Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.
PiperOrigin-RevId: 470003836
(cherry picked from commit 142d1c062c)
Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.
Also, swap the OETF and EOTF in shaders, as they were used incorrectly before
Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.
PiperOrigin-RevId: 469736067
(cherry picked from commit a2139109e3)
Upstream timestamps from the decoder are also in microseconds,
so using microseconds here is consistent with that.
PiperOrigin-RevId: 468659099
(cherry picked from commit 4e7f9c575d)
Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.
More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.
PiperOrigin-RevId: 468473072
(cherry picked from commit 2c063546a1)
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
(cherry picked from commit 29208ec1ed)
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
(cherry picked from commit d3d5ffce91)
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
(cherry picked from commit 9a7fde8fde)
createSupportedTransformationRequest is more accurate than
createFallbackTransformationRequest, as a TransformationRequest will be returned
regardless of whether any fallback is applied.
PiperOrigin-RevId: 466641277
(cherry picked from commit 70972bbab0)
Previously, this feature interpreted SDR signals as HDR when called. Now, only HDR
streams are interpreted as HDR, so the javadoc should be updated. Not yet removing
this method, as there are still some loose ends to finish up (ex. PQ support, e2e
tests).
PiperOrigin-RevId: 466425738
(cherry picked from commit 2d2926b8c0)
While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.
Therefore, it's more specific to mention just that the transfer is HDR.
PiperOrigin-RevId: 466316960
(cherry picked from commit 7075f78eb2)
This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.
No functional change intended in this CL.
PiperOrigin-RevId: 466070764
(cherry picked from commit e444eaa5b7)
In the case where this check fails, the downstream frame processor chain won't be able to handle the incoming (SDR) data anyway as we've already set it up for HDR.
PiperOrigin-RevId: 465584814
(cherry picked from commit 0e99d28a79)
`requestCalculateSsim` more clearly represents the intention of the caller.
Also rephrase the javadoc to simplify it and make it more precise.
PiperOrigin-RevId: 465575578
(cherry picked from commit d90d7d3078)
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
(cherry picked from commit fe2b846552)
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
(cherry picked from commit 2fbe1bbfb3)
Format.NO_VALUE is a placeholder value for an invalid @C.ColorTransfer, used
for example when the decoder doesn't support this transfer function.
When encountering this invalid value, interpret this as COLOR_TRANSFER_SDR.
Confirmed locally that an exception is thrown when transcoding on p4head, and no exception is thrown when transcoding with this CL.
PiperOrigin-RevId: 464135080
(cherry picked from commit 1a22bcf1e5)
This will allow effects preview in ExoPlayer to use the
Effect and FrameProcessor interface (and the interfaces
they depend on) without depending on transformer or the
future effects module.
PiperOrigin-RevId: 464060047
(cherry picked from commit 06d41c2775)
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
(cherry picked from commit 44c42fef2a)
Despite unregistering the callback and clearing pending Handler
messages, the callback may still receive pending calls if they
are already triggered by the AudioTrack. Instead of asserting
that the track is correct, we should gracefully ignore stale
events.
PiperOrigin-RevId: 463851393
(cherry picked from commit 3650c2970a)
TransformationException error codes were previously tied to OpenGL
but other FrameProcessor implementations are possible. So this CL
renames the error codes.
Also, remove GL_INIT_FAILED error code, as FrameProcessor
implemenations may initialize resources on a background thread
after the factory method returns, so it's not obvious how to
distinguish between initialization failures and processing failures.
PiperOrigin-RevId: 463704902
(cherry picked from commit bac323d346)
Both are used in the public FrameProcessor interface, so they
should be public too.
PiperOrigin-RevId: 463454859
(cherry picked from commit 40e96d1534)
Just a misc nit, since I found the name a bit confusing, and figured
findEncoderWithClosestSupportedFormat might be more descriptive.
PiperOrigin-RevId: 463433646
(cherry picked from commit 324fc5d7e8)
Extract a FrameProcessor.Factory interface from GlEffectsFrameProcessor
and allow it to be customized using a setter on Transformer.Builder.
