The FinalMatrixTransformationProcessorWrapper ensures that the
surface is only replaced when it is not being rendered to and vice
versa.
PiperOrigin-RevId: 458007639
The outputHeight in the TransformationRequest is the height of
the frame as it would be displayed (i.e., after applying any
rotation specified in the format). So pass-through should only
be used if the requested outputHeight matches the input
format's height after applying the rotation.
PiperOrigin-RevId: 457934867
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
NoUidTimeline still exists as a private detail of TestUtil, but it no
longer extends ForwardingTimeline because the interactions are quite
hard to reason about.
#minor-release
PiperOrigin-RevId: 457703593
1. The offloadSchedulingEnabled value doesn't need to be in
PlaybackInfo because it's never updated in EPII.
2. The sleepingForOffload value in EPII wasn't updated explicitly
(just via the return value of a method). It was also only
meant to be enabled while the player is actively playing, but
confusingly triggered from a path where the player may
theoretically be buffering as well.
3. The offload sleeping (=not scheduling doSomeWork) was interwoven
into the actual scheduling code making it slightly hard to follow.
This can be improved slightly by keeping the offload sleeping
decision and the scheduling separate.
PiperOrigin-RevId: 457427293
This will be useful for downgrading to a lower resolution during
a slow preview and for processing slide-shows once sequential
multi-asset editing is supported.
PiperOrigin-RevId: 457017255
- Corrected trackEventBytes traversal in TrackChunk where the array position marker was not incremented properly, leading to duplicate sample output.
- Amended TrackEvent "Meta Event" parsing to account for the length of variable length bytes.
- Fixed a bug with TrackEvent message parsing where message data was parsed incorrectly due to miscalculated length.
PiperOrigin-RevId: 456967968
videoEncoderFormatUnsupported_completesWithError() has recently
been flaky on API 31 emulators on presubmit because a different
exception than the expected exception is thrown.
This disables it on those emulators to reduce testing noise
until the underlying problem is investigated and resolved.
PiperOrigin-RevId: 456765512
This change is just renaming. There is no functional change intended.
The FrameProcessor interface will be created in a follow-up.
PiperOrigin-RevId: 456741628
After this change GlEffects can use any GlTextureProcessor not just
SingleFrameGlTextureProcessor.
MediaPipeProcessor now implements GlTextureProcessor directly which
allows it to reuse MediaPipe's output texture for its output texture
and avoids an extra copy shader step.
PiperOrigin-RevId: 456530718
After this change, FrameProcessorChain chains any GlTextureProcessors
instead of only SingleFrameGlTextureProcessors.
The GlTextureProcessors are chained in a bidirectional manner using
ChainingGlTextureProcessorListener to feed input and output related
events forward and release events backwards.
PiperOrigin-RevId: 456478414
The offload sleeping stops as soon as a new DO_SOME_WORK message
is handled (because this indicates an expected change in rendering
and we want to stop sleeping until we know it's safe to do so).
Every exit path from doSomeWork needs to clear other pending
DO_SOME_WORK messages as these requests have already been handled by
the current method invocation. This currently doesn't happen from the
offload sleeping return path and a previously queued DO_SOME_WORK
message can immediately wake up the rendering loop again.
Fix this by moving the message removal to the beginning of the
doSomeWork method (as it prevents forgetting it in one of the
exit paths later).
PiperOrigin-RevId: 456259715
In follow-ups the FrameProcessorChain will set an instance of this
listener for each GlTextureProcessor to chain it with its previous
and next GlTextureProcesssor.
PiperOrigin-RevId: 455628942
The API 32 SDK has incorrect versioning metadata for Spatializer. It
reports the whole class has only been present since API 33 (which is
surely impossible given it's present in the API 32 SDK):
https://issuetracker.google.com/234009300
The metadata seems to be correct in the API 33 SDK, so this baseline
will no longer be needed when we bump to `compileSdkVersion = 33`.
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
(cherry picked from commit 61ab75b8b8)
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
The wrapper
* catches exceptions for each task and notifies the
listener (this will be used more in follow-ups when processFrame
is split into lots of listeners and callbacks),
* removes finished tasks from the queue and signals any exceptions
that occurred to the listener each time a new task is executed.
PiperOrigin-RevId: 455345184
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
PiperOrigin-RevId: 455115567
(cherry picked from commit 21d4e85817)
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
(cherry picked from commit b475f1f2da)
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
#minor-release
PiperOrigin-RevId: 455115567
This change adds a SurfaceProvider interface which is necessary to
allow for texture processors whose output size becomes available
asynchronously in follow-ups.
VTSP's implementation of this interface wraps the encoder and provides
its input surface together with the output frame width, height, and
orientation as used for encoder configuration.
The FrameProcessorChain converts the output frames to the provided
orientation and resolution using a ScaleToFitTransformation and
Presentation replacing EncoderCompatibilityTransformation.
PiperOrigin-RevId: 455112598
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
- Fixed MidiExtractor state issues which caused seeking to behave unexpectedly. Ensures the extractor is now always in the file loading state after returning RESULT_END_OF_INPUT.
- Fixed an infinite loop in MidiExtractor caused by the file data array having an initial size of 0. The extractor attempted to increase the capacity of the array by using this size of 0 in it's calculations.
PiperOrigin-RevId: 455107511
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
(cherry picked from commit e8bcdf437e)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit 222faa96d0)
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
The native GL errors are in an arbitrary order according to
https://www.khronos.org/registry/OpenGL-Refpages/es2.0/xhtml/glGetError.xml
This means any of them could contain the most useful message
so it's better to use all for the GlException's message rather than
picking the last message and logging all others.
PiperOrigin-RevId: 454130460
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit e2f0fd7673)
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
(cherry picked from commit 9221eeb2d8)
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
(cherry picked from commit 8b592fc77a)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08)
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
(cherry picked from commit d506c709c9)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit 8697338233)
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
(cherry picked from commit bd126ec5c5)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
This removes the prior restriction of needing to remember not to crop and set aspect ratio in the same Presentation.Builder, and makes each class a bit more targeted.
This is partially made feasible by the past work to merge consecutive
MatrixTransformations into a single MatrixTransformationFrameProcessor, which
ensures that there's no loss in quality between successive MatrixTransformations.
PiperOrigin-RevId: 453660582
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
SingleFrameGlTextureProcessor is now an abstract class containing a
default implementation of the more flexible GlTextureProcessor interface
while still exposing the same simple abstract methods for single frame
processing it previously did.
FrameProcessorChain and GlEffect will be changed to use
GlTextureProcessor in follow-ups.
PiperOrigin-RevId: 453633000
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
(cherry picked from commit 814e43dbb9)
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
(cherry picked from commit 247c2d845d)
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
(cherry picked from commit 39674bec78)
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
This change makes MediaSessionPermissionTest.removeMediaItems()
non-flaky. This is a quick fix though it'd be good to refactor this
test file.
PiperOrigin-RevId: 453162764
Implementations of this interface will be able to drop or add frames,
change timestamps, accept multiple input frames before producing
output, and process frames on their own background thread.
A default implementation of this interface will be added to SingleFrameGlTextureProcessor in a follow-up.
PiperOrigin-RevId: 453159835
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
This internal listener avoids wrapping the TransformationExceptions
in PlaybackExceptions that are handled via the Player.Listener and
is also used for FrameProcessingExceptions which already avoided
the PlaybackException layer previously.
This listener will also be useful in follow-ups for encoder-related
TransformationExceptions that are thrown in the SurfaceProvider that
will be called on the GL thread.
PiperOrigin-RevId: 452074575
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
(cherry picked from commit 1282175808)
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
Once the more advanced GlTextureProcessor interface exists,
it will be possible to change the output size of a GlTextureProcessor
between frames. To keep the re-configuration based on the frame sizes
minimal, things indepedent of the frame size, such as the GlProgram,
can be initialized in the constructor.
