Also clean up the strict mode violations of using `BitmapFactory.convertToByteArray` on the main thread.
PiperOrigin-RevId: 496422355
(cherry picked from commit d848d3358a)
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
(cherry picked from commit 5fa115641d)
The period updates were introduced to ensure the buffered position is
updated regularly and that any playback position drift is corrected.
None of these updates need to happen while the player is paused or
not loading and we can avoid the constant binder interactions.
PiperOrigin-RevId: 496329800
(cherry picked from commit 0749b05923)
The tunneling callbacks are sent via Handler messages and may be
handled after the codec/surface was changed or released.
We already guard against the codec/surface change condition by
creating a new listener and verifying that the current callback
happens for the correct listener instance, but we don't guard
against a released codec yet.
PiperOrigin-RevId: 495882353
(cherry picked from commit 49ccfd6383)
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
(cherry picked from commit a1954f7e0a)
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
(cherry picked from commit 3e7f53fda7)
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
(cherry picked from commit d11e0a35c1)
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
(cherry picked from commit 545fa59462)
This ensures they are not accidentally triggered again when
the state is rebuilt with a buildUpon method.
PiperOrigin-RevId: 495280711
(cherry picked from commit a123134892)
This improves the time taken to construct PlayerInfo from bundle from ~600ms to ~450ms.
PiperOrigin-RevId: 495055355
(cherry picked from commit 395cf4debc)
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
(cherry picked from commit 6e7de583bb)
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
(cherry picked from commit ab6fc6a08d)
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
(cherry picked from commit 927b2d6a43)
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
(cherry picked from commit ae8000aeca)
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
(cherry picked from commit 4895bc42ff)
The callback is currently triggered on the ExoPlayer playback thread
instead of the app thread that added the listener.
PiperOrigin-RevId: 492474405
(cherry picked from commit 634c6161f1)
This inconsistency was exposed by an upcoming change to deprecate
`POSITION_UNSET` in favour of `INDEX_UNSET` because position is an
ambiguous term between 'byte offset' and 'media position', as shown
here.
PiperOrigin-RevId: 492470241
(cherry picked from commit 2650654dd0)
Discovered while investigating Issue: google/ExoPlayer#10823
Example stack trace with the previous code (I added the index value for
debugging):
```
playerFailed [eventTime=44.07, mediaPos=44.01, window=0, period=0, errorCode=ERROR_CODE_FAILED_RUNTIME_CHECK
androidx.media3.exoplayer.ExoPlaybackException: Unexpected runtime error
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:635)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
Caused by: java.lang.IllegalArgumentException: index=-1
at androidx.media3.common.util.Assertions.checkArgument(Assertions.java:55)
at androidx.media3.extractor.text.webvtt.WebvttSubtitle.getEventTime(WebvttSubtitle.java:62)
at androidx.media3.extractor.text.SubtitleOutputBuffer.getEventTime(SubtitleOutputBuffer.java:56)
at androidx.media3.exoplayer.text.TextRenderer.getCurrentEventTimeUs(TextRenderer.java:435)
at androidx.media3.exoplayer.text.TextRenderer.render(TextRenderer.java:268)
at androidx.media3.exoplayer.ExoPlayerImplInternal.doSomeWork(ExoPlayerImplInternal.java:1008)
at androidx.media3.exoplayer.ExoPlayerImplInternal.handleMessage(ExoPlayerImplInternal.java:509)
at android.os.Handler.dispatchMessage(Handler.java:102)
at android.os.Looper.loopOnce(Looper.java:202)
at android.os.Looper.loop(Looper.java:291)
at android.os.HandlerThread.run(HandlerThread.java:67)
]
```
#minor-release
PiperOrigin-RevId: 492464180
(cherry picked from commit 33bbb9511a)
This allows legacy media controllers and browsers to access this
information and legacy sessions and browser services to set this
information.
PiperOrigin-RevId: 492414716
(cherry picked from commit ca4c6efdb7)
Do not log the exception stack traces raised by the BitmapLoader when a
bitmap fails to load, e.g. when the artwork's URI scheme is not
supported by the SimpleBitmapLoader. The logs are kept in place but only
a single line is printed.