PiperOrigin-RevId: 463433438
(cherry picked from commit ecbe9a502c)
Size requires API 21. Using Pair instead will allow effects to be
used from API 18 during previewing once they are moved out of
transformer.
PiperOrigin-RevId: 463206474
(cherry picked from commit b994f8bfa0)
This is needed for applying effects to a playlist.
The effects are applied based on the presentation time of the
frame in its corresponding media item and the offset is added
back before encoding.
Each time the offset changes, end of input stream is signalled
to the texture processors. This is needed because the texture
processors can expect monotonically increasing timestamp within
the same input stream but when the offset changes, the timstamps
jump back to 0.
PiperOrigin-RevId: 462714966
(cherry picked from commit 46ab06b816)
It's always safe to ignore the result of these methods, because the
caller already has a reference to the returned value.
PiperOrigin-RevId: 462388947
(cherry picked from commit 21cab6124d)
This allows us to use BT.2020 RGB linear for intermediate shaders, which also
allows us to re-enable PeriodicVignetteProcessor, which should work properly in
linear color-spaces.
Manually tested by adding a GlEffectsWrapper, and confirming that HLG HDR editing still looks correct.
PiperOrigin-RevId: 462265821
(cherry picked from commit 1ecf1eb7bf)
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
(cherry picked from commit 1df79419d8)
Otherwise, invalid ColorInfo instances generated using faulty
MediaFormat#getInteger values could cause exceptions.
Confirmed that b/239435670 reproduces without this CL, and does not reproduce
with this CL.
PiperOrigin-RevId: 461862191
(cherry picked from commit 5533ad1713)
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
(cherry picked from commit 080db2a09b)
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
(cherry picked from commit f67c1a73f4)
This may happen when a containers' color transfer incorrectly does not match
the video's color transfer.
An example of a file with such a mismatch is the current Transformer demo HDR10
sample file.
Manually tested by confirming that no errors are emitted for SDR and HLG sample
files, and that errors are emitted for our incorrect HDR10 sample file.
PiperOrigin-RevId: 461583532
(cherry picked from commit fd046bd2f6)
- Update profile selection logic to pick an HDR-compatible profile when doing HDR editing on H.264/AVC videos.
- Handle doing the capabilities check for all MIME types that support HDR (not just H.265/HEVC).
- Fix a bug where we would pass an HDR input color format to the encoder when using tone-mapping.
- Tweak how `EncoderWrapper` works so decisions at made at construction time.
Manually tested cases:
- Transformation of an SDR video.
- Transformation of an HDR video to AVC (which triggers fallback/tone-mapping on a device that doesn't support HDR editing for AVC).
- Transformation of an HDR video with HDR editing.
PiperOrigin-RevId: 461572973
(cherry picked from commit 0db07c6791)
Also remove VideoEncoderSettings.colorProfile as there are no
concrete use cases for customizing this and it clashes with picking
the color format automatically based on SDR vs. HDR.
PiperOrigin-RevId: 460746987
(cherry picked from commit db78a87fdc)
We currently start a simple Thread to release AudioTracks
asynchronously. If many AudioTracks are released at the same
time, this may lead to OOM situations because we attempt to
create multiple new threads.
This can be improved by using a shared SingleThreadExecutor.
In the simple case of one simmultaneous release, it's exactly
the same behavior as before: create a thread and release it
as soon as it's done. For multiple simultanous releases we
get the advantage of sharing a single thread to avoid creating
more than one at the same time.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 460698942
(cherry picked from commit 1e8d163107)
`HevcConfig.parse` misreads reserved bit to determine NAL unit type. This is currently meant to be always set to 0, but could be given some kind of meaning in a future revision.
Issue: google/ExoPlayer#10366
PiperOrigin-RevId: 460487613
(cherry picked from commit 0f665fbeb8)
Some calls to handleBuffer return false while a previous
flush is still handled in the background.
Fix this by either asserting the method returns true if
we don't expect any delay, or calling it repeatedly until
it returns true (within a timeout).
PiperOrigin-RevId: 460474419
(cherry picked from commit 4289708323)
Pass the color info and HDR static metadata when configuring the decoder
using MediaFormatUtil.maybeSetColorInfo.
