This simplifies Loadable implementations, and also removes the
possibility of an incorrect Loadable implementation causing the
wrong Loader.Callback method being called (perviously, for the
correct method to be called, we relied on isLoadCanceled being
implemented correctly).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198871133
There is the small (but unlikely) chance that the uids clash because the
Objects have the same hash code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198855724
This adds an optional parameter to ConcatenatingMediaSource to prepare
child sources only lazily when are needed. This is helpful for long playlists
of media sources with manifests to prevent a lot of simultaneous manifest
loads.
Issue:#3972
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198855676
This allows injection of custom implementations and configuration of
DefaultHlsPlaylistTracker without modifying the HlsMediaSource interface.
Issue:#2844
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198846607
The bug here was that we'd create a VideoFrameReleaseTimeHelper
using whatever context DefaultRenderersFactory has, and it would
then hold a reference to that context via DisplayManager. A leak
could then occur if the player outlived the life of the context
used to create it (which would be strange/unusual, but not
impossible).
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198747599
As highlighted by the ref'd issue, we can end up with
memory leaks if Loadable.load implementations take a long
time to return upon cancelation. This change cuts off one
of the two problematic reference chains.
This doesn't do much about the ref'd issue, since there's
a second reference chain that's much harder to deal with:
Thread->LoadTask->loadable. But since it's easy just to
cut this one off, I figure it makes sense to do so.
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198735386
This makes the requirement that all calls are made on one thread more
explicit and also mentions this in the Getting Started guide.
Issue:#4278
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198694579
Set content length and redirect uri in a single transaction.
New: Fixed the code where DataSpec.uri is set to null in []
Automated g4 rollback of changelist 196765970.
*** Reason for rollback ***
Fixed the code where DataSpec.uri is set to null in []
*** Original change description ***
Automated g4 rollback of changelist 194932235.
*** Reason for rollback ***
This CL breaks the playability of Mango's offlined progressive videos.
*** Original change description ***
Set content length and redirect uri in a single transaction
NORELNOTES=true
NO_BUG
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198370211
When the player state is changed from an event listener callback, we may
get recursive listener notifications. These recursions can produce a wrong
order, skip or duplicate updates, and send different notifications to
different listeners.
This change serializes listener notifications by clustering all update data
in a helper data class and adding the updates to a queue which can be handled
in a loop on the outer layer of the recursion.
As playWhenReady updates also reference the current playbackInfo, we need to
redirect the listener notifcations for setPlayWhenReady to the same queue.
Issue:#4276
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198031431
Use PixelCopy API for the first SurfaceCapturer implementation. This supports
devices from API 24+.
Github: #3609.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197732711
Some module/extensions couldn't use the static test so far because all files
needed to be put on the blacklist. To ensure the test it set up for all
modules, this fixes at least one file for each of the modules.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197731449
Currently, the sample queues are lazily enabled when they are first read from.
This causes problems when the player tries to discard buffer and the
HlsSampleStreamWrapper assumes the sample queue is disabled even though it's
actually enabled but hasn't been read from.
This change moves setting the sample queue index of the sample stream back into
HlsSampleStreamWrapper. It enables the sample queues at track selection if the
queues are already built, or immediately after they have been built for
chunkless preparation.
Issue:#4241
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197415741
InstrumentationTestCase has been deprecated, and it does not offer some useful
features, such as targeting SDK version level for tests, or skipping tests if
necessary.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197141082
A new playback nonce is created for each playback of the same item. Thus we
need to inject the nonce dynamically into the data source factory.
This CL adds the DataSource which does the actual insertion into the request
URLs and a MediaSource which listens to new media periods, to request the
nonce and to configure the data source factory for this media period to use
this nonce.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197134217
This CL allows failure if a playlist load fails with a non-blacklistable
error. For example, loss of internet connection.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197006579
For TTML, if the font size is expressed in %, the font size should be relative
to the cellResolution of the document which we did not support before. This CL
adds support for handling this correctly.
Note that this still does not support font size using c unit.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196985694
SparseIntArray.get(key) defaults to zero for missing keys (the null check was
left over from when a Map was used).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196957452
Also update TrackSelectionView with nullness annotations.
