If stream is not considered final and `ClippingMediaSource` is read to `endUs`, then `BaseRenderer.readSource` returns `C.RESULT_NOTHING_READ`. In that case, the `lastBufferInStreamPresentationTimeUs` is not set and the last frame is not rendered.
PiperOrigin-RevId: 554418971
This workaround was added for TS streams that do not adjust their
timestamps to start from zero. Over time, the default audio sink
logic has become more robust towards unexpected timestamps and
we no longer need this workaround to jump forward in time.
The workaround also actively caused issues by adjusting the audio
timestamps backwards if the stream starts with large negative
values. See Issue: androidx/media#291. This caused playback to get stuck due
to another bug in the first-frame rendering logic in the video
renderer that is now fixed.
PiperOrigin-RevId: 553493618
This is the same change as 8655429af7, just on the second call site
of readDiscontinuity. The tests didn't cover this case yet because
they never queued more than 2 items in a playlist.
PiperOrigin-RevId: 553485244
This means we now require 2+ input frames per input, and compare the primary
stream timestamp with secondary stream timestamps in order to select the
correct output timestamp. We also must release frames and back-pressure as
soon as possible to avoid blocking upstream VFPs.
Also, improve signalling of VFP onReadyToAcceptInputFrame
PiperOrigin-RevId: 553448965
setInputFormat calls registerInputStream and will cause VideoFrameProcessor to
reconfigure. We don't need to call it when setting up the VFP
(in `onReadyToInitCodec()`). Rather, we wait until `onOutputFormatChanged()`
called (this output format refers to mediaCodec's outptut format) to register
the input stream.
PiperOrigin-RevId: 553448633
ExoPlayer queues the EOS buffer to the decoder with offset/size/timestamp all
equal to zero, and a EOS flag.
69769c77b3 set TIME_END_OF_SOURCE on the EOS buffer from the extractor.
Queueing the EOS buffer to the decoder with TIME_END_OF_SOURCE causes some
decoders to output wrong timestamps in its output.
This CL replicates what ExoPlayer does in Transformer.
PiperOrigin-RevId: 553104213
We currently only force the first frame if the frame timestamp is
greater than the stream *offset*.
This is wrong for two reasons:
1. The timestamp and the offset are not comparable and it should be
the stream start position.
2. The check should only be applied at stream transitions where we
need to make sure that a new first frame isn't rendered until we
passed the transition point.
We have to fix both issues together, because fixing just issue (1)
causes seeks to before the start position to no longer render the
frame (and playback will be stuck). A new test covers this case.
We also amend the stream transition test case to actually test what it
promises to test and add a test for prerolling samples at the
beginning, to ensure the first frame is still renderered.
Issue: androidx/media#291
PiperOrigin-RevId: 552858967
We currently use 3 different booleans to track the state of the first
frame rendering, which implies that there are 8 distinct possible
overall states. However, this is actually a staged process and there
are only 3 different overall states in the current code. This means
it's clearer and easier to reason about if the variables are combined
to a single state value. Overall, this should be a complete no-op.
State mapping:
- rFFAReset=false, rFFAEnable=false, mayRenderFFAEINS=false
=> FIRST_FRAME_NOT_RENDERED_ONLY_ALLOWED_IF_STARTED
- rFFAReset=false and/or rFFAEnable=false, mayRenderFFAEINS=any
=> FIRST_FRAME_NOT_RENDERED
- rFFAReset=true, rFFAEnable=true, mayRenderFFAEINS=any
=> FIRST_FRAME_RENDERED
PiperOrigin-RevId: 552857802
Refactored `CmcdLog` to `CmcdHeadersFactory` for improved representation of its purpose and updated implementations.
#minor-change
PiperOrigin-RevId: 552831995
This allows for custom implementations of this interface, like
a TestVideoCompositor or partner-implemented implementation
PiperOrigin-RevId: 552541631
`SubtitleExtractor` used to rely on a `SubtitleDecoder`. However, now all SubtitleDecoders that are used for side-loaded subtitles have been migrated to a `SubtitleParser` interface. We can therefore refactor the extractor.
The `SubtitleExtractor` is only used for side-loaded subtitles which means we do not require the migration of the CEA-608/708 `SubtitleDecoders`.
