This change introduces two new types of method to `SubtitleParser`:
1. `parse()` methods that take a `Consumer<CuesWithTiming>` and return `void`
2. `parseToLegacySubtitle` method that returns `Subtitle`
(1) ensures that in the new 'parse before SampleQueue' world we can
write cues to the `SampleQueue` as soon as they're ready - this is
especially important when parsing monolithic text files, e.g. for a
whole movie.
(2) ensures that during the transition, the legacy 'parse after
SampleQueue' behaviour doesn't see any regressions in 'time to first
cue being shown'. Previously we had a single implementation to convert
from `List<CuesWithTiming>` to `Subtitle`, but this relies on the
complete list of cues being available, which can take a long time for
large files in some formats (with ExoPlayer's current parsing logic).
By allowing implementations to customise the way they create a
`Subtitle`, we can directly re-use the existing logic, so that the
'time to first cue being shown' should stay the same.
This change migrates all **usages** to the new methods, but doesn't
migrate any **implementations**. I will migrate the implementations in
follow-up CLs before deleting the old list-returning `parse()` methods.
PiperOrigin-RevId: 565057945
Previously any `CuesWithTiming.durationUs` could be `TIME_UNSET`,
meaning it should be replaced by the next `CuesWithTiming` instance
(instead of being merged if the durations overlap, which is currently
the expected behavior for all `CuesWithTiming` with a 'real' duration).
This technically allowed a single subtitle track to include a mixture of
`CuesWithTiming` that should be merged, and some that should be
replaced. This is not actually needed for any of the subtitle formats
currently supported by ExoPlayer - in all cases a format expects either
all cues to be merged, or each cue to replace the previous one.
Supporting this mixture of merging and replacing in `TextRenderer` ended
up being very complicated, and it seemed a bit pointless since it's not
actually needed. This change means a given subtitle track either merges
**all** cues (meaning `CuesWithTiming.durationUs = C.TIME_UNSET` is not
allowed), or **every** cue is replaced by the next one (meaning
`CuesWithTiming.durationUs` may be set (to allow for cues to 'time out',
needed for CEA-608), or may be `TIME_UNSET`).
This value will be used in a subsequent change that adds cue-merging
support to `TextRenderer`.
PiperOrigin-RevId: 565028066
This is equivalent to the existing `scaleLargeTimestamp` method with the
following changes/improvements:
* No longer specific to timestamps (there was nothing inherently
time-specific about the logic in `scaleLargeTimestamp`, but the name
and docs suggested it shouldn't be used for non-timestamp use-cases).
* Additional 'perfect division' checks between `value` and `divisor`.
* The caller can now provide a `RoundingMode`.
* Robust against `multiplier == 0`.
* Some extra branches before falling through to (potentially lossy)
floating-point math, including trying to simplify the fraction with
greatest common divisor to reduce the chance of overflowing `long`.
This was discussed during review of 6e91f0d4c5
This change also includes some golden test file updates - these
represent a bug fix where floating-point maths had previously resulted
in a timestamp being incorrectly rounded down to the previous
microsecond. These changes are due to the 'some more branches' mentioned
above.
PiperOrigin-RevId: 564760748
Instead of invoking "undefined behavior" may occur when a class is used
incorrectly, which is clear but not very helpful to callers, specify what Apps
or users of a class should do when issues occur.
Apply this to Compositor as well, where this otherwise might seem unclear.
PiperOrigin-RevId: 563406219
This wasn't properly documented yet (unlike the longer setMediaItems
method that already includes this documentation).
Issue: androidx/media#607
PiperOrigin-RevId: 561910073
This will help with debugging subtitle sync issues as it will show up in
track selection details emitted to logcat by `EventLogger`.
PiperOrigin-RevId: 561355836
Also use `@linkplain` in more places: If I was already touching a javadoc
block, I switched to `@linkplain` throughout the whole block.
PiperOrigin-RevId: 561320273
The first call to method `registerInputStream` doesn't block.
Later successive calls to the method blocks until the previous register call
finishes.
PiperOrigin-RevId: 559694490
Replace Queue<Long> with LongArrayQueue which provides queue semantics
for long primitives. LongArrayQueue is forked from IntArrayQueue which
in turn was forked from Androidx CircularIntArray.
IntArrayQueue is deleted and we now use CircularIntArray directly from
Androidx Collection.
PiperOrigin-RevId: 559129744
It was moved there temporarily to support another temporary move
of ExoPlaybackException. See <unknown commit>.
Since then, ExoPlaybackException has been moved back to ExoPlayer
and we can do the same with MediaPeriodId, which only makes sense
in the context of the ExoPlayer module.
PiperOrigin-RevId: 557159381
This changes the default logic of shouldShowPlayButton to show a play
button while the playback is temporarily suppressed. This helps to
provide better UI feedback to the fact that playback stopped and
provides a quick way for users to override the suppression and attempt
to restart playback.
Some apps may want to keep the legacy behavior depending on their app's
needs. Hence, we also add a config parameter to set this behavior both
in MediaSession and our default UI components.