PiperOrigin-RevId: 460424985
(cherry picked from commit 46cd92ac1d)
This extension is needed for editing HDR input with OpenGL, as the
ExternalTextureProcessor samples raw YUV values from the
external texture for HDR and converts them to RGB itself rather than
relying on the OpenGL driver to do this automatically as for SDR.
PiperOrigin-RevId: 460424154
(cherry picked from commit 413016f7ef)
This saves an intermediate texture copy step for use-cases
where matrix transformations are the first or only effects
in the chain.
PiperOrigin-RevId: 460239403
(cherry picked from commit 0615922cb6)
- Added setter to disable this feature.
- Added accompanying tests.
- Plan to run tests on the same set of settings on H265.
PiperOrigin-RevId: 460238673
(cherry picked from commit 6e12600099)
The SDR constant also specified a color space and range, in addition to
C.COLOR_TRANSFER_SDR. However, it turns out that SDR videos may use different color
space and range values, so following prior ExoPlayer conventions to have `null`
mean "generic SDR" is preferable here.
PiperOrigin-RevId: 459296746
(cherry picked from commit 4230ea94e9)
If the input is HDR (HLG), check encoder capabilities for HDR support
and request tone-mapping to SDR during decoder configuration otherwise.
Capabilities are only checked for API 31 and above, as HDR editing is
not supported before.
As the encoder capabilities check needs to happen before selecting the
encoder to use (as this may depend on the resolution output by the
effects chain), the EncoderWrapper checks all candidate encoders
for the MIME type for HDR capabilities and only requests fallback to
SDR if none of them support it.
When the actual encoder is selected, the wrapper checks that it matches
one of the encoders is checked capabilities for.
PiperOrigin-RevId: 458511599
(cherry picked from commit 474e2f2c77)
Configure the GL shaders and encoder to take in HDR metadata.
This mostly just consists of passing the Format.colorInfo through
the VideoTranscodingSamplePipeline down to the encoder, rather than passing
the PQ-ness down to the GL step.
Due to b/237674316, this will remove HDR10+ support temporarily to introduce
support for HLG10.
Manually tested to confirm that HLG10 operations that don't affect color display
correctly after this CL with "HDR editing" in the demo checked, and continue to display incorrectly (as before this CL) without the option unchecked.
PiperOrigin-RevId: 458490810
(cherry picked from commit 53db305612)
We used "ALL_COOECS" previously, and it is not necessary because "ALL_CODECS"
additionally the codecs that support tunneling/secure decoding, which there
is no use case in Transformer.
PiperOrigin-RevId: 458470278
(cherry picked from commit 8f89eba59c)
Although MediaCodec claims supporting float frame rate, encoder init failed on
API21 Nexus 5. Since it's just a performance hint to the codec, it's OK to
generalize it to other API versions.
PiperOrigin-RevId: 458434650
(cherry picked from commit 821ab26702)
The GlEffectsFrameProcessor that will be part of the effects module
uses the DebugViewProvider. So it does not make sense for it
to be an inner interface of Transformer.
PiperOrigin-RevId: 458014932
(cherry picked from commit f41e6796ce)
The FinalMatrixTransformationProcessorWrapper ensures that the
surface is only replaced when it is not being rendered to and vice
versa.
PiperOrigin-RevId: 458007639
(cherry picked from commit e5527a8add)
The outputHeight in the TransformationRequest is the height of
the frame as it would be displayed (i.e., after applying any
rotation specified in the format). So pass-through should only
be used if the requested outputHeight matches the input
format's height after applying the rotation.
PiperOrigin-RevId: 457934867
(cherry picked from commit c74cf1f1aa)
`MetadataRenderer` is updated to output `Metadata` with its presentation time, in microseconds.
PiperOrigin-RevId: 457444718
(cherry picked from commit 6e9275c13d)
This will be useful for downgrading to a lower resolution during
a slow preview and for processing slide-shows once sequential
multi-asset editing is supported.
