*** Original commit ***
Handle int instead of byte in SSIM.
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
***
PiperOrigin-RevId: 473259446
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
PiperOrigin-RevId: 473231779
Test that HDR editing succeeds on devices supporting HDR editing, tone maps on
devices supporting tone mapping, and throws exceptions on all other devices.
Also, only restrict HDR editing and tone mapping support to API 31+ only when
transcoding, not for all transformations.
PiperOrigin-RevId: 472958965
The exception fires when intent resolution fails to find a service which declares an appropriate intent-filter. The existing message is confusing; it's trying to say that the service couldn't be found but the double negative renders it incorrect.
#cleanup
#minor-release
PiperOrigin-RevId: 472736740
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (2 times)
* This catch block catches an exception and re-throws another, but swallows the caught exception rather than setting it as a cause. This can make debugging harder.
(see http://go/bugpattern/UnusedException)
* This comment contains Javadoc or HTML tags, but isn't started with a double asterisk (/**); is it meant to be Javadoc?
(see http://go/bugpattern/AlmostJavadoc)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472255768
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472252461
The assertion asserts against a `Period` and an `AdPlaybackState` which actually
asserts against a resolved ad which is what `ExoPlayerImplInternal` does later and
what gives us a `SEEK_ADJUSTMENT`. However, this assertion is not required at the
moment of masking, because we are sure that the resolved seek results in a content
period and never an ad period.
#minor-release
Issue: androidx/media#122
PiperOrigin-RevId: 471827072
shouldPassthrough's internal checks seem to be check whether we should *not*
pass through, which seemed a bit like a confusing double-negative to me.
shouldTranscode is slightly more clear, by instead returning true when we do
want to transcode.
No functional changes intended.
PiperOrigin-RevId: 471753771
3b0d2c1586 made `shouldPassthrough` always return false for `enableHdrVideoEditing`:
>We force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
However, this was introduced before the `videoNeedsEncoding` setting was introduced in 3f615040c0. That setting should apply to HDR videos as much as SDR videos.
PiperOrigin-RevId: 471569853
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471198016
In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.
PiperOrigin-RevId: 471037733
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 470953422
TL;DR: we should check if there are new frames available to queue to the
ExternalTextureProcessor before actually queueing a frame.
The overall flow on the external texture processor:
- `SurfaceTexture.onFrameAvailable` is called on `ExtTexMgr`, and
- it calls `updateTexImage()`, and sets `frame`
- it calls `maybeQueueFrameToExtTexProc()`
- the frame is queued to `ExtTexProc` if `frame` is set
- From `ExtTexProc.queueInputFrame()`:
- notifies the `frameProcessorListener` of available frame
- notifies the `inputListener` of `onReadyToAcceptInputFrame`
- (`ExtTexMgr` is the listener), it calls `maybeQueueFrameToExtTexProc()`
again
-- Parallelly --
- `ExtTexProc` calls `inputListener.onInputFrameProcessed`, when the frame is
released
- (`ExtTexMgr` is the listener), sets `frame` to `null`
*Problem*
This logic relies on `frame` to be cleared at the right time.
In transformer, it's OK b/c `ExtTexProc` release the frame immediately in
`queueInputFrame()` and calls `onInputFrameProcessed` which also reset `frame`
But in previewing, the frame is not released for a while, up to 10 ms.
In this case, `frame` will not reset in this 10 ms, and
`maybeQueueFrameToExtTexProc()` is repeatedly queueing the same input frame.
PiperOrigin-RevId: 470211620
Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.
Also, swap the OETF and EOTF in shaders, as they were used incorrectly before
Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.
PiperOrigin-RevId: 469736067
Remove the manual overwriting of Note ON events that have 0 velocity with Note OFF. JSyn handles this already.
- The implementation of "running status" means that the amount of bytes read from the file differ from the size of the sample that ends up in the decoder. The decoder sample contains the applied running status (status of previous event), which the file bytes don't contain.
PiperOrigin-RevId: 468537659
Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.
More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.
PiperOrigin-RevId: 468473072
Manually tested using transformer demo HLG videos. Before this CL, RGB values after the YUV to RGB conversion reached up to 1.025. After this CL, RGB values correctly clamp at 1.0.
PiperOrigin-RevId: 468426092
FrameProcessingTaskExecutor should be released on error.
There can be a delay until this happens, so
FrameProcessingTaskExecutor will cancel any pending tasks
and drop new tasks until it is released.
PiperOrigin-RevId: 468171820
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
This is needed as a pre-requisite for allowing MCVR to control
FrameProcessor frame release for previewing.
Submitting a high-priority task is conceptually different from
posting at the front of a single queue of tasks, as the high-priority
tasks are executed in FIFO order among themselves. This will ensure
that frame release tasks submitted in close succession are executed
in the order they are submitted but before any lower priority tasks.
PiperOrigin-RevId: 467675137
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
The specified CMake version doesn't work with the latest
Android Studio releases. Updating to a more recent version
fixes the problem.
Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467634063
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
When the player finishes playback and reaches the STATE_ENDED,
the notification remains visible with a pause button and the
service is kept in the foreground. This is a bug.
