This was used in media1 `MediaItemDescription` to indicate the download
status of a media item. When connected to a legacy
`MediaBrowserServiceCompat` the Media3 browsers converts the legacy
media item to a Media3 `MediaItem` and converts the extras of
`MediaDescriptionCompat.extras` to `MediaMetadata.extras`.
#cherrypick
PiperOrigin-RevId: 654625502
(cherry picked from commit 225ad482b1)
To support AMR audio codec(audio/3gpp) add `0x81FF` mode to create damrBox.
Add unit test and an Android end to end test.
PiperOrigin-RevId: 652438693
(cherry picked from commit 11ca78761e)
As reported in Issue: androidx/media#1493 we already use `HEADSETHOOK` to start
waiting for a double-tap, but we don't consider it for the second tap.
Similarly, we previously considered `PLAY` for the second tap, but not the first.
Only `HEADSETHOOK` and `PLAY_PAUSE` are
[documented](https://developer.android.com/reference/androidx/media3/session/MediaSession#media-key-events-mapping)
to transform double-tap to `seekToNext`. So this change removes the
`PLAY` detection from the second tap.
PiperOrigin-RevId: 651017522
(cherry picked from commit c64dacf3df)
Add support for MPEG4 codec to enable muxing video encoded with the mp4v-es codec. Use esdsBox method to generate esds box required for Mp4v box.
PiperOrigin-RevId: 651000744
(cherry picked from commit 34a802ef38)
Some external media files have CodecSpecificData greater than 128 bytes. Currently, that size
isn't fitting in one byte. Hence, added support to store large CodecSpecificDataSize, as per
ISO standard, by extending to more than one byte as required.
PiperOrigin-RevId: 650972472
(cherry picked from commit cf90d2624d)
eglDestroySurface now unbinds surface from the GL
thread to ensure quick release of resources.
PiperOrigin-RevId: 650938712
(cherry picked from commit 70a6b5d50d)
Implement damrBox to provide support for amr-wb audio codec.
Add unit test and an Android end to end test.
PiperOrigin-RevId: 650210732
(cherry picked from commit 6e18cb0053)
Since the muxer supported only AAC audio codec, the esdsBox was unconditionally created within the audioSampleEntry. This CL refactors the box creation logic by moving it to the codecSpecificBox method. This is to make adding support for new audio codecs easier.
PiperOrigin-RevId: 650130935
(cherry picked from commit a269355369)
The percentage should be interpreted as relative to the size of a parent
node.
This change makes this inheritance work correctly for percentages in
both the parent and child. It does not fix the case of a non-percentage
parent size with a percentage child size.
PiperOrigin-RevId: 649631055
(cherry picked from commit bb2fd002ae)
Lint somehow complains that the integer resulting from the bit-manipulation shouldn't be passed as an @IntDef parameter.
#cherrypick
PiperOrigin-RevId: 648687698
(cherry picked from commit afe3826d7c)
This change extends the error replication to a given set of
error codes (not only authentication error), but only
replicates an error if the caller of the service `Callback`
is a legacy controller. It also makes error replication
configurable so that apps can opt-out and report errors
manually instead, or define the error codes for which
replication is enabled.
The change also removes the restriction of `sendError` only
being available for Media3 controllers. Instead, sending an
error to a legacy controller updates the platform playback
state in the same way as sending the error to the media
notification controller.
#cherrypick
PiperOrigin-RevId: 648399237
(cherry picked from commit 70c063905c)
Upon track transition of offloaded playback of gapless tracks, the framework will reset the audiotrack frame position. The `AudioTrackPositionTracker`'s `AudioTimestampPoller` must be made to expect the reset and cache accumulated sum of `AudioTimestamp.framePosition`.
#cherrypick
PiperOrigin-RevId: 647294360
(cherry picked from commit a58e77a5a6)
When handling a playback error that originates from a future item in
the playlist, we added support for jumping to that item first,
ensuring the errors 'happen' for the right 'current item'.
See 79b688ef30.
However, when we add this new position discontinuity to the
playback state, there may already be other position discontinuities
pending from other parts of the code that executed before the
error. As we can't control that in this case (because it's part
of a generic try/catch block), we need to send any pending
updates first before handling the new change.
Issue: androidx/media#1483
PiperOrigin-RevId: 646968309
(cherry picked from commit 727645179b)
Setting a `null` value doesn't remove the key as expected per the `MediaFormat` API documentation, using the `removeKey` method instead which is only available starting API level 29.
PiperOrigin-RevId: 646462402
(cherry picked from commit 12c42585d2)
ExoPlayer used to call `stop()` before `release()`. This was removed in
<unknown commit>.
A framework bug introduced in Android 11 (API 30) resulted in some
DRM -> clear transitions failing during `MediaCodec.configure()`. An
investigation in Issue: google/ExoPlayer#8696 and b/191966399 identified that this was
due to `release()` returning 'too early' and the subsequent
`configure()` call was then trying to re-use a `Surface` that hadn't
been fully detached from the previous codec. This was fixed in
Android 13 (API 33) with http://r.android.com/2094347.
