The placeholder surface is either EGL_NO_SURFACE or a 1x1 pbuffer
depending on whether the device supports EGL_KHR_surfaceless_context.
PiperOrigin-RevId: 438541846
Since the output textures and surfaces are managed by the
FrameProcessorChain, clearing them there makes sense.
This is also less error-prone as it might not be obvious to
someone implementing a GlFrameProcessor that they need to
glClear. (Clearing twice won't cause any problems.)
PiperOrigin-RevId: 438532247
This requires an additional nanos to micros conversion because
the SurfaceTexture uses nanos. But as the timestamps from the
MediaCodec decoder (propagated in DefaultCodec#releaseOutputBuffer) are
in microseconds no precision is lost here.
Also add test that checks output video duration.
PiperOrigin-RevId: 438010490
MAXIMUM_AVERAGE_PIXEL_ABSOLUTE_DIFFERENCE was copied from a test
class, but BitmapTestUtil isn't a test. So the javadoc needs
rewording to reflect that.
PiperOrigin-RevId: 438001833
The problem is not the IntDef array, it's the fact the lint tool
is unable to correctly infer the annotations on the lambda parameters
without them being explicitly annotated. It seems explicitly annotating
is better than suppressing all IntDef warnings in the whole method.
PiperOrigin-RevId: 437969271
From Android T onwards `MediaCodec` supports requesting tone-mapping down to
SDR. Add an option to request this behavior and document that it isn't
supported before T. Also add an option in the demo app to try it out.
Tested manually on a prerelease build.
PiperOrigin-RevId: 437765325
The thread name is used to verify the thread in both createOpenGlObjectsAndInitializeFrameProcessors() and processFrame().
Also remove glThread field that was only used for this verification.
PiperOrigin-RevId: 437730804
Since the output size can be overridden, the viewport should be
ouputWidth/Height and NOT the ExternalCopyFrameProcessor's output size
which matches the input size.
PiperOrigin-RevId: 437256635
OutlineColour should be treated as the background color if BorderStyle=3. Since currently BorderStyle is ignored, we can always treat OutlineColor as the background color.
* The AdvancedFrameProcessor calls use() in updateProgramAndDraw().
* The AdvancedFrameProcessor has the same input and output dimensions.
PiperOrigin-RevId: 437231350
On some devices, decoding gets stuck when the number of frames pending at the
`SurfaceTexture` is too high. We added a workaround that only allows one frame
to be pending at a time. That fixed the issue, however, based on on-device
testing it seems that it's safe to queue more than one frame.
Add a method that returns a safe estimate of the number of frames that can be
pending at a time, and use this to limit the number of frames that can be
released from the decoder but not processed by the frame processor chain.
PiperOrigin-RevId: 437057075
Configuring the frame sizes between frame processors is now the
FrameProcessorChain's rather than the caller's responsibility.
The caller can getOutputSize() and override it for encoder fallback
in configure().
PiperOrigin-RevId: 437048436
The factory method is replaced by a public constructor and
configure() method which configures the input/output surfaces
and handles the OpenGL setup.
This is a prerequisite for removing the responsibility of the
caller to configureSizes() before creating the chain in a follow-up.
PiperOrigin-RevId: 437028882
This allows us to bypass many device-specific issues, that only occur when
decoding directly to an encoder surface, without OpenGL. This also allows us
to maintain fewer code branches, which require additional testing to verify
correctness.
PiperOrigin-RevId: 437003138
Allow apps to modify how frames are presented, via modifying resolution.
A follow-up CL will provide aspect ratio, cropping, etc.
PiperOrigin-RevId: 436963312
* These grouping parentheses are unnecessary; it is unlikely the code will be misinterpreted without them
(see http://go/bugpattern/UnnecessaryParentheses) (11 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 436726763
SEF is similar to frame editing, where the input and output videos are
not intended to match, so SSIM will not provide a reliable value. To
check SSIM correctly in future, we would need to provide
golden/expected video files to compare output against.
PiperOrigin-RevId: 436707240
The FrameProcessorChain manages a List<GlFrameProcessor>.
FrameProcessorChainDataProcessingTest now tests chaining ScaleToFit-
and AdvancedFrameProcessors.
PiperOrigin-RevId: 436468037
This currently causes the test to fail on Pixel 6 Pro running a recent S build
SQ1D.220205.004.