With this change, when the player reaches the STATE_ENDED, the
service is stopped from the foreground and a notification is shown
with a play button. If the play icon is tapped, the player will restart
playback of the last played item. Playing the last played item again
is the existing behavior when play/pause commands are received from
the legacy MediaSession (e.g. BT headset buttons).
#minor-release
Issue: google/ExoPlayer#112
PiperOrigin-RevId: 467231509
* Rename all Rgba instances to Rgb.
* Remove alpha value from the RGBA Matrices and apply the 4x4 matrix
only to the R, G, B channels.
* Restore the alpha from the input unchanged.
PiperOrigin-RevId: 467208888
This change adds ExternalTextureManager which implements
InputListener to only queue input frames to the
ExternalTextureProcessor when it is ready to accept an input
frame. This replaces the old retry-logic in GlEffectsFrameProcessor.
Before this change, the retrying in GlEffectFrameProcessor wasted
CPU time if input becomes available faster than the
ExternalTextureProcessor can process it.
PiperOrigin-RevId: 467177659
From NDK 23.1.7779620 and above, the arm64-v8a ABI needs additional
build flags to correctly link the ffmpeg libraries.
Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467161973
In some cases, the IMA SDK fails to call the expected loadAd
event to load the next ad to play. This is (potentially) the
only remaining case where playback can get stuck due to missing
calls from IMA as the player doesn't even have a MediaSource at
this stage and is only waiting for IMA to provide the ad URL.
We can reuse the existing adPreloadTimeoutMs that was added for
a similar purpose (when preloading the first ad in the group).
The JavaDoc matches this purpose as well and the default timeout
is appropriate since we expect to get the loadAd call immediately.
Issue: google/ExoPlayer#10510
PiperOrigin-RevId: 466953617
createSupportedTransformationRequest is more accurate than
createFallbackTransformationRequest, as a TransformationRequest will be returned
regardless of whether any fallback is applied.
PiperOrigin-RevId: 466641277
This change adds a new method onReadyToAcceptInputFrame to
GlTextureProcesssor.InputListener and changes maybeQueueInputFrame
to queueInputFrame, removing the boolean return value.
This avoids the re-trying in ChainingGlTextureProcessorListener
by allowing it to only feed frames from the producing to the consuming
GlTextureProcessor when there is capacity.
MediaPipeProcessor still needs re-trying when processing isn't 1:1.
PiperOrigin-RevId: 466626369
Previously, this feature interpreted SDR signals as HDR when called. Now, only HDR
streams are interpreted as HDR, so the javadoc should be updated. Not yet removing
this method, as there are still some loose ends to finish up (ex. PQ support, e2e
tests).
PiperOrigin-RevId: 466425738
While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.
Therefore, it's more specific to mention just that the transfer is HDR.
PiperOrigin-RevId: 466316960
This simplifies ChainingGlTextureProcessor as it now only connects a
consuming and a producing GlTextureProcessor rather than a previous,
current, and next GlTextureProcessor.
Also use default no-op implementations of the listeners in
SingleFrameGlTextureProcessor and MediaPipeProcessor to avoid
null-checks.
PiperOrigin-RevId: 466301642
This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.
No functional change intended in this CL.
PiperOrigin-RevId: 466070764
In the case where this check fails, the downstream frame processor chain won't be able to handle the incoming (SDR) data anyway as we've already set it up for HDR.
PiperOrigin-RevId: 465584814
`requestCalculateSsim` more clearly represents the intention of the caller.
Also rephrase the javadoc to simplify it and make it more precise.
PiperOrigin-RevId: 465575578
* Add RgbaMatrix interface implementation.
* Add Builder class for easy adjustments.
* Adjust existing RgbaMatrixPixelTests to use new RgbAdjustment class.
PiperOrigin-RevId: 465545429
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
Format.NO_VALUE is a placeholder value for an invalid @C.ColorTransfer, used
for example when the decoder doesn't support this transfer function.
When encountering this invalid value, interpret this as COLOR_TRANSFER_SDR.
Confirmed locally that an exception is thrown when transcoding on p4head, and no exception is thrown when transcoding with this CL.
PiperOrigin-RevId: 464135080
This will allow effects preview in ExoPlayer to use the
Effect and FrameProcessor interface (and the interfaces
they depend on) without depending on transformer or the
future effects module.
PiperOrigin-RevId: 464060047
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
Despite unregistering the callback and clearing pending Handler
messages, the callback may still receive pending calls if they
are already triggered by the AudioTrack. Instead of asserting
that the track is correct, we should gracefully ignore stale
events.
PiperOrigin-RevId: 463851393
Once a controller bound to a MediaSessionService unbinds, this service
may be destroyed immediately if this was the last bound controller and
the service isn't started in the foreground.
At the time of releasing the controller, there may still be pending
commands that need to be handled by the session service. These commands
may cause the session service to post a foreground notification to
keep it alive. So to avoid the destruction of the service while these
commands are still handled, we need to keep the controller bound.
We also add a timeout in case the session tasks are never completed
by the session implementation. In case the controller is destroyed,
the unbinding happens automatically by the system.
PiperOrigin-RevId: 463802220
TransformationException error codes were previously tied to OpenGL
but other FrameProcessor implementations are possible. So this CL
renames the error codes.
Also, remove GL_INIT_FAILED error code, as FrameProcessor
implemenations may initialize resources on a background thread
after the factory method returns, so it's not obvious how to
distinguish between initialization failures and processing failures.