Issue: google/ExoPlayer#11213
PiperOrigin-RevId: 557129171
This is leftover from the fact that these constants were used
for ExoPlayer renderers only initially, but are now more generally
used to indicate format playback support.
PiperOrigin-RevId: 555951001
`asReadOnlyBuffer` doesn't copy the original byte order but always sets it to big-endian. Replace calls to it with a utility method that manually sets the byte order after creating the read-only copy.
This fixes `TeeAudioProcessor` providing a `ByteBuffer` always in big-endian and hence causing `AudioBufferSink` to read wrong data.
PiperOrigin-RevId: 554861402
This fixes a bug with playing very short audio files, introduced by
fe710871aa
The existing code using floor integer division results in playback never
transitioning to `STATE_ENDED` because at the end of playback for the
short sample clip provided `currentPositionUs=189937`,
`outputSampleRate=16000` and `(189937 * 16000) / 1000000 = 3038.992`,
while `writtenFrames=3039`. This is fixed by using `Util.ceilDivide`
so we return `3039`, which means
`AudioTrackPositionTracker.hasPendingData()` returns `false` (since
`writtenFrames ==
durationUsToFrames(getCurrentPositionUs(/* sourceEnded= */ false))`).
#minor-release
Issue: androidx/media#538
PiperOrigin-RevId: 554481782
We currently only force the first frame if the frame timestamp is
greater than the stream *offset*.
This is wrong for two reasons:
1. The timestamp and the offset are not comparable and it should be
the stream start position.
2. The check should only be applied at stream transitions where we
need to make sure that a new first frame isn't rendered until we
passed the transition point.
We have to fix both issues together, because fixing just issue (1)
causes seeks to before the start position to no longer render the
frame (and playback will be stuck). A new test covers this case.
We also amend the stream transition test case to actually test what it
promises to test and add a test for prerolling samples at the
beginning, to ensure the first frame is still renderered.
Issue: androidx/media#291
PiperOrigin-RevId: 552858967
We currently use 3 different booleans to track the state of the first
frame rendering, which implies that there are 8 distinct possible
overall states. However, this is actually a staged process and there
are only 3 different overall states in the current code. This means
it's clearer and easier to reason about if the variables are combined
to a single state value. Overall, this should be a complete no-op.
State mapping:
- rFFAReset=false, rFFAEnable=false, mayRenderFFAEINS=false
=> FIRST_FRAME_NOT_RENDERED_ONLY_ALLOWED_IF_STARTED
- rFFAReset=false and/or rFFAEnable=false, mayRenderFFAEINS=any
=> FIRST_FRAME_NOT_RENDERED
- rFFAReset=true, rFFAEnable=true, mayRenderFFAEINS=any
=> FIRST_FRAME_RENDERED
PiperOrigin-RevId: 552857802
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Instead of `text/x-exoplayer-cues`, we will use `application/x-media3-cues`.
The prefix should be `application` not `text` since the encoded form is arbitrary bytes, not necessarily text. The name should not reference `exoplayer`, since the Media3 Extractors (which are not part of `exoplayer`) produce this format.
PiperOrigin-RevId: 550181852
The main demo app was still targeting API 29 to avoid scoped storage
restrictions. It is now updated to 34 (like the rest of the demo apps)
and handles scoped storage as it should handle it.
More specifically:
- We need to request READ_MEDIA_... permissions instead of
READ_EXTERNAL_STORAGE from API33.
- The legacy scoped storage opt-out can be removed
- READ_MEDIA_... permissions don't allow arbitrary file access
if the file doesn't end in a typical media file extension, so
this change adds a remark on the guide page to place samples
in the app-specific directory.
- We also don't have to request permissions for the app-specific
directories.
- Custom json files can't be placed in arbitray local locations
because they don't end in a media file extension, as there is
no way we can request a permission to load them. This means we
can remove the storage request logic in SampleChooserActivity.
Issue: google/ExoPlayer#6045
PiperOrigin-RevId: 549252474
This ensures the DownloadService stays functional on Android 14
where defining this type is required. On Android 14 and above,
the app also needs to define the DATA_SYNC permission, which is
added to the demo app as well. In the future, this service type
will no longer be supported and DownloadService needs to be
rewritten with another background scheduling framework.
Issue: google/ExoPlayer#11239
PiperOrigin-RevId: 548994842
AudioMixingUtil#mix handles input & output in float or Int16 PCM. Given
Float and Int16 use different sample ratnes, this util handles
conversion between the two, based on the encoding being mixed to.
Migrate AudioMixer to use the util, removing AudioMixingAlgorithm
interface and implementation. ChannelMixingAudioProcessor will be
migrated after additional performance checks.
PiperOrigin-RevId: 548994584
This fixes two things in one go:
1. In order to indicate 'end of a cue' **without** relying on
`CuesWithTiming.durationUs`, `SubripParser` should have been emitting
an empty `List<Cue>` instead of the current behaviour of a
single-item list with `cue.text=""`.
2. There's no need for the empty cue (or cue list), we can use
`durationUs` to indicate the end of each list of cues.