There is no need to test audio transcoding while we are measuring video
quality.
PiperOrigin-RevId: 435635314
ExternalCopyFrameProcessor's output dimensions match the input
size not the output size. So the intermediate texture size
should match the input size.
Also rename configureOutputDimensions to configureOutputSize.
PiperOrigin-RevId: 435058789
More info: go/lsc-assertthrows and go/assertthrows
NOTE: if the source of truth for this code is _NOT_ `//third_party/`, please ask for this CL to be reverted.
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:434925976:BASE:434869111:1647399186064:de338189
PiperOrigin-RevId: 435047509
Some infra thinks the if does not protect against API incompatibilities
(example: Android's soong build system). AndroidStudio 2021.3.1 also
signals a warning.
#minor-release
PiperOrigin-RevId: 435027073
Use android.util.Size, whose naming is much easier to understand than Pair<Integer, Integer>, in both FrameProcessor and EncoderUtil.
PiperOrigin-RevId: 434813986
* Move auto-adjustments for transformation matrices from the
VideoTranscodingSamplePipeline constructor to the new
ScaleToFitFrameProcessor.
* Add GlFrameProcessor#getOutputDimensions() to allow for GlFrameProcessors with
different input and output dimensions. This is a prerequisite for
Presentation.
* Tested with unit tests (and manually just in case).
* A follow up CL will implement change the FrameProcessor input to be scale and
rotate values as requested by the user. This was kept out of this CL to
reduce CL review size. Presentation will also be implemented in a follow up
CL.
PiperOrigin-RevId: 434774854
As pointed out in a previous review, createFallbackTransformationRequest
can be a bit confusing to parse.
Added javadocs and renamed parameters appropriately, to make it slightly
more easy to understand.
PiperOrigin-RevId: 434733313
*** Original commit ***
Rollback of 20282151b5
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClick...
***
PiperOrigin-RevId: 434502423
*** Original commit ***
Don't call MediaDrm.setLogSessionId in FrameworkMediaDrm
This method throws an UnsupportedOperationException on some Android 12
devices.
***
PiperOrigin-RevId: 433708582
The variable marks the coordinates used to sample from a texture, so hopefully
this makes the naming a bit more descriptive.
This renames vTexCoords and aTexCoords. No functional changes intended.
PiperOrigin-RevId: 433499934
This fixes an exception thrown when parceling becasue the type can not be found
(expects the AdsPlaybackState to be Serializable). Transforming the map and the
ad playback states to a Bundle fixes the problem.
#minor-release
PiperOrigin-RevId: 433491993
When the start position of a MediaPeriodInfo is equal or higher than the duration,
we set the start position to `duration - 1` to end on the last frame. With server
side inserted ad streams, this has the effect that we actually need to seek back to
the last content frame after a post-roll.
This is desirable when actually ending on that frame but produces a BUFFERING event
when transitioning from an SSAI stream with a post-roll to the next media item in
the playlist. This change sets the start position to the duration when we are
clipping the last content period of an SSAI stream that is played in a playlist.
PiperOrigin-RevId: 433445680
If an OpenGL call blocks because the encoder's input surface is full,
this will now block the background thread while the main thread can
continue querying encoder output and free up encoder capacity until
it accepts more input unblocking the background thread.
PiperOrigin-RevId: 433283287
*** Original commit ***
Fix PlayerView touch handling
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClickListener when
useController is false.
3. Delivery of events to a registered OnLongClickListener
in all configurations.
4. Incorrectly treating a sequence of touch events that
exit the bounds of the vi...
***
PiperOrigin-RevId: 433262414
With the new version, we try the following before fixing resolution:
- Fix size alignment
- Try 3/4 the width and height
- Try 2/3 the width and height
- Try 1/2 the width and height
Also: align the resolution ends in 1 or 9 to 0.
PiperOrigin-RevId: 433206358
Overriding onTouchEvent was causing multiple issues, and
appears to be unnecessary. Removing the override fixes:
1. StyledPlayerView accessibility issue where "hide player
controls" actually toggled play/pause.
2. Delivery of events to a registered OnClickListener when
useController is false.
3. Delivery of events to a registered OnLongClickListener
in all configurations.
4. Incorrectly treating a sequence of touch events that
exit the bounds of the view before ACTION_UP as a click,
both for delivery to OnClickListener and for toggling
the controls.