PiperOrigin-RevId: 457017255
(cherry picked from commit a230d59f1b)
videoEncoderFormatUnsupported_completesWithError() has recently
been flaky on API 31 emulators on presubmit because a different
exception than the expected exception is thrown.
This disables it on those emulators to reduce testing noise
until the underlying problem is investigated and resolved.
PiperOrigin-RevId: 456765512
(cherry picked from commit d9c63c1e87)
This change is just renaming. There is no functional change intended.
The FrameProcessor interface will be created in a follow-up.
PiperOrigin-RevId: 456741628
(cherry picked from commit 216fefd669)
`TextRenderer` is updated to output `CueGroup`, which contains the presentation time of the cues, in microseconds.
PiperOrigin-RevId: 456531399
(cherry picked from commit bf11a8a831)
After this change GlEffects can use any GlTextureProcessor not just
SingleFrameGlTextureProcessor.
MediaPipeProcessor now implements GlTextureProcessor directly which
allows it to reuse MediaPipe's output texture for its output texture
and avoids an extra copy shader step.
PiperOrigin-RevId: 456530718
(cherry picked from commit e25bf81195)
After this change, FrameProcessorChain chains any GlTextureProcessors
instead of only SingleFrameGlTextureProcessors.
The GlTextureProcessors are chained in a bidirectional manner using
ChainingGlTextureProcessorListener to feed input and output related
events forward and release events backwards.
PiperOrigin-RevId: 456478414
(cherry picked from commit 3a96691654)
In follow-ups the FrameProcessorChain will set an instance of this
listener for each GlTextureProcessor to chain it with its previous
and next GlTextureProcesssor.
PiperOrigin-RevId: 455628942
(cherry picked from commit c92e18ec58)
The wrapper
* catches exceptions for each task and notifies the
listener (this will be used more in follow-ups when processFrame
is split into lots of listeners and callbacks),
* removes finished tasks from the queue and signals any exceptions
that occurred to the listener each time a new task is executed.
PiperOrigin-RevId: 455345184
(cherry picked from commit bf9fa12411)
This change adds a SurfaceProvider interface which is necessary to
allow for texture processors whose output size becomes available
asynchronously in follow-ups.
VTSP's implementation of this interface wraps the encoder and provides
its input surface together with the output frame width, height, and
orientation as used for encoder configuration.
The FrameProcessorChain converts the output frames to the provided
orientation and resolution using a ScaleToFitTransformation and
Presentation replacing EncoderCompatibilityTransformation.
PiperOrigin-RevId: 455112598
(cherry picked from commit d20f684986)
to support enabling this as a compile-time error.
More information: go/lsc-extends-object
PiperOrigin-RevId: 454582570
(cherry picked from commit d2f5f212b9)
The native GL errors are in an arbitrary order according to
https://www.khronos.org/registry/OpenGL-Refpages/es2.0/xhtml/glGetError.xml
This means any of them could contain the most useful message
so it's better to use all for the GlException's message rather than
picking the last message and logging all others.
PiperOrigin-RevId: 454130460
(cherry picked from commit 92c2a304e1)
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
(cherry picked from commit 3f718b0d10)
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
(cherry picked from commit dc668f2b59)
This removes the prior restriction of needing to remember not to crop and set aspect ratio in the same Presentation.Builder, and makes each class a bit more targeted.
This is partially made feasible by the past work to merge consecutive
MatrixTransformations into a single MatrixTransformationFrameProcessor, which
ensures that there's no loss in quality between successive MatrixTransformations.
PiperOrigin-RevId: 453660582
(cherry picked from commit b33dc5e57b)
SingleFrameGlTextureProcessor is now an abstract class containing a
default implementation of the more flexible GlTextureProcessor interface
while still exposing the same simple abstract methods for single frame
processing it previously did.
FrameProcessorChain and GlEffect will be changed to use
GlTextureProcessor in follow-ups.
PiperOrigin-RevId: 453633000
(cherry picked from commit 0b37d860d1)
Implementations of this interface will be able to drop or add frames,
change timestamps, accept multiple input frames before producing
output, and process frames on their own background thread.