There's no real need to ever have a `Cue` with `text=""`, so also
deprecate `Cue.EMPTY`.
PiperOrigin-RevId: 548938874
`EGL14` was added in API 17, so move all references into the `Api17` wrapper
class. `GLES30` requires API 18.
Remove some defensive calls to check that a context is current. Checking for GL
errors after calls should catch the case of calling GL methods without a
context (which is also only likely to come up early in development), and these
checks were not done consistently across all methods anyway. That allows
removing the API 17 requirement from `SceneRenderer` (where previously it
wasn't documented).
PiperOrigin-RevId: 548669946
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Add documentation for threading requirements at the class level (in
addition to existing documentation on the methods) to improve
discoverablility. Also fix a couple of nits in the javadoc (US English
spelling, avoid passive voice) and in `OnInputFrameProcessedListener`.
PiperOrigin-RevId: 546303732
Otherwise, errors like `GL_INVALID_FRAMEBUFFER_OPERATION` will only
report a `null` error string, instead of the proper error string.
PiperOrigin-RevId: 546273328
The actual errors are all positive hex values. Without this CL, we must first
convert decimal errors to hex ones before figuring out what went wrong.
PiperOrigin-RevId: 544695961
We introduced truncation to 32 chars in <unknown commit>
and included indent and offset in the calculation. I think this is
technically correct, but it causes problems with the content in
Issue: google/ExoPlayer#11019 and it doesn't seem a problem to only truncate actual
cue text (i.e. ignore offset and indent).
#minor-release
PiperOrigin-RevId: 544677965
On a MediaItem change, the input Format (and Effects to apply) may be
different. Therefore the AudioProcessingPipeline must be reconfigured
to determine what processing is active, and what the AudioFormat of the
data output is. In the event that it is different, additional
AudioProcessor instances must be used to ensure the encoder will still
be able to accept the audio buffers.
PiperOrigin-RevId: 544338451
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
By passing this class where it's needed, implementations don't need to store it
in a field (reducing boilerplate) and it's clearer that it can't be unset when
needed.
PiperOrigin-RevId: 542823522
The effects pipeline must receive images in the sRGB colorspace due to the color transfers applied in the shaders. Currently the burden to making sure images are in the right colorspaces falls onto apps. This CL ensures that this is not the case anymore.
PiperOrigin-RevId: 542323613
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
*** Original commit ***
Add a timer to end a video stream prematurely in ExtTexMgr
***
This has been submitting for more than 1.5hrs. "This presubmit is running slowly because you have been throttled by Build Queue due to using too much of your Product Area's quota."
adding NO_SQ as this is a pure rollback
PiperOrigin-RevId: 539135970
Add `HlsMediaSource.Factory.setTimestampAdjusterInitializationTimeoutMs(long)` to set the timeout for the loading thread to wait for the `TimestampAdjuster` to initialize. If the initialization doesn't complete before the timeout, a `PlaybackException` is thrown to avoid the playback endless stalling. The timeout is set to zero by default.
This can avoid HLS playback endlessly stalls when manifest has missing discontinuities. According to the HLS spec, all variants and renditions have discontinuities at the same points in time. If not, the one with discontinuities will have a new `TimestampAdjuster` not shared by the others. When the loading thread of that variant is waiting for the other threads to initialize the timestamp and hits the timeout, the playback will stall.
Issue: androidx/media#323
#minor-release
PiperOrigin-RevId: 539108886
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
The sample timestamp carried by the emsg box can have a significant delta when comparing to the earliest presentation timestamp of the segment. Using this timestamp to intialize the timestamp offset in TimestampAdjuster will cause the media sample to have a wrong adjusted timestamp. So we should defer adjusting the metadata sample timestamp until the TimestampAdjuster is initialized with a real media sample.
PiperOrigin-RevId: 538172841
When initiated by MediaController, it should be possible for `MediaSession` to pass `MediaItems` to the `Player` if they have `LocalConfiguration`. In such case, it is not required to override `MediaSession.Callback.onAddMediaItems`, because the new current default implementation will handle it.
However, in other cases, MediaItem.toBundle() will continue to strip the LocalConfiguration information.
Issue: androidx/media#282
#minor-release
PiperOrigin-RevId: 537993460
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
This is a breaking change, but the alternatives seem either equally
breaking or worse, since the only way to make this non-breaking is
to add the `Throwable` overloads as `default` methods. It's then
unclear how we would ever migrate to these being the 'only' methods
or whether we'd have to keep both forms forever (which results in
duplication in the `Logger` implementations).
The clean break here also makes it clear that the `message` parameter
of `Log.Logger.{d,i,w,w}()` no longer automatically includes any info
from the `Throwable` passed to the static `Log.{d,i,w,e}() methods.
----
This CL also cleans up the javadoc on the static `Log.{d,w,i,e}` methods
since they no longer necessarily call straight through to the
corresponding `android.util.Log` methods (and haven't since <unknown commit>
and Issue: google/ExoPlayer#10185).
PiperOrigin-RevId: 537817974
