issue: google/ExoPlayer#9744
We do not rely on the payload type to determine the sample MIME type, we depend
on the SDP message, so it's worthless checking the payload type.
After removing the line, a server can use payload type 35 (an unassigned
payload type) for H264; while normally H264 requires payload type >= 96).
PiperOrigin-RevId: 413658076
Previously, transformation_matrix was incorrectly applied to
texture sampling coordinates, which led to transformations
seemingly moving in the opposite position, and an undesirable
GL_CLAMP_TO_EDGE behavior when sampling outside the edge of
the texture.
PiperOrigin-RevId: 413653360
Allowing duplicate groups caused some other code working with the
array to use reference equality comparison. This is error-prone,
easily forgotten (e.g. when using the TrackGroups in a map) and
causes bugs when TrackGroups are serialized to disk or to another
process.
All TrackGroups created by ExoPlayer are already unique and custom
code creating TrackGroupArrays with identical groups can easily
distringuish them by adding an id to each group.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413617005
It seems fine to remove the documentation about the WebM case now we are only supporting unfragmented MP4, so that new users coming to this API aren't confused about how to set the container MIME type.
PiperOrigin-RevId: 413611472
This allows to give TrackGroups an identifier. The underlying goal is
to provide a way to make otherwise identical TrackGroups
distinguishable.
Also set this id in all internal sources that may produce identical
TrackGroups in certain edge cases.
Issue: google/ExoPlayer#9718
PiperOrigin-RevId: 413430719
Allows a transformation matrix to be input into Transformer,
to apply vertex transformations like cropping, rotation,
and other transformations built into android.graphics.Matrix.
Not building out into a VertexTransformation class yet, as
that class structure wouldn't make sense until we can modify
resolution, per TODOs.
PiperOrigin-RevId: 413384409
This will remove the need to implement compat code handling very old API
versions where some symbols are not available, and it reduces the burden of
dealing with media framework issues around concurrent codec usage that are
worse on older API versions. Top apps that we've surveyed as potential users
for transformer library features are using API 21 or later.
PiperOrigin-RevId: 413341540
Sometimes the empty end of stream buffer has a non-zero
data limit. Calling flip first, resets the limit to the
position which is zero in these cases.
PiperOrigin-RevId: 413156455
The test extracts and decodes the first video frame in the test media, renders it to the frame editor's input surface and then processes data. It then reads back the output from the frame editor, converts it to a bitmap and then compares that with a 'golden' bitmap (which is just the same as the test media's first video frame).
PiperOrigin-RevId: 413131811
*** Original commit ***
Remove usage of @ForOverride.
Fixes the gradle compilation failures.
Gradle dependencies need revising if we want to be using this, as
checkerframework is ahead of their latest version, such that we
can't compile.
***
PiperOrigin-RevId: 412901827
Currently we prefer technical preferences set in the Parameters over
content preferences implied by the media. It proably makes more
sense in the opposite order to avoid the situation where a
non-default track (e.g. commentary) is selected just because it
better matches some technical criteria.
Also add comments explaining the track selection logic stages.
PiperOrigin-RevId: 412840962
This is already called in GlUtil.Program().
Tested by confirming that the demo-gl target still runs as expected.
Refactoring change only. No intended functional changes.
PiperOrigin-RevId: 412308564
And also tweak existing role flag logic to strictly prefer perfect
matches over partial matches.
Caveat: Video role flags only supported for fixed track selections
(same issue as Issue: google/ExoPlayer#9519).
Issue: google/ExoPlayer#9402
PiperOrigin-RevId: 412292835
This allows to check if the media metrics service is available outside
the actual constructor and to fail gracefully if it is missing.
PiperOrigin-RevId: 412232425
- This format is passed to the PassthroughPipeline, which doesn't use
any decoder.
- In most other cases where it is used, it is not relevant that this
format will be or has been passed to the decoder. What's relevant is
that it is the format of the input.
PiperOrigin-RevId: 412093371
We need the filename of the output videos to be predictable, because
MobileHarness requires the exact filename to pull the file.
PiperOrigin-RevId: 412092347
Fixes the gradle compilation failures.
Gradle dependencies need revising if we want to be using this, as
checkerframework is ahead of their latest version, such that we
can't compile.