Note: After this change, control visibility will not be
toggled if the application developer explicitly sets the
view to be non-clickable. I think that's probably working
as intended though. It seems correct that a non-clickable
view would not respond to clicks.
Issue: google/ExoPlayer#8627
Issue: google/ExoPlayer#9605
Issue: google/ExoPlayer#9861
PiperOrigin-RevId: 433016626
This change rewrites the UI module's track selection
components to depend on the Player API, allowing us to
finally remove the UI module's dependency on ExoPlayer
as a concrete player implementation.
PiperOrigin-RevId: 432989318
Previously, we've used getSupportedHeights/Widths() to find the supported
resolution. However, the height/width can be over-reported when using these
APIs. For example, getSupportedWidths and getSupportedHeights can both return
3840, but the supported height when using 3840 as width is only 2160.
PiperOrigin-RevId: 432926192
This makes the reading period advance early as expected at the end of an ad
period. Before this change the reading position of the metadata renderer
prevented advancing the period until metadata arrived after the start position of
the following period. Only then the reading position of the metadata renderer
is updated and beyond the start position of the following period which is a
condition to advance the reading period.
Because transitioning to the next period is a virtual transition and the
SharedMediaPeriod keeps reading from the same underlying sample streams, the
metadata renderer can safely be ignored for this check.
#minor-release
PiperOrigin-RevId: 432646037
We will be migrating our track selection UI components to be
based on TracksInfo. We need DownloadHelper to expose TracksInfo
to make it compatible with such components.
PiperOrigin-RevId: 432474487
addTrackSelectionForSingleRenderer takes a list of legacy overrides,
which are then set on the supplied parameters one at a time to run
track selection. This allows multiple overrides for a single track
type to be applied in the download use case, despite it not being
possible to place such overrides directly into a single parameters.
For new style overrides, multiple overrides for the same track type
can be placed directly into a single parameters. Therefore we'll be
able to replace use of addTrackSelectionForSingleRenderer with use
of addTrackSelection, which is a much cleaner API. For this to work,
we need to make DownloadHelper apply multiple overrides in this case.
PiperOrigin-RevId: 432459834
This will allow for easier customisation of the additional tasks
performed by the test runner, such as calculating metrics like SSIM.
PiperOrigin-RevId: 432434850
These should have been removed as part of 1391b7c65d, since we no
longer officially support overriding the layout file for this class.
This class is known as StyledPlayerView in exoplayer2.
#minor-release
PiperOrigin-RevId: 432411322
This method is no longer needed since we added SubtitleConfiguration#id
in 59d98b9a4e.
Issue: google/ExoPlayer#10016
#minor-release
PiperOrigin-RevId: 432169262
DownloadHelper is in the ExoPlayer module, so there's no reason
why it can't use ExoPlayer specific track selections. That said,
we want our UI components to operate on generic
TrackSelectionParameters, and we want such UI components to be
useful for selecting tracks for download. To keep this interop,
it's necessary to have DownloadHelper accept generic
TrackSelectionParameters, or to require application code to
convert them. The first approach seems preferable!
PiperOrigin-RevId: 432158846
This constructor always does the wrong thing for non-adaptive groups
containing more than 1 track, because it'll incorrectly generate an
adaptive selection. Replace it with a constructor for specifying a
single track within the group instead.
PiperOrigin-RevId: 431673458
Only log GL exceptions in GlUtil if they aren't thrown. Otherwise,
it's up to the caller whether or not to log them to avoid logging them
twice.
PiperOrigin-RevId: 431657397
This test tests the same cases as the FrameEditorDataProcessingTest
as currently the main FrameEditor functionality is to apply a
transformation matrix using a TransformationFrameProcessor.
PiperOrigin-RevId: 431642066
As evidenced by the somewhat awkward logic in PlayerControlView, the
previous design wasn't very friendly to expected usage. There will be
more usage when the track selection dialog components are migrated,
which would be similarly awkward without this change.
PiperOrigin-RevId: 431407675
We use SSIM to measure the transcoding quality between. SSIM is a widely used
tool that compares the luma channel between two images, and generates a score
from 0 to 1 that indicates "how similar" the two images are.
In `SsimHelper`, we decode the two videos, extract matching frames and
calculates the mean SSIM (SSIM averaged all matching frames) for both videos.
