The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
ISO ISO14496-3 allows setting of an arbitrary audio sampling frequency in compliant streams.
When samplingFrequencyIndex is set to 0xf (escape value) we expect no less than 24 bits
to read sampling informtion from (See section 1.6.2.1)
`availableFrameCount` tracks the number of frames that is avilable on the
`SurfaceTexture`, but haven't been used (by `updateTexImage()`) yet. Thus
semantically this counter should only be decremented after calling
`updateTexImage()`, not before it.
Also reworded `getPendingFrameCount()` javadoc, "external texture" is an
internal state that is not publicised anywhere.
PiperOrigin-RevId: 488765174
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
AssetLoader will have multiple implementations and be customizable. We
want to remove the responsibility of computing the progress from this
class and centralize the logic in TransformerInternal.
PiperOrigin-RevId: 488608890
Added new method to check if codec just functionally supports a format. Changed getDecoderInfosSortedByFormatSupport to use new function to order by functional support. This allows decoders that only support functionally and are more preferred by the MediaCodecSelector to keep their preferred position in the sorted list.
UnitTests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an effect on sort of the decoder list, it is only based on functional support
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
It's not clear to me why presubmit didn't catch this, I briefly
investigated but couldn't work it out - so I'm just going to fix
it and move on.
#minor-release
PiperOrigin-RevId: 487497827
This makes two fixes:
1. Remove `HlsSampleStreamWrapper.Callback` (package-private) from the
list of interfaces implemented by `HlsMediaPeriod` (`public`) and
move the implementation to a private inner class instead. This avoids
Metalava complaining about a public class that inherits from a
package-private type.
2. Reduce the visibility of
`RtpPayloadFormat.isFormatSupported(MediaDescription)` from `public`
to package-private. The `MediaDescription` type is already
package-private, so this method was already unusable outside the
package.
#minor-release
PiperOrigin-RevId: 487472781
This makes two types of fix:
1. Align parameter names on overridden methods where the superclass
has `@param` javadoc.
2. Use `@hide` on `protected final` methods that refer to package-private
types. This will hide these symbols from Dackka javadoc generation
but not (currently) from the artefacts distributed on Maven. These
methods are currently unusable outside their package anyway (e.g. by
external developers) because of the dependency on a package-private
type.
This also changes some HLS, SmoothStreaming, and IMA code where I've renamed
parameters of overridden methods to be consistent across the type
hierarchy.
#minor-release
PiperOrigin-RevId: 487472665
Not setting the color info results in a missing "colr" box in the produced
container, under file/moov/trak/mdia/minf/stbl/stsd/hvc1. This means extractors
will not be able to find out the transcoded file is HDR.
In `Transformer`, this means it can't transcode this transcoded file, because
it currently relies on the container bearing HDR info to construct the
transcoding sample pipeline.
PiperOrigin-RevId: 487276712
In startTransformation method we were throwing UnsupportedEncodingException (IOException) when mediaItem with unsupported arguments is passed.
Changed this to IllegalArgumentException which seems more logical here.
PiperOrigin-RevId: 487259296
This logic is currently in the player renderers. With multi-asset, the
renderers will go into the AssetLoader, which shouldn't be responsible
for muxing.
PiperOrigin-RevId: 486860502
Problem: We are initialising muxer as soon as we start the transformation. Now the startTransformation() method can be called from main thread, but muxer creation is an I/O operation and should be not be done on main thread.
Solution: Added lazy initialisation of muxer object. The actual transformation happens on background thread so the muxer will be initialised lazily from background thread only.
Another way was to provide an initialize() method on MuxerWrapper which will explicitly initialise muxer object but with this approach the caller need to call the initialise method before calling anything else. With current implementation the renderers are calling MuxerWrapper methods on various callbacks (Not sequentially) and also we are sharing same muxer with multiple renderers so It might become confusing for the caller on when to call the initialise() method. Also there are few methods on MuxerWrapper which dont really need muxer object. So in short it might make MuxerWrapper APIs more confusing.
Validation: Verified the transformation from demo app.
PiperOrigin-RevId: 486735787
This should be necessary to ensure decoders see fewer errors.
Setting this resulted in removing native_dequeueOutputBuffer errors on OMX.MTK decoders for in-app tone mapping prototyping.
PiperOrigin-RevId: 486715941
If there's an @param javadoc tag in a supertype then all overrides
of this method that don't also override the javadoc must use the same
parameter name.
PiperOrigin-RevId: 485857711
Public methods may only refer to public types in their signature. This
change ensures that by switching to a public supertype everywhere.
