Extract a FrameProcessor.Factory interface from GlEffectsFrameProcessor
and allow it to be customized using a setter on Transformer.Builder.
PiperOrigin-RevId: 463433438
Size requires API 21. Using Pair instead will allow effects to be
used from API 18 during previewing once they are moved out of
transformer.
PiperOrigin-RevId: 463206474
This is needed for applying effects to a playlist.
The effects are applied based on the presentation time of the
frame in its corresponding media item and the offset is added
back before encoding.
Each time the offset changes, end of input stream is signalled
to the texture processors. This is needed because the texture
processors can expect monotonically increasing timestamp within
the same input stream but when the offset changes, the timstamps
jump back to 0.
PiperOrigin-RevId: 462714966
The DefaultMediaNotificationProvider caches the last loaded artwork
bitmap so that the bitmap isn't loaded again when the notification is
updated, e.g., the player is transiting from playing to paused. However,
loading bitmap requests for bitmaps that are already being loaded are
not suppressed. For example, if the notification is updated while the
artwork is still downloading, the same artwork might be downloaded
multiple times.
This change suppresses a bitmap load request if the same artwork is
still being loaded, to avoid additional artwork downloads.
#minor-release
PiperOrigin-RevId: 462572221
We currently clear all pending messages, including the one that flushes
pending commands to the MediaSession. To ensure all commands that have
been called before controller.release() are still sent, we can manually
trigger the flush message from the release call.
Related to handling the final flush because disconnecting the controller,
MediaSessionStub didn't post the removal of the controller to the
session thread, creating a race condition between removing the controller
and actually handling the flush.
Issue: androidx/media#99
PiperOrigin-RevId: 462342860
These constructors are currently very intertwined, passing `this`
references from the constructor of one to the constructor of another
before the first constructor is complete (and so the `this` reference
isn't really valid yet).
This change uses checker framework `@UnderInitialization` and
`@NotOnlyInitialized` annotations to make it more clear that the
references are not available yet. For the one 'direct' access needed
in the second constructor (calling `getApplicationLooper()`) we now
pass the `applicationLooper` directly alongside (to avoid needing to
dereference the reference 'too early').
This change also ensures that where a class hierarchy has a
'dependent' class hierarchy, the 'subclass' instance is always used
(by both subclass and superclass) without casting or manually hiding
the superclass field, by defining an overridable `getFoo()` method
instead and always using it.
#minor-release
PiperOrigin-RevId: 462335043
This allows us to use BT.2020 RGB linear for intermediate shaders, which also
allows us to re-enable PeriodicVignetteProcessor, which should work properly in
linear color-spaces.
Manually tested by adding a GlEffectsWrapper, and confirming that HLG HDR editing still looks correct.
PiperOrigin-RevId: 462265821
"seq" is not a well-defined abbreviation and the value is
also an integer, so sequenceNumber is better than just sequence.
PiperOrigin-RevId: 462129581
Add a Builder to constructor DefaultMediaNotificationProvider. The
Builder can also set the provider's:
- notification ID
- notification channel ID
- notification channel name
The change adds an API for apps to set the small icon in notifications.
#minor-release
Issue: androidx/media#104
PiperOrigin-RevId: 462111536
Some commands are run asynchronously and subsequent commands need
to wait until the previous one finished. This can be supported
by returning a Future for each command and using the existing
command execution logic to wait for each Future to complete.
As some MediaSessionStub code is now executed delayed to when it
was originally created, we also need to check if the session is
not released before triggering any actions or sending result codes.
Issue: androidx/media#85
PiperOrigin-RevId: 462101136
The commands currently use a task and a postTask that are chained
together manually. In some cases, e.g. when adding MediaItems,
the postTask is already a chain of commands in itself.
To allow using the entire command handling as a single task
(for simplified queueing), we can change the implementation to
always create a single task. If multiple subtasks need to be
chained together, we can do that by wrapping the method calls.
In case a task is asynchronous, we can also use Futures to
chain them together.
Overall, this is just a refactoring and changes no logic.
Issue: androidx/media#85
PiperOrigin-RevId: 462085724
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
Otherwise, invalid ColorInfo instances generated using faulty
MediaFormat#getInteger values could cause exceptions.
Confirmed that b/239435670 reproduces without this CL, and does not reproduce
with this CL.
PiperOrigin-RevId: 461862191
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
Some commands may be asynchronous and subsequent commands need to
wait for them to complete before running. This change updates the
queue to use (and listen to) Futures instead of calling Runnables
directly. The commands are currently still added as Runanbles
though, so this change is a no-op.
Also moves the permission check in MediaSessionImpl to before
queueing the command because the permission should be check at
the time of calling the method.
When executing the comamnds in the queue, we need to be careful
to avoid recursion in the same thread (which happens when both
the Future is immediate and running on the correct thread already).
To avoid recursion, we detect this case and loop the commands
instead.
Issue: androidx/media#85
PiperOrigin-RevId: 461827264
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
This may happen when a containers' color transfer incorrectly does not match
the video's color transfer.
An example of a file with such a mismatch is the current Transformer demo HDR10
sample file.
Manually tested by confirming that no errors are emitted for SDR and HLG sample
files, and that errors are emitted for our incorrect HDR10 sample file.
PiperOrigin-RevId: 461583532
After this change the current tracks are sent to the controller as part of
`PlayerInfo` and call `Listener.onTracksChanged()` in case of a change in tracks.
PiperOrigin-RevId: 461578695
- Update profile selection logic to pick an HDR-compatible profile when doing HDR editing on H.264/AVC videos.
- Handle doing the capabilities check for all MIME types that support HDR (not just H.265/HEVC).
- Fix a bug where we would pass an HDR input color format to the encoder when using tone-mapping.
- Tweak how `EncoderWrapper` works so decisions at made at construction time.
Manually tested cases:
- Transformation of an SDR video.
- Transformation of an HDR video to AVC (which triggers fallback/tone-mapping on a device that doesn't support HDR editing for AVC).
- Transformation of an HDR video with HDR editing.
PiperOrigin-RevId: 461572973
This change is done to keep the frame data unchanged.
RtpH263Reader changes the header data in input, so to send the same
RTP packet across multiple tests, each test copies the frame data
into a new packet and sends that to the reader.
Earlier, the consume method of RtpH263Reader was changing the bytes of the
input bitstream during header parse. This commit copies the input into
local context and changes the local variable as per the specifications
thus keeping the input constant.