Matching frames are referred to as "comparisonFrame" in the CL, which is
selected based on the frame number and a user-set comparison interval.
For instance, if the interval is 7, then every seventh frames are compared.
We use MediaCodec/MediaExtractor to decode the video, and use ImageReader to
extract the decoded frame.
The SSIM calculation logic is a inspired by and modified from the CTS
[MSSIMMatcher](https://cs.android.com/android/platform/superproject/+/master:cts/tests/tests/uirendering/src/android/uirendering/cts/bitmapcomparers/MSSIMComparer.java;l=1?q=mssimcom)
that has some errors and extra features we don't need (like handling RGB
images).
Adds TranscodeQualityTest to ensure high quality transcoding.
PiperOrigin-RevId: 430951206
*** Original commit ***
Rollback of 8d9c4f4774
*** Original commit ***
Rollback of 43b796b64d
*** Original commit ***
Rollback of 08c5b1cb0a
*** Original commit ***
PiperOrigin-RevId: 430905772
The AsyncronousMediaCodecAdapter should call MediaCodec.start()
on the same thread it calls MediaCodec.flush(), i.e. the playback
thread. This change removes the experimental flag that allowed
calling MediaCodec.start() from the callback thread.
The flag was flipped to true already.
PiperOrigin-RevId: 430689665
This can fix the following warning caused by commit a7aa84a:
Warning: com.google.android.exoplayer2.drm.UnsupportedDrmException.Reason:
The typedef annotation should have @Retention(RetentionPolicy.SOURCE)
Author: Tony Guo <tony.guo.peng@gmail.com>
Date: Mon Feb 28 10:56:52 2022 +0800
We need to access internal state to work around resources not being released on
old API versions. Add a reference to the bug about this and suppress the lint
warning.
#minor-release
PiperOrigin-RevId: 430190794
All (later customizable) GlFrameProcessors after the
ExternalCopyFrameProcessor receive their input from a normal OpenGL
texture not an external texture, so they won't need to worry about
the textureTransformMatrix.
PiperOrigin-RevId: 430165652
getCurrentTrackGroups and getCurrentTrackSelections are
retained for now, but moved from Player to ExoPlayer, to
ease the transition for some application code that currently
uses these methods.
PiperOrigin-RevId: 430036355
There are two major blockers to this test:
- H265 muxing is not available for API<24, so setting video mimeType to H265
will fail on those devices.
- AMR audio encoding is buggy on some device and it's not a widely used format.
The solution: use a video that is encoded with AVC/MP3, to ensure transcoding
to AVC/AAC.
PiperOrigin-RevId: 429648598
Re-enable tests that have no muxer support for timestamps going backwards.
Tests running on the B-frame sample will be added in a future commit.
#mse-bug-week
PiperOrigin-RevId: 429599177
*** Original commit ***
Rollback of 43b796b64d
*** Original commit ***
Rollback of 08c5b1cb0a
*** Original commit ***
Wire up MediaMetricsListener and add configuration to...
***
PiperOrigin-RevId: 429585773
We use the `createForCodec` method that does not take a `MediaFormat` during
transformation, the error message always includes "no configured MediaFormat",
which is false.
PiperOrigin-RevId: 429553573
isTypeSupportedOrEmpty is very specific and a little hard to
understand unless you know the one thing it's useful for. This
commit replaces it with isTypeSupported, which can be used in
conjunction with the recently added containsType method.
PiperOrigin-RevId: 429312712
The track type is derived solely from the content. It does
not depend on any runtime properties such as the player's
capabilities of user track selection. Hence it belongs in
TrackGroup rather than TrackGroupInfo.
Note that this avoids TrackSelectionOverride from having to
re-derive the track type internally.
PiperOrigin-RevId: 429303312
Calling `MediaMuxer.writeSampleData` can block indefinitely on old API versions. It is better not to call this method to fail quickly with an exception rather than getting stuck.
Based on on-device testing media muxer doesn't generally handle out of order samples before API 25. There are a small number of devices where this does succeed but it seems preferable to turn this off everywhere to keep the code simple and have consistent behavior. Once we switch to in-app muxing this limitation will no longer apply.
#mse-bug-week
PiperOrigin-RevId: 429070255
Tested:
Verified that the additional information is available through
instrumentation tests, as well as via manual testing.