PiperOrigin-RevId: 451997584
This provides an (unstable) API for apps to broadcast session extras
Bundle to all connected controllers and set the extras in the legacy
session.
Similar to the custom layout, the extras Bundle is not part of the
Media3 session state. This means that when a Media3 controller
connects to the session after the broadcast, the extras needs to be
sent to that controller in `MediaSession.Callback.onPostConnect(MediaSession session, ControllerInfo controller)`.
PiperOrigin-RevId: 451871731
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
The MediaItemFiller is not flexible enough for most realworld usages
because:
- it doesn't allow asynchronous resolution of MediaItems (e.g. to
look up URIs from a database)
- it doesn't allow to batch updates for multiple items or do more
advanced customizations (e.g. expanding a mediaId representing
a playlist to multiple items).
Both issues can be solved by passing in a list of items and
returning a ListenableFuture. The callback itself can also move
into MediaSession.Callback for consistency with the other
callbacks.
PiperOrigin-RevId: 451857319
The MockPlayer currently:
- uses separate fields for single mediaItem vs multiple mediaItems
- replaces all items on addMediaItem operations
- does nothing on remove/move operations.
Fix all of this by using a single field that replicates the player
operations directly.
Some tests also need to be updated to make them more realistic
(for example only removing items from a playlist that have
previously been added).
PiperOrigin-RevId: 451857271
In some cases it's helpful to have access to the session
(e.g. to get the PlayerWrapper) from within the PostSessionTask
implementations. This change forwards the existing sessionImpl
instance to all these callbacks.
PiperOrigin-RevId: 451857191
These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).
PiperOrigin-RevId: 451857093
ExoPlayer applies a large time offset to buffers so that, if the input has negative timestamps, generally buffers seen by the decoders should have positive timestamps. Modify how the offset is handled in `Transformer` so that decoders and encoders generally see positive timestamps, by leaving the offset on samples when reading them in the base renderer (remove the code that removed the offset), and then removing the offset when muxing. Also update the frame processor chain and slow motion flattening code to retain the existing behavior after this change (these both need original media presentation timestamps)
Tested via existing end-to-end tests and manually verified that the overlay frame processor shows the expected original media timestamps.
Aside: we don't need the same logic as ExoPlayer to track stream offsets across the decoder yet, because we don't try to handle stream changes during playback in single asset editing. (There is an edge case of multi-period DASH that may not work but I doubt anyone will use that as input to `Transformer` before we change the code to handle multi-asset properly.) In future we should try to refactor interaction with the decoder to use the same code for Transformer and ExoPlayer.
PiperOrigin-RevId: 451846055
Most devices won't support 8k decoding, so they'll skip this test entirely.
As the video is quite short, this test shouldn't be any longer than the nearby,
long-running 4k60 test.
PiperOrigin-RevId: 451423368
Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
SSIM calculation requires the input and output dimensions to be identical.
For devices that can't encode the input dimensions, skip SSIM calculations and
log the cause. Only apply this on tests where the encoder may not support the
input file dimensions.
PiperOrigin-RevId: 451364904
Decode-only video frames (needed when the frame at / first frame after the
clipping start is not a key frame) need to be decoded but not passed to
the frame processor chain or encoder.
The clipping start offset needs to be removed from the frame timestamps
in the passthrough and video pipelines.
There are no changes needed for this in the audio pipeline, as it doesn't
use the input timestamps -- it uses its own timestamps derived from the
buffer sizes instead.
Also add demo option to try this out.
#minor-release
PiperOrigin-RevId: 451353609
There's no need to manually construct a 'default'
DefaultDataSource.Factory instance, we can just pass the `Context` to
`DefaultMediaSourceFactory` and let it construct the
`DefaultDataSource.Factory` internally.
PiperOrigin-RevId: 451155747
Also update names of implementations to match design doc.
In follow-ups, SingleFrameGlTextureProcessor will become
an abstract implementation of a new GlTextureProcessor
interface.
Texture processor makes sense as it processes OpenGL textures.
The term frame processor will be used for something else in
follow-ups.
PiperOrigin-RevId: 451142085
* Rename (via deprecation)
`MediaItem.DrmConfiguration.Builder#forceSessionsForAudioAndVideoTracks`
to `setForceSessionsForAudioAndVideoTracks`. This is more consistent
with existing 'force' method names both in this class and in
`TrackSelectionParameters.Builder`.
* Add missing `@Nullable` annotation to the parameter for
`MediaItem.SubtitleConfiguration.Builder#setMimeType`. This annotation
is already present on the `MediaItem.SubtitleConfiguration#mimeType`
field that this setter corresponds to.
PiperOrigin-RevId: 450941336
There is a problem with the ImageReader formats used by the
SSIM helper that only occurs for Nexus 5 API 21, so as a workaround
we can skip the SSIM calculation on Nexus 5 API 21.
This skips just the SSIM calculation (by setting the value to
1.0 instead and logging). The tests still run when SSIM is skipped
so that we can detect other failures.
PiperOrigin-RevId: 450903183
This value is only needed by subclasses of `Rating`, all of which are
in this package (the `Rating` constructor is already package-private to
ensure this).
PiperOrigin-RevId: 450886872
Representing HTTP headers in a `java.util.Map` is error-prone, because
the names (keys) need to be case-insensitive (per
[RFC 2616 section 4.2](https://datatracker.ietf.org/doc/html/rfc2616#section-4.2))
but this is fundamentally technically incompatible with the `Map`
interface (e.g. with headers `{"key": ["val_1", "val_2"]}` then
`get("key")` and `get("KeY")` both return the same list, but `size()`
returns `1`). It also breaks as soon as you copy the `Map` into a
non-case-insensitive (i.e. normal) `Map` implementation, e.g. Guava's
`ImmutableMap`. It's risky that a line as 'innocent' as
`ImmutableMap.copyOf(headers)` could break things so badly.
For now it's enough to keep this field unstable (it's currently the only
reference to HTTP headers in the stable API). We can consider
stabilising an improved HTTP header representation in future.
PiperOrigin-RevId: 450708598
*** Original commit ***
Rollback of 07302a23bd
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default imple...
***
PiperOrigin-RevId: 450453325
AudioTrack.setOffloadEndOfStream should be called after a track
has been buffered. Additionally, the AudioTrack must be playing.
It has been observed that for very short media (<1s), the AudioTrack
might not have started immediately after the read that buffered
the audio.
In such a situation, calling AudioTrack.setOffloadEndOfStream throws
and playback fails.
Avoid this failure by checking that the AudioTrack is playing before
calling setOffloadEndOfStream.
This means that very short gapless media will not be gapless, this was
deemed acceptable given that such very short media should be very rare
in offload.
PiperOrigin-RevId: 450431146
*** Original commit ***
Remove `@Nullable` from `MediaSource.Factory` setters
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450410833
Refactors the DefaultMediaNotificationProvider by separating the
selection of actions and building the notification with it.
The custom commands of the custom layout of the session are turned
into notification actions and when received from the notification
converted back to custom session commands that are sent to the
session.
PiperOrigin-RevId: 450404350
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
Follow-up to 07302a23bd
PiperOrigin-RevId: 450395941
The null-behaviour of these methods creates a minimization footgun,
because **any** call to these setters will prevent R8 from removing
the default implementation (even if it's never used by the app) - this
is because R8 can't tell the default implementation is only used if the
parameter is `null`.
PiperOrigin-RevId: 450386627
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
The debug surface view's output surface can become invalid during a transformation due to the parent activity pausing, for example. This can currently cause a crash when backing out of the `TransformerActivity` in the demo because the surface can be destroyed before the transformer has fully canceled.