Also remove VideoEncoderSettings.colorProfile as there are no
concrete use cases for customizing this and it clashes with picking
the color format automatically based on SDR vs. HDR.
PiperOrigin-RevId: 460746987
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
#minor-release
PiperOrigin-RevId: 460721541
We currently start a simple Thread to release AudioTracks
asynchronously. If many AudioTracks are released at the same
time, this may lead to OOM situations because we attempt to
create multiple new threads.
This can be improved by using a shared SingleThreadExecutor.
In the simple case of one simmultaneous release, it's exactly
the same behavior as before: create a thread and release it
as soon as it's done. For multiple simultanous releases we
get the advantage of sharing a single thread to avoid creating
more than one at the same time.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 460698942
Leaving the media item that has been passed in unchanged, ensures that the
media item in the timeline is equal to the media item that the user has
passed into the player. The value of the tag is the uid of the window,
meaning this is redundant information.
#minor-release
PiperOrigin-RevId: 460542246
`HevcConfig.parse` misreads reserved bit to determine NAL unit type. This is currently meant to be always set to 0, but could be given some kind of meaning in a future revision.
Issue: google/ExoPlayer#10366
PiperOrigin-RevId: 460487613
Some calls to handleBuffer return false while a previous
flush is still handled in the background.
Fix this by either asserting the method returns true if
we don't expect any delay, or calling it repeatedly until
it returns true (within a timeout).
PiperOrigin-RevId: 460474419
I don't think it's useful to keep these in numerical order, it makes
more sense to keep them grouped into a 'logical' ordering.
#minor-release
PiperOrigin-RevId: 460453464
This extension is needed for editing HDR input with OpenGL, as the
ExternalTextureProcessor samples raw YUV values from the
external texture for HDR and converts them to RGB itself rather than
relying on the OpenGL driver to do this automatically as for SDR.
PiperOrigin-RevId: 460424154
The media item needs to be assigned to `Window.mediaItem` in `CastTimeline.setWindow`. For this the `MediaItem` needs to be available in the timeline.
When a `MediaItem` is passed to the `set/addMediaItems` method, we can't yet know the Cast `MediaQueueItem.itemId` that is generated on the device and arrives with an async update of the `RemoteMediaClient` state. Hence in the `CastTimelineTracker`, we need to store the `MediaItem` by Casts's `MediaItem.contentId`. When we then receive the updated queue, we look the media item up by the content ID to augment the `ItemData` that is available in the `CastTimeline`.
Issue: androidx/media#25
Issue: google/ExoPlayer#8212
#minor-release
PiperOrigin-RevId: 460325235
This saves an intermediate texture copy step for use-cases
where matrix transformations are the first or only effects
in the chain.
PiperOrigin-RevId: 460239403
- Added setter to disable this feature.
- Added accompanying tests.
- Plan to run tests on the same set of settings on H265.
PiperOrigin-RevId: 460238673
We wait until a previous AudioTrack has been released before
creating a new one. This is currently done with a thread
block operation, which may cause ANRs in the extreme case
when someone attempts to release the player while this is
still blocked.
The problem can be avoided by just returning false from
DefaultAudioSink.handleBuffer to try again until the previous
AudioTrack is released.
Reproduction steps to force the issue:
1. Add Thread.sleep(10000); to the AudioTrack release thread.
2. Add this to the demo app:
private int positionMs = 0;
Handler handler = new Handler();
handler.post(new Runnable() {
@Override
public void run() {
player.seekTo(positionMs++);
if (positionMs == 10) {
player.release();
} else {
handler.postDelayed(this, 1000);
}
}
3. Observe Player release timeout exception.
These steps can't be easily captured in a unit test as we can't
artifically delay the AudioTrack release from the test.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 459468912
The SDR constant also specified a color space and range, in addition to
C.COLOR_TRANSFER_SDR. However, it turns out that SDR videos may use different color
space and range values, so following prior ExoPlayer conventions to have `null`
mean "generic SDR" is preferable here.
PiperOrigin-RevId: 459296746
This is to be consistent with what cast `QueueMediaItem` is doing. If a contentId is
not available the contentUrl is used as the ID.
#minor-release
PiperOrigin-RevId: 459133323
Update VP8 header to check if the S bit is set.
Variable fragmentedSampleSizeBytes is initialised with -1, and reader
is directly adding fragmentSize to this variable.
Updated it to check if the size is unset.
Bug: 238153477
Test: manual
Change-Id: I9d5735422a4a0eeb2967af93809b879b434e3c57
If the input is HDR (HLG), check encoder capabilities for HDR support
and request tone-mapping to SDR during decoder configuration otherwise.
Capabilities are only checked for API 31 and above, as HDR editing is
not supported before.
As the encoder capabilities check needs to happen before selecting the
encoder to use (as this may depend on the resolution output by the
effects chain), the EncoderWrapper checks all candidate encoders
for the MIME type for HDR capabilities and only requests fallback to
SDR if none of them support it.
When the actual encoder is selected, the wrapper checks that it matches
one of the encoders is checked capabilities for.
PiperOrigin-RevId: 458511599
Configure the GL shaders and encoder to take in HDR metadata.
This mostly just consists of passing the Format.colorInfo through
the VideoTranscodingSamplePipeline down to the encoder, rather than passing
the PQ-ness down to the GL step.
Due to b/237674316, this will remove HDR10+ support temporarily to introduce
support for HLG10.
Manually tested to confirm that HLG10 operations that don't affect color display
correctly after this CL with "HDR editing" in the demo checked, and continue to display incorrectly (as before this CL) without the option unchecked.
PiperOrigin-RevId: 458490810
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
We used "ALL_COOECS" previously, and it is not necessary because "ALL_CODECS"
additionally the codecs that support tunneling/secure decoding, which there
is no use case in Transformer.
PiperOrigin-RevId: 458470278
Although MediaCodec claims supporting float frame rate, encoder init failed on
API21 Nexus 5. Since it's just a performance hint to the codec, it's OK to
generalize it to other API versions.
PiperOrigin-RevId: 458434650
- Improve variable naming to include time units for clarity
- Fix existing timestamp calculations to respect time units as well as track tempo (default values for now)
- Ensure the synthesizer produces PCM for the correct amount of time (including gaps between commands).