PiperOrigin-RevId: 412004021
This change moves methods that are the same in
`TransformerAudioRenderer` and `TransformerVideoRenderer` to
`TransformerBaseRenderer`.
PiperOrigin-RevId: 411758928
This inheritance is really confusing because ExoPlayerImpl is not
a full Player interface implementation. It also claims to be an
ExoPlayer implementation in the Javadoc which isn't true in its
current state.
Removing the inheritance also allows to clean up some unused methods.
PiperOrigin-RevId: 411756963
This is documented on the setter already, but it seems to make sense to do this in the constructor as well for clarity.
Issue: google/ExoPlayer#9550
PiperOrigin-RevId: 411675700
Before this change ExpPlayerImplInternal dropped a change of the playing period when a change in the timeline occurred that actually changed the playing period but we don't want to update the period queue. This logic also dropped the update of a skipped server side inserted preroll ad for which we want the periodQueue to 'seek' to the stream position after the preroll ad and trigger a SKIP discontinuity.
This change now introduces an exception so that a skipped SSI ad is still causing an update in the period queue which leads to a 'seek' and a discontinuity of type SKIP.
PiperOrigin-RevId: 411607299
Document that apps should retain `GlUtil.Program` while the program is in use,
and keep a reference to attributes/uniforms within the program to make sure
they don't get GC'd causing any allocated buffers passed to GL to become
invalid.
Tested manually by running gldemo and transformer.
PiperOrigin-RevId: 411516894
The features supported by `TranscodingTransformer` are a
superset of those supported by `Transformer` after merging
the video renderers in <unknown commit>. This change removes
`TranscodingTransformer` and adds its features to `Transformer`.
PiperOrigin-RevId: 411072392
Follow-up to a comment on 6f0f7dd1be: Buffers that are useful to pass
to the sample/passthrough pipeline should either contain data or the
end of input flag. Otherwise, passing these buffers along is unnecessary
and may even cause the decoder to allocate a new input buffer which is
wasteful.
PiperOrigin-RevId: 411060709
The player will not play ads in final states (played, skipped, error)
again. To allow ads loader customizations to play ads again, we can
add a method that resets the state back to available or unavailable
(depending on whether we have the URI for the ad).
Issue: google/ExoPlayer#9615
PiperOrigin-RevId: 411042842
Currently, DrmSessionManager takes player specific values (= the
playback looper) through (pre)acquireSession calls and requires
the caller to pass in the same values every time.
Instead, we can configure the DrmSessionManager for playback with
a player once before it's being used. We can't simply extend the
prepare() method as prepare may be called before the player is
created to prewarm the DrmSessionManager.
The new method also takes a PlayerId which is bound to the lifetime
of the player similar to the playback looper.
To avoid breakage of custom MediaSources with DRM, we can keep the
old the SampleQueue.createWithDrm method as deprecated.
PiperOrigin-RevId: 410998240
The `SefSlowMotionVideoSampleTransformer` drops frames by
setting `buffer.data = null` and updates the timestamps of the
frames it keeps. However, these buffers with dropped frames
are still used in the pipeline as they may contain other useful
information, specifically whether the end of the input has been
reached. So, the timestamps should also be updated for the buffers
where frames are dropped.
PiperOrigin-RevId: 410797678
The local tracks variable was used to assign the initial subtext
for the current track selection in the menu, but the new value
was only assigned after the subtext has been evaluated.
Assign the local variable first, so that the remaining accesses
the latest value.
Issue: google/ExoPlayer#9698
PiperOrigin-RevId: 410750396
We verified there is a race condition in the
AsynchronousMediaCodecAdapter when flushing the adapter
multiple times. The race condition results in calling MediaCodec.start()
and MediaCodec.flush() in parallel and that makes the MediaCodec
raise an exception.
This changes the default behavior to call MediaCodec.start() on the
same thread after MediaCodec.flush() to avoid the race condition.
#minor-release
PiperOrigin-RevId: 410509388
Populate ICY headers into MediaMetadata so that they can
propagate to the app via AnalyticsListener#onMediaMetadataChanged().
This change copies IcyHeaders.name into MediaMetadata.description
and IcyHeaders.genre into MediaMetadata.genre.
Note: MediaItem.metadata maintain their precedence and overwrite any
ICY headers parsed.
Issue: google/ExoPlayer#9677
PiperOrigin-RevId: 410495676
In the near future, we will be able to specify which tests run on this
target explicitly, at which point this ignore will be removed.