PiperOrigin-RevId: 463704902
Just a misc nit, since I found the name a bit confusing, and figured
findEncoderWithClosestSupportedFormat might be more descriptive.
PiperOrigin-RevId: 463433646
Extract a FrameProcessor.Factory interface from GlEffectsFrameProcessor
and allow it to be customized using a setter on Transformer.Builder.
PiperOrigin-RevId: 463433438
Size requires API 21. Using Pair instead will allow effects to be
used from API 18 during previewing once they are moved out of
transformer.
PiperOrigin-RevId: 463206474
This is needed for applying effects to a playlist.
The effects are applied based on the presentation time of the
frame in its corresponding media item and the offset is added
back before encoding.
Each time the offset changes, end of input stream is signalled
to the texture processors. This is needed because the texture
processors can expect monotonically increasing timestamp within
the same input stream but when the offset changes, the timstamps
jump back to 0.
PiperOrigin-RevId: 462714966
The DefaultMediaNotificationProvider caches the last loaded artwork
bitmap so that the bitmap isn't loaded again when the notification is
updated, e.g., the player is transiting from playing to paused. However,
loading bitmap requests for bitmaps that are already being loaded are
not suppressed. For example, if the notification is updated while the
artwork is still downloading, the same artwork might be downloaded
multiple times.
This change suppresses a bitmap load request if the same artwork is
still being loaded, to avoid additional artwork downloads.
#minor-release
PiperOrigin-RevId: 462572221
We currently clear all pending messages, including the one that flushes
pending commands to the MediaSession. To ensure all commands that have
been called before controller.release() are still sent, we can manually
trigger the flush message from the release call.
Related to handling the final flush because disconnecting the controller,
MediaSessionStub didn't post the removal of the controller to the
session thread, creating a race condition between removing the controller
and actually handling the flush.
Issue: androidx/media#99
PiperOrigin-RevId: 462342860
These constructors are currently very intertwined, passing `this`
references from the constructor of one to the constructor of another
before the first constructor is complete (and so the `this` reference
isn't really valid yet).
This change uses checker framework `@UnderInitialization` and
`@NotOnlyInitialized` annotations to make it more clear that the
references are not available yet. For the one 'direct' access needed
in the second constructor (calling `getApplicationLooper()`) we now
pass the `applicationLooper` directly alongside (to avoid needing to
dereference the reference 'too early').
This change also ensures that where a class hierarchy has a
'dependent' class hierarchy, the 'subclass' instance is always used
(by both subclass and superclass) without casting or manually hiding
the superclass field, by defining an overridable `getFoo()` method
instead and always using it.
#minor-release
PiperOrigin-RevId: 462335043
This allows us to use BT.2020 RGB linear for intermediate shaders, which also
allows us to re-enable PeriodicVignetteProcessor, which should work properly in
linear color-spaces.
Manually tested by adding a GlEffectsWrapper, and confirming that HLG HDR editing still looks correct.
PiperOrigin-RevId: 462265821
"seq" is not a well-defined abbreviation and the value is
also an integer, so sequenceNumber is better than just sequence.
PiperOrigin-RevId: 462129581
Add a Builder to constructor DefaultMediaNotificationProvider. The
Builder can also set the provider's:
- notification ID
- notification channel ID
- notification channel name
The change adds an API for apps to set the small icon in notifications.
#minor-release
Issue: androidx/media#104
PiperOrigin-RevId: 462111536
Some commands are run asynchronously and subsequent commands need
to wait until the previous one finished. This can be supported
by returning a Future for each command and using the existing
command execution logic to wait for each Future to complete.
As some MediaSessionStub code is now executed delayed to when it
was originally created, we also need to check if the session is
not released before triggering any actions or sending result codes.
Issue: androidx/media#85
PiperOrigin-RevId: 462101136
The commands currently use a task and a postTask that are chained
together manually. In some cases, e.g. when adding MediaItems,
the postTask is already a chain of commands in itself.
To allow using the entire command handling as a single task
(for simplified queueing), we can change the implementation to
always create a single task. If multiple subtasks need to be
chained together, we can do that by wrapping the method calls.
In case a task is asynchronous, we can also use Futures to
chain them together.
Overall, this is just a refactoring and changes no logic.
Issue: androidx/media#85
PiperOrigin-RevId: 462085724
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
Otherwise, invalid ColorInfo instances generated using faulty
MediaFormat#getInteger values could cause exceptions.
Confirmed that b/239435670 reproduces without this CL, and does not reproduce
with this CL.
PiperOrigin-RevId: 461862191
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
Some commands may be asynchronous and subsequent commands need to
wait for them to complete before running. This change updates the
queue to use (and listen to) Futures instead of calling Runnables
directly. The commands are currently still added as Runanbles
though, so this change is a no-op.
Also moves the permission check in MediaSessionImpl to before
queueing the command because the permission should be check at
the time of calling the method.
When executing the comamnds in the queue, we need to be careful
to avoid recursion in the same thread (which happens when both
the Future is immediate and running on the correct thread already).
To avoid recursion, we detect this case and loop the commands
instead.