PiperOrigin-RevId: 458428243
As per MP4 spec, bitrates in esds boxes can be a 32 bit number which doesn't fits in Java int type, so now reading it as a long value. Our class for holding media format, only allows bitrates value to be an int as we don't expect the bitrates to be greater than or equal to 2^31. So we're limiting the values for bitrates to Integer.MAX_VALUE.
#minor-release
PiperOrigin-RevId: 458423162
The GlEffectsFrameProcessor that will be part of the effects module
uses the DebugViewProvider. So it does not make sense for it
to be an inner interface of Transformer.
PiperOrigin-RevId: 458014932
The FinalMatrixTransformationProcessorWrapper ensures that the
surface is only replaced when it is not being rendered to and vice
versa.
PiperOrigin-RevId: 458007639
The outputHeight in the TransformationRequest is the height of
the frame as it would be displayed (i.e., after applying any
rotation specified in the format). So pass-through should only
be used if the requested outputHeight matches the input
format's height after applying the rotation.
PiperOrigin-RevId: 457934867
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
NoUidTimeline still exists as a private detail of TestUtil, but it no
longer extends ForwardingTimeline because the interactions are quite
hard to reason about.
#minor-release
PiperOrigin-RevId: 457703593
1. The offloadSchedulingEnabled value doesn't need to be in
PlaybackInfo because it's never updated in EPII.
2. The sleepingForOffload value in EPII wasn't updated explicitly
(just via the return value of a method). It was also only
meant to be enabled while the player is actively playing, but
confusingly triggered from a path where the player may
theoretically be buffering as well.
3. The offload sleeping (=not scheduling doSomeWork) was interwoven
into the actual scheduling code making it slightly hard to follow.
This can be improved slightly by keeping the offload sleeping
decision and the scheduling separate.
PiperOrigin-RevId: 457427293
This will be useful for downgrading to a lower resolution during
a slow preview and for processing slide-shows once sequential
multi-asset editing is supported.
PiperOrigin-RevId: 457017255
- Corrected trackEventBytes traversal in TrackChunk where the array position marker was not incremented properly, leading to duplicate sample output.
- Amended TrackEvent "Meta Event" parsing to account for the length of variable length bytes.
- Fixed a bug with TrackEvent message parsing where message data was parsed incorrectly due to miscalculated length.
PiperOrigin-RevId: 456967968
videoEncoderFormatUnsupported_completesWithError() has recently
been flaky on API 31 emulators on presubmit because a different
exception than the expected exception is thrown.
This disables it on those emulators to reduce testing noise
until the underlying problem is investigated and resolved.
PiperOrigin-RevId: 456765512
This change is just renaming. There is no functional change intended.
The FrameProcessor interface will be created in a follow-up.
PiperOrigin-RevId: 456741628
After this change GlEffects can use any GlTextureProcessor not just
SingleFrameGlTextureProcessor.
MediaPipeProcessor now implements GlTextureProcessor directly which
allows it to reuse MediaPipe's output texture for its output texture
and avoids an extra copy shader step.
PiperOrigin-RevId: 456530718
After this change, FrameProcessorChain chains any GlTextureProcessors
instead of only SingleFrameGlTextureProcessors.
The GlTextureProcessors are chained in a bidirectional manner using
ChainingGlTextureProcessorListener to feed input and output related
events forward and release events backwards.
PiperOrigin-RevId: 456478414
The offload sleeping stops as soon as a new DO_SOME_WORK message
is handled (because this indicates an expected change in rendering
and we want to stop sleeping until we know it's safe to do so).
Every exit path from doSomeWork needs to clear other pending
DO_SOME_WORK messages as these requests have already been handled by
the current method invocation. This currently doesn't happen from the
offload sleeping return path and a previously queued DO_SOME_WORK
message can immediately wake up the rendering loop again.
Fix this by moving the message removal to the beginning of the
doSomeWork method (as it prevents forgetting it in one of the
exit paths later).
PiperOrigin-RevId: 456259715
In follow-ups the FrameProcessorChain will set an instance of this
listener for each GlTextureProcessor to chain it with its previous
and next GlTextureProcesssor.
PiperOrigin-RevId: 455628942
The API 32 SDK has incorrect versioning metadata for Spatializer. It
reports the whole class has only been present since API 33 (which is
surely impossible given it's present in the API 32 SDK):
https://issuetracker.google.com/234009300
The metadata seems to be correct in the API 33 SDK, so this baseline
will no longer be needed when we bump to `compileSdkVersion = 33`.
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
(cherry picked from commit 61ab75b8b8)
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
The wrapper
* catches exceptions for each task and notifies the
listener (this will be used more in follow-ups when processFrame
is split into lots of listeners and callbacks),
* removes finished tasks from the queue and signals any exceptions
that occurred to the listener each time a new task is executed.
PiperOrigin-RevId: 455345184
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
PiperOrigin-RevId: 455115567
(cherry picked from commit 21d4e85817)
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
(cherry picked from commit b475f1f2da)
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
#minor-release
PiperOrigin-RevId: 455115567
This change adds a SurfaceProvider interface which is necessary to
allow for texture processors whose output size becomes available
asynchronously in follow-ups.
VTSP's implementation of this interface wraps the encoder and provides
its input surface together with the output frame width, height, and
orientation as used for encoder configuration.
The FrameProcessorChain converts the output frames to the provided
orientation and resolution using a ScaleToFitTransformation and
Presentation replacing EncoderCompatibilityTransformation.
PiperOrigin-RevId: 455112598
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
- Fixed MidiExtractor state issues which caused seeking to behave unexpectedly. Ensures the extractor is now always in the file loading state after returning RESULT_END_OF_INPUT.
- Fixed an infinite loop in MidiExtractor caused by the file data array having an initial size of 0. The extractor attempted to increase the capacity of the array by using this size of 0 in it's calculations.
PiperOrigin-RevId: 455107511
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
(cherry picked from commit e8bcdf437e)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit 222faa96d0)
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
The native GL errors are in an arbitrary order according to
https://www.khronos.org/registry/OpenGL-Refpages/es2.0/xhtml/glGetError.xml
This means any of them could contain the most useful message
so it's better to use all for the GlException's message rather than
picking the last message and logging all others.