PiperOrigin-RevId: 410758785
The local tracks variable was used to assign the initial subtext
for the current track selection in the menu, but the new value
was only assigned after the subtext has been evaluated.
Assign the local variable first, so that the remaining accesses
the latest value.
Issue: google/ExoPlayer#9698
PiperOrigin-RevId: 410750396
The `GlUtil` wrappers for attributes/uniforms allocate buffers that are passed into OpenGL, and it seems that the distorted output was caused by these buffers being garbage collected.
The issue was difficult to reproduce manually. Add a test that does repeated transcodes in a loop (marked `@Ignore` for now because it runs for a long time and requires network access so may be flaky) to make it easier to run many transcodes and look for inconsistent output. For now the consistency check is just based on the file size which is very likely to change if the actual video frames change.
Verified that the test fails before, and passes once the attributes and uniforms are stored in fields as in this CL.
PiperOrigin-RevId: 410581706
This change merges `TransformerMuxingVideoRenderer` and
`TransformerTranscodingVideoRenderer` into `TransformerVideoRenderer`.
Besides all features supported by `TransformerTranscodingVideoRenderer`
the new merged `TransformerVideoRenderer` also supports SEF slow motion
flatting without re-encoding like the `TransformerMuxingVideoRenderer`.
To do this, it uses a `SefSlowMotionVideoSampleTransformer` with
the `PassthroughPipeline`.
PiperOrigin-RevId: 410531478
This mime type is technically for the Muxer, and determines
the container used. In the context of the transformer, this can
be thought of more as a container mime type, to avoid confusion
with the video mime type and audio mime type.
Deprecates setOutputMimeType().
PiperOrigin-RevId: 410530707
Issue: google/ExoPlayer#9697
Before, the `MAX_SEQUENCE_NUMBER` is 65535, such that the logic to get the next
sequence number:
`previousSeqNumber + 1 % MAX_SEQUENCE_NUMBER`
yields 0 when `previousSeqNumber` is 65534. However, the next sequence number
should be 65535.
PiperOrigin-RevId: 410530098
We verified there is a race condition in the
AsynchronousMediaCodecAdapter when flushing the adapter
multiple times. The race condition results in calling MediaCodec.start()
and MediaCodec.flush() in parallel and that makes the MediaCodec
raise an exception.
This changes the default behavior to call MediaCodec.start() on the
same thread after MediaCodec.flush() to avoid the race condition.
#minor-release
PiperOrigin-RevId: 410509388
Populate ICY headers into MediaMetadata so that they can
propagate to the app via AnalyticsListener#onMediaMetadataChanged().
This change copies IcyHeaders.name into MediaMetadata.description
and IcyHeaders.genre into MediaMetadata.genre.
Note: MediaItem.metadata maintain their precedence and overwrite any
ICY headers parsed.
Issue: google/ExoPlayer#9677
#minor-release
PiperOrigin-RevId: 410495676
When selecting an explicit track or "Auto", we need to remove any
existing track type disabling. Otherwise the track override won't work.
Issue: google/ExoPlayer#9692
PiperOrigin-RevId: 410250313
When selecting an explicit track or "Auto", we need to remove any
existing track type disabling. Otherwise the track override won't work.
Issue: google/ExoPlayer#9692
PiperOrigin-RevId: 410250313
Simple, initial implementation to allow setResolution()
to set the output height, for downscaling/upscaling.
Per TODOs, follow-up CLs may change layering, add UI,
or allow querying decoders for more resolution options.
PiperOrigin-RevId: 410203343
We already parse essential and supplemental properties from the
Representation, but don't add them to our Representation class so that
they can be accessed by users.
Issue: google/ExoPlayer#9579
PiperOrigin-RevId: 409961990
The main point of the IDLE state is that the player is not holding
resources. Clarify this in the documentation of STATE_IDLE, prepare and
stop.
PiperOrigin-RevId: 409950785
We already parse essential and supplemental properties from the
Representation, but don't add them to our Representation class so that
they can be accessed by users.
Issue: google/ExoPlayer#9579
PiperOrigin-RevId: 409961990
The main point of the IDLE state is that the player is not holding
resources. Clarify this in the documentation of STATE_IDLE, prepare and
stop.