A default implementation of this interface will be added to SingleFrameGlTextureProcessor in a follow-up.
PiperOrigin-RevId: 453159835
(cherry picked from commit 023d19c8c5)
This internal listener avoids wrapping the TransformationExceptions
in PlaybackExceptions that are handled via the Player.Listener and
is also used for FrameProcessingExceptions which already avoided
the PlaybackException layer previously.
This listener will also be useful in follow-ups for encoder-related
TransformationExceptions that are thrown in the SurfaceProvider that
will be called on the GL thread.
PiperOrigin-RevId: 452074575
(cherry picked from commit 960422e36f)
Once the more advanced GlTextureProcessor interface exists,
it will be possible to change the output size of a GlTextureProcessor
between frames. To keep the re-configuration based on the frame sizes
minimal, things indepedent of the frame size, such as the GlProgram,
can be initialized in the constructor.
PiperOrigin-RevId: 451997584
(cherry picked from commit 54d44d38b6)
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
#minor-release
PiperOrigin-RevId: 460721541
(cherry picked from commit 6be0d6ea25)
I don't think it's useful to keep these in numerical order, it makes
more sense to keep them grouped into a 'logical' ordering.
#minor-release
PiperOrigin-RevId: 460453464
(cherry picked from commit 1b1e0f890d)
We wait until a previous AudioTrack has been released before
creating a new one. This is currently done with a thread
block operation, which may cause ANRs in the extreme case
when someone attempts to release the player while this is
still blocked.
The problem can be avoided by just returning false from
DefaultAudioSink.handleBuffer to try again until the previous
AudioTrack is released.
Reproduction steps to force the issue:
1. Add Thread.sleep(10000); to the AudioTrack release thread.
2. Add this to the demo app:
private int positionMs = 0;
Handler handler = new Handler();
handler.post(new Runnable() {
@Override
public void run() {
player.seekTo(positionMs++);
if (positionMs == 10) {
player.release();
} else {
handler.postDelayed(this, 1000);
}
}
3. Observe Player release timeout exception.
These steps can't be easily captured in a unit test as we can't
artifically delay the AudioTrack release from the test.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 459468912
(cherry picked from commit a80dd60449)
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
(cherry picked from commit 577e19168d)
As per MP4 spec, bitrates in esds boxes can be a 32 bit number which doesn't fits in Java int type, so now reading it as a long value. Our class for holding media format, only allows bitrates value to be an int as we don't expect the bitrates to be greater than or equal to 2^31. So we're limiting the values for bitrates to Integer.MAX_VALUE.
#minor-release
PiperOrigin-RevId: 458423162
(cherry picked from commit 9e10286b5e)
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
(cherry picked from commit 5c7ec13e85)
NoUidTimeline still exists as a private detail of TestUtil, but it no
longer extends ForwardingTimeline because the interactions are quite
hard to reason about.
#minor-release
PiperOrigin-RevId: 457703593
(cherry picked from commit 292f6de630)
1. The offloadSchedulingEnabled value doesn't need to be in
PlaybackInfo because it's never updated in EPII.
2. The sleepingForOffload value in EPII wasn't updated explicitly
(just via the return value of a method). It was also only
meant to be enabled while the player is actively playing, but
confusingly triggered from a path where the player may
theoretically be buffering as well.
3. The offload sleeping (=not scheduling doSomeWork) was interwoven
into the actual scheduling code making it slightly hard to follow.
This can be improved slightly by keeping the offload sleeping
decision and the scheduling separate.
PiperOrigin-RevId: 457427293
(cherry picked from commit aedde2de39)
The offload sleeping stops as soon as a new DO_SOME_WORK message
is handled (because this indicates an expected change in rendering
and we want to stop sleeping until we know it's safe to do so).
Every exit path from doSomeWork needs to clear other pending
DO_SOME_WORK messages as these requests have already been handled by
the current method invocation. This currently doesn't happen from the
offload sleeping return path and a previously queued DO_SOME_WORK
message can immediately wake up the rendering loop again.
Fix this by moving the message removal to the beginning of the
doSomeWork method (as it prevents forgetting it in one of the
exit paths later).