PiperOrigin-RevId: 454130460
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit e2f0fd7673)
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
(cherry picked from commit 9221eeb2d8)
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
(cherry picked from commit 8b592fc77a)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08)
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
(cherry picked from commit d506c709c9)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit 8697338233)
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
(cherry picked from commit bd126ec5c5)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
This removes the prior restriction of needing to remember not to crop and set aspect ratio in the same Presentation.Builder, and makes each class a bit more targeted.
This is partially made feasible by the past work to merge consecutive
MatrixTransformations into a single MatrixTransformationFrameProcessor, which
ensures that there's no loss in quality between successive MatrixTransformations.
PiperOrigin-RevId: 453660582
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
SingleFrameGlTextureProcessor is now an abstract class containing a
default implementation of the more flexible GlTextureProcessor interface
while still exposing the same simple abstract methods for single frame
processing it previously did.
FrameProcessorChain and GlEffect will be changed to use
GlTextureProcessor in follow-ups.
PiperOrigin-RevId: 453633000
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
(cherry picked from commit 814e43dbb9)
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
(cherry picked from commit 247c2d845d)
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
(cherry picked from commit 39674bec78)
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
This change makes MediaSessionPermissionTest.removeMediaItems()
non-flaky. This is a quick fix though it'd be good to refactor this
test file.
PiperOrigin-RevId: 453162764
Implementations of this interface will be able to drop or add frames,
change timestamps, accept multiple input frames before producing
output, and process frames on their own background thread.
A default implementation of this interface will be added to SingleFrameGlTextureProcessor in a follow-up.
PiperOrigin-RevId: 453159835
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
This internal listener avoids wrapping the TransformationExceptions
in PlaybackExceptions that are handled via the Player.Listener and
is also used for FrameProcessingExceptions which already avoided
the PlaybackException layer previously.
This listener will also be useful in follow-ups for encoder-related
TransformationExceptions that are thrown in the SurfaceProvider that
will be called on the GL thread.
PiperOrigin-RevId: 452074575
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
(cherry picked from commit 1282175808)
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
Once the more advanced GlTextureProcessor interface exists,
it will be possible to change the output size of a GlTextureProcessor
between frames. To keep the re-configuration based on the frame sizes
minimal, things indepedent of the frame size, such as the GlProgram,
can be initialized in the constructor.
PiperOrigin-RevId: 451997584
This provides an (unstable) API for apps to broadcast session extras
Bundle to all connected controllers and set the extras in the legacy
session.
Similar to the custom layout, the extras Bundle is not part of the
Media3 session state. This means that when a Media3 controller
connects to the session after the broadcast, the extras needs to be
sent to that controller in `MediaSession.Callback.onPostConnect(MediaSession session, ControllerInfo controller)`.
PiperOrigin-RevId: 451871731
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
The MediaItemFiller is not flexible enough for most realworld usages
because:
- it doesn't allow asynchronous resolution of MediaItems (e.g. to
look up URIs from a database)
- it doesn't allow to batch updates for multiple items or do more
advanced customizations (e.g. expanding a mediaId representing
a playlist to multiple items).
Both issues can be solved by passing in a list of items and
returning a ListenableFuture. The callback itself can also move
into MediaSession.Callback for consistency with the other
callbacks.
PiperOrigin-RevId: 451857319
The MockPlayer currently:
- uses separate fields for single mediaItem vs multiple mediaItems
- replaces all items on addMediaItem operations
- does nothing on remove/move operations.
Fix all of this by using a single field that replicates the player
operations directly.
Some tests also need to be updated to make them more realistic
(for example only removing items from a playlist that have
previously been added).
PiperOrigin-RevId: 451857271
In some cases it's helpful to have access to the session
(e.g. to get the PlayerWrapper) from within the PostSessionTask
implementations. This change forwards the existing sessionImpl
instance to all these callbacks.
PiperOrigin-RevId: 451857191
These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).
PiperOrigin-RevId: 451857093
ExoPlayer applies a large time offset to buffers so that, if the input has negative timestamps, generally buffers seen by the decoders should have positive timestamps. Modify how the offset is handled in `Transformer` so that decoders and encoders generally see positive timestamps, by leaving the offset on samples when reading them in the base renderer (remove the code that removed the offset), and then removing the offset when muxing. Also update the frame processor chain and slow motion flattening code to retain the existing behavior after this change (these both need original media presentation timestamps)
Tested via existing end-to-end tests and manually verified that the overlay frame processor shows the expected original media timestamps.
Aside: we don't need the same logic as ExoPlayer to track stream offsets across the decoder yet, because we don't try to handle stream changes during playback in single asset editing. (There is an edge case of multi-period DASH that may not work but I doubt anyone will use that as input to `Transformer` before we change the code to handle multi-asset properly.) In future we should try to refactor interaction with the decoder to use the same code for Transformer and ExoPlayer.
PiperOrigin-RevId: 451846055
Most devices won't support 8k decoding, so they'll skip this test entirely.
As the video is quite short, this test shouldn't be any longer than the nearby,
long-running 4k60 test.
PiperOrigin-RevId: 451423368
Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
SSIM calculation requires the input and output dimensions to be identical.
For devices that can't encode the input dimensions, skip SSIM calculations and
log the cause. Only apply this on tests where the encoder may not support the
input file dimensions.
PiperOrigin-RevId: 451364904
Decode-only video frames (needed when the frame at / first frame after the
clipping start is not a key frame) need to be decoded but not passed to
the frame processor chain or encoder.
The clipping start offset needs to be removed from the frame timestamps
in the passthrough and video pipelines.
There are no changes needed for this in the audio pipeline, as it doesn't
use the input timestamps -- it uses its own timestamps derived from the
buffer sizes instead.
Also add demo option to try this out.
#minor-release
PiperOrigin-RevId: 451353609
There's no need to manually construct a 'default'
DefaultDataSource.Factory instance, we can just pass the `Context` to
`DefaultMediaSourceFactory` and let it construct the
`DefaultDataSource.Factory` internally.
PiperOrigin-RevId: 451155747
Also update names of implementations to match design doc.
In follow-ups, SingleFrameGlTextureProcessor will become
an abstract implementation of a new GlTextureProcessor
interface.
Texture processor makes sense as it processes OpenGL textures.
The term frame processor will be used for something else in
follow-ups.
PiperOrigin-RevId: 451142085
* Rename (via deprecation)
`MediaItem.DrmConfiguration.Builder#forceSessionsForAudioAndVideoTracks`
to `setForceSessionsForAudioAndVideoTracks`. This is more consistent
with existing 'force' method names both in this class and in
`TrackSelectionParameters.Builder`.