Also clarify naming of the outputSurface and inline the private method that created `EGLSurface`s (it was shorter after removing the debug preview).
PiperOrigin-RevId: 449963440
This causes a bug where the forwarded selections are no longer
assumed equal and the child MediaPeriods will think they need
to reset streams even though the selection stayed the same.
Issue: Issue: google/ExoPlayer#10248
PiperOrigin-RevId: 449454038
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
The old reference was just for prototyping HDR. The new reference is for planned work to use the correct formats for input and output for HDR editing in GL.
PiperOrigin-RevId: 449211792
The MMWAVE constant was deprecated in favour of a new constant
with a better name. Thus, we need to check for both constants now.
PiperOrigin-RevId: 449018959
This is an individual language (ISO 639-3) part of the Arabic
macrolanguage ("ar" in ISO 639-1). Add this mapping to our
existing list similar to other individual to macrolanguage
mappings we have already.
Issue: Issue: google/ExoPlayer#10255
PiperOrigin-RevId: 448911950
When using a MatrixTransformationFrameProcessor per transformation
matrix, each frame processor's shader applies the matrix to the
vertices and clips the result to the NDC range when drawing the
output frame.
This change combines consecutive MatrixTransformations into a single
MatrixTransformationFrameProcessor by multiplying the individual
matrices while updating and clipping the visible polygon after
each matrix and mapping the resulting visible polygon back to the
input space so that its vertices and the combined transformation
matrix can be used in the shader.
PiperOrigin-RevId: 448521068
Specifically mention that releasing the session does not release the player and the app needs to take care to release the player.
Issue: androidx/media#73
PiperOrigin-RevId: 448454338
```
[expression.parameter.name.shadows.field] The postcondition
EnsuresNonNull on the declaration of method 'setContentTimeline'
contains ambiguous identifier 'contentTimeline'. Use
"this.contentTimeline" for the field, or "#1" for the formal parameter.
private void setContentTimeline(Timeline contentTimeline) {
^
```
PiperOrigin-RevId: 448285571
Network type detection on these API levels couldn't be tested
yet because of a missing Robolectric feature. This was fixed by
the recent Robolectric upgrade and the restrictions can be removed.
This also requires to replicate the platform hack we rely on on
these API levels.
PiperOrigin-RevId: 448240431
Some RTP foramts are statically assigned, so they don't have the rtpmap
attribute. Create the missing rtpmap attribute in this case.
PiperOrigin-RevId: 448239724
This provides a way for apps to send a custom layout to media3
controllers and legacy controllers by making sure to include custom
actions in the legacy playback state when built in the PlayerWrapper
for broadcasting.
PiperOrigin-RevId: 447967600
A custom action sent by legacy controllers as for instance the System UI mini player arrive at MediaSessionCompat.Callback.onCustomAction() and need to be dispatched to the session callback as a such.
PiperOrigin-RevId: 447486859
This listener replaces
FrameProcessorChain#getAndRethrowBackgroundExceptions.
The listener uses a new exception type FrameProcessingException
separate from TransformationException as the frame processing
components will be made reusable outside of transformer soon.
PiperOrigin-RevId: 447455746
This constant is used for https://docs.gl/es2/glVertexAttribPointer
which takes the number of components per generic vertex attribute
(meaning the size of the individual coordinate vectors here) not the
number of attributes (the number of vertices that the old constant
name referred to).
PiperOrigin-RevId: 447427241
Before this change, we list the formats for which we don't
want transcoding. This change disables transcoding altogether.
This was tested by checking that transcoding takes place on a
short camera recording only when the added flag is not present
(and AndroidManifest does not declare support for HEVC).
PiperOrigin-RevId: 446986580
We won't try to provide/rethrow helpful error messages that are already
provided by GL, as this sort of task would expand into writing a GL verifier.
A Gl verifier is unnecessarily complex for minimal payoff, especially as Apps
expected to read GL error messages would mostly be those writing custom
GlFrameProcessors, who should be already be familiar with reading GL error
messages anyways.
PiperOrigin-RevId: 446950837
Remove PlayerNotificationManager and DefaultMediaDescriptionAdapter
which are unused in session. The functionality is covered by the
MediaNotification.Provider.
PiperOrigin-RevId: 446687875
Relates to https://github.com/square/okhttp/issues/3146. This was from https://github.com/androidx/media/pull/71.
There is a draft PR https://github.com/square/okhttp/pull/7185/files which documents OkHttp's ideal handling of cancellation including interrupts.
But a few key points
1) This is a target state, and OkHttp does not currently handle interrupts correctly. In the past this has been identified, and the advice is to avoid interrupts on Http threads, see discussion on https://github.com/square/okhttp/issues/1902. Also an attempt at a fix here https://github.com/square/okhttp/pull/7023 which wasn't in a form to land.
2) Even with this fixed, it is likely to never be optimal, because of OkHttp sharing a socket connection for multiple inflight requests.
From https://github.com/square/okhttp/pull/7185
```
Thread.interrupt() is Clumsy
----------------------------
`Thread.interrupt()` is Java's built-in mechanism to cancel an in-flight `Thread`, regardless of
what work it's currently performing.
We recommend against using `Thread.interrupt()` with OkHttp because it may disrupt shared resources
including HTTP/2 connections and cache files. In particular, calling `Thread.interrupt()` may cause
unrelated threads' call to fail with an `IOException`.
```
This PR leaves the Loader/DataSource thread parked on a countdown latch, while this may seem wasteful and an additional context switch. However in practice the response isn't returned until the Http2Connection and Http2Reader have a response from the server and these means effectively parking in a `wait()` statement here 9e039e9412/okhttp/src/jvmMain/kotlin/okhttp3/internal/http2/Http2Stream.kt (L140)
PiperOrigin-RevId: 446652468
ScaleToFitFrameProcessor, PresentationFrameProcessor,
and EncoderCompatibilityFrameProcessor now each implement
MatrixTransformation instead of wrapping
MatrixTransformationFrameProcessor.
PiperOrigin-RevId: 446480286
The TrackSelector is released when the player is released. The
TrackSelector can be reused if TrackSelector.init() is called again.
PiperOrigin-RevId: 446439717
This change splits AdvancedFrameProcessor into 4 files:
- MatrixTransformationFrameProcessor for the GlFrameProcessor
implementation
- MatrixTransformation and GlMatrixTransformation for the GlEffect
specification
- MatrixUtils for the static matrix helpers
PiperOrigin-RevId: 446236384
Some APIs from Android 12L were used either via reflection or
constants values were hard-coded. We can now use these APIs directly
since we upgraded the compile SDK version to 32.
PiperOrigin-RevId: 446167543
Overriding any methods of AnalyticsListener requires using the unstable
API. In future we can incrementally add AnalyticsListener methods to the
stable API.
PiperOrigin-RevId: 445420361
Also add warning for what can happen if this is ignored.
Previously the return value was overridden by setOutputSurface, now
setOutputSurface only overrides the values using internally.
PiperOrigin-RevId: 445377036
Developers are expected to (eventually) only use methods on
PlayerView (and not PlayerControlView) to interact with the UI
controller.
PiperOrigin-RevId: 445361488
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
This method was introduced in e414f0d2ac
as a replacement for Util.inferContentType(String) but it incorrectly
didn't return TYPE_SS when passed "ism" or "isml".
PiperOrigin-RevId: 445217167
This appears on the notifcation as the elapsed duration like '2:12'
as we had this with the PlayerNotifcationtManager. Notifications on
recent API versions show a seekbar and duration based on the media
session playback state and ignore the chronometer.