Issue: androidx/media#85
PiperOrigin-RevId: 461827264
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
This may happen when a containers' color transfer incorrectly does not match
the video's color transfer.
An example of a file with such a mismatch is the current Transformer demo HDR10
sample file.
Manually tested by confirming that no errors are emitted for SDR and HLG sample
files, and that errors are emitted for our incorrect HDR10 sample file.
PiperOrigin-RevId: 461583532
After this change the current tracks are sent to the controller as part of
`PlayerInfo` and call `Listener.onTracksChanged()` in case of a change in tracks.
PiperOrigin-RevId: 461578695
- Update profile selection logic to pick an HDR-compatible profile when doing HDR editing on H.264/AVC videos.
- Handle doing the capabilities check for all MIME types that support HDR (not just H.265/HEVC).
- Fix a bug where we would pass an HDR input color format to the encoder when using tone-mapping.
- Tweak how `EncoderWrapper` works so decisions at made at construction time.
Manually tested cases:
- Transformation of an SDR video.
- Transformation of an HDR video to AVC (which triggers fallback/tone-mapping on a device that doesn't support HDR editing for AVC).
- Transformation of an HDR video with HDR editing.
PiperOrigin-RevId: 461572973
This change is done to keep the frame data unchanged.
RtpH263Reader changes the header data in input, so to send the same
RTP packet across multiple tests, each test copies the frame data
into a new packet and sends that to the reader.
Earlier, the consume method of RtpH263Reader was changing the bytes of the
input bitstream during header parse. This commit copies the input into
local context and changes the local variable as per the specifications
thus keeping the input constant.
Also remove VideoEncoderSettings.colorProfile as there are no
concrete use cases for customizing this and it clashes with picking
the color format automatically based on SDR vs. HDR.
PiperOrigin-RevId: 460746987
The call doesn't currently reset the already loaded suppliers and
factories. Also fix the supplier loading code to use a local copy
of the current dataSourceFactory to avoid leaking an updated
instance to a later invocation.
Issue: androidx/media#116
#minor-release
PiperOrigin-RevId: 460721541
We currently start a simple Thread to release AudioTracks
asynchronously. If many AudioTracks are released at the same
time, this may lead to OOM situations because we attempt to
create multiple new threads.
This can be improved by using a shared SingleThreadExecutor.
In the simple case of one simmultaneous release, it's exactly
the same behavior as before: create a thread and release it
as soon as it's done. For multiple simultanous releases we
get the advantage of sharing a single thread to avoid creating
more than one at the same time.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 460698942
Leaving the media item that has been passed in unchanged, ensures that the
media item in the timeline is equal to the media item that the user has
passed into the player. The value of the tag is the uid of the window,
meaning this is redundant information.
#minor-release
PiperOrigin-RevId: 460542246
`HevcConfig.parse` misreads reserved bit to determine NAL unit type. This is currently meant to be always set to 0, but could be given some kind of meaning in a future revision.
Issue: google/ExoPlayer#10366
PiperOrigin-RevId: 460487613
Some calls to handleBuffer return false while a previous
flush is still handled in the background.
Fix this by either asserting the method returns true if
we don't expect any delay, or calling it repeatedly until
it returns true (within a timeout).
PiperOrigin-RevId: 460474419
I don't think it's useful to keep these in numerical order, it makes
more sense to keep them grouped into a 'logical' ordering.
#minor-release
PiperOrigin-RevId: 460453464
This extension is needed for editing HDR input with OpenGL, as the
ExternalTextureProcessor samples raw YUV values from the
external texture for HDR and converts them to RGB itself rather than
relying on the OpenGL driver to do this automatically as for SDR.
PiperOrigin-RevId: 460424154
The media item needs to be assigned to `Window.mediaItem` in `CastTimeline.setWindow`. For this the `MediaItem` needs to be available in the timeline.
When a `MediaItem` is passed to the `set/addMediaItems` method, we can't yet know the Cast `MediaQueueItem.itemId` that is generated on the device and arrives with an async update of the `RemoteMediaClient` state. Hence in the `CastTimelineTracker`, we need to store the `MediaItem` by Casts's `MediaItem.contentId`. When we then receive the updated queue, we look the media item up by the content ID to augment the `ItemData` that is available in the `CastTimeline`.
Issue: androidx/media#25
Issue: google/ExoPlayer#8212
#minor-release
PiperOrigin-RevId: 460325235
This saves an intermediate texture copy step for use-cases
where matrix transformations are the first or only effects
in the chain.
PiperOrigin-RevId: 460239403
- Added setter to disable this feature.
- Added accompanying tests.
- Plan to run tests on the same set of settings on H265.
PiperOrigin-RevId: 460238673
We wait until a previous AudioTrack has been released before
creating a new one. This is currently done with a thread
block operation, which may cause ANRs in the extreme case
when someone attempts to release the player while this is
still blocked.
The problem can be avoided by just returning false from
DefaultAudioSink.handleBuffer to try again until the previous
AudioTrack is released.
Reproduction steps to force the issue:
1. Add Thread.sleep(10000); to the AudioTrack release thread.
2. Add this to the demo app:
private int positionMs = 0;
Handler handler = new Handler();
handler.post(new Runnable() {
@Override
public void run() {
player.seekTo(positionMs++);
if (positionMs == 10) {
player.release();
} else {
handler.postDelayed(this, 1000);
}
}
3. Observe Player release timeout exception.
These steps can't be easily captured in a unit test as we can't
artifically delay the AudioTrack release from the test.