#mse-bug-week
PiperOrigin-RevId: 429038695
- The resources were released twice before, which is not necessary since
the MSG_RELEASE message is already in the internal player queue.
- The demo app was failing because the stop watch was stopped in
onTransformationError after being reset.
#minor-release
#mse-bug-week
PiperOrigin-RevId: 428794426
We need TracksInfo.hasTracksOfType to determine which tabs to
display in TrackSelectionDialog.
We need TrackGroupInfo.isAdaptiveSupported to determine whether
to allow multiple selection (check boxes) or not (radio buttons).
PiperOrigin-RevId: 428793739
The GlFrameProcessor handles everything related to the GLSL program,
the FrameEditor manages the GL context and the data flow including
the input SurfaceTexture and output EGLSurface.
This will be split up further in follow-up CLs so that
GlFrameProcessors can be chained. At this CL, there are no
functional changes intended.
PiperOrigin-RevId: 428779179
This change makes sure played server side ads are skipped in a single period
timeline. It avoids creating an ad-MediaPeriodInfo for played postrolls and
creates a content info instead. It also sets the end position for content infos
that terminate the stream before the stream is actually finished. This prevents
the player from continue playing the remaining media delivered by the
MediaPeriod.
We also make sure that the discontinuity of played ads are not reported because
there is actually no discontinuity.
#minor-release
PiperOrigin-RevId: 428734387
The last used shared media period is reused after all media periods have been
released. In case the sample streams are already filled up, they need to be
reset or they download samples from the current position up to the seek
position. This causes long buffering states or load stuck exceptions.
A seek when reusing the shared period takes care for reseting the period or
internally seeks to the current position in the already available samples.
#minor-release
PiperOrigin-RevId: 428484187
We have two ways to choose the minDurationForQualityIncreaseMs value in
AdaptiveTrackSelection: use the configured value for non-live or when
enough buffered data is available, or use a fraction of the available
duration to allow switching when playing close to the live edge.
The decision point when to use which value isn't quite consistent because
we compare against availableDurationUs before making the adjustments. This
means there is range of values where no up-switching is possible despite
perfect buffering. Fix this by choosing the minimum of both values.
Issue: google/ExoPlayer#9784
#minor-release
PiperOrigin-RevId: 428474332
Ignorable ad periods are skipped to resolve the media period id with the
ad playback state of the resulting period. In case of a change in the period
position un-played ad periods are rolled forward to be played.
PiperOrigin-RevId: 428011116
This adds some missing calls to verifyApplicationThread to
ExoPlayerImpl.
Now all public methods start with this call, except listener
registrations because registration after construction on a background
thread is allowed and supported.
PiperOrigin-RevId: 428009498
All the functionality of SimpleExoPlayer has moved to ExoPlayerImpl.
Hence, ExoPlayerImpl can fulfil its own name and become an ExoPlayer
implementation. As a result, ExoPlayer.Builder can return ExoPlayerImpl
directly without using SimpleExoPlayer at all.
#minor-release
PiperOrigin-RevId: 427947028
For when a track is both encrypted and has supplemental data, the sample size will be equal to `block sample size - encryption data size`.
PiperOrigin-RevId: 427807612
We have seen devices running on API21/23 fail transcoding because of setting
encoding profile/level.
Some devices (ale-123/nexus 7) on API21 returns ENOSYS (Function not
implemented) when being configured with a profile setting. (although API21
introduced the capability of setting encoding profile)
Some devices (nexus 5) on API23 fails configuration with a specific parameter
set, despite advertising support for it.
Not setting the baseline profile has no effect on encoding, because when not
set, the encoding will pick a suitable profile to use. Since baseline is
the lowest possible profile, the auto-picked value can't be worse than
baseline.
Ref: b/218696352
PiperOrigin-RevId: 427792124
On some Android devices, the return value of
```
MediaCodecInfo.getCapabilitiesForType(mimeType).profileLevels
```
contains one entry for each encoding profile, like <profile, maxSupportedLevel>
but on some other devices, there are multiple entries for the same profile,
like <HIGH_PROFILE, LEVEL1>, <HIGH_PROFILE, LEVEL2>, <HIGH_PROFILE, LEVEL3>,
where we need to iterate through all the entries and find the max.