PiperOrigin-RevId: 409950785
The decoder writes to `OpenGlFrameEditor`'s input `Surface`
and the `OpenGlFrameEditor` writes to the encoder's input `Surface`.
PiperOrigin-RevId: 409931796
If the number of samples changes, the sizes will help us to verify whether they are just split differently or extra data was added.
PiperOrigin-RevId: 407346280
Currently, TrackSelectionOverrides are documented as being applied
per track type, meaning that one override for a type disables all
other selections for the same track type. However, the actual
implementation only applies it per track group, relying on the
track selector to never select another renderer of the same type.
This change fixes DefaultTrackSelector to fully adhere to the
TrackSelectionsOverride definition. This solves problems when
overriding tracks for extension renderers (see Issue: google/ExoPlayer#9675)
and also simplifies a workaround added to StyledPlayerView.
#minor-release
PiperOrigin-RevId: 409121711
The asynchronous MediaCodec adapter queues input buffers in a
background thread. If a codec queueuing operation throws an exception,
the buffer enqueuer will store it as a pending exception and re-throw it
the next time the adapter will attempt to queue another input buffer.
The buffer enqueuer's flush() and shutdown() may throw an exception if
the pending error is set. This is subject to a race-condition in which
the pending error can be set while the adapter is flushing/shutting down
the enqueuer, e.g., if an input buffer is still being queued and the
codec throws an exception. As a result, the adapter cannot flush or
shutdown gracefully.
This change makes the buffer enqueuer to ignore any pending error
when flushing/shuttinf down so that the adapter can flush/release
gracefully even if a queueing error was detected.
PiperOrigin-RevId: 409113054
When operating the MediaCodec in asynchronous mode, after a
MediaCodec.flush(), we start MediaCodec in the callback thread,
which might trigger errors in some platforms. This change adds an
experimental flag to move the call to MediaCodec.start() back to the
playback thread.
PiperOrigin-RevId: 407801013
Add protected method DefaultRenderersFactory.getCodecAdapter(), so that
subclasses of DefaultRenderersFactory that override
buildVideoRenderers() or buildAudioRenderers() can access the
DefaultRenderersFactory codec adapter factory and pass it to
MediaCodecRenderer instances they may create.
PiperOrigin-RevId: 407345431
This method is helpful when iterating the list of track overrides
to figure out which type the override applies to.
Issue: google/ExoPlayer#9665
PiperOrigin-RevId: 409108977
The Javadoc of DefaultTrackSelector can be shortened as it's not the
right place to document detailed options of the Player track selection
parameters.
The documentation page about track selection is updated to the new
APIs and extended with most relevant options and information needed
to work with ExoPlayer's track selection API.
#minor-release
PiperOrigin-RevId: 409088989
Robolectric uses the JRE HttpURLConnection [1], while real Android
devices and emulators use OkHttp to implement HttpURLConnection. This
can lead to important differences in behaviour, so it's better to use
instrumentation tests when specific HTTP behaviour is important.
[1] https://github.com/robolectric/robolectric/issues/6769#issuecomment-943556156
PiperOrigin-RevId: 408840295
The setters in the Builder are already deprecated and using the
old getter is error-prone as they only return the overrides set
with the deprecated setters.
Issue: google/ExoPlayer#9665
PiperOrigin-RevId: 408817640
Currently, TrackSelectionOverrides are documented as being applied
per track type, meaning that one override for a type disables all
other selections for the same track type. However, the actual
implementation only applies it per track group, relying on the
track selector to never select another renderer of the same type.
This change fixes DefaultTrackSelector to fully adhere to the
TrackSelectionsOverride definition. This solves problems when
overriding tracks for extension renderers (see Issue: google/ExoPlayer#9675)
and also simplifies a workaround added to StyledPlayerView.
#minor-release
PiperOrigin-RevId: 409121711
The asynchronous MediaCodec adapter queues input buffers in a
background thread. If a codec queueuing operation throws an exception,
the buffer enqueuer will store it as a pending exception and re-throw it
the next time the adapter will attempt to queue another input buffer.
The buffer enqueuer's flush() and shutdown() may throw an exception if
the pending error is set. This is subject to a race-condition in which
the pending error can be set while the adapter is flushing/shutting down
the enqueuer, e.g., if an input buffer is still being queued and the
codec throws an exception. As a result, the adapter cannot flush or
shutdown gracefully.