#minor-release
PiperOrigin-RevId: 492191461
(cherry picked from commit f768ff970c)
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
(cherry picked from commit e4fb663b23)
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
(cherry picked from commit f007238745)
This CL makes it possible to create a media3 ControllerInfo in test code, which is needed to test several aspects of a media3-based media app. It does this by exposing a test-only static factory method. This is a hacky low-effort approach; a better solution could be to split ControllerInfo up into a public interface that was exposed to client logic, and that they could extend, and a package-private implementation with internal fields like the callback. That's a much bigger change, however.
PiperOrigin-RevId: 491978830
(cherry picked from commit 69093db7f5)
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
(cherry picked from commit ff7fe222b8)
Issue: androidx/media#213
Without a public constructor, it is not possible to extend this class and override its method.
PiperOrigin-RevId: 491673111
(cherry picked from commit f3e450e783)
Use the bitrate of the audio format (when available) in
DefaultAudioSink.AudioTrackBufferSizeProvider.getBufferSizeInBytes() to
calculate accurate buffer sizes for direct (passthrough) playbacks.
#minor-release
PiperOrigin-RevId: 491628530
(cherry picked from commit d12afe0596)
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
(cherry picked from commit 568fa1e1fa)
The list of charsets is already hard-coded, and using `Charset` types
ensures they will all be present at run-time, hence we will never
encounter an 'unsupported' charset.
PiperOrigin-RevId: 491324466
(cherry picked from commit 5292e408a6)
FakeClock keeps an internal list of messages to be executed to
ensure deterministic serialization. The next message from the list
is triggered by a separate helper message sent to the real Handler.
However, if the target HandlerThread is no longer alive (e.g. when
it quit itself during the message execution), this helper
message is never executed and the entire message execution chain
is stuck forever.
This can be solved by checking the return values of Hander.post or
Handler.sendMessage, which are false if the message won't be
delivered. If the messages are not delivered, we can unblock the
chain by marking the message as complete and triggering the next
one.
PiperOrigin-RevId: 491275031
(cherry picked from commit 8fcc063093)
Our FakeClock generally makes sure that playback tests are fully
deterministic. However, this fails if the test uses blocking waits
with clock.onThreadBlocked and where relevant Handlers are created
without using the clock.
To fix the flakiness, we can make the following adjustments:
- Use TestExoPlayerBuilder instead of legacy ExoPlayerTestRunner
to avoid onThreadBlocked calls. This also makes the tests more
readable.
- Use clock to create Handler for FakeVideoRenderer and
FakeAudioRenderer. Ideally, this should be passed through
RenderersFactory, but it's too disruptive given this is a
public API.
- Use clock for MediaSourceList and MediaPeriodQueue update
handler.
PiperOrigin-RevId: 490907495
(cherry picked from commit 6abc94a8b7)
Format expects the values of `averageBitrate` and `peakBitrate` in bps and the value fetched from AC3SpecificBox and EC3SpecificBox is in kbps.
PiperOrigin-RevId: 490756581
(cherry picked from commit 4066970ce7)
*** Original commit ***
Rollback of 76df06a7a3
*** Original commit ***
Parse and set `peakBitrate` for Dolby TrueHD(AC-3) and (E-)AC-3
#minor-release
***
***
PiperOrigin-RevId: 490707234
(cherry picked from commit 82711630ed)
*** Original commit ***
Parse and set `peakBitrate` for Dolby TrueHD(AC-3) and (E-)AC-3
#minor-release
***
PiperOrigin-RevId: 490570517
(cherry picked from commit 427329175e)
Before this change, the bitmap loading result with mainHandler, in which we set the metadata to `MediaSessionCompat`. However, the `MediaSessionCompat` is not thread safe, all calls should be made from the same thread. In the other calls to `MediaSessionCompat`, we ensure that they are on the application thread (which may be or may not be main thread), so we should do the same for `setMetadata` when bitmap arrives.
Also removes a comment in `DefaultMediaNotificationProvider` as bitmap request caching is already moved to CacheBitmapLoader.
PiperOrigin-RevId: 490524209
(cherry picked from commit 80927260fd)
This change includes a change in the `IMediaController.aidl` file and needs
to provide backwards compatibility for when a client connects that is of an older or
newer version of the current service implementation.
This CL proposes to create a new AIDL method `onPlayerInfoChangedWithExtensions`
that is easier to extend in the future because it does use an `Bundle` rather than
primitives. A `Bundle` can be changed in a backward/forwards compatible way
in case we need further changes.
The compatibility handling is provided in `MediaSessionStub` and `MediaControllerStub`. The approach is not based on specific AIDL/Binder features but implemented fully in application code.
