In ConcatenatingMediaSource, the source may be removed before it started
preparing (this may happen if lazyPreparation=true). In this case, we
shouldn't call releaseSource as the preparation didn't start.
Issue:#4986
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218141658
Apps need to set the target compatibility to VERSION_1_8 to enable the
automatic desugaring if they haven't done so already.
Issue:#4907
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215733070
This makes the following changes to improve consistency among the PlaybackInfo
values:
1. Update buffered position and total buffered duration after loading period
is set as both values are affected by a loading period update.
2. Add copyWithPosition to allow updating the position without resetting the
loading period.
3. Forward the total buffered duration to playing position updates
as it may have changed with the new playing position.
Issue:#4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215712328
SubtitleView forwards the cue box position to SubtitlePainter. This should be
the position relative to the canvas of the SubtitleView. Currently, however,
we forward the position relative to the parent of SubtitleView. That causes
problems if SubtitleView has a non-zero offset position to its parent.
Issue:#4788
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215535281
This removes the experimental bandwidth meter and uses it as the new default.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215404065
If we prepare a deferred media period before the actual timeline is available,
we either prepare with position zero (= the default) or with a non-zero
initial seek position.
So far, the zero (default) position got replaced by the actual default position
(including any potential non-zero window offset) when the timeline became known.
However, a non-zero initial seek position was not corrected by the non-zero
window offset. This is fixed by this change.
Related to that, we always assumed that the deferred media period will the
first period in the actual timeline. This is not true if we prepare with an
offset (either because of an initial seek position or because of a default
window position). So, we also determine the actual first period when the
timeline becomes known.
Issue:#4873
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215213030
If a source is removed from the playlist, the player may still call createPeriod
for a period of the removed source as long as the new timeline hasn't been handled
by the player. These events are stale and can be ignored by using a dummy media
source. The stale media period will be released when the player handles the updated
timeline.
Issue:#4871
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214787090
This simplifies code skipping items in a playlist programatically.
Issue:#4863
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214580742
After a period transition the first buffer queued has the sum of previous period
durations added to its source presentation timestamp. These durations take into
account gapless edits, but the check on the timestamp was based on the submitted
frame count, not the frame count after trimming.
This change fixes an issue where audio/video would gradually drift apart due to
accumulated error in the audio track position, which could lead to freezing due
to the audio renderer stopping being ready and switching to the standalone media
clock.
Issue: #4559
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213819908
Currently there is no way to disable (or reduce) the logcat output generated
by ExoPlayer.
Issue:#4665
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213421072
This allows creating multiple HLS media sources from a single Factory, as
required by the interface.
Issue:#4814
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213297850
To check the validity of a window index it needs to be compared with a greater
or equal sign to the window count.
Issue:#4822
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213234403
If we can select a track that has a strictly higher score than a
selection already made for a renderer of the same type, we should
prefer it.
Issue: #4711
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212835895
This allows to update the shuffle order after the ConcatenatingMediaSource
has been created. ShuffleOrder objects should be immutable to ensure thread
safety and thus there is no way to do this currently.
Issue:#4791
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212443146
When the stream is changed in the audio renderer, the timestamps of the
samples can no longer be expected to match the calculations in the AudioSink.
This change tracks the samples at which the stream is changed and notifies the
AudioSink of the discontinuity.
Issue:#4559
Issue:#3829
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212435859
Ignoring all edit lists if they don't start with a keyframe causes A/V sync
issues when valid edit lists are applied at the beginning.
This change allows such edit lists again but removes all samples before the
first keyframe (these samples would be ignored by the renderer anyway if at
the beginning OR cause visible distortions when appended to an unrelated
keyframe).
Issue:#4774
Issue:#4348
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212244407
1. Currently, we may throw source info refresh errors while the previous media
period is still playing.
2. We don't throw if the next period in a playlist fails to prepare and the
previous renderers are all disabled.
3. We throw source info refresh errors for playlists before playback reaches
the culprit source.
This change:
1. Defers the exceptions until all existing media periods have been played.
2. Checks for period preparation exception if the next period is not
getting prepared and the renderer time reached the next period.