PiperOrigin-RevId: 445110202
We add an entire class like we do for parsing other codec initialization formats; it's currently not doing any parsing though (... initialization data is really simple for AV1 though: just the entire contents of the box).
For testing, we add the sample file, having been re-encoded with ffmpeg (and we also happen to have another av1 file, too).
PiperOrigin-RevId: 444890282
This fixes some small niggles:
1. `inferContentType(String)` is documented to take a path, but in the
tests we're passing full URIs.
2. A `String` parameter is usually a path, but also a MIME type or an
extension. In the new methods, the meaning of a `String` parameter
is always clear from the name of the method.
3. `inferContentType(String)` is always passed an extension in
'production' code (which has to be manually prefixed with a dot).
4. `inferContentType(Uri, @Nullable String)` always ignores the Uri if
the String is non-null. IMO this logic is clearer to a reader if it's
just in-lined at the call-site.
These methods are used from the demo apps, so will be part of the stable
API.
PiperOrigin-RevId: 444826053
This fixes an inconsistent state of the `PlayerInfo` when the index of the playing
media item is changed by a playlist modification. In this inconsistent state,
calling `Playerinfo.getCurrentMediaItem` can produce an
`ArrayIndexOutOfBoundException` (see stack trace in GH issue).
This change takes the following measurements:
- always update sessionPosition and timeline of the PlayerInfo together in
`MediaSessionImpl.PlayerListener` where the PlayerInfo originates from
- add an assertion to avoid building a `PlayerInfo` instance in an inconsistent
state
- reduce the window of opportunity for concurrent access to
`mediaSessionImpl.playerInfo` when dispatching player info changes in
`MediaSessionImpl`
Issue: androidx/media#51
PiperOrigin-RevId: 444812661
To ensure frame processor operations operate on square pixels,
make the frame taller or wider for non-square input pixels.
In addition to automated tests, this was tested by changing the
inputFormat.pixelWidthHeightRatio in the TransformerVideoRenderer.
PiperOrigin-RevId: 444553517
This allows the actual bitmap to be saved, even if output
dimensions are different than expected. Otherwise, differing
output dimensions would throw an exception, preventing the bitmap
from being saved.
PiperOrigin-RevId: 444512210
The last frame processor could use a different drawing command
than a four vertex triangle strip. So we need call its drawing
method again instead of assuming the shape.
PiperOrigin-RevId: 444217274
Avoid no-op FrameProcessors in VideoTranscodingSamplePipeline, to avoid
creating resources for and executing GL for a no-op vertex+fragment shader.
EncoderCompatibilityFrameProcessor will still always be exercised.
PiperOrigin-RevId: 443675833
This test should run on all devices from API 21 (the media uses Baseline
profile level 3.0 H.264) to give us coverage of the full pipeline (forcing
re-encoding) and SSIM calculation on all devices.
PiperOrigin-RevId: 443650002
Split rotationDegrees changes to EncoderCompatibilityFrameProcessor, a new
FrameProcessor.
This removes automatic rotationDegrees adjustments from Presentation, which
allows Presentation to be used for changes before the end of a
FrameProcessorChain pipeline.
PiperOrigin-RevId: 443387226
The issue with decoding getting stuck is still reproducible on `samsung/beyond1lteeea/beyond1:12/SP1A.210812.016/G973FXXUEGULB:user/release-keys`.
PiperOrigin-RevId: 443368546
Some devices under report their resolution support, like 2144 for 2160 in
H265, 1072 for 1080 in H264. This CL only takes care of these two cases,
- reporting 1920x1080 is supported when the device reports 1920x1072, and
- reporting 3840x2160 is supported when the device reports 3840x2144
PiperOrigin-RevId: 443095042
When downlading an adaptive asset, if an ExoPlaybackException happens
during track selection, the player raises an
UnsupportedOperationException which is not handled gracefully and can
crash the app main thread.
This change catches the error and forwards it to
DownloadHelper.Callback.onPrepareError() as an IOException.
PiperOrigin-RevId: 443015332
This is safer because it will prevent any future problems with
creating a new FrameProcessorChain before the previous one has
completed its async release.
From [eglDestroyContext documentation](https://www.khronos.org/registry/EGL/sdk/docs/man/html/eglDestroyContext.xhtml):
"If the EGL rendering context is not current to any thread,
eglDestroyContext destroys it immediately."
The context isn't current to any thread here because GlUtil calls
eglMakeCurrent with EGL_NO_CONTEXT before calling eglDestroyContext.
So everthing should be released once the FrameProcessorChain's
release task terminates.
PiperOrigin-RevId: 442807484
* Group what's now many related test PNGs by moving them to their own directory.
* Move bitmap references to files where they're used, as each bitmap is only
used once each, except the original bitmap.
PiperOrigin-RevId: 441485489
Scaling and rotation using ScaleToFitFrameProcessor may change the
the resolution and aspect ratio, so defaulting to the same as the
input is no longer accurate.
PiperOrigin-RevId: 441463349
What a minimal implementation should include is now explained in the
interface javadoc while the method name reflects what the method does.
PiperOrigin-RevId: 441432059
The stream with the mp3 track is added because
- We only encode to AAC
- We only encode when the source track is not AAC
Now that we have a way to force encoding, we no longer need the mp3 track.
The test asset is kept for later parameterized testing.
PiperOrigin-RevId: 440876080
The MIME type was set to H265 to force transcoding. Now that we have an encoder
factory that forces encoding, switching back to H264 ensures the quality test
is conducted on more devices (those don't support H265 can be tested now).
However, H265 should be part of the quality test after we have proper mechanism
to skip test based on device capability.
PiperOrigin-RevId: 440132471
The DefaultMediaNotificationProvider checks if a command is available
before putting the respective action in the notification.
PiperOrigin-RevId: 440114422
We don't currently have enough understanding of the correlation between a
specific SSIM score and video quality. Dropping to .90 to make most tests pass.
Especially when there's no discernible difference from the videos with .9 and
.95 SSIM.
PiperOrigin-RevId: 440047551
PeriodicDimmingFrameProcessor is an example of how a custom fragment
shader can be used to apply color changes that change over time.
PiperOrigin-RevId: 439840609
The matrix provider allows the transformation matrix to be updated
for each frame based on the timestamp.
The following example effects using this were added to the demo:
* a zoom-in transition for the start of the video,
* cropping a rotating rectangular frame portion,
* rotating the frame around the y-axis in 3D.
PiperOrigin-RevId: 439791592
We add an entire class like we do for parsing other codec initialization formats; it's currently not doing any parsing though (... initialization data is really simple for AV1 though: just the entire contents of the box).
For testing, we add the sample file, having been re-encoded with ffmpeg (and we also happen to have another av1 file, too).
PiperOrigin-RevId: 439453823
This allows apps to use AdvancedFrameProcessor to apply transformations
in 3D space. This functionality is not used in transformer otherwise.
PiperOrigin-RevId: 439313406
The encoder surface is no longer needed for the OpenGL setup and frame
processor initialization, as a placeholder surface is used instead. So
all of the setup can now be done in the factory method.
PiperOrigin-RevId: 438844450
App code should get all of this information from TrackGroupInfo,
and should only need TrackGroup as a key to use for overrides.
PiperOrigin-RevId: 438840925
This allows the MuxerWrapper to keep using trackTypeToTimeUs for
calculating the video duration but slightly changes the meaning of
its interleaving constraints.
PiperOrigin-RevId: 438780686
This provides better compatibility with MediaExtractor, which does read these fields; we also need them for being able to mux file contents into another mp4 file.
Also, there is a minor refactor included so that we have an actual type for esds box contents instead of a pair.
PiperOrigin-RevId: 438673825
The placeholder surface is either EGL_NO_SURFACE or a 1x1 pbuffer
depending on whether the device supports EGL_KHR_surfaceless_context.