PiperOrigin-RevId: 427727030
And also add a test that all Player.Listener events are forwarded
to AnalyticsListener.
The AnalyticsCollector also needlessly implemented
Video/AudioRendererEventListener, which is not needed because all of
the equivalent methods are called directly and never through the
interface.
#minor-release
PiperOrigin-RevId: 427478000
When a asset contains multiple cc embedded tracks, current Cea708Decoder service
block parsing logic is discarding all the data in that frame.
For example, a manifest with 2 embedded CEA-708 close captions tracks:
<Accessibility schemeIdUri="urn:scte:dash:cc:cea-708:2015" value="1=lang:eng;2=lang:spa"/>
when the spanish track is selected (service number 2), when processing the
following CEA-708 frame:
FC9420FD2062FF0829FE8CFCFE9818FEE332FE731FFE1042FE2062FE0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000FA0000
the frame can be descomposed as:
FF0829 FE8CFC FE9818 FEE332 FE731F FE1042 FE2062 FE0000
08 (00 001000) 0 (sequence) 8 (frame size)
298CFC9818E332731F10 422062 0000
=====
29 (001 01001) 1 (service number) 9 (service block length)
8CFC9818E332731F10
42 (010 00010) 2 (service number) 2 (service block length)
2062
0000 Null block service
The current processCurrentPacket logic will discard the whole frame is discarded
because the first service number found in the frame belongs to service number 1,
which is not the one we are currently looking for.
This commit modifies the processCurrentPacket decoding logic, to take into
account all service blocks available in the frame, by iteraring over the
full frame data and skipping those service blocks we are not interesting in.
Signed-off-by: Jorge Ruesga <jorge@ruesga.com>
There are two sets of listeners in ExoPlayerImpl at the moment,
which can be merged together to use a single ListenerSet. This has
the added advantage that the events that were previously sent
through the ArraySet get additional guarantees provided by ListenerSet
(e.g. correct event ordering and onEvents triggered).
Also add missing constants for onEvents to ensure all Player.Listener
methods have an corresponding constant.
#minor-release
PiperOrigin-RevId: 427415349
This brings listener invocations closer together and removes
unnecessary methods.
Also fixes a bug where a change in track selection parameters only
queued a callback but never flushed it to actually inform the
listeners.
#minor-release
PiperOrigin-RevId: 427201691
In some cases (whose where we previously used EventListener),
AnalyticsCollector is registered as a listener to receive updates,
in other cases it is called directly.
Avoid this inconsistent handling by registering it as normal listener
and removing all callbacks that are handled by the normal listener flow.
The remaining direct usages of AnalyticsCollector calls are those
callbacks that have no equivalent in Player.Listener.
#minor-release
PiperOrigin-RevId: 427201525
With this change, MediaCodecAudioRenderer always configures MediaCodec
with max output channels set to 99 on API 32+.
#minor-release
PiperOrigin-RevId: 427192801
SimpleExoPlayer used to register a listener on ExoPlayerImpl for
the old EventListener callbacks. Now both classes are merged, this is
no longer needed and should be removed in favor of calling methods
directly.
#minor-release
PiperOrigin-RevId: 427187875
We have logic to not immediately interrupt playback when an ad group
fails to load and instead let the current content play and transition
at the point where the ad group should have been.
This logic was broken by dcbdbe5341 because of one of the conditions
used MediaPeriodId.adGroupIndex, which is always -1 for content ids.
It still worked for the last ad group because the next ad group index
was C.INDEX_UNSET.
Fix the issue and amend the test that was meant to catch this to test
the ad failures for the last ad and previous ads.
Also fix the PositionInfo reported in such a case, which was also wrong.
Issue: google/ExoPlayer#9929
#minor-release
PiperOrigin-RevId: 427143223
*** Original commit ***
Rollback of 9b8ed581d0
*** Original commit ***
Add missing imports to ExoPlayerImpl
These were missed in 3bb0210d22
#minor-release
***
***
PiperOrigin-RevId: 427131696
*** Original commit ***
Rollback of 08c5b1cb0a
*** Original commit ***
Wire up MediaMetricsListener and add configuration to disable it.
The listener will automatically forward diagnostics info to the
Android platform. ExoPlayer.Builder gets a new setter that allows
to disable this feature if required.
#...
***
PiperOrigin-RevId: 427131438