This change makes the buffer enqueuer to ignore any pending error
when flushing/shuttinf down so that the adapter can flush/release
gracefully even if a queueing error was detected.
PiperOrigin-RevId: 409113054
This method is helpful when iterating the list of track overrides
to figure out which type the override applies to.
Issue: google/ExoPlayer#9665
PiperOrigin-RevId: 409108977
The Javadoc of DefaultTrackSelector can be shortened as it's not the
right place to document detailed options of the Player track selection
parameters.
The documentation page about track selection is updated to the new
APIs and extended with most relevant options and information needed
to work with ExoPlayer's track selection API.
#minor-release
PiperOrigin-RevId: 409088989
MediaSource can be reused with other Player instances after they
have been released, so we need to set the PlayerId when preparing
the source. Access can mostly be handled by the implementation in
BaseMediaSource.
PiperOrigin-RevId: 408878824
Robolectric uses the JRE HttpURLConnection [1], while real Android
devices and emulators use OkHttp to implement HttpURLConnection. This
can lead to important differences in behaviour, so it's better to use
instrumentation tests when specific HTTP behaviour is important.
[1] https://github.com/robolectric/robolectric/issues/6769#issuecomment-943556156
PiperOrigin-RevId: 408840295
The setters in the Builder are already deprecated and using the
old getter is error-prone as they only return the overrides set
with the deprecated setters.
Issue: google/ExoPlayer#9665
PiperOrigin-RevId: 408817640
The `VideoSamplePipeline` handles all steps from decoding to
re-encoding that where previously in
`TransformerTranscodingVideoRenderer`. The renderer is now only
responsible for reading the format, reading input, passing it to the
pipeline and passing the pipeline's output to the muxer.
When no transformations are needed, decoding and re-encoding is
skipped using the `PassthroughPipeline`.
PiperOrigin-RevId: 408619407
We can rename the existing setIndex method to a more generic init
as this method is only called by EPII and implemented by BaseRenderer
anyway.
PiperOrigin-RevId: 408616055
When dropping the remainder, the decoder and encoder timestamps start diverging after a few buffers when no speed changes are supposed to occur. Tracking the remainder keeps them in sync.
PiperOrigin-RevId: 408341074
The platform class is only available from API 31, so we need
a generic wrapper that can be used on all API levels. The wrapper
essentially provides an identifier for a player instance, so naming
it accordingly.
PiperOrigin-RevId: 408292802
And in a couple of related places.
This is for consistency with the rest of the codebase where
we exclusively use indices.
#minor-release
PiperOrigin-RevId: 408273372
When we have multiple overrides for TrackGroups associated with
one renderer, we need to look at all of them to find the non-empty
one. Empty ones should only be used to remove previously selected
tracks for this group and otherwise be ignored.
Currently this is broken because the first override (no matter if
it's empty or not) is used as the final selection for this renderer.
Issue: google/ExoPlayer#9649
PiperOrigin-RevId: 407792330
And in a couple of related places.
This is for consistency with the rest of the codebase where
we exclusively use indices.
#minor-release
PiperOrigin-RevId: 408273372
The comment "all should be same" is not correct, it is extremely likely they will be the same but not assured. In either case the seek position will work, it just may not land exactly on a sync point in every variant.
When operating the MediaCodec in asynchronous mode, after a
MediaCodec.flush(), we start MediaCodec in the callback thread,
which might trigger errors in some platforms. This change adds an
experimental flag to move the call to MediaCodec.start() back to the
playback thread.
PiperOrigin-RevId: 407801013
When we have multiple overrides for TrackGroups associated with
one renderer, we need to look at all of them to find the non-empty
one. Empty ones should only be used to remove previously selected
tracks for this group and otherwise be ignored.
Currently this is broken because the first override (no matter if
it's empty or not) is used as the final selection for this renderer.
Issue: google/ExoPlayer#9649
#minor-release
PiperOrigin-RevId: 407792330
* Remove GlUtil.Program String[] constructor to unify and just use the
String constructor.
* Add getAttributeArrayLocationAndEnable() to simplify things a tiny bit.
* Increase usage of constant values.
PiperOrigin-RevId: 407570340
`TransformerAudioRenderer` reads input and passes `DecoderInputBuffer`s to the `AudioSamplePipeline`. The `AudioSamplePipeline` handles all steps from decoding to encoding. `TransformerAudioRenderer` receives `DecoderInputBuffer`s from the `AudioSamplePipeline` and passes their data to the muxer.