ExoPlayer worked around the framework bug by adding an arbitrary 50ms
sleep after a failed codec initialization, followed by retrying. This
was enough to resolve the problem in the test scenario on a OnePlus
AC2003.
Issue: androidx/media#1497 points out that 50ms might not be the appropriate delay
for all devices, so it's an incomplete fix. They suggested re-adding the
`MediaCodec.stop()` call instead. This also reliably resolves the issue
on the OnePlus AC2003 (with neither workaround in place, the problem
repros almost immediately).
PiperOrigin-RevId: 646461943
(cherry picked from commit 5fcc7433a1)
Extractors should not report additional tracks once they called
ExtractorOutput.endTracks. This causes thread safety issues in
ProgressiveMediaPeriod where the array of sample queues is
extended while the playback thread accesses the arrays.
Detecting this problem early is beneficial to avoid unexplained
exceptions later one. In most cases where this may happen (namely
TS extractors finding new tracks), it's better to ignore the new
tracks instead of failing completely. So this change adds a
warning log message and assigns a placeholder output.
Note: The same workaround already exists in HlsSampleStreamWrapper
and MediaExtractorCompat.
Issue: androidx/media#1476
#cherrypick
PiperOrigin-RevId: 646427213
(cherry picked from commit 18e631ff79)
The two arrays need to have the same length and the selection
must match in their nullness (unless for TYPE_NONE
renderers). Clarify this more clearly in the docs and add
new asssertions for it. This avoids that the player is failing
in obscure ways much later.
Issue: androidx/media#1473
#cherrypick
PiperOrigin-RevId: 646086833
(cherry picked from commit 71ef848ec3)
The test is flaky because the decoding process in the renderer
depends on some timing from MediaCodec beyond our control and
the new keyframe added in the test is sometimes 'dropped' when
it arrives too late.
We can fix this by controlling the test progress a bit more
tightly: first rendering with the same current time until the
key frame is processed and then start increasing the time
until we've reached the end.
#cherrypick
PiperOrigin-RevId: 646064352
(cherry picked from commit ada4dc982f)
Previously we assumed that `surfaceSyncGroupV34` was always non-null on
API 34, but this isn't true in edit mode. Instead we add an explicit
null-check before accessing it. We don't need to null-check it at the
other usage site because we are already null-checking `surfaceView` (via
`instanceof` check).
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 645008049
(cherry picked from commit 99803066ea)
This class is a lower-level UI component that isn't directly needed if
apps are using `PlayerView` to handle their video output (it is used as
an implementation detail of `PlayerView`).
Removing its unecessary usages from this demo avoids developers copying
this as an example when building their own apps.
#cherrypick
PiperOrigin-RevId: 644972454
(cherry picked from commit cb8f87e05e)
Some cases are not handled correctly at the moment:
- Pausing during suppressed playback should not clear the
suppression state.
- Transient focus loss while paused should be reported as
a playback suppression.
Issue: androidx/media#1436
#cherrypick
PiperOrigin-RevId: 644971218
(cherry picked from commit e84bb0d21c)
Sometimes the reason for the current state may change. If we don't
report this again, users have no way of knowing that the reason
changed.
Also adjust ExoPlayerImpl and MediaControllerImplBase accordingly.
SimpleBasePlayer already adheres to this logic.
#cherrypick
PiperOrigin-RevId: 644970236
(cherry picked from commit 1d26d1891e)
This helps to keep the reason always together with the state it
is referring to, avoiding any side channels and making sure there
are no accidental inconsistencies.
#cherrypick
PiperOrigin-RevId: 644969317
(cherry picked from commit c0abd6f91e)
This workaround is only applied on API 34, because the problem isn't
present on API 33 and it is fixed in the platform for API 35 onwards.
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 644729909
(cherry picked from commit 968f72fec6)
In the case of a legacy session app providing an error
code different to `ERROR_UNKNOWN` without an error
message, a localized fallback message is provided
instead of ignoring the error.
#cherrypick
PiperOrigin-RevId: 644704680
(cherry picked from commit 6cc6444dd9)
The 'player commands' returned to ExoPlayerImpl instruct the
player on how to treat the current audio focus state.
The current return value when playWhenReady==false is misleading
because it implies we are definitely not allowed to play as if
we've lost focus. Instead, we should return the actual player
command corresponding to the focus state we are in.
This has no practical effect in ExoPlayerImpl as we already
ignore the 'player command' completely when playWhenReady=false.
To facilitate this change, we also introduce a new internal
state for FOCUS_NOT_REQUESTED to distinguish it from the state
in which we lost focus.
#cherrypick
PiperOrigin-RevId: 644416586
(cherry picked from commit 66c19390e2)
There are a lot of tests for AudioFocusManager in isolation,
but almost none for the handling in ExoPlayer.
Add test coverage for all the common cases, including some
currently broken behavior that is indicated by TODOs.
PiperOrigin-RevId: 644319251
(cherry picked from commit e20e94fde2)