Issue: google/ExoPlayer#10057
PiperOrigin-RevId: 459468912
The SDR constant also specified a color space and range, in addition to
C.COLOR_TRANSFER_SDR. However, it turns out that SDR videos may use different color
space and range values, so following prior ExoPlayer conventions to have `null`
mean "generic SDR" is preferable here.
PiperOrigin-RevId: 459296746
This is to be consistent with what cast `QueueMediaItem` is doing. If a contentId is
not available the contentUrl is used as the ID.
#minor-release
PiperOrigin-RevId: 459133323
Update VP8 header to check if the S bit is set.
Variable fragmentedSampleSizeBytes is initialised with -1, and reader
is directly adding fragmentSize to this variable.
Updated it to check if the size is unset.
Bug: 238153477
Test: manual
Change-Id: I9d5735422a4a0eeb2967af93809b879b434e3c57
If the input is HDR (HLG), check encoder capabilities for HDR support
and request tone-mapping to SDR during decoder configuration otherwise.
Capabilities are only checked for API 31 and above, as HDR editing is
not supported before.
As the encoder capabilities check needs to happen before selecting the
encoder to use (as this may depend on the resolution output by the
effects chain), the EncoderWrapper checks all candidate encoders
for the MIME type for HDR capabilities and only requests fallback to
SDR if none of them support it.
When the actual encoder is selected, the wrapper checks that it matches
one of the encoders is checked capabilities for.
PiperOrigin-RevId: 458511599
Configure the GL shaders and encoder to take in HDR metadata.
This mostly just consists of passing the Format.colorInfo through
the VideoTranscodingSamplePipeline down to the encoder, rather than passing
the PQ-ness down to the GL step.
Due to b/237674316, this will remove HDR10+ support temporarily to introduce
support for HLG10.
Manually tested to confirm that HLG10 operations that don't affect color display
correctly after this CL with "HDR editing" in the demo checked, and continue to display incorrectly (as before this CL) without the option unchecked.
PiperOrigin-RevId: 458490810
ProgressiveMediaPeriod loads all available tracks into SampleStreams
(because it needs to read the data anyway and it allows easy activation
of tracks without reloading). However, the SampleStreams for disabled
tracks are not read and no one if waiting for them.
The buffered position is used for user-visible state (e.g. in the UI)
and to check how much data is already buffered to decide when to stop
buffering (using LoadControl). Both values benefit from only
using the actually enabled tracks to better reflect what is available
for playback at the moment.
Issue:Issue: google/ExoPlayer#10361
PiperOrigin-RevId: 458475038
We used "ALL_COOECS" previously, and it is not necessary because "ALL_CODECS"
additionally the codecs that support tunneling/secure decoding, which there
is no use case in Transformer.
PiperOrigin-RevId: 458470278
Although MediaCodec claims supporting float frame rate, encoder init failed on
API21 Nexus 5. Since it's just a performance hint to the codec, it's OK to
generalize it to other API versions.
PiperOrigin-RevId: 458434650
- Improve variable naming to include time units for clarity
- Fix existing timestamp calculations to respect time units as well as track tempo (default values for now)
- Ensure the synthesizer produces PCM for the correct amount of time (including gaps between commands).
PiperOrigin-RevId: 458428243
As per MP4 spec, bitrates in esds boxes can be a 32 bit number which doesn't fits in Java int type, so now reading it as a long value. Our class for holding media format, only allows bitrates value to be an int as we don't expect the bitrates to be greater than or equal to 2^31. So we're limiting the values for bitrates to Integer.MAX_VALUE.
#minor-release
PiperOrigin-RevId: 458423162
The GlEffectsFrameProcessor that will be part of the effects module
uses the DebugViewProvider. So it does not make sense for it
to be an inner interface of Transformer.
PiperOrigin-RevId: 458014932
The FinalMatrixTransformationProcessorWrapper ensures that the
surface is only replaced when it is not being rendered to and vice
versa.
PiperOrigin-RevId: 458007639
The outputHeight in the TransformationRequest is the height of
the frame as it would be displayed (i.e., after applying any
rotation specified in the format). So pass-through should only
be used if the requested outputHeight matches the input
format's height after applying the rotation.
PiperOrigin-RevId: 457934867
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
NoUidTimeline still exists as a private detail of TestUtil, but it no
longer extends ForwardingTimeline because the interactions are quite
hard to reason about.
#minor-release
PiperOrigin-RevId: 457703593
1. The offloadSchedulingEnabled value doesn't need to be in
PlaybackInfo because it's never updated in EPII.
2. The sleepingForOffload value in EPII wasn't updated explicitly
(just via the return value of a method). It was also only
meant to be enabled while the player is actively playing, but
confusingly triggered from a path where the player may
theoretically be buffering as well.
3. The offload sleeping (=not scheduling doSomeWork) was interwoven
into the actual scheduling code making it slightly hard to follow.
This can be improved slightly by keeping the offload sleeping
decision and the scheduling separate.
PiperOrigin-RevId: 457427293
This will be useful for downgrading to a lower resolution during
a slow preview and for processing slide-shows once sequential
multi-asset editing is supported.