Issue: androidx/media#102
#minor-release
PiperOrigin-RevId: 490483068
(cherry picked from commit 3d8c52f28d)
The direct executor is not the proper way to determine on what thread to run the
`Future.Listener` and the `MediaControllerCreationListener` because the listener
may call the controller passed as argument which must happen on the same thread
that built the controller. This change makes sure this is the case.
PiperOrigin-RevId: 490478587
(cherry picked from commit 68908be18d)
This avoids that apps have to depend on the legacy compat support
library when they want to make this conversion.
Also add a version to both helper methods that takes a Looper to
give apps the option to use an existing Looper, which should be
much faster than spinning up a new thread for every method call.
Issue: androidx/media#171
PiperOrigin-RevId: 490441913
(cherry picked from commit 03f0b53cf8)
When receiving the `onTimelineChanged` callback, we convert the timeline to the list of `QueueItem`s, where decoding a bitmap is needed for building each of the `QueueItem`s. The strategy is similar to what we did in <unknown commit> for list of `MediaBrowserCompat.MediaItem` - set the queue item list until the bitmaps decoding for all the `MediaItem`s are completed.
PiperOrigin-RevId: 490283587
(cherry picked from commit 8ce1213ddd)
ExoPlayer is unable to detect the presence of subtitle tracks in some
MPEG-TS files that don't fully declare them. It's possible for a
developer to provide the list instead, but doing so is quite awkward
without this helper method. This is consistent for how
`DefaultExtractorsFactory` allows other aspects of the delegate
`Extractor` implementations to be customised.
* Issue: google/ExoPlayer#10175
* Issue: google/ExoPlayer#10505
#minor-release
PiperOrigin-RevId: 490214619
(cherry picked from commit ff48faec5f)
The only reason this is required at the moment is to set the
process UID field in the token, that is supposed to make it easier
for controller apps to identify the session. However, if this
visibility is not provided, it shouldn't stop us from creating
the controller for this session.
Also docuement more clearly what UID means in this context.
PiperOrigin-RevId: 490184508
(cherry picked from commit c41a5c8420)
These flags ensure that any errors cause the script to exit (instead of
just carrying on) (`-e`) and that any unrecognised substitution variables
cause an error instead of silently resolving to an empty string (`-u`).
Issues like Issue: google/ExoPlayer#10791 should be more quickly resolved with
`set -e` because the script will clearly fail with an error like
`make: command not found` which would give the user a clear pointer
towards the cause of the problem.
#minor-release
PiperOrigin-RevId: 490001419
(cherry picked from commit 45b8fb0ae1)
When we currently call SessionToken.createSessionToken with a legacy
token, we call the package manager to get the process UID. This
requires visiblity to the target package, which may not be available
unless the target runs a service known to the controller app.
However, when connecting to a Media3, this UID doesn't have to be
known, so we can move the call closer to where it's needed to
avoid the unncessary visibility check.
In addition, a legacy session may reply with unknown result code
to the session token request, which we should handle as well.
One of the constructor can be removed since it was only used from
a test.
PiperOrigin-RevId: 489917706
(cherry picked from commit 2fd4aac310)
This adds the full Builders and State representation needed to
implement all Player getter methods and listener invocations.
PiperOrigin-RevId: 489503319
(cherry picked from commit 81918d8da7)
When estimating the AudioTrack min buffer size, we must use a PCM
frame of 1 when doing direct playback (passthrough). The code was
passing -1 (C.LENGTH_UNSET).
PiperOrigin-RevId: 489238392
(cherry picked from commit 07d25bf41d)
I considered moving this enforcement inside the ExoPlayerImpl
implementation, but it might lead to app crashes in cases that apps
(incorrectly) call a released player, but it wasn't actually causing a
problem.
PiperOrigin-RevId: 489233917
(cherry picked from commit cba65c8c61)
They are called from the system only and don't need to be exported
to be visible to other apps.
PiperOrigin-RevId: 489210264
(cherry picked from commit 22ccc1a128)
* Transforms the `ListenableFuture<LibraryResult<MediaItem>>` and `ListenableFuture<LibraryResult<List<MediaItem>>>` to `ListenableFuture<MediaBrowserCompat.MediaItem>` and `ListenableFuture<List<MediaBrowserCompat.MediaItem>>`, and the result will be sent out when `ListenableFuture` the `MediaBrowserCompat.MediaItem` (or the list of it) is fulfilled.