PiperOrigin-RevId: 438541846
Since the output textures and surfaces are managed by the
FrameProcessorChain, clearing them there makes sense.
This is also less error-prone as it might not be obvious to
someone implementing a GlFrameProcessor that they need to
glClear. (Clearing twice won't cause any problems.)
PiperOrigin-RevId: 438532247
This is basically 'container' and 'subtitle' MIME types
I previously avoided stabilising any 'custom' MIME types (those
containing '/x-') but it certainly seems reasonable to expect
developers to use APPLICATION_M3U8 and so then it also makes sense
to stabilise other 'similar' custom MIME types too.
PiperOrigin-RevId: 438501642
This change adds the ability to update the error code of the PlaybackStateCompat in
cases we need this for backwards compatibility. It is applied in the least
intrusive way because normally, return values of a service method should not change
the state of the `PlaybackStateCompat`, just because it has nothing to do with the
playback state but rather with the state of the `MediaLibrarySession`.
For this reason only the error code `RESULT_ERROR_SESSION_AUTHENTICATION_EXPIRED`
is taken into account while all other error codes are not mapped to the
`PlaybackStateCompat'.
PiperOrigin-RevId: 438038852
This requires an additional nanos to micros conversion because
the SurfaceTexture uses nanos. But as the timestamps from the
MediaCodec decoder (propagated in DefaultCodec#releaseOutputBuffer) are
in microseconds no precision is lost here.
Also add test that checks output video duration.
PiperOrigin-RevId: 438010490
MAXIMUM_AVERAGE_PIXEL_ABSOLUTE_DIFFERENCE was copied from a test
class, but BitmapTestUtil isn't a test. So the javadoc needs
rewording to reflect that.
PiperOrigin-RevId: 438001833
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
From Android T onwards `MediaCodec` supports requesting tone-mapping down to
SDR. Add an option to request this behavior and document that it isn't
supported before T. Also add an option in the demo app to try it out.
Tested manually on a prerelease build.
PiperOrigin-RevId: 437765325
The thread name is used to verify the thread in both createOpenGlObjectsAndInitializeFrameProcessors() and processFrame().
Also remove glThread field that was only used for this verification.
PiperOrigin-RevId: 437730804
Since the output size can be overridden, the viewport should be
ouputWidth/Height and NOT the ExternalCopyFrameProcessor's output size
which matches the input size.
PiperOrigin-RevId: 437256635
* The AdvancedFrameProcessor calls use() in updateProgramAndDraw().
* The AdvancedFrameProcessor has the same input and output dimensions.
PiperOrigin-RevId: 437231350
On some devices, decoding gets stuck when the number of frames pending at the
`SurfaceTexture` is too high. We added a workaround that only allows one frame
to be pending at a time. That fixed the issue, however, based on on-device
testing it seems that it's safe to queue more than one frame.
Add a method that returns a safe estimate of the number of frames that can be
pending at a time, and use this to limit the number of frames that can be
released from the decoder but not processed by the frame processor chain.
PiperOrigin-RevId: 437057075
Configuring the frame sizes between frame processors is now the
FrameProcessorChain's rather than the caller's responsibility.
The caller can getOutputSize() and override it for encoder fallback
in configure().
PiperOrigin-RevId: 437048436
The factory method is replaced by a public constructor and
configure() method which configures the input/output surfaces
and handles the OpenGL setup.
This is a prerequisite for removing the responsibility of the
caller to configureSizes() before creating the chain in a follow-up.
PiperOrigin-RevId: 437028882
This allows us to bypass many device-specific issues, that only occur when
decoding directly to an encoder surface, without OpenGL. This also allows us
to maintain fewer code branches, which require additional testing to verify
correctness.
PiperOrigin-RevId: 437003138
Allow apps to modify how frames are presented, via modifying resolution.
A follow-up CL will provide aspect ratio, cropping, etc.
PiperOrigin-RevId: 436963312
* These grouping parentheses are unnecessary; it is unlikely the code will be misinterpreted without them
(see http://go/bugpattern/UnnecessaryParentheses) (11 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 436726763
SEF is similar to frame editing, where the input and output videos are
not intended to match, so SSIM will not provide a reliable value. To
check SSIM correctly in future, we would need to provide
golden/expected video files to compare output against.
PiperOrigin-RevId: 436707240
The FrameProcessorChain manages a List<GlFrameProcessor>.
FrameProcessorChainDataProcessingTest now tests chaining ScaleToFit-
and AdvancedFrameProcessors.
PiperOrigin-RevId: 436468037
This currently causes the test to fail on Pixel 6 Pro running a recent S build
SQ1D.220205.004.
There is no need to test audio transcoding while we are measuring video
quality.
PiperOrigin-RevId: 435635314
With this change, the MediaNotificationManager stops MediaSessionService
and hides any notifications if the player has no media items or the
player hasn't been prepared yet.
PiperOrigin-RevId: 435349363
ExternalCopyFrameProcessor's output dimensions match the input
size not the output size. So the intermediate texture size
should match the input size.
Also rename configureOutputDimensions to configureOutputSize.
PiperOrigin-RevId: 435058789
More info: go/lsc-assertthrows and go/assertthrows
NOTE: if the source of truth for this code is _NOT_ `//third_party/`, please ask for this CL to be reverted.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:434925976:BASE:434869111:1647399186064:de338189
PiperOrigin-RevId: 435047509
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
Use android.util.Size, whose naming is much easier to understand than Pair<Integer, Integer>, in both FrameProcessor and EncoderUtil.
PiperOrigin-RevId: 434813986
* Move auto-adjustments for transformation matrices from the
VideoTranscodingSamplePipeline constructor to the new
ScaleToFitFrameProcessor.
* Add GlFrameProcessor#getOutputDimensions() to allow for GlFrameProcessors with
different input and output dimensions. This is a prerequisite for
Presentation.
* Tested with unit tests (and manually just in case).
* A follow up CL will implement change the FrameProcessor input to be scale and
rotate values as requested by the user. This was kept out of this CL to
reduce CL review size. Presentation will also be implemented in a follow up
CL.
PiperOrigin-RevId: 434774854
As pointed out in a previous review, createFallbackTransformationRequest
can be a bit confusing to parse.
Added javadocs and renamed parameters appropriately, to make it slightly
more easy to understand.
PiperOrigin-RevId: 434733313
Added PCM RTP packet reader and added support for PCM 8 bit,
16 bit, ALAW and MULAW playback through RTSP.
Change-Id: If0a187b55faa89850a159e17eae28358d6634799
*** Original commit ***
Rollback of aa22bc2dbe
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClick...
***
PiperOrigin-RevId: 434502423
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
The variable marks the coordinates used to sample from a texture, so hopefully
this makes the naming a bit more descriptive.
This renames vTexCoords and aTexCoords. No functional changes intended.
PiperOrigin-RevId: 433499934
This fixes an exception thrown when parceling becasue the type can not be found
(expects the AdsPlaybackState to be Serializable). Transforming the map and the
ad playback states to a Bundle fixes the problem.
#minor-release
PiperOrigin-RevId: 433491993
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
If an OpenGL call blocks because the encoder's input surface is full,
this will now block the background thread while the main thread can
continue querying encoder output and free up encoder capacity until
it accepts more input unblocking the background thread.
PiperOrigin-RevId: 433283287
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClickListener when
useController is false.
3. Delivery of events to a registered OnLongClickListener
in all configurations.
4. Incorrectly treating a sequence of touch events that
exit the bounds of the vi...