3. Does no longer throw from ConcatenatingMediaSource.maybeThrowSourceInfo
RefreshError. The deferred media periods take care of that for each source
individually.
Issue:#4661
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211819436
- Try and put things into a vaguely sane order
- Remove/simplify overly-detailed release notes
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211447350
To report DRM session metrics in the future as part of the listener, we need
a callback at the end of the drm session to get the final metric state.
For completion, the session acquired callback is also added.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211328412
The current structure tries to associate events to media periods and windows
based on the reported values and the current timeline. However the reported
EventTime may not always be consistent in case the timeline doesn't contain
windows or media periods yet or not anymore.
The recent changes to MediaPeriodId allow to use it as a unique identifer for
media periods independent of the timeline. This enables more accurate tracking
of the media period queue and prevents reporting events with inconsistent
data.
Issue:#4492
Issue:#4634
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210713120
This provides the list of currently buffered media chunks and iterators over
the potential next chunks to the track selection. Having these two parameters
enables more advanced decision logic based on this data.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210551812
At the point of starting to play a postroll, source info refreshes for future
postroll ads in the same ad group would cause a seek that incorrectly identified
the media period to play as the content media period. Fix the logic in
getAdGroupIndexForPositionUs to address this.
Also handle empty postroll ad breaks by resetting the expected ad group index
when we send content complete.
Issue: #4710
Issue: #4681
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210071054
The response headers of the last load are available from the loading source
when creating media source events and can be easily forwarded.
Issue:#4361
Issue:#4615
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209900693
When playing a playlist where the exact maximum input size is known from the
container for each item, it may be necessary to recreate the decoder to increase
its maximum input buffer size at the point of transitioning from one item to the
next, which can make transitions non-seamless.
Scale up the initial video decoder maximum input size so playlist item
transitions with small increases in maximum sample size don't require
reinitialization.
Issue: #4510
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208650244
Also add support for parsing PlayReady DRM information
Issue:#4180
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208094290
Add automatic audio focus handling to SimpleExoPlayer. Audio focus
handling is an opt-in feature that can be requested by passing
the system's AudioManager and an AudioFocusConfiguration to
SimpleExoPlayer.setAudioFocusConfiguration.
When audio focus is being managed by SimpleExoPlayer, the player
will transparently handle pausing playback during
AUDIOFOCUS_LOSS_TRANSIENT, as well as lowering playback volume
during AUDIOFOCUS_LOSS_TRANSIENT_CAN_DUCK.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208045732
* Make dedicated section in RELEASENOTES
* Clean up AMR FACTORY
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207550281
This CL adds support for seeking witin TS streams by using binary search. For
any seek timestamp, it tries to find the location in the stream where PCR
timestamp is close to the target timestamp, and return this position as the
seek position.
Github: #966.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207529906
EventSampleStream.readData required eventStreamUpdatable to be
false for END_OF_STREAM to be returned, but it was only being
set to false when the manifest became static. This change also
sets it to false if the period is not the last one in a dynamic
manifest. It also renames it the parameter to appendable, since
that's what it really represents. Events may still be removed
from the start of the EventStream as the period starts moving
out of the live window.
Issue: #4492
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207517265
- Use ConstantBitrateSeeker to implement seeking for ADTS format. Since most
ADTS streams are VBR, we use the average bitrate of the first 1000 frames as
the average bit rate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207509651
This CL adds support for seeking within PS streams by using binary search. For
any seek timestamp, it tries to find the location in the stream where SCR
timestamp is close to the target timestamp, and return this position as the
seek position.
Github: #4476.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206787691
There is some risk associated with this change, as audio track buffers come from
shared memory and limits may be device-specific. I've tested these sizes on
Nvidia Shield TV and Nexus Player on various builds. The maximum size allocated
is about 800 KB. We could implement support for retrying creating the audio
track if it fails to initialize, but it seems preferable to avoid the extra
complexity required to do that unless we know it's necessary to work around
device-specific limitations.
Issue: #3803
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206749222
Period transitions with non-zero start position happen too early as the
playing period is advanced as soon as the renderer offset is reached not
taking into account that the start position needs to be added to that.
