*** Original commit ***
Handle int instead of byte in SSIM.
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
***
PiperOrigin-RevId: 473259446
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
PiperOrigin-RevId: 473231779
Test that HDR editing succeeds on devices supporting HDR editing, tone maps on
devices supporting tone mapping, and throws exceptions on all other devices.
Also, only restrict HDR editing and tone mapping support to API 31+ only when
transcoding, not for all transformations.
PiperOrigin-RevId: 472958965
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
shouldPassthrough's internal checks seem to be check whether we should *not*
pass through, which seemed a bit like a confusing double-negative to me.
shouldTranscode is slightly more clear, by instead returning true when we do
want to transcode.
No functional changes intended.
PiperOrigin-RevId: 471753771
3b0d2c1586 made `shouldPassthrough` always return false for `enableHdrVideoEditing`:
>We force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
However, this was introduced before the `videoNeedsEncoding` setting was introduced in 3f615040c0. That setting should apply to HDR videos as much as SDR videos.
PiperOrigin-RevId: 471569853
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471198016
In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.
PiperOrigin-RevId: 471037733
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.
Also, swap the OETF and EOTF in shaders, as they were used incorrectly before
Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.
PiperOrigin-RevId: 469736067
Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.
More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.
PiperOrigin-RevId: 468473072
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
createSupportedTransformationRequest is more accurate than
createFallbackTransformationRequest, as a TransformationRequest will be returned
regardless of whether any fallback is applied.
PiperOrigin-RevId: 466641277
Previously, this feature interpreted SDR signals as HDR when called. Now, only HDR
streams are interpreted as HDR, so the javadoc should be updated. Not yet removing
this method, as there are still some loose ends to finish up (ex. PQ support, e2e
tests).
PiperOrigin-RevId: 466425738
While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.
Therefore, it's more specific to mention just that the transfer is HDR.
PiperOrigin-RevId: 466316960
This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.
No functional change intended in this CL.
PiperOrigin-RevId: 466070764
In the case where this check fails, the downstream frame processor chain won't be able to handle the incoming (SDR) data anyway as we've already set it up for HDR.
PiperOrigin-RevId: 465584814
`requestCalculateSsim` more clearly represents the intention of the caller.
Also rephrase the javadoc to simplify it and make it more precise.
PiperOrigin-RevId: 465575578
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
Format.NO_VALUE is a placeholder value for an invalid @C.ColorTransfer, used
for example when the decoder doesn't support this transfer function.
When encountering this invalid value, interpret this as COLOR_TRANSFER_SDR.
Confirmed locally that an exception is thrown when transcoding on p4head, and no exception is thrown when transcoding with this CL.
PiperOrigin-RevId: 464135080
This will allow effects preview in ExoPlayer to use the
Effect and FrameProcessor interface (and the interfaces
they depend on) without depending on transformer or the
future effects module.
PiperOrigin-RevId: 464060047
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
Despite unregistering the callback and clearing pending Handler
messages, the callback may still receive pending calls if they
are already triggered by the AudioTrack. Instead of asserting
that the track is correct, we should gracefully ignore stale
events.
PiperOrigin-RevId: 463851393
TransformationException error codes were previously tied to OpenGL
but other FrameProcessor implementations are possible. So this CL
renames the error codes.
Also, remove GL_INIT_FAILED error code, as FrameProcessor
implemenations may initialize resources on a background thread
after the factory method returns, so it's not obvious how to
distinguish between initialization failures and processing failures.
PiperOrigin-RevId: 463704902
Just a misc nit, since I found the name a bit confusing, and figured
findEncoderWithClosestSupportedFormat might be more descriptive.
PiperOrigin-RevId: 463433646
Extract a FrameProcessor.Factory interface from GlEffectsFrameProcessor
and allow it to be customized using a setter on Transformer.Builder.
PiperOrigin-RevId: 463433438
Size requires API 21. Using Pair instead will allow effects to be
used from API 18 during previewing once they are moved out of
transformer.
PiperOrigin-RevId: 463206474
This is needed for applying effects to a playlist.
The effects are applied based on the presentation time of the
frame in its corresponding media item and the offset is added
back before encoding.
Each time the offset changes, end of input stream is signalled
to the texture processors. This is needed because the texture
processors can expect monotonically increasing timestamp within
the same input stream but when the offset changes, the timstamps
jump back to 0.
PiperOrigin-RevId: 462714966
This allows us to use BT.2020 RGB linear for intermediate shaders, which also
allows us to re-enable PeriodicVignetteProcessor, which should work properly in
linear color-spaces.
Manually tested by adding a GlEffectsWrapper, and confirming that HLG HDR editing still looks correct.
PiperOrigin-RevId: 462265821
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
Otherwise, invalid ColorInfo instances generated using faulty
MediaFormat#getInteger values could cause exceptions.
Confirmed that b/239435670 reproduces without this CL, and does not reproduce
with this CL.
PiperOrigin-RevId: 461862191
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
This may happen when a containers' color transfer incorrectly does not match
the video's color transfer.
An example of a file with such a mismatch is the current Transformer demo HDR10
sample file.
Manually tested by confirming that no errors are emitted for SDR and HLG sample
files, and that errors are emitted for our incorrect HDR10 sample file.
PiperOrigin-RevId: 461583532
- Update profile selection logic to pick an HDR-compatible profile when doing HDR editing on H.264/AVC videos.
- Handle doing the capabilities check for all MIME types that support HDR (not just H.265/HEVC).
- Fix a bug where we would pass an HDR input color format to the encoder when using tone-mapping.
- Tweak how `EncoderWrapper` works so decisions at made at construction time.
Manually tested cases:
- Transformation of an SDR video.
- Transformation of an HDR video to AVC (which triggers fallback/tone-mapping on a device that doesn't support HDR editing for AVC).
- Transformation of an HDR video with HDR editing.
PiperOrigin-RevId: 461572973