***
PiperOrigin-RevId: 433262414
This change makes all notification actions start MediaSessionService
in the background except COMMAND_PLAY which starts the service
in the foreground. This is to avoid ANRs that are raised if we don't
call MediaSessionService.startForeground() within 5 seconds since the
service was started in the foreground.
We only call MediaSessionService.startForeground() when
Player.getPlayWhenReady() returns true, and only COMMAND_PLAY sets
playWhenReady to true.
Issue: androidx/media#20
#minor-release
PiperOrigin-RevId: 433229604
With the new version, we try the following before fixing resolution:
- Fix size alignment
- Try 3/4 the width and height
- Try 2/3 the width and height
- Try 1/2 the width and height
Also: align the resolution ends in 1 or 9 to 0.
PiperOrigin-RevId: 433206358
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClickListener when
useController is false.
3. Delivery of events to a registered OnLongClickListener
in all configurations.
4. Incorrectly treating a sequence of touch events that
exit the bounds of the view before ACTION_UP as a click,
both for delivery to OnClickListener and for toggling
the controls.
Note: After this change, control visibility will not be
toggled if the application developer explicitly sets the
view to be non-clickable. I think that's probably working
as intended though. It seems correct that a non-clickable
view would not respond to clicks.
Issue: google/ExoPlayer#8627
Issue: google/ExoPlayer#9605
Issue: google/ExoPlayer#9861
PiperOrigin-RevId: 433016626
This change rewrites the UI module's track selection
components to depend on the Player API, allowing us to
finally remove the UI module's dependency on ExoPlayer
as a concrete player implementation.
PiperOrigin-RevId: 432989318
Previously, we've used getSupportedHeights/Widths() to find the supported
resolution. However, the height/width can be over-reported when using these
APIs. For example, getSupportedWidths and getSupportedHeights can both return
3840, but the supported height when using 3840 as width is only 2160.
PiperOrigin-RevId: 432926192
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
(cherry picked from commit c7c7517322)
This change fixes two bugs where MediaSessionServe shows a notification
with the Play icon but tapping it will not start playback:
1. After playback ends: we need to seek to the beginning of the media
item.
2. After adding media items to the player but not starting playback:
We need to call Player.prepare() too.
PiperOrigin-RevId: 432469953
(cherry picked from commit 1023b9d55e)
These should have been removed as part of 1391b7c65d, since we no
longer officially support overriding the layout file for this class.
This class is known as StyledPlayerView in exoplayer2.
#minor-release
PiperOrigin-RevId: 432411322
(cherry picked from commit a353b3332a)
The MockPlayer has a single CountDownLatch field and multiple boolean
flags that track if a player method was called. Upon calling the methods
the latch count. Tests set the latch count to match exactly with the
number of expected player interactions then block the test thread until
the latch reaches zero and assert the respective method flags are true.
This is subject to false positives. If the underneath implementation
changes and call more player method, then the test thread will unblock
as soon as a certain number of interactions is performed, which may be
less than what the test expected originally. However, the test may stil
pass if the player thread had enough time to update the expected method
flag.
This change removes the single CountDownLatch and the boolean flags and
instead it adds APIs to query the MockPlayer if a method has been called
and await until a method is called. Internally, the MockPlayer has a
ConditionVariable per method.
PiperOrigin-RevId: 432399077
(cherry picked from commit 45d512160c)
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
(cherry picked from commit 232f2d815d)
This is consistent with the new MediaSessionStub that accepts page index 0
and the JavaDoc of legacy and new service callbacks.
Issue: androidx/media#32
PiperOrigin-RevId: 431390454
(cherry picked from commit 9821dd282c)
When a live stream is joined while ads are already playing, the LOADED event is
missed and we don't have ad information for those ads in the ad group that are
before the ad index at which we joined. This way we can clip the duration when we
receive the LOADED event for the last ad in the group. This fixes the problem of
the playback controls being hidden when content resumes after the ad group.
#minor-release
PiperOrigin-RevId: 431269627
(cherry picked from commit 8e8c59031c)
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
We will be migrating our track selection UI components to be
based on TracksInfo. We need DownloadHelper to expose TracksInfo
to make it compatible with such components.
PiperOrigin-RevId: 432474487
This change fixes two bugs where MediaSessionServe shows a notification
with the Play icon but tapping it will not start playback:
1. After playback ends: we need to seek to the beginning of the media
item.
2. After adding media items to the player but not starting playback:
We need to call Player.prepare() too.
PiperOrigin-RevId: 432469953
addTrackSelectionForSingleRenderer takes a list of legacy overrides,
which are then set on the supplied parameters one at a time to run
track selection. This allows multiple overrides for a single track
type to be applied in the download use case, despite it not being
possible to place such overrides directly into a single parameters.
For new style overrides, multiple overrides for the same track type
can be placed directly into a single parameters. Therefore we'll be
able to replace use of addTrackSelectionForSingleRenderer with use
of addTrackSelection, which is a much cleaner API. For this to work,
we need to make DownloadHelper apply multiple overrides in this case.
PiperOrigin-RevId: 432459834
This will allow for easier customisation of the additional tasks
performed by the test runner, such as calculating metrics like SSIM.
PiperOrigin-RevId: 432434850
These should have been removed as part of 1391b7c65d, since we no
longer officially support overriding the layout file for this class.
This class is known as StyledPlayerView in exoplayer2.
#minor-release
PiperOrigin-RevId: 432411322
The MockPlayer has a single CountDownLatch field and multiple boolean
flags that track if a player method was called. Upon calling the methods
the latch count. Tests set the latch count to match exactly with the
number of expected player interactions then block the test thread until
the latch reaches zero and assert the respective method flags are true.
This is subject to false positives. If the underneath implementation
changes and call more player method, then the test thread will unblock
as soon as a certain number of interactions is performed, which may be
less than what the test expected originally. However, the test may stil
pass if the player thread had enough time to update the expected method
flag.
This change removes the single CountDownLatch and the boolean flags and
instead it adds APIs to query the MockPlayer if a method has been called
and await until a method is called. Internally, the MockPlayer has a
ConditionVariable per method.
PiperOrigin-RevId: 432399077
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
DownloadHelper is in the ExoPlayer module, so there's no reason
why it can't use ExoPlayer specific track selections. That said,
we want our UI components to operate on generic
TrackSelectionParameters, and we want such UI components to be
useful for selecting tracks for download. To keep this interop,
it's necessary to have DownloadHelper accept generic
TrackSelectionParameters, or to require application code to
convert them. The first approach seems preferable!
PiperOrigin-RevId: 432158846
This constructor always does the wrong thing for non-adaptive groups
containing more than 1 track, because it'll incorrectly generate an
adaptive selection. Replace it with a constructor for specifying a
single track within the group instead.
PiperOrigin-RevId: 431673458
Only log GL exceptions in GlUtil if they aren't thrown. Otherwise,
it's up to the caller whether or not to log them to avoid logging them
twice.
PiperOrigin-RevId: 431657397
This test tests the same cases as the FrameEditorDataProcessingTest
as currently the main FrameEditor functionality is to apply a
transformation matrix using a TransformationFrameProcessor.
PiperOrigin-RevId: 431642066
As evidenced by the somewhat awkward logic in PlayerControlView, the
previous design wasn't very friendly to expected usage. There will be
more usage when the track selection dialog components are migrated,
which would be similarly awkward without this change.
PiperOrigin-RevId: 431407675
This is consistent with the new MediaSessionStub that accepts page index 0
and the JavaDoc of legacy and new service callbacks.
Issue: androidx/media#32
PiperOrigin-RevId: 431390454
When a live stream is joined while ads are already playing, the LOADED event is
missed and we don't have ad information for those ads in the ad group that are
before the ad index at which we joined. This way we can clip the duration when we
receive the LOADED event for the last ad in the group. This fixes the problem of
the playback controls being hidden when content resumes after the ad group.