Issue:#4583
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206310328
Using this surface it's possible to play 360 videos in a non-VR Activity that is
affected by phone and touch input.
RELNOTES=true
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205720776
This allows to automatically forward bandwidth estimate events to
AnalyticsListeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205642752
This was only needed temporatily until we could ensure that the player always
provides a BandwidthMeter.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204903640
This bandwidth meter is then forwarded to the track selection and as a transfer
listener to media and data sources.
When no bandwidth meter is specified in the ExoPlayerFactory methods, a static
singleton instance will be used.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204881497
After [] we support default font size for TTML, relative to the cellResolution of the document. However, this introduced a bug that makes TTML font-size in such case always follow the cellResolution font size, even when SubtitleView.setApplyEmbeddedStyles(false) and SubtitleView.setApplyEmbeddedFontSizes(false) were used.
This CL updates the fix so that the default font-size using cellResolution works in the same way as other embedded styles, and can be turned off using setters from SubtitleView.
GitHub: #4491
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204467033
That allows to add listeners after the BandwidthMeter has been created which is
helpful as the BandwidthMeter instances are often long-lived static instances.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204255299
Add supports for reading duration for a PS stream by reading SCR values from
the header of packs at the start and at the end of the stream, calculating the
difference, and converting that into stream duration.
Github: #4476
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203954752
Until now, the streams were released and re-enabled for each type of stream
(primary, event, embedded) in that order. That leads to problems when replacing
streams from one type to another (for example embedded to primary).
This change restructures the track selection to:
1. Release and reset all streams that need to be released or replaced.
1(a). Including embedded orphan streams.
2. Select new streams.
Issue:#4477
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203751233
If there is only one track, we can assume that both boxes refer to the same track
even if the track indices don't match.
Issue:#4083
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203485872
Both boxes should contain the same list of track indices. However, if only one
track index in each list does not match, we can just assume that these belong
together.
Issue:#4477
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203481258
Codec initialization may fail in creation, configuration or when start()ing the
codec. If codec initialization fails, there may be other codecs available that
could handle the same format, but currently ExoPlayer can only try to use the
first listed codec for the input format and gives up if it fails to initialize.
This change implements support for optionally falling back to alternative
decoders if initialization fails. MediaCodecSelector can now return a list of
decoders to try in priority order, and use the Format when choosing a codec.
With the default implementation, the codecs and order come from MediaCodecList,
and matches the order used internally by MediaCodec.createDecoderByType (which
implements the same kind of fallback though only to the creation step, without
configuring/starting the codec).
This feature is useful for apps that want to play several videos concurrently on
devices that have software decoders (like OMX.google.h264.decoder), as the new
behavior allows new codecs to be created when no hardware-accelerated decoders
are available.
The list of available codecs is queried when initializing the codec after a
format change that requires a new codec to be instantiated. When a decoder fails
to initialize it is removed from the list of available decoders and won't be
tried again until the next format change (or until the renderer is disabled).
Note: this change does not affect the renderer capabilities API, as when
checking format support we don't know which codec will be used.
Issue: #273
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203242285
The new method allows to add transfer listeners (e.g. the BandwidthMeter) after
the data source has been created. To simplify the implementation for
subclasses, this change also introduces a BaseDataSource which handles
the list of listeners and the listener registration.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202649563
In the future, this allows to register the BandwidthMeter (managed by the player)
as a listener to all media transfers related to this media source.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202643946
- Extract ConstantBitrateSeeker from Mp3 package into a more general
ConstantBitrateSeekMap.
- Use this seekmap to implement seeking for AMR format.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202638183
From the spec:
If the EXT-X-INDEPENDENT-SEGMENTS tag appears in a Master
Playlist, it applies to every Media Segment in every Media
Playlist in the Master Playlist.
----
This requires propagation of attributes from the master
playlist to the media playlists. This CL only includes
independent segments, but other inheritable attributes
will be supported in following changes. Other inheritable
attributes include variable substitution definitions and
session keys.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202628422
This url is readily available when creating media source events (from the
data source) but so far not published to external listeners. This change
adds a new field to LoadEventInfo which corresponds to DataSource.getUri().
Issue:#2054
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202459049