PiperOrigin-RevId: 457017255
- Corrected trackEventBytes traversal in TrackChunk where the array position marker was not incremented properly, leading to duplicate sample output.
- Amended TrackEvent "Meta Event" parsing to account for the length of variable length bytes.
- Fixed a bug with TrackEvent message parsing where message data was parsed incorrectly due to miscalculated length.
PiperOrigin-RevId: 456967968
videoEncoderFormatUnsupported_completesWithError() has recently
been flaky on API 31 emulators on presubmit because a different
exception than the expected exception is thrown.
This disables it on those emulators to reduce testing noise
until the underlying problem is investigated and resolved.
PiperOrigin-RevId: 456765512
This change is just renaming. There is no functional change intended.
The FrameProcessor interface will be created in a follow-up.
PiperOrigin-RevId: 456741628
After this change GlEffects can use any GlTextureProcessor not just
SingleFrameGlTextureProcessor.
MediaPipeProcessor now implements GlTextureProcessor directly which
allows it to reuse MediaPipe's output texture for its output texture
and avoids an extra copy shader step.
PiperOrigin-RevId: 456530718
After this change, FrameProcessorChain chains any GlTextureProcessors
instead of only SingleFrameGlTextureProcessors.
The GlTextureProcessors are chained in a bidirectional manner using
ChainingGlTextureProcessorListener to feed input and output related
events forward and release events backwards.
PiperOrigin-RevId: 456478414
The offload sleeping stops as soon as a new DO_SOME_WORK message
is handled (because this indicates an expected change in rendering
and we want to stop sleeping until we know it's safe to do so).
Every exit path from doSomeWork needs to clear other pending
DO_SOME_WORK messages as these requests have already been handled by
the current method invocation. This currently doesn't happen from the
offload sleeping return path and a previously queued DO_SOME_WORK
message can immediately wake up the rendering loop again.
Fix this by moving the message removal to the beginning of the
doSomeWork method (as it prevents forgetting it in one of the
exit paths later).
PiperOrigin-RevId: 456259715
In follow-ups the FrameProcessorChain will set an instance of this
listener for each GlTextureProcessor to chain it with its previous
and next GlTextureProcesssor.
PiperOrigin-RevId: 455628942
The API 32 SDK has incorrect versioning metadata for Spatializer. It
reports the whole class has only been present since API 33 (which is
surely impossible given it's present in the API 32 SDK):
https://issuetracker.google.com/234009300
The metadata seems to be correct in the API 33 SDK, so this baseline
will no longer be needed when we bump to `compileSdkVersion = 33`.
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
(cherry picked from commit 61ab75b8b8)
Fixing lint errors in the string.xml files makes no sense because these are
overridden with the next automated string import. Adding a lint-baseline.xml
instead for the ui module.
See https://issuetracker.google.com/208178382
#minor-release
PiperOrigin-RevId: 455354304
The wrapper
* catches exceptions for each task and notifies the
listener (this will be used more in follow-ups when processFrame
is split into lots of listeners and callbacks),
* removes finished tasks from the queue and signals any exceptions
that occurred to the listener each time a new task is executed.
PiperOrigin-RevId: 455345184
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
PiperOrigin-RevId: 455115567
(cherry picked from commit 21d4e85817)
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
(cherry picked from commit b475f1f2da)
This code path is now completely redundant as the same effect can be
achieved by using player.setMediaItem.
#minor-release
PiperOrigin-RevId: 455115567
This change adds a SurfaceProvider interface which is necessary to
allow for texture processors whose output size becomes available
asynchronously in follow-ups.
VTSP's implementation of this interface wraps the encoder and provides
its input surface together with the output frame width, height, and
orientation as used for encoder configuration.
The FrameProcessorChain converts the output frames to the provided
orientation and resolution using a ScaleToFitTransformation and
Presentation replacing EncoderCompatibilityTransformation.
PiperOrigin-RevId: 455112598
These calls were not implemented so far as they require a mix of
initial prepareFrom/playFrom calls and addQueueItem. We can also
support clients without queue handling to set single MediaItems.
To make the calls consistent and predictable in the session,
we need to ensure that none of the play/pause/addQueueItem/
removeQueueItem/prepare/playFromXYZ/prepareFromXYZ are called
before the controller is prepared and has media.
#minor-release
PiperOrigin-RevId: 455110246
- Fixed MidiExtractor state issues which caused seeking to behave unexpectedly. Ensures the extractor is now always in the file loading state after returning RESULT_END_OF_INPUT.
- Fixed an infinite loop in MidiExtractor caused by the file data array having an initial size of 0. The extractor attempted to increase the capacity of the array by using this size of 0 in it's calculations.
PiperOrigin-RevId: 455107511
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
(cherry picked from commit e8bcdf437e)
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
(cherry picked from commit 222faa96d0)
The default constructor is only allowed to be called on
API < 32 and the test should use the defined UNSET constant
to be API independent.
#minor-release
PiperOrigin-RevId: 454568893
The native GL errors are in an arbitrary order according to
https://www.khronos.org/registry/OpenGL-Refpages/es2.0/xhtml/glGetError.xml
This means any of them could contain the most useful message
so it's better to use all for the GlException's message rather than
picking the last message and logging all others.