PiperOrigin-RevId: 552471710
Fix short term reference picture list parsing. Before this change, `deltaPocS0`
was derived by adding one to the value of the syntax element
`delta_poc_s0_minus1`, but (maybe surprising) the specification actually says
that `DeltaPocS0[stRpsIdx][i]` should be assigned the negation
`-(delta_poc_s0_minus1[i] + 1)` on the first iteration, then that value added
to the previous value on previous iterations. See equations (7-67) to (7-70) in
the 2021-08 version of the H.265/HEVC specification.
Also read the number of long term reference pictures once rather than on every
loop iteration (subsection 7.3.2.2.1).
PiperOrigin-RevId: 551852999
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Move shared test logic to the test runner.
This does increase indirection, which isn't usually preferable in tests.
However, we will have many different tests that would use logic
like this, so this allows us to reduce repetition.
PiperOrigin-RevId: 551536438
1. For codecs that change timestamps, we need to use greater
or equal instead of just equal for comparison.
2. We should only make this comparison once a value has been
set.
3. The largest queue timestamp isn't updated before using it
for this detection, meaning that we also mark the
second-to-last sample as the last one.
PiperOrigin-RevId: 550901978
This should make no functional difference because `SampleExporter` always
checks for H.265 and H.264 first. However, in case we ever change that code,
these are used in priority order so it's better to order them accordingly.
PiperOrigin-RevId: 550894935
We currently pass in the time at which the stream originally started,
but newly enabled renderers should get the current playback position
instead.
PiperOrigin-RevId: 550894630
When generating silence for AudioProcessingPipeline, audio never
queued EOS downstream.
Linked to this, when silence followed an item with audio, the silence
was added to SilentAudioGenerator before the mediaItem reconfiguration
occurred. If the silence had effects, the APP would be flushed after
silence queued EOS, resetting APP.isEnded back to false, so AudioGraph
never ended.
Regression tests reproduce failure without fix, but pass with it.
PiperOrigin-RevId: 550853714
For each event, the timestamp and presentation time is logged. The trace can
then be dumped to a tsv file and easily imported in a spreadsheet.
PiperOrigin-RevId: 550839156
Instead of `text/x-exoplayer-cues`, we will use `application/x-media3-cues`.
The prefix should be `application` not `text` since the encoded form is arbitrary bytes, not necessarily text. The name should not reference `exoplayer`, since the Media3 Extractors (which are not part of `exoplayer`) produce this format.
PiperOrigin-RevId: 550181852
signalEndOfInputStream is needed for when streams have different amounts of
frames, so that if the primary stream finishes after a secondary stream, it
can end without waiting indefinitely for the secondary stream's matching
timestamps.
onEnded mirrors this API on the output side, which will be necessary to
know when to call signalEndOfInput on downstream components (ex. on downstream)
VideoFrameProcessors
PiperOrigin-RevId: 549969933
The VideoFrameProcessingTaskExecutor already handles wrapping
GlUtil.GlException errors into VideoFrameProcessingExceptions.
Therefore, stop wrapping this ourselves, so that errors are
attributed to the correct line number with less indirection.
PiperOrigin-RevId: 549959258
Alters the OverlayShaderProgram implementation to support rotations, however we need to apply the transformations separately in order for them to work as expected so the matrix is removed from the interface in favour of explicit methods.
Adds a rotation test to ensure this ability doesn't regress
PiperOrigin-RevId: 549890847
The `MediaNotificationManager` registers an internal controller
to each session. This change marks this controller through its
connection hints and provides an API for apps to hide
implementation details of the marking.
Issue: androidx/media#389
PiperOrigin-RevId: 549712768
`TtmlDecoder` which used to be `SimpleSubtitleDecoder` will now be called `TtmlParser` and implement SubtitleParser interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `TtmlParser` instance.
PiperOrigin-RevId: 549700490
It is not part of the `SubtitleParser` interface's promise to give events for all changes to do with `Cue` objects. So while in the past, we would have `endTimeUs` of one Cue event being the `startTimeUs` of the next one, now we have that encoded in `durationUs` and can skip event with empty `Cues`.