Issue: #4263
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196849706
If the caption line has no text (empty line or only line break), we should not
display its background.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196823319
Due to a bug, for each TTML node, when applying its style to the encompassed
regions, it applies child nodes's styling several time for each region (the
number of time is equal to the number of region). This leads to a styling issue
if there are multiple regions in a node displayed at the same time in TTML file.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196810046
The sample size from the stsd box takes precedence over the sample size in the
stsz box.
Also remove assumption that C.INDEX_UNSET is -1 in ChunkIterator (which is a
no-op change).
Issue: #4228
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196661751
Added FlacBinarySearchSeeker, which supports seeking in a FLAC stream by searching for individual frames within the file using binary search.
Github: #1808.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196587198
Fix suppressing initial "state changed to paused" listener invocations
for new added tasks that are immediately started.
Notify listeners for loaded actions queued state if they are not started
immediately.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196542693
The app can set the player to null while messages from the player are still
in flight. This may cause NPEs.
Issue:#4238
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196504077
The lint error suppression only works locally and not for external developers
who still see the lint error and need to suppress it themselves.
This changes 'implementation' to 'compileOnly' in gradle to prevent the
dependency from being exported. Also removes the local lint suppression.
Issue:#4234
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196251407
This makes way for reusing EGLSurfaceTexture in other places, such as metadata
and frame retriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196240576
This is useful to get hold of the manifest to then obtain DRM init data in
the download flow for protected content (without having to download the
manifest again).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196168938
Open was not calling through to upstream.open. This was not problematic for
reading, because DataSourceInputStream.read would open the upstream if it's
not open already. It was however a problem for calling getUri() between
calling open and the first call to read, which would end up calling
upstream.getUri() on the not-yet-opened upstream.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195689472
Also only listen to requirements when actually necessary, else we can
put the service into the foreground when it needn't be there.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195597750
This type of flicker was visible (at least on my S8) whenever starting
the demo app process (from being properly killed) when other notifications
(e.g. completed download notification) was present.
This change passes whether the service was started as foreground through
the intent, and only applies the show-notification-on-stop hack if it
was. It's only necessary to start as foreground if your app is not already
in the foreground, so it's not necessary to do this from activity/ui
components.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195594930
If an app wants to reconcile its own state with that of a DownloadManager,
it's helpful to know when the DownloadManager has finished restoring any
previously persisted tasks.
Also suppress initial "state changed to paused" listener invocations for
tasks that are immediately started.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195594881
- Start before stop
- Release near bottom
- Private after public
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195570480
Also convert them to exposing periods and track groups, like
regular MediaSources do. This gets us much closer to being
able to use standard track selection components during offline
initialization. The helper is responsible for reverse mapping
selected tracks onto physical streams when generating the
download action. This is trivial except for the HLS case, which
is a TODO for now.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195500826
This may be preferable for using custom binary data,
and it's still easy to store Strings if needed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195486817
The old event listener on AdsMediaSource is deprecated, in favor of
reporting in the normal way (via MediaSourceEventListener).
Add AdLoadException with information on what ad/ads failed to load.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195426144
- Support handling metadata queries (a.k.a get TrackGroupArray, which contains
Format and associated Metadata) from MetadataRetriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195401204
Upstream components may incorrectly clear the interrupted flag and not
propagate an exception when the caching thread is interrupted due to
cancellation. Pass a settable flag down to CacheUtil.cache and check it
frequently so it's not necessary to rely on the interrupted flag.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195371244
This avoids the interrupted flag being lost if the exception
is handled as an IOException.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195366244
- Made parts of DownloadActions public that were previously hidden.
This is necessary so that when an app is listening to the
DownloadManager, it can tell something about the tasks.
- Simplified DownloadActivity some more. The helpers may migrate
into their corresponding modules at some point, and also be
converted to return structured TrackGroupArrays rather than a
flat list of Formats.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195269824
Also add a build rule to simplify the test setup with a custom blacklist.
In addition, the test path pattern are made less specific to capture all the
static nullness tests in the /main/ directories.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195230334
This includes only the (hopefully) non-debatable changes for the DASH module
and all needed changes for call into the core library.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195097791
Currently it's possible to copy a master playlist with a URL
that was never present in the original. This change prevents
this, and also moves the key more in line with DASH/SS.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195065286
A single master version prevents app developers from providing
custom download functionality (because they can't increment the
version). It's also error prone to expect someone modifying the
DASH action to remember to update the ActionFile master version.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194981886
Ad load errors will be forwarded as media source load errors in the future
and other ad events are not actually player related to warrant reporting
them as part of playback analytics.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194936656
This was adding a lot of code, and the multiple use cases
for Downloader was pretty confusing (in particular the
ordering of method calls was unclear). It's also not
performant (e.g. it requires loading/parsing manifest(s)
and initialization segments from disk).