`AudioSamplePipeline` implements a new interface `SamplePipeline`. A pass-through pipeline will be added in a future cl.
PiperOrigin-RevId: 407555102
If the number of samples changes, the sizes will help us to verify whether they are just split differently or extra data was added.
PiperOrigin-RevId: 407346280
Add protected method DefaultRenderersFactory.getCodecAdapter(), so that
subclasses of DefaultRenderersFactory that override
buildVideoRenderers() or buildAudioRenderers() can access the
DefaultRenderersFactory codec adapter factory and pass it to
MediaCodecRenderer instances they may create.
#minor-release
PiperOrigin-RevId: 407345431
Where this introduced an inconsistency (e.g. assigning to something
called `windowIndex`), I generally renamed the transitive closure of
identifiers to maintain consistency (meaning this change is quite
large). The exception is code that interacts with Timeline and Window
directly, where sometimes I kept the 'window' nomenclature.
#minor-release
PiperOrigin-RevId: 407040052
Where this introduced an inconsistency (e.g. assigning to something
called `windowIndex`), I generally renamed the transitive closure of
identifiers to maintain consistency (meaning this change is quite
large). The exception is code that interacts with Timeline and Window
directly, where sometimes I kept the 'window' nomenclature.
#minor-release
PiperOrigin-RevId: 407040052
The video scaling mode and stream type defines a default constant
that needs to be added to the IntDef definition to be assignable.
PiperOrigin-RevId: 406835696
The return values of AudioManager.getPlaybackOffloadSupport are the same as the values defined in C.AudioManagerOffloadMode.
PiperOrigin-RevId: 406817413
The presentation time in fMP4 is calculated by adding and subtracting
3 values. All 3 values are currently converted to microseconds first
before the calculation, leading to rounding errors. The rounding errors
can be avoided by doing the conversion to microseconds as the last step.
For example:
In timescale 96000: 8008+8008-16016 = 0
Rounding to us first: 83416+83416-166833=-1
#minor-release
PiperOrigin-RevId: 406809844
Currently, clipping errors are never thrown if we already have a
MediaPeriod. This may happen for example for ProgressiveMediaSource
where we need to create a MediaPeriod before knowing whether clipping
is supported. Playback will still fail, but with unrelated assertion
errors that are hard to understand for users.
Fix this by setting the pending error on the ClippingMediaPeriod.
#minor-release
Issue: Issue: google/ExoPlayer#9580
PiperOrigin-RevId: 406809737
These IntDefs are now annotated with TYPE_USE [1], so they can be moved
to directly before the type (int).
[1] Since <unknown commit>
PiperOrigin-RevId: 406803555
This allows the use of the intdef in parameterized types,
e.g. List<@MyIntDef Integer>
For IntDefs that are already released in ExoPlayer 2.15.1 we add
TYPE_USE in addition to all other reasonable targets, to maintain
backwards compatibility with Kotlin code (where an incorrectly
positioned annotation is a compilation failure). 'reasonable targets'
includes FIELD, METHOD, PARAMETER and LOCAL_VARIABLE but not TYPE,
CONSTRUCTOR, ANNOTATION_TYPE, PACKAGE or MODULE. TYPE_PARAMETER is
implied by TYPE_USE.
For not-yet-released IntDefs we just add TYPE_USE.
#minor-release
PiperOrigin-RevId: 406793413
This helps to prevent issues where decoders can't handle negative
timestamps. In particular it avoids issues when the media accidentally
or intentionally starts with small negative timestamps. But it also
helps to prevent other renderer resets at a later point, for example
if a live stream with a large start offset is enqueued in the playlist.
#minor-release
PiperOrigin-RevId: 406786977
The video scaling mode and stream type defines a default constant
that needs to be added to the IntDef definition to be assignable.
PiperOrigin-RevId: 406835696
The return values of AudioManager.getPlaybackOffloadSupport are the same as the values defined in C.AudioManagerOffloadMode.
PiperOrigin-RevId: 406817413
The presentation time in fMP4 is calculated by adding and subtracting
3 values. All 3 values are currently converted to microseconds first
before the calculation, leading to rounding errors. The rounding errors
can be avoided by doing the conversion to microseconds as the last step.