#minor-release
PiperOrigin-RevId: 431269627
We use SSIM to measure the transcoding quality between. SSIM is a widely used
tool that compares the luma channel between two images, and generates a score
from 0 to 1 that indicates "how similar" the two images are.
In `SsimHelper`, we decode the two videos, extract matching frames and
calculates the mean SSIM (SSIM averaged all matching frames) for both videos.
Matching frames are referred to as "comparisonFrame" in the CL, which is
selected based on the frame number and a user-set comparison interval.
For instance, if the interval is 7, then every seventh frames are compared.
We use MediaCodec/MediaExtractor to decode the video, and use ImageReader to
extract the decoded frame.
The SSIM calculation logic is a inspired by and modified from the CTS
[MSSIMMatcher](https://cs.android.com/android/platform/superproject/+/master:cts/tests/tests/uirendering/src/android/uirendering/cts/bitmapcomparers/MSSIMComparer.java;l=1?q=mssimcom)
that has some errors and extra features we don't need (like handling RGB
images).
Adds TranscodeQualityTest to ensure high quality transcoding.
PiperOrigin-RevId: 430951206
*** Original commit ***
Rollback of caf62842c4
*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
PiperOrigin-RevId: 430905772
The AsyncronousMediaCodecAdapter should call MediaCodec.start()
on the same thread it calls MediaCodec.flush(), i.e. the playback
thread. This change removes the experimental flag that allowed
calling MediaCodec.start() from the callback thread.
The flag was flipped to true already.
PiperOrigin-RevId: 430689665
We need to access internal state to work around resources not being released on
old API versions. Add a reference to the bug about this and suppress the lint
warning.
#minor-release
PiperOrigin-RevId: 430190794
We need to access internal state to work around resources not being released on
old API versions. Add a reference to the bug about this and suppress the lint
warning.
#minor-release
PiperOrigin-RevId: 430190794
All (later customizable) GlFrameProcessors after the
ExternalCopyFrameProcessor receive their input from a normal OpenGL
texture not an external texture, so they won't need to worry about
the textureTransformMatrix.
PiperOrigin-RevId: 430165652
getCurrentTrackGroups and getCurrentTrackSelections are
retained for now, but moved from Player to ExoPlayer, to
ease the transition for some application code that currently
uses these methods.
PiperOrigin-RevId: 430036355
There are two major blockers to this test:
- H265 muxing is not available for API<24, so setting video mimeType to H265
will fail on those devices.
- AMR audio encoding is buggy on some device and it's not a widely used format.
The solution: use a video that is encoded with AVC/MP3, to ensure transcoding
to AVC/AAC.
PiperOrigin-RevId: 429648598
Re-enable tests that have no muxer support for timestamps going backwards.
Tests running on the B-frame sample will be added in a future commit.
#mse-bug-week
PiperOrigin-RevId: 429599177
*** Original commit ***
Rollback of c2cb22a056
*** Original commit ***
Rollback of 1521e50307
*** Original commit ***
Wire up MediaMetricsListener and add configuration to...
***
PiperOrigin-RevId: 429585773
- The resources were released twice before, which is not necessary since
the MSG_RELEASE message is already in the internal player queue.
- The demo app was failing because the stop watch was stopped in
onTransformationError after being reset.
#minor-release
#mse-bug-week
PiperOrigin-RevId: 428794426
Currently only a single instance of ImaServerSideAdInsertionMediaSource is
supported at the same time in a playlist. This change makes sure that an
attempt to add multiple instances is prevented by throwing a an exception.
#minor-release
PiperOrigin-RevId: 428743140
This change makes sure played server side ads are skipped in a single period
timeline. It avoids creating an ad-MediaPeriodInfo for played postrolls and
creates a content info instead. It also sets the end position for content infos
that terminate the stream before the stream is actually finished. This prevents
the player from continue playing the remaining media delivered by the
MediaPeriod.
We also make sure that the discontinuity of played ads are not reported because
there is actually no discontinuity.
#minor-release
PiperOrigin-RevId: 428734387
This prevents a stack trace that is shown in the logs when the stream manager is
released after the activity was stopped. In this case the call to
`streamManager.destroy()` coming from `releaseSourceInternal()` of the media
source is too late and produces an error saying `Application attempted to call on
a destroyed WebView`. The error has no effect but it's nice to not have this
stack trace in the logs.
PiperOrigin-RevId: 428574231
The last used shared media period is reused after all media periods have been
released. In case the sample streams are already filled up, they need to be
reset or they download samples from the current position up to the seek
position. This causes long buffering states or load stuck exceptions.
A seek when reusing the shared period takes care for reseting the period or
internally seeks to the current position in the already available samples.
#minor-release
PiperOrigin-RevId: 428484187
We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
The timeline used to map ad groups to periods needs to report the original content period duration without subtracting the serverside inserted ad duration. When marking played ads in onPositionDiscontinuity, the public timeline has been used which crashed the app when the ads media source is playing on a window index different to zero (in a playlist).
#minor-release
PiperOrigin-RevId: 428465833
Define MediaNotification.Provider so that apps can customize
notification UX. Move MediaNotificationManager's functionality
around notifications on DefaultMediaNotificationProvider
PiperOrigin-RevId: 428024699
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
This adds some missing calls to verifyApplicationThread to
ExoPlayerImpl.
Now all public methods start with this call, except listener
registrations because registration after construction on a background
thread is allowed and supported.
PiperOrigin-RevId: 428009498
All the functionality of SimpleExoPlayer has moved to ExoPlayerImpl.
Hence, ExoPlayerImpl can fulfil its own name and become an ExoPlayer
implementation. As a result, ExoPlayer.Builder can return ExoPlayerImpl
directly without using SimpleExoPlayer at all.
PiperOrigin-RevId: 427947028
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
Right now, the option to build an IMA DAI URI programmatically is still
package-private. To simplify the process, we can remove the StreamRequest
wrapper and directly provide an URI builder.
The same class can provide some package-private helper methods to parse the
created URI.
#minor-release
PiperOrigin-RevId: 427445326
There are two sets of listeners in ExoPlayerImpl at the moment,
which can be merged together to use a single ListenerSet. This has
the added advantage that the events that were previously sent
through the ArraySet get additional guarantees provided by ListenerSet
(e.g. correct event ordering and onEvents triggered).
Also add missing constants for onEvents to ensure all Player.Listener
methods have an corresponding constant.
#minor-release
PiperOrigin-RevId: 427415349
This brings listener invocations closer together and removes
unnecessary methods.
Also fixes a bug where a change in track selection parameters only
queued a callback but never flushed it to actually inform the
listeners.
#minor-release
PiperOrigin-RevId: 427201691
In some cases (whose where we previously used EventListener),
AnalyticsCollector is registered as a listener to receive updates,
in other cases it is called directly.
Avoid this inconsistent handling by registering it as normal listener
and removing all callbacks that are handled by the normal listener flow.
The remaining direct usages of AnalyticsCollector calls are those
callbacks that have no equivalent in Player.Listener.
#minor-release
PiperOrigin-RevId: 427201525
With this change, MediaCodecAudioRenderer always configures MediaCodec
with max output channels set to 99 on API 32+.
#minor-release
PiperOrigin-RevId: 427192801
SimpleExoPlayer used to register a listener on ExoPlayerImpl for
the old EventListener callbacks. Now both classes are merged, this is
no longer needed and should be removed in favor of calling methods
directly.
#minor-release
PiperOrigin-RevId: 427187875
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
*** Original commit ***
Rollback of d93b0093ae
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet...