* Add `artworkData` to the tests in `MediaBrowserCompatWithMediaLibraryServiceTest`.
PiperOrigin-RevId: 489205547
(cherry picked from commit 4ce171a3cf)
The method allows clients to specify a pre-existing thread
to use for playback. This can be used to run multiple ExoPlayer
instances on the same playback thread.
PiperOrigin-RevId: 488980749
(cherry picked from commit e1fe3120e2)
The exclusion will be used in a follow-up CL when sending PlayerInfo updates.
#minor-release
PiperOrigin-RevId: 488939258
(cherry picked from commit bae509009b)
Added new method to check if codec just functionally supports a format.
Changed getDecoderInfosSortedByFormatSupport to use new function to
order by functional support. This allows decoders that only support
functionally and are more preferred by the MediaCodecSelector to keep
their preferred position in the sorted list.
Unit tests included
-Two MediaCodecVideoRenderer tests that verify hw vs sw does not have an
effect on sort of the decoder list, it is only based on functional
support.
Issue: google/ExoPlayer#10604
PiperOrigin-RevId: 487779284
(cherry picked from commit fab66d972e)
This tag is only understood by Dackka, which is used to generate the media3 javadoc.
PiperOrigin-RevId: 489233200
(cherry picked from commit 0388631ee2)
This better matches the callback name (onSurfaceSizeChanged) and
probably cause less confusion with getVideoSize.
PiperOrigin-RevId: 488669786
(cherry picked from commit 1143edc59a)
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
(cherry picked from commit 491b13622e)
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
PiperOrigin-RevId: 488645089
(cherry picked from commit 1def68bf3c)
We currently skip this calculation entirely, but it can be added by
calculating the window duration using the wrapped window's duration
and the provided AdPlaybackState.
Issue: google/ExoPlayer#10764
PiperOrigin-RevId: 488614767
(cherry picked from commit 7a7d08343a)
The MediaControllerImplBase listener invocations currently use the
class member state that can change if one of the listener method
implementations changes the state recursively.
Updating the listener invocations to use a final local variable
ensures all listeners get consistent updates.
PiperOrigin-RevId: 487503373
(cherry picked from commit 33bea391d4)
The tests in MediaControllerCompatCallbackWithMediaSessionTest
don't follow this pattern very consistently at the moment.
PiperOrigin-RevId: 487501913
(cherry picked from commit c6a0ba25f9)
Creating the PlaybackStateCompat from a media3 Player state is done
already by the MediaSessionConnector (and used widely). The media3
session module should set the same states under the same circumstances
to ensure compatiblity and consistency.
PlaybackStateCompat changes made in media3 session:
- Use STATE_STOPPED when player is ended instead of STATE_PAUSED
- Use STATE_PLAYING when playback is suppressed temporarily.
- Set the playback speed to 0 if the player is not playing.
- Add extras for mediaId and user-set playback speed.
Part of the problem was that Player.isPlaying() was used to check
the state. Unfortunately, MockPlayer.isPlaying() is implemented in
a way that makes it hard to test these changes, because the value
is set independently of playbackState, playWhenReady and suppression
reason. To be able to write consistent, logical tests, this change
also removes the independent setting of isPlaying in MockPlayer to
align it better with a real player. This requires to update some
other tests to use alternative methods.
PiperOrigin-RevId: 487500859
(cherry picked from commit c5e071e556)
It's not clear to me why presubmit didn't catch this, I briefly
investigated but couldn't work it out - so I'm just going to fix
it and move on.
#minor-release
PiperOrigin-RevId: 487497827
(cherry picked from commit 4fcc019bbf)
The connection to a legacy MediaSession may receive additional
onSessionReady callbacks that are treated as additional state updates.
We currently also set the "notifyConnected" flag for these updates
even though we are connected already, causing an IllegalStateException.
Fix the exception by not setting this flag.
We can also remove the wording about "locked" updates since this class
operates everything on a single application thread.
Issue: androidx/media#49
PiperOrigin-RevId: 487487286
(cherry picked from commit b24161a6f6)
These aren't caught by presubmit because the classes are annotated
`@VisibleForTesting` and are therefore stripped out by Metalava. However
Metalava doesn't run when we're generating javadoc for real.
#minor-release
PiperOrigin-RevId: 487476260
(cherry picked from commit 742da7f49a)
This involves reducing the visibility of methods/constructors that
are already unusable outside the `androidx.media3.test.utils` package.