For example:
In timescale 96000: 8008+8008-16016 = 0
Rounding to us first: 83416+83416-166833=-1
#minor-release
PiperOrigin-RevId: 406809844
Currently, clipping errors are never thrown if we already have a
MediaPeriod. This may happen for example for ProgressiveMediaSource
where we need to create a MediaPeriod before knowing whether clipping
is supported. Playback will still fail, but with unrelated assertion
errors that are hard to understand for users.
Fix this by setting the pending error on the ClippingMediaPeriod.
#minor-release
Issue: Issue: google/ExoPlayer#9580
PiperOrigin-RevId: 406809737
These IntDefs are now annotated with TYPE_USE [1], so they can be moved
to directly before the type (int).
[1] Since <unknown commit>
PiperOrigin-RevId: 406803555
This allows the use of the intdef in parameterized types,
e.g. List<@MyIntDef Integer>
For IntDefs that are already released in ExoPlayer 2.15.1 we add
TYPE_USE in addition to all other reasonable targets, to maintain
backwards compatibility with Kotlin code (where an incorrectly
positioned annotation is a compilation failure). 'reasonable targets'
includes FIELD, METHOD, PARAMETER and LOCAL_VARIABLE but not TYPE,
CONSTRUCTOR, ANNOTATION_TYPE, PACKAGE or MODULE. TYPE_PARAMETER is
implied by TYPE_USE.
For not-yet-released IntDefs we just add TYPE_USE.
#minor-release
PiperOrigin-RevId: 406793413
This helps to prevent issues where decoders can't handle negative
timestamps. In particular it avoids issues when the media accidentally
or intentionally starts with small negative timestamps. But it also
helps to prevent other renderer resets at a later point, for example
if a live stream with a large start offset is enqueued in the playlist.
#minor-release
PiperOrigin-RevId: 406786977
Initialize default components lazily in ExoPlayer.Builder to avoid
redundant component instantiations, useful in cases where apps
overwrite default components with ExoPlayer.Builder setters.
The fields in ExoPlayer.Builder are wrapped in a Supplier (rather than
just making then nullable and initializing them in
ExoPlayer.Builder.build()) so that we maintain the proguarding
properties of this class. The exception is
ExoPlayer.Builder.AnalyticsCollector which became nullable and is
initialized in ExoPlayer.Builder.build() in order to use any Clock
that has been set separately with ExoPlayer.Builder.setClock().
#minor-release
PiperOrigin-RevId: 406345976
This makes sure that #EXT-X-RENDITION-REPORT tags can be placed before the list of segments/parts as well. We were previously assuming that these come at the end, which naturally would make sense and is done like this in all examples, but it is not explicitly defined by the spec.
Issue: google/ExoPlayer#9592
PiperOrigin-RevId: 406329684
Only deprecated references remain.
Usages of the deprecated methods will be migrated in a follow-up change.
#minor-release
PiperOrigin-RevId: 405927141
Also add a setRenderersFactory() method, so that all constructor-provided
components can also be passed via setters.
This comment already appears on the constructor that takes all
components, but it applies to these ones as well.
PiperOrigin-RevId: 405917343
`checkNotNull` should be avoided where possible.
This change adds `@EnsuresNonNull` or `@EnsuresNonNullIf` to configuration methods for fields they initialize.
`checkNotNull` is now avoided for the `@MonotonicNonNull` formats by adding `@RequiresNonNull` annotations.
`checkNotNull` is now avoided for the encoder and decoder in `feedMuxerFromEncoder()`, `feedEncoderFromDecoder()`, `feedDecoderFromInput()`, etc. by creating local variables for `encoder` and `decoder` in `render` after the configuration method calls and passing these as non-null parameters.
PiperOrigin-RevId: 405893824
Our package-info.java files are annotated with @NonNullApi which results
in everything being non-null by default, so this annotation is never
needed.
#minor-release
PiperOrigin-RevId: 405864737
Test file produced with:
$ MP4Box -add "sample.mp4#video:colr=nclc,1,1,1" -new sample_18byte_nclx_colr.mp4
And then manually changing the `nclc` bytes to `nclx`.
This produces an 18-byte `colr` box with type `nclx`. The bitstream of
this file does not contain HDR content, so the file itself is invalid
for playback with a real decoder, but adding the box is enough to test
the extractor change in this commit.