In practice I think apps will need to keep a record of
what's offlined in their app's database (or equivalent),
which they can update by registering as a listener on
DownloadManager. This will be done for the demo app in
a subsequent change.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194932876
- It's much cleaner to split completed/error notification methods.
- Make error notification show the content title in the demo app.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194920507
It's no longer necessary to stash a reference to the
error yourself. This also correctly handles the case
where setPlayer is called with a player that's already
in an error state.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194828387
This change is intended to resolve overloading of "Download",
where a DownloadTask could be an actual download task, or a
remove task.
Also cleaned up some documentation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194815058
- Redefine Scheduler interface to better describe what implementations
do. The previous version was too general, in that it allowed concrete
DownloadService implementations to pass different Requirements to
the base class and to the Scheduler. It's also difficult to see how
that version could ever support dynamic updates to Requirements, which
is probably a feature we'll need to add quite soon.
- Fix a (probably theoretical) problem where static fields in
DownloadService assumed only a single concrete implementation.
- Stop using PlatformScheduler pre-API-21 in demo app, because it will
fail.
- Define default Requirements that require network.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194785751
- It's wasted effort
- DataSpec reconstruction fails because creating a DataSpec with 0
length isn't allowed.
- Also better document DataSink open/close, to be like DataSource.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194778132
This replaces the existing listeners and provides some additional meta data
for each event.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194770421
- Add ACCESS_NETWORK_STATE to core library. It seems fairly fundamental. We should
also be using it elsewhere (e.g. to fail fast if there's no network).
- Add annotation to force apps using PlatformScheduler to declare RECEIVE_BOOT_PERMISSION
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194763051
Add a TestRunner for MetadataRetriever that roughly follow the test runner for
ExoPlayer. The TestRunner supports scheduling test steps in a sequence, compare
expected callbacks with actual callbacks, and block the test until it is done.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194518738
- When calculating the downloaded percentage in DASH, there was no
way to disambiguate between 0 of 0 segments being downloaded because
there are no cached indexes (i.e. 0% downloaded) and 0 of 0 segments
being downloaded because the index defines 0 segments (i.e. 100%
downloaded).
- Also replace use of NaN with a named constant.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194453202
Supports extracting data from AMR container format for both narrow and wide
band formats. Also added AmrExtractor as one of the default extractor to be
used in DefaultExtractorsFactory.
GitHub: #2527.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194407507
When we play downloaded content, we rely on the manifest filters
to produce a manifest that contains only the content that was
downloaded. It makes sense just to use the same filters during
download too, so we don't have to worry about any implementation
differences.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194380704
- clone() wasn't performing a deep enough copy
- Sort tracks in overrides to improve equals check
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194220596
ProgressiveDownloader never implemented this properly, and we
don't use it in DownloadManager/DownloadService, both of which
use a polling model. A polling model is also what's used elsewhere,
for example to query the current playback position.
This is effectively doing the TODO in ProgressiveDownloader.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194214579
This removes a fair chunk of code. The line delta would
be more negative if it not for adding all the /* x= */
comments in DashDownloadActionTest!
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194136689
Using addAnalyticsListener provides the same functionality with additional
information.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194071893
This removes the need for separate String/Parcelable filter paths in
the demo app. Hopefully this is a temporary measure as we work
toward using track groups + consistent keys for all media types.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194065499
Some of the events are emitted by the media periods itself and their index may
not be available in the publicly accessible timeline yet.
To prevent this, we currently check for timeline.isEmpty() only. But this may
also happen for dynamic changes, e.g. when new sources are added in fast
succession and a manifest for one of the new sources starts loading before the
updated timeline is reported.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194057401
Playback will still fail if an input sample is larger
than 32K, but will now fail gracefully.
Issue: #4057
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193951955
Also move NotificationUtil from the UI module to the core module.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193941401
- This is needed to make DefaultTrackSelector properly thread
safe, and enable atomic changes to the selector that, for
example, disable a renderer and enable another one at the same
time.