PiperOrigin-RevId: 485568625
This change makes adding ad events in live streams more robust by allowing ad
groups to grow in number of ads if more ad events are received than initially
announced by the SDK.
With the IMA prefetch feature, an AdPod can grow in size in certain conditions
like from initially 2 ads to 4 ads being part of the ad group. With this change,
if an additional ad event arrives while the ad group is still being played,
the ad group is expanded. If the event arrives late and the ad group is already
completed, a new group is created for the remaining ads.
This also covers the case where we join the live stream while an ad is being
played and we missed at least one LOADED event from the SDK. Ads of the group
before the first LOADED event are ignored in such a case.
PiperOrigin-RevId: 484214760
From ANSI-CTA-608-E R-2014 section 8.4:
> When closed captioning is used on line 21, field 2, it shall conform
> to all of the applicable specifications and recommended practices as
> defined for field 1 services with the following differences:
> 1. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x14, 0x20 to 0x14, 0x2F in field 1,
> shall be replaced with 0x15, 0x20 to 0x15, 0x2F when used in field
> 2.
> 2. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x1C, 0x20 to 0x1C, 0x2F in field
> 1, shall be replaced with 0x1D, 0x20 to 0x1D, 0x2F when used in
> field 2.
This basically means that `cc1=0x15` in field 2 should be interpreted as
`cc1=0x14` in field 1, and same for `0x1D -> 0x1C`.
The `isMiscCode` method above already handles this by ignoring the LSB
(the only difference between `0x14` and `0x15`, and `0x1C` and `0x1D`)
by AND-ing with `0xF6` instead of `0xF7`. This change uses the same
trick in `isServiceSwitchCommand`.
Issue: google/ExoPlayer#10666
#minor-release
PiperOrigin-RevId: 483927506
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
This is a no-op, but it's more 'correct' because it avoids any potential
sign mix-ups that come from storing an unsigned byte (with a
potentially set MSB) in a signed java byte variable.
PiperOrigin-RevId: 483409798
Although it can be useful to check the output format, it's not required or needed.
For some AudioProcessor implementations, it is stated/obvious that
the output format will match the input, in which case there is no
a need to check the return value.
#cleanup
PiperOrigin-RevId: 483403679
Make it easier to support use of RGBA_101012 rather than RGBA_8888 for EGL
contexts, displays, and surfaces.
This tangentially supports adding HDR tests, by slightly simplifying the color
selection logic we'd have to add in HDR tests.
PiperOrigin-RevId: 482219428
The reason for making the Muxer public is that we want to add an option
to disable or configure the timer that will throw when the muxer doesn't
receive any data for a given period of time.
PiperOrigin-RevId: 482199360
This was originally added in 4fd7d777b6, but it hasn't done anything
since 98ee159df1 (when the instanceof ExoPlayer check was removed).
PiperOrigin-RevId: 482161662
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
- The naming DefaultMuxer is more consistent with the rest of
Transformer codebase (e.g. DefaultEncoderFactory).
- By hiding the implementation details of DefaultMuxer, the transition
to in-app Muxer will be seamless for apps using DefaultMuxer.
- The current plan is that DefaultMuxer will become the in-app muxer.
PiperOrigin-RevId: 481838790
We already have logic to end all session except the current one if the
current one doesn't have a MediaPeriodId yet. This is assuming that this
only happens after a seek on the app side where the player doesn't have
detailled knowledge about the MediaPeriodIds yet.
Currently this logic isn't triggered if the window we are coming from
doesn't have its MediaPeriodId either as we run into another check that
keeps sessions around until we have a valid windowSequenceNumber.
Swapping both conditions fixes this case without breaking any of the
other known transition scenarios.
Issue: androidx/media#180
PiperOrigin-RevId: 480866465
When debugging and fixing Issue: google/ExoPlayer#10666 I wanted to write a regression
test, but needed to add a test first... This is just a small bit of
coverage to start with. It checks the field/channel filtering works
correctly, but doesn't check any styling info. It also doesn't test
'pop on' subtitles (i.e. when the subtitle isn't shown until a 'end of
subtitle' signal is received).
PiperOrigin-RevId: 480644568
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
A follow up to stopping speaker playback with a Player decorator from
https://github.com/androidx/media/issues/15.
It looks like we will need to change to using playback suppression to avoid
errors like https://github.com/androidx/media/issues/167, when we don't start
a foreground service.
We may not have this implemented by 1.0, but would like it in the API and it seems to be appropriate.
PiperOrigin-RevId: 478835686