PiperOrigin-RevId: 549629157
This tracker aims to replicate the behavior of a specific codec to
ensure MediaCodecRenderer correctly detects stream and output
format transitions. The class was needed because MediaCodecRenderer
made assumptions about codec behavior this codec did not fulfil (in
particular, changing timestamps and number of samples).
Since then, MediaCodecRenderer was made more robust to this kind of
codec behavior in general and currently has no assumptions that
require any special handling of this codec. This means we can remove
the workaround completely.
PiperOrigin-RevId: 549610989
This is no longer flaky because WebVTT subtitles are decoded on the
loading thread (enabled in this test with
`defaultExractorsFactory.setTextTrackTranscodingEnabled(true)` - and
supported for WebVTT since f0f24aa0d4).
PiperOrigin-RevId: 549594291
The class tries to be flexible to support as many different input
and codec behavior combinations as possible. But so far it didn't
spell out its remaining assumptions and explicit non-assumptions,
making it hard to know which behavior to rely on.
PiperOrigin-RevId: 549589347
Updated `ExoTrackSelection` to provide the most recent bitrate estimate, enabling the inclusion of measured throughput (mtp) as a CMCD-Request field in Common Media Client Data (CMCD) logging.
Additionally, made changes to the `checkArgument` methods in `CmcdLog` to prevent the use of default values in certain cases.
#minor-release
PiperOrigin-RevId: 549369529
`WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `WebvttParser` and implement `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `WebvttParser` instance. `WebvttSubtitle` will still be used behind the scenes to handle overlapping `Cues`.
PiperOrigin-RevId: 549298733
The end-to-end test output for the overlapping SRT and SSA subtitles
is currently incorrect. They will be fixed in a future change that
updates `TextRenderer` to support this overlap.
The 'extra' samples visible in the extractor test output files are
'empty cue list' samples produced by `SsaParser`. They will go away
when this implementation is updated to remove this behaviour and rely
on `CuesWithTiming.durationUs` instead (the 'empty list' behaviour is
not required by the `SubtitleParser` interface).
PiperOrigin-RevId: 549264593
The main demo app was still targeting API 29 to avoid scoped storage
restrictions. It is now updated to 34 (like the rest of the demo apps)
and handles scoped storage as it should handle it.
More specifically:
- We need to request READ_MEDIA_... permissions instead of
READ_EXTERNAL_STORAGE from API33.
- The legacy scoped storage opt-out can be removed
- READ_MEDIA_... permissions don't allow arbitrary file access
if the file doesn't end in a typical media file extension, so
this change adds a remark on the guide page to place samples
in the app-specific directory.
- We also don't have to request permissions for the app-specific
directories.
- Custom json files can't be placed in arbitray local locations
because they don't end in a media file extension, as there is
no way we can request a permission to load them. This means we
can remove the storage request logic in SampleChooserActivity.
Issue: google/ExoPlayer#6045
PiperOrigin-RevId: 549252474
*** Original commit ***
Rollback of b69b33206e
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
***
PiperOrigin-RevId: 549019403
This ensures the DownloadService stays functional on Android 14
where defining this type is required. On Android 14 and above,
the app also needs to define the DATA_SYNC permission, which is
added to the demo app as well. In the future, this service type
will no longer be supported and DownloadService needs to be
rewritten with another background scheduling framework.
Issue: google/ExoPlayer#11239
PiperOrigin-RevId: 548994842
AudioMixingUtil#mix handles input & output in float or Int16 PCM. Given
Float and Int16 use different sample ratnes, this util handles
conversion between the two, based on the encoding being mixed to.
Migrate AudioMixer to use the util, removing AudioMixingAlgorithm
interface and implementation. ChannelMixingAudioProcessor will be
migrated after additional performance checks.
PiperOrigin-RevId: 548994584
This was done because it was deemed correct to only start at timestamp
zero when the code was originally written. However, in case of
prerolling from a keyframe, many samples will get the same timestamp,
which is not correct and interferes with downstream logic
that deals with timestamps.
PiperOrigin-RevId: 548986160
This fixes two things in one go:
1. In order to indicate 'end of a cue' **without** relying on
`CuesWithTiming.durationUs`, `SubripParser` should have been emitting
an empty `List<Cue>` instead of the current behaviour of a
single-item list with `cue.text=""`.