#minor-release
PiperOrigin-RevId: 487473005
(cherry picked from commit 3ab881351e)
This uses `@hide` on `protected final` methods to hide them from Dackka
javadoc generation, since these methods are inaccessible to developers
anyway. These symbols will still (currently) be included in artefacts
distributed on Maven (because we don't run Metalava as part of
generating these artefacts).
In some cases I had to change the visibility/finality of methods to make
them `protected final` before adding the `@hide` annotation (but
the impact should be very low, since most of these methods were either
already unusable by app developers, or they shouldn't have been used).
#minor-release
PiperOrigin-RevId: 487472907
(cherry picked from commit e9ddfa5336)
This makes two fixes:
1. Remove `HlsSampleStreamWrapper.Callback` (package-private) from the
list of interfaces implemented by `HlsMediaPeriod` (`public`) and
move the implementation to a private inner class instead. This avoids
Metalava complaining about a public class that inherits from a
package-private type.
2. Reduce the visibility of
`RtpPayloadFormat.isFormatSupported(MediaDescription)` from `public`
to package-private. The `MediaDescription` type is already
package-private, so this method was already unusable outside the
package.
#minor-release
PiperOrigin-RevId: 487472781
(cherry picked from commit dbfc0cc770)
This makes two types of fix:
1. Align parameter names on overridden methods where the superclass
has `@param` javadoc.
2. Use `@hide` on `protected final` methods that refer to package-private
types. This will hide these symbols from Dackka javadoc generation
but not (currently) from the artefacts distributed on Maven. These
methods are currently unusable outside their package anyway (e.g. by
external developers) because of the dependency on a package-private
type.
This also changes some HLS, SmoothStreaming, and IMA code where I've renamed
parameters of overridden methods to be consistent across the type
hierarchy.
#minor-release
PiperOrigin-RevId: 487472665
(cherry picked from commit 7905744a83)
Not setting the color info results in a missing "colr" box in the produced
container, under file/moov/trak/mdia/minf/stbl/stsd/hvc1. This means extractors
will not be able to find out the transcoded file is HDR.
In `Transformer`, this means it can't transcode this transcoded file, because
it currently relies on the container bearing HDR info to construct the
transcoding sample pipeline.
PiperOrigin-RevId: 487276712
(cherry picked from commit 3c74e076fe)
Accepting a PlayerInfo while the MediaController is masking its state
means we are reverting all masking changes we've made earlier. This
only makes sense if the update already contains the masked operation.
If multiple operations are in flight (or are sent from the session
while they are in flight), we need to wait until all of them are
handled before accepting new updates.
In cases where a new update from the session excludes the Timeline
and the masked state is incompatible with the new update, we also
risk an exception if we accept the update too early.
PiperOrigin-RevId: 487266899
(cherry picked from commit 0b4ba3e3a6)
In startTransformation method we were throwing UnsupportedEncodingException (IOException) when mediaItem with unsupported arguments is passed.
Changed this to IllegalArgumentException which seems more logical here.
PiperOrigin-RevId: 487259296
(cherry picked from commit 818bf4a20a)
This is the follow-up commit where the onEvents callback
raised by MediaController contains the missing events, for the
case where MediaController is connected to a legacy MediaSession.
#minor-release
PiperOrigin-RevId: 487231996
(cherry picked from commit c403b4ce7c)
Imported from GitHub PR Issue: google/ExoPlayer#10762
This ensure that ffmpeg error code are properly translated to values that the ExoPlayer decoder understand.
The main gain is that it allows the decoder to properly ignore more cases of invalid data and recover.
The second gain is that the other errors are now proper ExoPlayer errors and no more obscure buffer ones.
Fixes: Issue: google/ExoPlayer#10760
Merge 82ceeb77d6df71f5ffb0474db66a36fd6eb8e51a into 972e169bd8
COPYBARA_INTEGRATE_REVIEW=go/exoghi/10762 from Tolriq:ffmpeg_error_code 82ceeb77d6df71f5ffb0474db66a36fd6eb8e51a
PiperOrigin-RevId: 487189910
(cherry picked from commit a1c04cd473)
This logic is currently in the player renderers. With multi-asset, the
renderers will go into the AssetLoader, which shouldn't be responsible
for muxing.