* Add missing `@Nullable` annotation to the parameter for
`MediaItem.SubtitleConfiguration.Builder#setMimeType`. This annotation
is already present on the `MediaItem.SubtitleConfiguration#mimeType`
field that this setter corresponds to.
PiperOrigin-RevId: 450941336
There is a problem with the ImageReader formats used by the
SSIM helper that only occurs for Nexus 5 API 21, so as a workaround
we can skip the SSIM calculation on Nexus 5 API 21.
This skips just the SSIM calculation (by setting the value to
1.0 instead and logging). The tests still run when SSIM is skipped
so that we can detect other failures.
PiperOrigin-RevId: 450903183
This value is only needed by subclasses of `Rating`, all of which are
in this package (the `Rating` constructor is already package-private to
ensure this).
PiperOrigin-RevId: 450886872
Representing HTTP headers in a `java.util.Map` is error-prone, because
the names (keys) need to be case-insensitive (per
[RFC 2616 section 4.2](https://datatracker.ietf.org/doc/html/rfc2616#section-4.2))
but this is fundamentally technically incompatible with the `Map`
interface (e.g. with headers `{"key": ["val_1", "val_2"]}` then
`get("key")` and `get("KeY")` both return the same list, but `size()`
returns `1`). It also breaks as soon as you copy the `Map` into a
non-case-insensitive (i.e. normal) `Map` implementation, e.g. Guava's
`ImmutableMap`. It's risky that a line as 'innocent' as
`ImmutableMap.copyOf(headers)` could break things so badly.
For now it's enough to keep this field unstable (it's currently the only
reference to HTTP headers in the stable API). We can consider
stabilising an improved HTTP header representation in future.
PiperOrigin-RevId: 450708598
*** Original commit ***
Rollback of 07302a23bd
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...
***
PiperOrigin-RevId: 450453325
AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.
It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.
In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.
Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.
This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.
PiperOrigin-RevId: 450431146
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450410833
Refactors the DefaultMediaNotificationProvider by separating the
selection of actions and building the notification with it.
The custom commands of the custom layout of the session are turned
into notification actions and when received from the notification
converted back to custom session commands that are sent to the
session.
PiperOrigin-RevId: 450404350
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
Follow-up to 07302a23bd
PiperOrigin-RevId: 450395941
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450386627
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
The debug surface view's output surface can become invalid during a transformation due to the parent activity pausing, for example. This can currently cause a crash when backing out of the `TransformerActivity` in the demo because the surface can be destroyed before the transformer has fully canceled.
Also clarify naming of the outputSurface and inline the private method that created `EGLSurface`s (it was shorter after removing the debug preview).
PiperOrigin-RevId: 449963440
This causes a bug where the forwarded selections are no longer
assumed equal and the child MediaPeriods will think they need
to reset streams even though the selection stayed the same.
Issue: Issue: google/ExoPlayer#10248
PiperOrigin-RevId: 449454038
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
The old reference was just for prototyping HDR. The new reference is for planned work to use the correct formats for input and output for HDR editing in GL.
PiperOrigin-RevId: 449211792
The MMWAVE constant was deprecated in favour of a new constant
with a better name. Thus, we need to check for both constants now.
PiperOrigin-RevId: 449018959
This is an individual language (ISO 639-3) part of the Arabic
macrolanguage ("ar" in ISO 639-1). Add this mapping to our
existing list similar to other individual to macrolanguage
mappings we have already.
Issue: Issue: google/ExoPlayer#10255
PiperOrigin-RevId: 448911950
When using a MatrixTransformationFrameProcessor per transformation
matrix, each frame processor's shader applies the matrix to the
vertices and clips the result to the NDC range when drawing the
output frame.
This change combines consecutive MatrixTransformations into a single
MatrixTransformationFrameProcessor by multiplying the individual
matrices while updating and clipping the visible polygon after
each matrix and mapping the resulting visible polygon back to the
input space so that its vertices and the combined transformation
matrix can be used in the shader.
PiperOrigin-RevId: 448521068
Specifically mention that releasing the session does not release the player and the app needs to take care to release the player.
Issue: androidx/media#73
PiperOrigin-RevId: 448454338
```
[expression.parameter.name.shadows.field] The postcondition
EnsuresNonNull on the declaration of method 'setContentTimeline'
contains ambiguous identifier 'contentTimeline'. Use
"this.contentTimeline" for the field, or "#1" for the formal parameter.
private void setContentTimeline(Timeline contentTimeline) {
^
```
PiperOrigin-RevId: 448285571
Network type detection on these API levels couldn't be tested
yet because of a missing Robolectric feature. This was fixed by
the recent Robolectric upgrade and the restrictions can be removed.
This also requires to replicate the platform hack we rely on on
these API levels.
PiperOrigin-RevId: 448240431
Some RTP foramts are statically assigned, so they don't have the rtpmap
attribute. Create the missing rtpmap attribute in this case.
PiperOrigin-RevId: 448239724
This provides a way for apps to send a custom layout to media3
controllers and legacy controllers by making sure to include custom
actions in the legacy playback state when built in the PlayerWrapper
for broadcasting.
PiperOrigin-RevId: 447967600
A custom action sent by legacy controllers as for instance the System UI mini player arrive at MediaSessionCompat.Callback.onCustomAction() and need to be dispatched to the session callback as a such.
PiperOrigin-RevId: 447486859
This listener replaces
FrameProcessorChain#getAndRethrowBackgroundExceptions.
The listener uses a new exception type FrameProcessingException
separate from TransformationException as the frame processing
components will be made reusable outside of transformer soon.
PiperOrigin-RevId: 447455746
This constant is used for https://docs.gl/es2/glVertexAttribPointer
which takes the number of components per generic vertex attribute
(meaning the size of the individual coordinate vectors here) not the
number of attributes (the number of vertices that the old constant
name referred to).
PiperOrigin-RevId: 447427241
Before this change, we list the formats for which we don't
want transcoding. This change disables transcoding altogether.
This was tested by checking that transcoding takes place on a
short camera recording only when the added flag is not present
(and AndroidManifest does not declare support for HEVC).
PiperOrigin-RevId: 446986580
We won't try to provide/rethrow helpful error messages that are already
provided by GL, as this sort of task would expand into writing a GL verifier.