PiperOrigin-RevId: 456259715
(cherry picked from commit 251389d744)
The API 32 SDK has incorrect versioning metadata for Spatializer. It
reports the whole class has only been present since API 33 (which is
surely impossible given it's present in the API 32 SDK):
https://issuetracker.google.com/234009300
The metadata seems to be correct in the API 33 SDK, so this baseline
will no longer be needed when we bump to `compileSdkVersion = 33`.
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
(cherry picked from commit 495480a66a)
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
(cherry picked from commit 0ed53215c2)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit c736a72c75)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit 9f3c595e02)
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
(cherry picked from commit 917484100d)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 2056152824)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit b3b57bc93d)
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
(cherry picked from commit a056f08a3d)
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
(cherry picked from commit 881622385d)
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
(cherry picked from commit 97210b5aa0)
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
(cherry picked from commit b6b282672c)
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).
PiperOrigin-RevId: 451857093
ExoPlayer applies a large time offset to buffers so that, if the input has negative timestamps, generally buffers seen by the decoders should have positive timestamps. Modify how the offset is handled in `Transformer` so that decoders and encoders generally see positive timestamps, by leaving the offset on samples when reading them in the base renderer (remove the code that removed the offset), and then removing the offset when muxing. Also update the frame processor chain and slow motion flattening code to retain the existing behavior after this change (these both need original media presentation timestamps)
Tested via existing end-to-end tests and manually verified that the overlay frame processor shows the expected original media timestamps.
Aside: we don't need the same logic as ExoPlayer to track stream offsets across the decoder yet, because we don't try to handle stream changes during playback in single asset editing. (There is an edge case of multi-period DASH that may not work but I doubt anyone will use that as input to `Transformer` before we change the code to handle multi-asset properly.) In future we should try to refactor interaction with the decoder to use the same code for Transformer and ExoPlayer.
PiperOrigin-RevId: 451846055
Most devices won't support 8k decoding, so they'll skip this test entirely.
As the video is quite short, this test shouldn't be any longer than the nearby,
long-running 4k60 test.
PiperOrigin-RevId: 451423368
Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
SSIM calculation requires the input and output dimensions to be identical.
For devices that can't encode the input dimensions, skip SSIM calculations and
log the cause. Only apply this on tests where the encoder may not support the
input file dimensions.
PiperOrigin-RevId: 451364904
Decode-only video frames (needed when the frame at / first frame after the
clipping start is not a key frame) need to be decoded but not passed to
the frame processor chain or encoder.
The clipping start offset needs to be removed from the frame timestamps
in the passthrough and video pipelines.
There are no changes needed for this in the audio pipeline, as it doesn't
use the input timestamps -- it uses its own timestamps derived from the
buffer sizes instead.
Also add demo option to try this out.
#minor-release
PiperOrigin-RevId: 451353609
Also update names of implementations to match design doc.
In follow-ups, SingleFrameGlTextureProcessor will become
an abstract implementation of a new GlTextureProcessor
interface.
Texture processor makes sense as it processes OpenGL textures.
The term frame processor will be used for something else in
follow-ups.
PiperOrigin-RevId: 451142085
* Rename (via deprecation)
`MediaItem.DrmConfiguration.Builder#forceSessionsForAudioAndVideoTracks`
to `setForceSessionsForAudioAndVideoTracks`. This is more consistent
with existing 'force' method names both in this class and in
`TrackSelectionParameters.Builder`.
* Add missing `@Nullable` annotation to the parameter for
`MediaItem.SubtitleConfiguration.Builder#setMimeType`. This annotation
is already present on the `MediaItem.SubtitleConfiguration#mimeType`
field that this setter corresponds to.
PiperOrigin-RevId: 450941336
There is a problem with the ImageReader formats used by the
SSIM helper that only occurs for Nexus 5 API 21, so as a workaround
we can skip the SSIM calculation on Nexus 5 API 21.
This skips just the SSIM calculation (by setting the value to
1.0 instead and logging). The tests still run when SSIM is skipped
so that we can detect other failures.