***
PiperOrigin-RevId: 427131338
*** Original commit ***
Move SimpleExoPlayer logic into ExoPlayerImpl
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (e
***
PiperOrigin-RevId: 426997821
Some strings didn't mention the context in which they are used
(for example as item in a list, or for accessibility). This makes it
harder for translators to choose the most appropriate translation and
grammar.
Also fix repeat and shuffle mode button accessibility descriptions to
indicate the action, not the current state.
PiperOrigin-RevId: 426924163
This ensures Kotlin usages of these IntDef annotations in the 'old'
position will continue to compile.
'Frequently used' is a subjective judgement. I have a parallel change
that marks all the other public IntDefs in the library as TYPE_USE
(those that I've judged to be 'rarely used' by apps).
A follow-up change will fix the positions of existing usages to be as if
they're only TYPE_USE.
#minor-release
PiperOrigin-RevId: 426427334
This is a breaking change if the annotation itself is in use in Kotlin
code. It's judged that the IntDefs in this commit are unlikely to be
referred to often in Kotlin code. This is because they're either:
- Related to esoteric parts of the library, or
- In a common part of the library but only returned from methods (and
never passed to callback methods).
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426410237
This is not backwards compatible if the @SelectionReason annotation is
used in Kotlin code, but before this change there aren't many library
surfaces that return a value annotated with @SelectionReason, so it
seems relatively unlikely that it is in use in any/many apps.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426409877
This is only used inside AudioFocusManager, it doesn't need to public.
Also mark it TYPE_USE and update the position to match.
#minor-release
PiperOrigin-RevId: 426407790
This is only used in DefaultAudioSink, so we could move it there and
make it private - but at that point we might as well refer to the
underlying AudioManager constants instead.
#minor-release
PiperOrigin-RevId: 426407661
Keep values related to LegacyPlayerView in attrs_legacy_player_view.xml
and put all values related to LegacyPlayerControlView back in their
original locations. We plan to remove LegacyPlayerView (and
attrs_legacy_player_view.xml) from media3, but will keep
LegacyPlayerControlView - so the separation of the XML files needs to
reflect this split.
#minor-release
PiperOrigin-RevId: 426406973
This only changes IntDefs that cannot be used by apps because they're
either private or package-private.
A follow-up change will fix the positions of existing usages to match
this new config.
#minor-release
PiperOrigin-RevId: 426372273
This makes the delegation model more explicit, and prevents the javadoc
compiler from just pulling in the Player javadoc automatically - which
can lead to some confusion when some method definitions in Player depend
on other methods (e.g. seekForward() is defined in terms of
getSeekForwardIncrement()).
Issue: google/ExoPlayer#9897
#minor-release
PiperOrigin-RevId: 426359004
These were messed up in 74c6ef9ba0
Also suppress deprecation warnings when we're just forwarding a
deprecated method to the delegate.
#minor-release
PiperOrigin-RevId: 426351791
The longer list of targets is only necessary for backwards
compatibility with existing Kotlin code that will stop compiling
if the position of the annotation becomes 'wrong' by marking it only
TYPE_USE. Since none of these IntDefs have been released (except in
media3 alpha1) we don't need to maintain this compatibility.
Also add a comment to all the places that *do* need the longer list of
targets, in order to explain why it's there and discourage copy-pasting
when defining new IntDefs in future.
Also fix some single-element arrays to remove the array notation.
#minor-release
PiperOrigin-RevId: 426108537
Remove most of the customisation documentation, since StyledPlayerView
isn't really designed to be customised as deeply as PlayerView.
Also remove most documentation around StyledPlayerControlView,
especially as a standalone controller class - since it doesn't work
well for this use-case.
#minor-release
PiperOrigin-RevId: 426090762
This allows the same DefaultMediaSourceFactory instance to be used as
the contentMediaSourceFactory inside
ImaServerSideAdInsertionMediaSource.
PiperOrigin-RevId: 425846609
This makes SimpleExoPlayer a simple forwarding wrapper which can be
removed in the future.
The changes are all purely mechanical with none of the potential further
simplifications made yet. The only exceptions are name clashes where
either EPI or SEP was calling a method in one of the classes and both
classes had different implementations for the same method name. In these
cases we needed to disambiguate between the two different
implementations (example: ExoPlayerImpl.setListener was renamed to
setEventListener).
#minor-release
PiperOrigin-RevId: 425823095
Tested by confirming transformations still work and write to a output file in a
scoped-storage directory on a:
* Nexus 6P API 23 emulator
* Google Pixel 4 API 31 physical device
PiperOrigin-RevId: 425644266
In some cases we create empty playback metrics with no corresponding
events (e.g. when an app seeks to a new media item and immediately
releases the player). There is no benefit in having completely empty
metrics entries, so it's cleaner to not report them in such cases.
#minor-release
PiperOrigin-RevId: 425609010
- Add a checkbox in the demo app to enable experimental HDR editing.
- Add an `experimental_` method to `TransformationRequest` to enable HDR editing.
- Add fragment/vertex shaders for the experimental HDR pipeline. The main difference compared to the existing shaders is that we sample from the decoder in YUV rather than RGB (because the YUV -> RGB conversion in the graphics driver is not precisely defined, so we need to do this to get consistent results), which requires the use of ES 3, and then do a crude YUV -> RGB conversion in the shader (ignoring the input color primaries for now).
- When HDR editing is enabled, we force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
PiperOrigin-RevId: 425570639
We use the `createForCodec` method that does not take a `MediaFormat` during
transformation, the error message always includes "no configured MediaFormat",
which is false.
PiperOrigin-RevId: 429553573
isTypeSupportedOrEmpty is very specific and a little hard to
understand unless you know the one thing it's useful for. This
commit replaces it with isTypeSupported, which can be used in
conjunction with the recently added containsType method.
PiperOrigin-RevId: 429312712
The track type is derived solely from the content. It does
not depend on any runtime properties such as the player's
capabilities of user track selection. Hence it belongs in
TrackGroup rather than TrackGroupInfo.
Note that this avoids TrackSelectionOverride from having to
re-derive the track type internally.
PiperOrigin-RevId: 429303312
Calling `MediaMuxer.writeSampleData` can block indefinitely on old API versions. It is better not to call this method to fail quickly with an exception rather than getting stuck.
Based on on-device testing media muxer doesn't generally handle out of order samples before API 25. There are a small number of devices where this does succeed but it seems preferable to turn this off everywhere to keep the code simple and have consistent behavior. Once we switch to in-app muxing this limitation will no longer apply.
#mse-bug-week
PiperOrigin-RevId: 429070255
Tested:
Verified that the additional information is available through
instrumentation tests, as well as via manual testing.
#mse-bug-week
PiperOrigin-RevId: 429038695
Create BitmapLoader component for loading artwork
images. Add the SimpleBitmapLoader which fetches images
from HTTP/HTTPS endpoints. Integrate BitmapLoader in
DefaultMediaNotificationProvider.
PiperOrigin-RevId: 429010249
- The resources were released twice before, which is not necessary since
the MSG_RELEASE message is already in the internal player queue.
- The demo app was failing because the stop watch was stopped in
onTransformationError after being reset.
#minor-release
#mse-bug-week
PiperOrigin-RevId: 428794426
We need TracksInfo.hasTracksOfType to determine which tabs to
display in TrackSelectionDialog.
We need TrackGroupInfo.isAdaptiveSupported to determine whether
to allow multiple selection (check boxes) or not (radio buttons).
PiperOrigin-RevId: 428793739
The GlFrameProcessor handles everything related to the GLSL program,
the FrameEditor manages the GL context and the data flow including
the input SurfaceTexture and output EGLSurface.
This will be split up further in follow-up CLs so that
GlFrameProcessors can be chained. At this CL, there are no
functional changes intended.
PiperOrigin-RevId: 428779179