A Gl verifier is unnecessarily complex for minimal payoff, especially as Apps
expected to read GL error messages would mostly be those writing custom
GlFrameProcessors, who should be already be familiar with reading GL error
messages anyways.
PiperOrigin-RevId: 446950837
Remove PlayerNotificationManager and DefaultMediaDescriptionAdapter
which are unused in session. The functionality is covered by the
MediaNotification.Provider.
PiperOrigin-RevId: 446687875
Relates to https://github.com/square/okhttp/issues/3146. This was from https://github.com/androidx/media/pull/71.
There is a draft PR https://github.com/square/okhttp/pull/7185/files which documents OkHttp's ideal handling of cancellation including interrupts.
But a few key points
1) This is a target state, and OkHttp does not currently handle interrupts correctly. In the past this has been identified, and the advice is to avoid interrupts on Http threads, see discussion on https://github.com/square/okhttp/issues/1902. Also an attempt at a fix here https://github.com/square/okhttp/pull/7023 which wasn't in a form to land.
2) Even with this fixed, it is likely to never be optimal, because of OkHttp sharing a socket connection for multiple inflight requests.
From https://github.com/square/okhttp/pull/7185
```
Thread.interrupt() is Clumsy
----------------------------
`Thread.interrupt()` is Java's built-in mechanism to cancel an in-flight `Thread`, regardless of
what work it's currently performing.
We recommend against using `Thread.interrupt()` with OkHttp because it may disrupt shared resources
including HTTP/2 connections and cache files. In particular, calling `Thread.interrupt()` may cause
unrelated threads' call to fail with an `IOException`.
```
This PR leaves the Loader/DataSource thread parked on a countdown latch, while this may seem wasteful and an additional context switch. However in practice the response isn't returned until the Http2Connection and Http2Reader have a response from the server and these means effectively parking in a `wait()` statement here 9e039e9412/okhttp/src/jvmMain/kotlin/okhttp3/internal/http2/Http2Stream.kt (L140)
PiperOrigin-RevId: 446652468
ScaleToFitFrameProcessor, PresentationFrameProcessor,
and EncoderCompatibilityFrameProcessor now each implement
MatrixTransformation instead of wrapping
MatrixTransformationFrameProcessor.
PiperOrigin-RevId: 446480286
The TrackSelector is released when the player is released. The
TrackSelector can be reused if TrackSelector.init() is called again.
PiperOrigin-RevId: 446439717
This change splits AdvancedFrameProcessor into 4 files:
- MatrixTransformationFrameProcessor for the GlFrameProcessor
implementation
- MatrixTransformation and GlMatrixTransformation for the GlEffect
specification
- MatrixUtils for the static matrix helpers
PiperOrigin-RevId: 446236384
Some APIs from Android 12L were used either via reflection or
constants values were hard-coded. We can now use these APIs directly
since we upgraded the compile SDK version to 32.
PiperOrigin-RevId: 446167543
Overriding any methods of AnalyticsListener requires using the unstable
API. In future we can incrementally add AnalyticsListener methods to the
stable API.
PiperOrigin-RevId: 445420361
Also add warning for what can happen if this is ignored.
Previously the return value was overridden by setOutputSurface, now
setOutputSurface only overrides the values using internally.
PiperOrigin-RevId: 445377036
Developers are expected to (eventually) only use methods on
PlayerView (and not PlayerControlView) to interact with the UI
controller.
PiperOrigin-RevId: 445361488
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
This method was introduced in e414f0d2ac
as a replacement for Util.inferContentType(String) but it incorrectly
didn't return TYPE_SS when passed "ism" or "isml".
PiperOrigin-RevId: 445217167
This appears on the notifcation as the elapsed duration like '2:12'
as we had this with the PlayerNotifcationtManager. Notifications on
recent API versions show a seekbar and duration based on the media
session playback state and ignore the chronometer.
PiperOrigin-RevId: 445110202
We add an entire class like we do for parsing other codec initialization formats; it's currently not doing any parsing though (... initialization data is really simple for AV1 though: just the entire contents of the box).
For testing, we add the sample file, having been re-encoded with ffmpeg (and we also happen to have another av1 file, too).
PiperOrigin-RevId: 444890282
This fixes some small niggles:
1. `inferContentType(String)` is documented to take a path, but in the
tests we're passing full URIs.
2. A `String` parameter is usually a path, but also a MIME type or an
extension. In the new methods, the meaning of a `String` parameter
is always clear from the name of the method.
3. `inferContentType(String)` is always passed an extension in
'production' code (which has to be manually prefixed with a dot).
4. `inferContentType(Uri, @Nullable String)` always ignores the Uri if
the String is non-null. IMO this logic is clearer to a reader if it's
just in-lined at the call-site.
These methods are used from the demo apps, so will be part of the stable
API.
PiperOrigin-RevId: 444826053
This fixes an inconsistent state of the `PlayerInfo` when the index of the playing
media item is changed by a playlist modification. In this inconsistent state,
calling `Playerinfo.getCurrentMediaItem` can produce an
`ArrayIndexOutOfBoundException` (see stack trace in GH issue).
This change takes the following measurements:
- always update sessionPosition and timeline of the PlayerInfo together in
`MediaSessionImpl.PlayerListener` where the PlayerInfo originates from
- add an assertion to avoid building a `PlayerInfo` instance in an inconsistent
state
- reduce the window of opportunity for concurrent access to
`mediaSessionImpl.playerInfo` when dispatching player info changes in
`MediaSessionImpl`
Issue: androidx/media#51
PiperOrigin-RevId: 444812661
To ensure frame processor operations operate on square pixels,
make the frame taller or wider for non-square input pixels.
In addition to automated tests, this was tested by changing the
inputFormat.pixelWidthHeightRatio in the TransformerVideoRenderer.
PiperOrigin-RevId: 444553517
This allows the actual bitmap to be saved, even if output
dimensions are different than expected. Otherwise, differing
output dimensions would throw an exception, preventing the bitmap
from being saved.
PiperOrigin-RevId: 444512210
The last frame processor could use a different drawing command
than a four vertex triangle strip. So we need call its drawing
method again instead of assuming the shape.
PiperOrigin-RevId: 444217274
Avoid no-op FrameProcessors in VideoTranscodingSamplePipeline, to avoid
creating resources for and executing GL for a no-op vertex+fragment shader.