PiperOrigin-RevId: 486860502
(cherry picked from commit 61471474c7)
Problem: We are initialising muxer as soon as we start the transformation. Now the startTransformation() method can be called from main thread, but muxer creation is an I/O operation and should be not be done on main thread.
Solution: Added lazy initialisation of muxer object. The actual transformation happens on background thread so the muxer will be initialised lazily from background thread only.
Another way was to provide an initialize() method on MuxerWrapper which will explicitly initialise muxer object but with this approach the caller need to call the initialise method before calling anything else. With current implementation the renderers are calling MuxerWrapper methods on various callbacks (Not sequentially) and also we are sharing same muxer with multiple renderers so It might become confusing for the caller on when to call the initialise() method. Also there are few methods on MuxerWrapper which dont really need muxer object. So in short it might make MuxerWrapper APIs more confusing.
Validation: Verified the transformation from demo app.
PiperOrigin-RevId: 486735787
(cherry picked from commit eb357654bb)
This should be necessary to ensure decoders see fewer errors.
Setting this resulted in removing native_dequeueOutputBuffer errors on OMX.MTK decoders for in-app tone mapping prototyping.
PiperOrigin-RevId: 486715941
(cherry picked from commit e510d9903f)
Remove static imports to Player constants to make the code more readable.
#minor-release
PiperOrigin-RevId: 486619911
(cherry picked from commit 09651ed2e3)
The method getCurrentPosition() may return a lesser position during pause than the previous retrieved value due to ipc call delay in playerInfo update. Users see track position jump backwards at pause. Fixed to return last estimated position while paused if have not received updated playerInfo. Code is deduped to point getContentPosition() to getCurrentPosition() when !isPlayingAd.
PiperOrigin-RevId: 486617341
(cherry picked from commit 9336b95bf4)
Notification buttons for next/previous should change based on the new index of the currently played media item after another media item is added or removed from a playlist.
Issue: androidx/media#130
PiperOrigin-RevId: 485869144
(cherry picked from commit 2633f37a2f)
If there's an @param javadoc tag in a supertype then all overrides
of this method that don't also override the javadoc must use the same
parameter name.
PiperOrigin-RevId: 485857711
(cherry picked from commit be7dd95692)
Remove static imports to constants and imports to intdefs, to make the
code more readable.
PiperOrigin-RevId: 485592288
(cherry picked from commit 8db6b71805)
Public methods may only refer to public types in their signature. This
change ensures that by switching to a public supertype everywhere.
PiperOrigin-RevId: 485568625
(cherry picked from commit 40b5cba3c8)
* Add `Listener` in `MediaSession` with method `onNotificationRefreshRequired(MediaSession)`.
* Add `MediaSessionService` as the listener of the `MediaSession` when `MediaSession` is added to `MediaSessionService`
* Load bitmap when update metadata in `MediaSessionLegacyStub` and call `onNotificationRefreshRequired` when bitmap asynchronously arrives.
PiperOrigin-RevId: 485376145
(cherry picked from commit 77fedd8d7d)
This root extra needs to be set by apps manually in media1 and we
can do that automatically in Media3 based on the available session
commands.
#minor-release
PiperOrigin-RevId: 484286833
(cherry picked from commit 4c9ca8fad1)
In Media3 there is the useful concept of connection hints that a
client can set when building the session and that are sent to the
service and passed to the `Callback.onConnect()` method when the
browser connects.
These connection hints are then included in the `ControllerInfo`
object that later will be passed to every callback method and the
implementor can then take decisions specific to these connection
hints.
These connection hints are not available in media1. However, when
an app creates a `MediaBrowserCompat` object, the constructor takes
a rootHint object that is sent to
`MediaBrowserServiceCompat.onGetRoot()`.
This change uses the browser rootHints as the connection hints when
creating the `ControllerInfo` for legacy browsers and makes them
available to the `MediaLibrarySession.Callback` domain methods in
the same way as connection hints of a Media3 browser.
PiperOrigin-RevId: 484220748
(cherry picked from commit 21022c77be)
This change makes adding ad events in live streams more robust by allowing ad
groups to grow in number of ads if more ad events are received than initially
announced by the SDK.
With the IMA prefetch feature, an AdPod can grow in size in certain conditions
like from initially 2 ads to 4 ads being part of the ad group. With this change,
if an additional ad event arrives while the ad group is still being played,
the ad group is expanded. If the event arrives late and the ad group is already
completed, a new group is created for the remaining ads.