(aside: MP4Box will let you pass `nclx`, but it requires 4 parameters, i.e. it
requires the full_range_flag to be set, resulting in a valid 19-byte colr box)
#minor-release
Issue: #9332
PiperOrigin-RevId: 405842520
- This CL does not introduce functional changes.
- This change will allow searching for the clli box while
parsing the mdcv box in order to construct the HDR
static info contained in ColorInfo.
#minor-release
PiperOrigin-RevId: 405656499
Also check that the output video MIME type is supported with the given container MIME type in `TranscodingTransformer` and `TransformerBaseRenderer`.
PiperOrigin-RevId: 405645362
This has a few benefits:
* Aligns the Builder constructors with the setters
(setRenderersFactory is missing, but can be easily added in a
follow-up change).
* Allows DefaultMediaSourceFactory to be stripped by R8 and
makes the shrinking dev guide for the cases of providing a custom
MediaSourceFactory or directly instantiating MediaSource instances
less weird too.
#minor-release
PiperOrigin-RevId: 405632981
When no encoder video MIME type is specified, the `TransformerTranscodingVideoRenderer` now uses the video MIME type of the input for the encoder format.
The input format is now read in a new method `ensureInputFormatRead` which is called before the other configuration methods. This removes the logic for reading the input format from `ensureDecoderConfigured`, because it is now needed for both encoder and decoder configuration but the encoder needs to be configured before GL and GL needs to be configured before the decoder, so the decoder can't read the format.
The width and height are now inferred from the input and the frame rate and bit rate are still hard-coded but set by the `MediaCodecAdapterWrapper` instead of `TranscodingTransformer`.
PiperOrigin-RevId: 405631263
The static and dynamic metadata now build up in a list, such that when
the MediaMetadata is built, they are applied in an event order. This
means that newer/fresher values will overwrite older ones. The MediaItem
values are then applied at the end, as they take priority over any other.
#minor-release
PiperOrigin-RevId: 405383177
This introduces a new option `setAudioMimeType` in `TranscodingTransformer.Builder` and a corresponding check whether the selected type is supported. This check is done using `supportsSampleMimeType` which is now part of the `Muxer.Factory` and `MuxerWrapper` rather than `Muxer`.
A new field `audioMimeType` is added to `Transformation` and the `TransformerAudioRenderer` uses this instead of the input MIME type if requested.
PiperOrigin-RevId: 405367817
Decoded video frames can be large and there is no need to retrieve the
corresponding ByteBuffer as we render the decoded frames on a surface
for better performance.
PiperOrigin-RevId: 405364950
The current API exposes an `ImmutableMap` of
`TrackGroup` -> `TrackSelectionOverride`.
This has several disadvantages:
- A difficult to use API for mutation
(`ImmutableMap.Builder` doesn't support key removal).
- There is no track selection specific methods,
how the generic map API mapps to the selection override is not complex
but to obvious for a casual reader.
- The internal data type is exposed, making internal refactor difficult.
This was done to have the API ready as quick as possible.
When transitioning the clients to the map API in <unknown commit>,
it became clear that the map API was too verbose and not mapping
to the clients needs, so utility methods
were added to make operations clearer and more concise.
Nevertheless, having to use utility method to use easily and correctly
an API is not the sign of a good API.
This cl refactors the track selection API for several improvements:
- Add a type `TrackSelectionParameters` that encapsulate the internal
data structure (map currently).
- For iteration, expose as a list.
- Add a `Builder` for easy mutable operations.
- Add track selection specific methods to avoid having utilities functions.
- Those operations are the same as `DefaultTrackSelector.Parameters`
for easier migration. (`setOverride` was renamed to `addOverride`)
- Move `TrackSelection` classes outside of `TrackSelectionParameters`
as their own top level classes.
The migration of the client code is straightforward as most of it
were already using the previously mentioned utility functions
that are now native methods.
The full migration has not been done yet, and is pending on this cl approval.
PiperOrigin-RevId: 405362719
* @Reason is not a TYPE_USE annotation, so should appear before any modifiers and after Javadocs.
(see go/java-style#s4.8.5-annotations)
* Curly braces should be used for inline Javadoc tags: {@code ...}
(see http://go/bugpattern/InvalidInlineTag)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if the change looks generally problematic.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
PiperOrigin-RevId: 404769260