EncoderCompatibilityFrameProcessor will still always be exercised.
PiperOrigin-RevId: 443675833
This test should run on all devices from API 21 (the media uses Baseline
profile level 3.0 H.264) to give us coverage of the full pipeline (forcing
re-encoding) and SSIM calculation on all devices.
PiperOrigin-RevId: 443650002
Split rotationDegrees changes to EncoderCompatibilityFrameProcessor, a new
FrameProcessor.
This removes automatic rotationDegrees adjustments from Presentation, which
allows Presentation to be used for changes before the end of a
FrameProcessorChain pipeline.
PiperOrigin-RevId: 443387226
The issue with decoding getting stuck is still reproducible on `samsung/beyond1lteeea/beyond1:12/SP1A.210812.016/G973FXXUEGULB:user/release-keys`.
PiperOrigin-RevId: 443368546
Some devices under report their resolution support, like 2144 for 2160 in
H265, 1072 for 1080 in H264. This CL only takes care of these two cases,
- reporting 1920x1080 is supported when the device reports 1920x1072, and
- reporting 3840x2160 is supported when the device reports 3840x2144
PiperOrigin-RevId: 443095042
When downlading an adaptive asset, if an ExoPlaybackException happens
during track selection, the player raises an
UnsupportedOperationException which is not handled gracefully and can
crash the app main thread.
This change catches the error and forwards it to
DownloadHelper.Callback.onPrepareError() as an IOException.
PiperOrigin-RevId: 443015332
This is safer because it will prevent any future problems with
creating a new FrameProcessorChain before the previous one has
completed its async release.
From [eglDestroyContext documentation](https://www.khronos.org/registry/EGL/sdk/docs/man/html/eglDestroyContext.xhtml):
"If the EGL rendering context is not current to any thread,
eglDestroyContext destroys it immediately."
The context isn't current to any thread here because GlUtil calls
eglMakeCurrent with EGL_NO_CONTEXT before calling eglDestroyContext.
So everthing should be released once the FrameProcessorChain's
release task terminates.
PiperOrigin-RevId: 442807484
* Group what's now many related test PNGs by moving them to their own directory.
* Move bitmap references to files where they're used, as each bitmap is only
used once each, except the original bitmap.
PiperOrigin-RevId: 441485489
Scaling and rotation using ScaleToFitFrameProcessor may change the
the resolution and aspect ratio, so defaulting to the same as the
input is no longer accurate.
PiperOrigin-RevId: 441463349
What a minimal implementation should include is now explained in the
interface javadoc while the method name reflects what the method does.
PiperOrigin-RevId: 441432059
The stream with the mp3 track is added because
- We only encode to AAC
- We only encode when the source track is not AAC
Now that we have a way to force encoding, we no longer need the mp3 track.
The test asset is kept for later parameterized testing.
PiperOrigin-RevId: 440876080
The MIME type was set to H265 to force transcoding. Now that we have an encoder
factory that forces encoding, switching back to H264 ensures the quality test
is conducted on more devices (those don't support H265 can be tested now).
However, H265 should be part of the quality test after we have proper mechanism
to skip test based on device capability.
PiperOrigin-RevId: 440132471
The DefaultMediaNotificationProvider checks if a command is available
before putting the respective action in the notification.
PiperOrigin-RevId: 440114422
We don't currently have enough understanding of the correlation between a
specific SSIM score and video quality. Dropping to .90 to make most tests pass.
Especially when there's no discernible difference from the videos with .9 and
.95 SSIM.
PiperOrigin-RevId: 440047551
PeriodicDimmingFrameProcessor is an example of how a custom fragment
shader can be used to apply color changes that change over time.
PiperOrigin-RevId: 439840609
The matrix provider allows the transformation matrix to be updated
for each frame based on the timestamp.
The following example effects using this were added to the demo:
* a zoom-in transition for the start of the video,
* cropping a rotating rectangular frame portion,
* rotating the frame around the y-axis in 3D.
PiperOrigin-RevId: 439791592
We add an entire class like we do for parsing other codec initialization formats; it's currently not doing any parsing though (... initialization data is really simple for AV1 though: just the entire contents of the box).
For testing, we add the sample file, having been re-encoded with ffmpeg (and we also happen to have another av1 file, too).
PiperOrigin-RevId: 439453823
This allows apps to use AdvancedFrameProcessor to apply transformations
in 3D space. This functionality is not used in transformer otherwise.
PiperOrigin-RevId: 439313406
The encoder surface is no longer needed for the OpenGL setup and frame
processor initialization, as a placeholder surface is used instead. So
all of the setup can now be done in the factory method.
PiperOrigin-RevId: 438844450
App code should get all of this information from TrackGroupInfo,
and should only need TrackGroup as a key to use for overrides.
PiperOrigin-RevId: 438840925
This allows the MuxerWrapper to keep using trackTypeToTimeUs for
calculating the video duration but slightly changes the meaning of
its interleaving constraints.
PiperOrigin-RevId: 438780686
This provides better compatibility with MediaExtractor, which does read these fields; we also need them for being able to mux file contents into another mp4 file.
Also, there is a minor refactor included so that we have an actual type for esds box contents instead of a pair.
PiperOrigin-RevId: 438673825
The placeholder surface is either EGL_NO_SURFACE or a 1x1 pbuffer
depending on whether the device supports EGL_KHR_surfaceless_context.
PiperOrigin-RevId: 438541846
Since the output textures and surfaces are managed by the
FrameProcessorChain, clearing them there makes sense.
This is also less error-prone as it might not be obvious to
someone implementing a GlFrameProcessor that they need to
glClear. (Clearing twice won't cause any problems.)
PiperOrigin-RevId: 438532247
This is basically 'container' and 'subtitle' MIME types
I previously avoided stabilising any 'custom' MIME types (those
containing '/x-') but it certainly seems reasonable to expect
developers to use APPLICATION_M3U8 and so then it also makes sense
to stabilise other 'similar' custom MIME types too.
PiperOrigin-RevId: 438501642
This change adds the ability to update the error code of the PlaybackStateCompat in
cases we need this for backwards compatibility. It is applied in the least
intrusive way because normally, return values of a service method should not change
the state of the `PlaybackStateCompat`, just because it has nothing to do with the
playback state but rather with the state of the `MediaLibrarySession`.