2. There's no need for the empty cue (or cue list), we can use
`durationUs` to indicate the end of each list of cues.
There's no real need to ever have a `Cue` with `text=""`, so also
deprecate `Cue.EMPTY`.
PiperOrigin-RevId: 548938874
Reading a discontinuity from a media period indicates that a position
reset is required. As part of this event, the media period may need
further loading (e.g in a MergingMediaPeriod where one stream reported
a discontinuity and the other need to reload from this position).
This currently fails if the media periods was already fully loaded and
we started loading further items in the playlist. As a result, playback
is stuck forever. We can fix this by detecting that further loading is
needed and resetting the loading period to the current one.
The existing MergingPlaylistPlaybackTest already covers this case
reliably, because it combines all the right preconditions (merging
source, clipping to get a discontinuity and a playlist).
PiperOrigin-RevId: 548735177
This is a step towards adding general support for overlapping
subtitles in these formats (and others), both muxed and sideloaded:
* Issue: google/ExoPlayer#10295
* Issue: google/ExoPlayer#4794
This change adds these files to the end-to-end playback tests too, but
the subtitle track is currently disabled because renderer-side subtitle
parsing causes flaky tests (due to an uncontrolled thread in
`SimpleSubtitleDecoder`). The subtitle track will be re-enabled in
a follow-up change when loading-side subtitle parsing is added (so the
tests will no longer be flaky). At this point the overlapping subtitles
**still** won't be supported end-to-end, but a second change will
resolve this will changes in `TextRenderer` - which will change the
end-to-end playback dumps to reflect the overlapping subtitles.
PiperOrigin-RevId: 548705032
For now, just identical timestamps. A follow-up CL will allow for different
framerates. Prior tests already send identical timestamp frames, so no new
tests were added
PiperOrigin-RevId: 548676759
`EGL14` was added in API 17, so move all references into the `Api17` wrapper
class. `GLES30` requires API 18.
Remove some defensive calls to check that a context is current. Checking for GL
errors after calls should catch the case of calling GL methods without a
context (which is also only likely to come up early in development), and these
checks were not done consistently across all methods anyway. That allows
removing the API 17 requirement from `SceneRenderer` (where previously it
wasn't documented).
PiperOrigin-RevId: 548669946
The streams return end-of-input if they read no samples, but know that
they are fully buffered to at least the clipped end time. This helps to
detect the end of stream even if there are no new buffers after the end
of the clip (e.g. for sparse metadata tracks).
The race condition occurs because the buffered position is evaluated
after reading the sample. So between reading "no sample" and checking
the buffered position, the source may have loaded arbitrary amounts
of data. This may lead to a situation where the source has not read
all samples, reads NOTHING_READ (because the queue is empty) and then
immediately returns end-of-stream (because the buffered position
jumped forward), causing all remaining samples in the stream to be
skipped. This can fixed by moving the buffered position check to
before reading the sample, so that it never exceeds the buffered
position at the time of reading "no sample".
#minor-release
PiperOrigin-RevId: 548646464
Also re-use the `CuesWithTimingSubtitle` implementation (previously a
private class inside `DelegatingSubtitleDecoder`) in `ExoPlayerCuesDecoder`.
PiperOrigin-RevId: 548612040
It will act similarly to `SubtitleDecoderFactory`, but return parsers instead of decoders. In turn `SubtitleDecoderFactory.createDecoder()` cab wrap those parsers with `DelegatingSubtitleDecoder`.
PiperOrigin-RevId: 548528054
`PgsDecoder` which used to be `SimpleSubtitleDecoder` will now be called `PgsParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `PgsParser` instance.
PiperOrigin-RevId: 548520549
This serves as a sort of test with more frames for the compositor for now
(before more varied video system tests come later when integrating with
Transformer), showing it doesn't error out and outputs the right
amount of frames.
Due to the VFPTestRunner having a 5s timeout, and mostly due to presubmit
emulators being very slow with OpenGL, there is a sort of limitation
to how many frames this type of test can have, depending on the test target
PiperOrigin-RevId: 548159762