PiperOrigin-RevId: 454130460
`codecDrainAction` is set to `DRAIN_ACTION_NONE` in 3 places in
`MediaCodecRenderer`:
* The constructor (so there's no prior state to worry about)
* `updateDrmSessionV23()`: Where `mediaCrypto` is reconfigured based
on `sourceDrmSession` and `codecDrmSession` is also updated to
`sourceDrmSession`.
* `resetCodecStateForFlush()`: Where (before this change) the action
is unconditionally set back to `DRAIN_ACTION_NONE` and so any
required updated implied by
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` is not done.
This change ensures that `flushOrReleaseCodec()` handles
`DRAIN_ACTION_FLUSH_AND_UPDATE_DRM_SESSION` before calling .
This probably also resolves Issue: google/ExoPlayer#10274
#minor-release
PiperOrigin-RevId: 454114428
Based on
https://developer.android.com/reference/android/media/MediaCodec#using-an-output-surface,
frame dropping behaviour depends on the target SDK version.
After this change transformer will only use
MediaFormat#KEY_ALLOW_FRAME_DROP if both the target and system SDK
version are at least 29 and default to its pre 29 behaviour where each
decoder output frame must be processed before a new one is rendered
to prevent frame dropping otherwise.
Also remove deprecated Transformer.Builder constructor without a
context and the context setter.
PiperOrigin-RevId: 453971097
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
(cherry picked from commit e2f0fd7673)
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
(cherry picked from commit 9221eeb2d8)
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
(cherry picked from commit 8b592fc77a)
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
(cherry picked from commit 5333c67d08)
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
(cherry picked from commit d506c709c9)
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
(cherry picked from commit 8697338233)
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
(cherry picked from commit bd126ec5c5)
The track selector will select multi-channel formats when those can be
spatialized, otherwise the selector will prefer stereo/mono audio
tracks. When the device supports audio spatialization (Android 12L+),
the DefaultTrackSelector will monitor for changes in the platform
Spatializer and trigger a new track selection upon a
Spatializer change event.
Devices with a `television` UI mode are excluded from audio channel
count constraints.
#minor-release
PiperOrigin-RevId: 453957269
This change fixes a bug where the player is frozen with HLS chunkless
preparation because the audio stream wrappers are not marked as master
timestamp sources before preparation.
#minor-release
PiperOrigin-RevId: 453941815
The service handles three different types of `Intents`. Custom command and media
command Intents created by the library and media button event Intents from other
sources.
Media commands from the library as well as from external sources have the action
set to `android.intent.action.MEDIA_BUTTON`. If the data URI is set and can be
used to identify a session then it is a library Intent. If the Intent is coming
from an external KeyEvent, the service implementation is asked which session to use
by calling `onGetSession(controllerInfo)` with the controller info being an
anonymous legacy controller info.
Intents representing a custom command are always coming from the library and hence
always have a data URI.
Issue: androidx/media#82
PiperOrigin-RevId: 453932972
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
Use Collections.synchronizedSet() instead of creating a set from a
ConcurrentHashMap because ConcurrentHashMap has a bug in APIs 21/22
that can result in lost updates.
PiperOrigin-RevId: 453696565
This removes the prior restriction of needing to remember not to crop and set aspect ratio in the same Presentation.Builder, and makes each class a bit more targeted.
This is partially made feasible by the past work to merge consecutive
MatrixTransformations into a single MatrixTransformationFrameProcessor, which
ensures that there's no loss in quality between successive MatrixTransformations.
PiperOrigin-RevId: 453660582
With HLS chunkless preparation, audio formats may have no value
for channel count. In this case, the DefaultAudioSink will either query
the platform for a supported channel count (API 29+) or assume a max
channel count based on the encoding spec in order to decide whether the
audio format can be played with audio passthrough.
Issue: google/ExoPlayer#10204
#minor-release
PiperOrigin-RevId: 453644548
SingleFrameGlTextureProcessor is now an abstract class containing a
default implementation of the more flexible GlTextureProcessor interface
while still exposing the same simple abstract methods for single frame
processing it previously did.
FrameProcessorChain and GlEffect will be changed to use
GlTextureProcessor in follow-ups.
PiperOrigin-RevId: 453633000
These legacy callbacks are currently forwarded to onSetMediaUri which
will be removed in the future.
Also make sure to only call player.prepare/play after the items have
been set.
The calls to onAddQueueItem are also forwarded to onAddMediaItems to
actually allow a session to resolve these items to playable media, which
wasn't possible so far.
PiperOrigin-RevId: 453625204
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
(cherry picked from commit 814e43dbb9)
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
(cherry picked from commit 247c2d845d)
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
(cherry picked from commit 39674bec78)
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
This change makes MediaSessionPermissionTest.removeMediaItems()
non-flaky. This is a quick fix though it'd be good to refactor this
test file.
PiperOrigin-RevId: 453162764
Implementations of this interface will be able to drop or add frames,
change timestamps, accept multiple input frames before producing
output, and process frames on their own background thread.
A default implementation of this interface will be added to SingleFrameGlTextureProcessor in a follow-up.