For this reason only the error code `RESULT_ERROR_SESSION_AUTHENTICATION_EXPIRED`
is taken into account while all other error codes are not mapped to the
`PlaybackStateCompat'.
PiperOrigin-RevId: 438038852
This requires an additional nanos to micros conversion because
the SurfaceTexture uses nanos. But as the timestamps from the
MediaCodec decoder (propagated in DefaultCodec#releaseOutputBuffer) are
in microseconds no precision is lost here.
Also add test that checks output video duration.
PiperOrigin-RevId: 438010490
MAXIMUM_AVERAGE_PIXEL_ABSOLUTE_DIFFERENCE was copied from a test
class, but BitmapTestUtil isn't a test. So the javadoc needs
rewording to reflect that.
PiperOrigin-RevId: 438001833
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
From Android T onwards `MediaCodec` supports requesting tone-mapping down to
SDR. Add an option to request this behavior and document that it isn't
supported before T. Also add an option in the demo app to try it out.
Tested manually on a prerelease build.
PiperOrigin-RevId: 437765325
The thread name is used to verify the thread in both createOpenGlObjectsAndInitializeFrameProcessors() and processFrame().
Also remove glThread field that was only used for this verification.
PiperOrigin-RevId: 437730804
Since the output size can be overridden, the viewport should be
ouputWidth/Height and NOT the ExternalCopyFrameProcessor's output size
which matches the input size.
PiperOrigin-RevId: 437256635
* The AdvancedFrameProcessor calls use() in updateProgramAndDraw().
* The AdvancedFrameProcessor has the same input and output dimensions.
PiperOrigin-RevId: 437231350
On some devices, decoding gets stuck when the number of frames pending at the
`SurfaceTexture` is too high. We added a workaround that only allows one frame
to be pending at a time. That fixed the issue, however, based on on-device
testing it seems that it's safe to queue more than one frame.
Add a method that returns a safe estimate of the number of frames that can be
pending at a time, and use this to limit the number of frames that can be
released from the decoder but not processed by the frame processor chain.
PiperOrigin-RevId: 437057075
Configuring the frame sizes between frame processors is now the
FrameProcessorChain's rather than the caller's responsibility.
The caller can getOutputSize() and override it for encoder fallback
in configure().
PiperOrigin-RevId: 437048436
The factory method is replaced by a public constructor and
configure() method which configures the input/output surfaces
and handles the OpenGL setup.
This is a prerequisite for removing the responsibility of the
caller to configureSizes() before creating the chain in a follow-up.
PiperOrigin-RevId: 437028882
This allows us to bypass many device-specific issues, that only occur when
decoding directly to an encoder surface, without OpenGL. This also allows us
to maintain fewer code branches, which require additional testing to verify
correctness.
PiperOrigin-RevId: 437003138
Allow apps to modify how frames are presented, via modifying resolution.
A follow-up CL will provide aspect ratio, cropping, etc.
PiperOrigin-RevId: 436963312
* These grouping parentheses are unnecessary; it is unlikely the code will be misinterpreted without them
(see http://go/bugpattern/UnnecessaryParentheses) (11 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 436726763
SEF is similar to frame editing, where the input and output videos are
not intended to match, so SSIM will not provide a reliable value. To
check SSIM correctly in future, we would need to provide
golden/expected video files to compare output against.
PiperOrigin-RevId: 436707240
The FrameProcessorChain manages a List<GlFrameProcessor>.
FrameProcessorChainDataProcessingTest now tests chaining ScaleToFit-
and AdvancedFrameProcessors.
PiperOrigin-RevId: 436468037
This currently causes the test to fail on Pixel 6 Pro running a recent S build
SQ1D.220205.004.
There is no need to test audio transcoding while we are measuring video
quality.
PiperOrigin-RevId: 435635314
With this change, the MediaNotificationManager stops MediaSessionService
and hides any notifications if the player has no media items or the
player hasn't been prepared yet.
PiperOrigin-RevId: 435349363
ExternalCopyFrameProcessor's output dimensions match the input
size not the output size. So the intermediate texture size
should match the input size.
Also rename configureOutputDimensions to configureOutputSize.
PiperOrigin-RevId: 435058789
More info: go/lsc-assertthrows and go/assertthrows
NOTE: if the source of truth for this code is _NOT_ `//third_party/`, please ask for this CL to be reverted.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:434925976:BASE:434869111:1647399186064:de338189
PiperOrigin-RevId: 435047509
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
Use android.util.Size, whose naming is much easier to understand than Pair<Integer, Integer>, in both FrameProcessor and EncoderUtil.
PiperOrigin-RevId: 434813986
* Move auto-adjustments for transformation matrices from the
VideoTranscodingSamplePipeline constructor to the new
ScaleToFitFrameProcessor.
* Add GlFrameProcessor#getOutputDimensions() to allow for GlFrameProcessors with
different input and output dimensions. This is a prerequisite for
Presentation.
* Tested with unit tests (and manually just in case).
* A follow up CL will implement change the FrameProcessor input to be scale and
rotate values as requested by the user. This was kept out of this CL to
reduce CL review size. Presentation will also be implemented in a follow up
CL.
PiperOrigin-RevId: 434774854
As pointed out in a previous review, createFallbackTransformationRequest
can be a bit confusing to parse.
Added javadocs and renamed parameters appropriately, to make it slightly
more easy to understand.
PiperOrigin-RevId: 434733313
Added PCM RTP packet reader and added support for PCM 8 bit,
16 bit, ALAW and MULAW playback through RTSP.
Change-Id: If0a187b55faa89850a159e17eae28358d6634799
*** Original commit ***
Rollback of aa22bc2dbe
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClick...
***
PiperOrigin-RevId: 434502423
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
The variable marks the coordinates used to sample from a texture, so hopefully
this makes the naming a bit more descriptive.
This renames vTexCoords and aTexCoords. No functional changes intended.
PiperOrigin-RevId: 433499934
This fixes an exception thrown when parceling becasue the type can not be found
(expects the AdsPlaybackState to be Serializable). Transforming the map and the
ad playback states to a Bundle fixes the problem.
#minor-release
PiperOrigin-RevId: 433491993
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
If an OpenGL call blocks because the encoder's input surface is full,
this will now block the background thread while the main thread can
continue querying encoder output and free up encoder capacity until
it accepts more input unblocking the background thread.
PiperOrigin-RevId: 433283287
