Most demo videos aren't very long, and the default demo video is only 10 seconds.
Shorten the maximum trim duration to 10 seconds, to demonstrate transformer functionality more easily, and allow this to be used more easily when trimming short sections of a longer video (ex. to make test clips)
PiperOrigin-RevId: 480602037
(cherry picked from commit f35bda3524)
Player controls are somewhat distracting when showing the difference between the
input and output video, as they obscure and darken the video players.
PiperOrigin-RevId: 480597804
(cherry picked from commit 51edb329a1)
Before, slider values were read as `floor()`'ed `longValue()`s, so that trimming to
intervals less than one second would be interpreted as a request for a zero-
duration trim.
Also, rename `radiusRange` references here to `trimRange`, since this is not a
radius range.
PiperOrigin-RevId: 480401556
(cherry picked from commit fb5cd18dcd)
We currently use the literal -1 (=NO_VALUE) when adding up the
total. Tracks without known bitrate can be ignored in the
calculation, but we should use an explicit value of 0.
#minor-release
Issue: google/ExoPlayer#10664
PiperOrigin-RevId: 480048126
(cherry picked from commit b0daae72cf)
If the sample type is Dolby Vision and the display does not support Dolby Vision, then the capabilities DecoderSupport flag is set to DECODER_SUPPORT_FALLBACK_MIMETYPE. This denotes that the renderer will use a decoder for a fallback mimetype if possible. This alters track selection as tracks with DecoderSupport DECODER_SUPPORT_PRIMARY are preferred.
UnitTests included
-DefaultTrackSelector test that checks track selection reordering with DECODER_SUPPORT_FALLBACK_MIMETYPE
-MediaCodecVideoRenderer test that checks setting of DecoderSupport flag based on Display's Dolby Vision support
Issue: google/ExoPlayer#8944
PiperOrigin-RevId: 480040876
(cherry picked from commit 266de1b21b)
Replace the instance-field MediaController with a local instance created
in each test.
PiperOrigin-RevId: 480039768
(cherry picked from commit ba1ecafb8f)
PlayableFolderActivity currently uses two seperate commands
to set the playlist and then seek to the requested item.
This is slightly inefficient and also causes analytics
listeners to believe the first item in the playlist was
briefly active.
#minor-release
Issue: androidx/media#180
PiperOrigin-RevId: 480031682
(cherry picked from commit 5d6d069e4e)
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
(cherry picked from commit a426cb27c0)
Remove static imports to constants and imports to intdefs, to make the
code more readable.
PiperOrigin-RevId: 479594144
(cherry picked from commit 36e12fbadb)
Also, update tests to allow AnyOf error codes, and no longer check exception messages, which caused quite a bit of churn.
PiperOrigin-RevId: 479570861
(cherry picked from commit 8548e3519e)
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
(cherry picked from commit 26be9ae885)
* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 5bff862374)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit b70258e43d)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit 139a6e8d31)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 253486d4af)
When a media service currently produces multiple media sessions, the notification of the second session overwrites the notification of the first one, because all sessions use the same notification ID. When we use different notification IDs for different sessions, multiple media notifications can be up at the same time, which means that they can both be controlled at the same time.
PiperOrigin-RevId: 478709069
(cherry picked from commit 7783c6e4f7)
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
(cherry picked from commit de82a2be33)
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
(cherry picked from commit 62b95a7190)
One of the tests in MediaBrowserListenerTest caused the remote
browser service to crash and then just timed out. As this asserts
nothing useful besides checking that the timeout method is working,
we can remove the test.
Crashing the remote browser service had the side effect of letting
subsequent tests in the same class fail because the previous session
was never released and was still present in the static MediaSession
SESSION_ID_TO_SESSION_MAP instance, which prevented the creation
of new sessions with the same id. This is only an issue in test
runs because a real process would also lose its static variables
when it crashes.
PiperOrigin-RevId: 476905337
(cherry picked from commit d2887d5237)
`PlaybackStateCompat.toKeyCode(command)` was replaced by our
own implementation of `toKeyCode()`. The legacy implementation used PLAY and PAUSE, while the new implementation uses PLAY_PAUSE. This made `pause` a pending intent that attempt to start the service in the foreground, but `service.startForeground()` won't be called in `MediaNotificationManager.updateNotificationInternal` when paused.
PiperOrigin-RevId: 476895752
(cherry picked from commit acd9e581c4)
Calling maybeUpdateLegacyErrorState potentially creates a new legacy playback
state which involves calling player methods. This change makes sure that the call
sites of `maybeUpdateLegacyErrorState` are called on the app thread as enforced by
the library.
PiperOrigin-RevId: 476406282
(cherry picked from commit 74124f48ea)
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
(cherry picked from commit a069ebda47)
* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.
PiperOrigin-RevId: 476388021
(cherry picked from commit 44b9aec0b9)
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
(cherry picked from commit ed79f4696f)
* Transform the intermediate color space to linear SDR by applying the SMPTE 170M EOTF and OETF.
* Use linear colors for the color filter pixel tests and update all golden bitmaps.
PiperOrigin-RevId: 476124592
(cherry picked from commit 3433758c3b)
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
(cherry picked from commit 715c948004)