PiperOrigin-RevId: 453159835
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
This internal listener avoids wrapping the TransformationExceptions
in PlaybackExceptions that are handled via the Player.Listener and
is also used for FrameProcessingExceptions which already avoided
the PlaybackException layer previously.
This listener will also be useful in follow-ups for encoder-related
TransformationExceptions that are thrown in the SurfaceProvider that
will be called on the GL thread.
PiperOrigin-RevId: 452074575
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
(cherry picked from commit 1282175808)
This reinstates the permissive behaviour removed by
fe7e5b8181
Test file created by opening bear.opus in a hex editor and naively
duplicating the two header packets, starting at (and including) the
first `OggS` in the file and ending just before the third `OggS`.
#minor-release
Issue: google/ExoPlayer#10038
PiperOrigin-RevId: 452015662
Once the more advanced GlTextureProcessor interface exists,
it will be possible to change the output size of a GlTextureProcessor
between frames. To keep the re-configuration based on the frame sizes
minimal, things indepedent of the frame size, such as the GlProgram,
can be initialized in the constructor.
PiperOrigin-RevId: 451997584
This provides an (unstable) API for apps to broadcast session extras
Bundle to all connected controllers and set the extras in the legacy
session.
Similar to the custom layout, the extras Bundle is not part of the
Media3 session state. This means that when a Media3 controller
connects to the session after the broadcast, the extras needs to be
sent to that controller in `MediaSession.Callback.onPostConnect(MediaSession session, ControllerInfo controller)`.
PiperOrigin-RevId: 451871731
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
The MediaItemFiller is not flexible enough for most realworld usages
because:
- it doesn't allow asynchronous resolution of MediaItems (e.g. to
look up URIs from a database)
- it doesn't allow to batch updates for multiple items or do more
advanced customizations (e.g. expanding a mediaId representing
a playlist to multiple items).
Both issues can be solved by passing in a list of items and
returning a ListenableFuture. The callback itself can also move
into MediaSession.Callback for consistency with the other
callbacks.
PiperOrigin-RevId: 451857319
The MockPlayer currently:
- uses separate fields for single mediaItem vs multiple mediaItems
- replaces all items on addMediaItem operations
- does nothing on remove/move operations.
Fix all of this by using a single field that replicates the player
operations directly.
Some tests also need to be updated to make them more realistic
(for example only removing items from a playlist that have
previously been added).
PiperOrigin-RevId: 451857271
In some cases it's helpful to have access to the session
(e.g. to get the PlayerWrapper) from within the PostSessionTask
implementations. This change forwards the existing sessionImpl
instance to all these callbacks.
PiperOrigin-RevId: 451857191
These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).
PiperOrigin-RevId: 451857093
ExoPlayer applies a large time offset to buffers so that, if the input has negative timestamps, generally buffers seen by the decoders should have positive timestamps. Modify how the offset is handled in `Transformer` so that decoders and encoders generally see positive timestamps, by leaving the offset on samples when reading them in the base renderer (remove the code that removed the offset), and then removing the offset when muxing. Also update the frame processor chain and slow motion flattening code to retain the existing behavior after this change (these both need original media presentation timestamps)
Tested via existing end-to-end tests and manually verified that the overlay frame processor shows the expected original media timestamps.
Aside: we don't need the same logic as ExoPlayer to track stream offsets across the decoder yet, because we don't try to handle stream changes during playback in single asset editing. (There is an edge case of multi-period DASH that may not work but I doubt anyone will use that as input to `Transformer` before we change the code to handle multi-asset properly.) In future we should try to refactor interaction with the decoder to use the same code for Transformer and ExoPlayer.
PiperOrigin-RevId: 451846055
Most devices won't support 8k decoding, so they'll skip this test entirely.
As the video is quite short, this test shouldn't be any longer than the nearby,
long-running 4k60 test.
PiperOrigin-RevId: 451423368
Unconditionally sleep for offload, if the audio buffer is full.
Previously ExoPlayer would not sleep if the expected wake-up was
in 2s. This was to prevent underrun if the wake-up was delayed.
Experiments have shown that the wakup audio buffer is far more
than 2s (around 1min). Additionally,
the metric was incorrect because it measured both,
AudioTrack + DSP.
Finally, this metric was erroneous after a gapless transition,
when the head position would reset to 0 and thus the computed
delay until next wakeup was too large.
PiperOrigin-RevId: 451383701
SSIM calculation requires the input and output dimensions to be identical.
For devices that can't encode the input dimensions, skip SSIM calculations and
log the cause. Only apply this on tests where the encoder may not support the
input file dimensions.
PiperOrigin-RevId: 451364904
Decode-only video frames (needed when the frame at / first frame after the
clipping start is not a key frame) need to be decoded but not passed to
the frame processor chain or encoder.
The clipping start offset needs to be removed from the frame timestamps
in the passthrough and video pipelines.
There are no changes needed for this in the audio pipeline, as it doesn't
use the input timestamps -- it uses its own timestamps derived from the
buffer sizes instead.
Also add demo option to try this out.
#minor-release
PiperOrigin-RevId: 451353609
There's no need to manually construct a 'default'
DefaultDataSource.Factory instance, we can just pass the `Context` to
`DefaultMediaSourceFactory` and let it construct the
`DefaultDataSource.Factory` internally.
PiperOrigin-RevId: 451155747