This also covers the case where we join the live stream while an ad is being
played and we missed at least one LOADED event from the SDK. Ads of the group
before the first LOADED event are ignored in such a case.
PiperOrigin-RevId: 484214760
(cherry picked from commit 64e9e88823)
From ANSI-CTA-608-E R-2014 section 8.4:
> When closed captioning is used on line 21, field 2, it shall conform
> to all of the applicable specifications and recommended practices as
> defined for field 1 services with the following differences:
> 1. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x14, 0x20 to 0x14, 0x2F in field 1,
> shall be replaced with 0x15, 0x20 to 0x15, 0x2F when used in field
> 2.
> 2. The non-printing character of the miscellaneous control-character
> pairs that fall in the range of 0x1C, 0x20 to 0x1C, 0x2F in field
> 1, shall be replaced with 0x1D, 0x20 to 0x1D, 0x2F when used in
> field 2.
This basically means that `cc1=0x15` in field 2 should be interpreted as
`cc1=0x14` in field 1, and same for `0x1D -> 0x1C`.
The `isMiscCode` method above already handles this by ignoring the LSB
(the only difference between `0x14` and `0x15`, and `0x1C` and `0x1D`)
by AND-ing with `0xF6` instead of `0xF7`. This change uses the same
trick in `isServiceSwitchCommand`.
Issue: google/ExoPlayer#10666
#minor-release
PiperOrigin-RevId: 483927506
(cherry picked from commit 8c0f7827e2)
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
(cherry picked from commit 7fcb53da2d)
* Add `BitmapLoader` in `MediaSession.Builder` and `MediaLibrarySession.Builder`.
* Pass `BitmapLoader` into the constructor of `MediaSession`, `MediaSessionImpl`, `MediaLibrarySession` and `MediaLibrarySessionImpl`.
* Add an interface method `loadBitmapFromMetadata(MediaMetadata)` in `BitmapLoader`.
* Remove the reference of `BitmapLoader` in `DefaultMediaNotificationProvider`.
PiperOrigin-RevId: 483654596
(cherry picked from commit 3f69df72db)
The inner class avoids a verification failure, which can lead to slower
execution at runtime.
PiperOrigin-RevId: 483639417
(cherry picked from commit 026aea7d3d)
This is a no-op, but it's more 'correct' because it avoids any potential
sign mix-ups that come from storing an unsigned byte (with a
potentially set MSB) in a signed java byte variable.
PiperOrigin-RevId: 483409798
(cherry picked from commit c9a0aa9db0)
Although it can be useful to check the output format, it's not required or needed.
For some AudioProcessor implementations, it is stated/obvious that
the output format will match the input, in which case there is no
a need to check the return value.
#cleanup
PiperOrigin-RevId: 483403679
(cherry picked from commit 8723e74b1f)
* Add `CacheBitmapLoader`.
* Add `CacheBitmapLoaderTest`.
* Remove the `BitmapLoadRequest` and some bitmap caching logic in `DefaultMediaNotificationProvider` since we moved all of them in `CacheBitmapLoader`.
* Modify `DefaultMediaNotificationProviderTest`.
PiperOrigin-RevId: 482787445
(cherry picked from commit ca4edff1fd)
This listener will need to be passed to the MuxerWrapper to throw when
the Transformer is stuck.
PiperOrigin-RevId: 482433552
(cherry picked from commit e6d5595545)
Make it easier to support use of RGBA_101012 rather than RGBA_8888 for EGL
contexts, displays, and surfaces.
This tangentially supports adding HDR tests, by slightly simplifying the color
selection logic we'd have to add in HDR tests.
PiperOrigin-RevId: 482219428
(cherry picked from commit bb215857e5)
The reason for making the Muxer public is that we want to add an option
to disable or configure the timer that will throw when the muxer doesn't
receive any data for a given period of time.
PiperOrigin-RevId: 482199360
(cherry picked from commit cf14d0687d)
The MediaNotficationManager stops the service from the foreground
calling Service.stopForeground(boolean) which is deprecated in API 33.
This change calls Service.stopForeground(int), which was added in API
24.
#minor-release
PiperOrigin-RevId: 482190332
(cherry picked from commit 601eaba7a6)
`transformationMatrix` is not ambiguous, as there's no other local
transformationMatrix variable nearby.
PiperOrigin-RevId: 482184602
(cherry picked from commit e39826a8db)
