Did not do this optimisation for `AdPlaybackState.AdGroup` as its length is zero for `AdPlaybackState` with no ads.
No need to pass default values while fetching keys, which we always set in `AdPlaybackState.AdGroup.toBundle()`.
PiperOrigin-RevId: 496995048
(cherry picked from commit 7fc2cdbe1b)
Added another check in test to make sure we don't add keys to bundle for fields with `null` values.
PiperOrigin-RevId: 496948705
(cherry picked from commit 13c93a3dd6)
There are two overloads of this method due to a type 'rename' from
`PlayerControlView.VisibilityListener` to
`PlayerView.ControllerVisibilityListener`. Currently when you call one
overload it passes `null` to the other one (to clear the other listener).
Unfortunately this results in it clearing itself, because it receives
a null call back!
This change tweaks the documentation to clarify that the 'other'
listener is only cleared if you pass a non-null listener in. This solves
the recursive problem, and allows the 'legacy' visibility listener to be
successfully registered.
Issue: androidx/media#229
#minor-release
PiperOrigin-RevId: 496876397
(cherry picked from commit 4087a011e2)
Users of this class may run into these assertions when creating the
State and they need to check the source code to understand why
the State is invalid. Adding error messages to all our correctness
assertions helps to understand the root cause more easily.
PiperOrigin-RevId: 496875109
(cherry picked from commit 6c98f238e4)
Also clean up the strict mode violations of using `BitmapFactory.convertToByteArray` on the main thread.
PiperOrigin-RevId: 496422355
(cherry picked from commit d848d3358a)
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
(cherry picked from commit 5fa115641d)
The period updates were introduced to ensure the buffered position is
updated regularly and that any playback position drift is corrected.
None of these updates need to happen while the player is paused or
not loading and we can avoid the constant binder interactions.
PiperOrigin-RevId: 496329800
(cherry picked from commit 0749b05923)
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
(cherry picked from commit 49ccfd6383)
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
(cherry picked from commit a1954f7e0a)
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
(cherry picked from commit 3e7f53fda7)
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
(cherry picked from commit d11e0a35c1)
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
(cherry picked from commit 545fa59462)
This ensures they are not accidentally triggered again when
the state is rebuilt with a buildUpon method.
PiperOrigin-RevId: 495280711
(cherry picked from commit a123134892)
This improves the time taken to construct PlayerInfo from bundle from ~600ms to ~450ms.
PiperOrigin-RevId: 495055355
(cherry picked from commit 395cf4debc)
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
(cherry picked from commit 6e7de583bb)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit ab6fc6a08d)
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
(cherry picked from commit 927b2d6a43)
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
(cherry picked from commit ae8000aeca)
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
(cherry picked from commit 4895bc42ff)
The callback is currently triggered on the ExoPlayer playback thread
instead of the app thread that added the listener.
PiperOrigin-RevId: 492474405
(cherry picked from commit 634c6161f1)
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
(cherry picked from commit 2650654dd0)
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
(cherry picked from commit 33bbb9511a)
This allows legacy media controllers and browsers to access this
information and legacy sessions and browser services to set this
information.
PiperOrigin-RevId: 492414716
(cherry picked from commit ca4c6efdb7)
Do not log the exception stack traces raised by the BitmapLoader when a
bitmap fails to load, e.g. when the artwork's URI scheme is not
supported by the SimpleBitmapLoader. The logs are kept in place but only
a single line is printed.
#minor-release
PiperOrigin-RevId: 492191461
(cherry picked from commit f768ff970c)
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
(cherry picked from commit e4fb663b23)
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
(cherry picked from commit f007238745)
This CL makes it possible to create a media3 ControllerInfo in test code, which is needed to test several aspects of a media3-based media app. It does this by exposing a test-only static factory method. This is a hacky low-effort approach; a better solution could be to split ControllerInfo up into a public interface that was exposed to client logic, and that they could extend, and a package-private implementation with internal fields like the callback. That's a much bigger change, however.
PiperOrigin-RevId: 491978830
(cherry picked from commit 69093db7f5)
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
(cherry picked from commit ff7fe222b8)
Issue: androidx/media#213
Without a public constructor, it is not possible to extend this class and override its method.
PiperOrigin-RevId: 491673111
(cherry picked from commit f3e450e783)
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
(cherry picked from commit d12afe0596)
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
(cherry picked from commit 568fa1e1fa)
The list of charsets is already hard-coded, and using `Charset` types
ensures they will all be present at run-time, hence we will never
encounter an 'unsupported' charset.
PiperOrigin-RevId: 491324466
(cherry picked from commit 5292e408a6)