PiperOrigin-RevId: 450903183
This value is only needed by subclasses of `Rating`, all of which are
in this package (the `Rating` constructor is already package-private to
ensure this).
PiperOrigin-RevId: 450886872
*** Original commit ***
Rollback of 57182ac7bd
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...
***
PiperOrigin-RevId: 450453325
AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.
It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.
In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.
Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.
This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.
PiperOrigin-RevId: 450431146
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
******
PiperOrigin-RevId: 450410833
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
Follow-up to 57182ac7bd
PiperOrigin-RevId: 450395941
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450386627
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
The debug surface view's output surface can become invalid during a transformation due to the parent activity pausing, for example. This can currently cause a crash when backing out of the `TransformerActivity` in the demo because the surface can be destroyed before the transformer has fully canceled.
Also clarify naming of the outputSurface and inline the private method that created `EGLSurface`s (it was shorter after removing the debug preview).
PiperOrigin-RevId: 449963440
This causes a bug where the forwarded selections are no longer
assumed equal and the child MediaPeriods will think they need
to reset streams even though the selection stayed the same.
Issue: Issue: google/ExoPlayer#10248
PiperOrigin-RevId: 449454038
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
The old reference was just for prototyping HDR. The new reference is for planned work to use the correct formats for input and output for HDR editing in GL.
PiperOrigin-RevId: 449211792
The MMWAVE constant was deprecated in favour of a new constant
with a better name. Thus, we need to check for both constants now.
PiperOrigin-RevId: 449018959
This is an individual language (ISO 639-3) part of the Arabic
macrolanguage ("ar" in ISO 639-1). Add this mapping to our
existing list similar to other individual to macrolanguage
mappings we have already.
Issue: Issue: google/ExoPlayer#10255
PiperOrigin-RevId: 448911950
When using a MatrixTransformationFrameProcessor per transformation
matrix, each frame processor's shader applies the matrix to the
vertices and clips the result to the NDC range when drawing the
output frame.
This change combines consecutive MatrixTransformations into a single
MatrixTransformationFrameProcessor by multiplying the individual
matrices while updating and clipping the visible polygon after
each matrix and mapping the resulting visible polygon back to the
input space so that its vertices and the combined transformation
matrix can be used in the shader.
PiperOrigin-RevId: 448521068
Network type detection on these API levels couldn't be tested
yet because of a missing Robolectric feature. This was fixed by
the recent Robolectric upgrade and the restrictions can be removed.
This also requires to replicate the platform hack we rely on on
these API levels.
PiperOrigin-RevId: 448240431
Some RTP foramts are statically assigned, so they don't have the rtpmap
attribute. Create the missing rtpmap attribute in this case.
PiperOrigin-RevId: 448239724
This listener replaces
FrameProcessorChain#getAndRethrowBackgroundExceptions.
The listener uses a new exception type FrameProcessingException
separate from TransformationException as the frame processing
components will be made reusable outside of transformer soon.
PiperOrigin-RevId: 447455746
This constant is used for https://docs.gl/es2/glVertexAttribPointer
which takes the number of components per generic vertex attribute
(meaning the size of the individual coordinate vectors here) not the
number of attributes (the number of vertices that the old constant
name referred to).
PiperOrigin-RevId: 447427241
Before this change, we list the formats for which we don't
want transcoding. This change disables transcoding altogether.
This was tested by checking that transcoding takes place on a
short camera recording only when the added flag is not present
(and AndroidManifest does not declare support for HEVC).
PiperOrigin-RevId: 446986580
We won't try to provide/rethrow helpful error messages that are already
provided by GL, as this sort of task would expand into writing a GL verifier.
A Gl verifier is unnecessarily complex for minimal payoff, especially as Apps
expected to read GL error messages would mostly be those writing custom
GlFrameProcessors, who should be already be familiar with reading GL error
messages anyways.
PiperOrigin-RevId: 446950837
ScaleToFitFrameProcessor, PresentationFrameProcessor,
and EncoderCompatibilityFrameProcessor now each implement
MatrixTransformation instead of wrapping
MatrixTransformationFrameProcessor.
PiperOrigin-RevId: 446480286