- This change also saves/restores parameters and the start
position in PlayerActivity, resolving the ref'd issue.
Issue: #3915
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193913350
This may differ from the format MIME type for audio/eac3-joc.
Issue: #4165
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193906521
If the caller wants to pass an anonymous inner class for the media description
adapter, this results in slightly more readable code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193666444
Also fix duplicate action strings when using a custom stop action, and do some
misc no-op cleanup.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193652377
This is to avoid callers needing to do an API check or suppress inlined constant
warnings.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193476188
This makes DownloadService easier to use in general and when only single
notification is used for all downloads.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193165982
*** Reason for rollback ***
Added the missing initialization to Timeline.EMPTY.
*** Original change description ***
Automated g4 rollback of changelist 192742299.
*** Reason for rollback ***
Culprit for b/78018932.
*** Original change description ***
Auto-register analytics collector in SimpleExoPlayer.
This automatically registers and deregisters an analytics collector in
SimpleExoPlayer. Doing this also allows to write integration tests checking
whether the reported window indices and media period ids are correct.
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193006701
*** Reason for rollback ***
Culprit for b/78018932.
*** Original change description ***
Auto-register analytics collector in SimpleExoPlayer.
This automatically registers and deregisters an analytics collector in
SimpleExoPlayer. Doing this also allows to write integration tests checking
whether the reported window indices and media period ids are correct.
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192816182
*** Reason for rollback ***
Rolling back to re-disable the exception as the crash is still appearing on latest version
*** Original change description ***
Automated g4 rollback of changelist 191128111.
*** Reason for rollback ***
This was a temp fix to be cherrypicked into YouTube Andorid Main App 13.12 to resolve P0 b/77315136.
*** Original change description ***
Temp fix for b/77315136: Don't lock or check cache directories in SimpleCache
To be immediately rolled back after submission
Submitting on behalf of cblay.
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192789263
I was considering putting this directly in DefaultHttpDataSource, however:
- We'd need to modify at least OkHttpDataSource as well. I'm not sure whether
Cronet follows this type of redirect automatically or not.
- HttpDataSource instances don't know how they're going to be used, so it's
probably correct that they behave like the underlying network stack.
Issue: #4108
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192745408
This automatically registers and deregisters an analytics collector in
SimpleExoPlayer. Doing this also allows to write integration tests checking
whether the reported window indices and media period ids are correct.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192742299
Allow trimming an arbitrary small number of samples (needing to trim up to two
samples actually seems to be common). For larger numbers of samples we do coarse
trimming by applying the edit list in the normal path, and don't use gapless
playback.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192736956
Currently, pending stream offset changes are kept until an output buffer
timestamp surpasses the next pending stream offset. However, this is
problematic if the next stream offset overlaps with the current output
buffer sample times (e.g. because the next stream starts at a non-zero start
time).
To correctly time the switch to the next stream offset, this change keeps
the timestamp of the last queued input sample as switch point. And we only
switch to the new offset after an output sample timestamp reached this switch
point.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192736637
*** Reason for rollback ***
Rollback only needed to cherry-pick into Photos release.
*** Original change description ***
Automated g4 rollback of changelist 190906020.
*** Reason for rollback ***
Breaks looping.
*** Original change description ***
Automated g4 rollback of changelist 190628272.
*** Reason for rollback ***
b/76391022 was caused by a timestamp correction in StabilizableSimpleExoPlayer which will be fixed with this CL.
*** Original change description ***
Automated g4 rollback of changelist 189570277.
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
**...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192621719
*** Reason for rollback ***
Breaks looping.
*** Original change description ***
Automated g4 rollback of changelist 190628272.
*** Reason for rollback ***
b/76391022 was caused by a timestamp correction in StabilizableSimpleExoPlayer which will be fixed with this CL.
*** Original change description ***
Automated g4 rollback of changelist 189570277.
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
*** Original change description ***
Used fixed time frame in clipping media period.
Currently, whenever the clipping is updated, we...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192621199
This fixes gapless playback of streams with encoder padding on devices where the
decoder could set the end of stream flag on a non-empty final buffer.
Issue: #3449
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192407924
Support parsing ID3 tags at the beginning of FLAC files, even though FLAC spec
does not require this.
GitHub: #4055.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192127929
A renderer configuration being null is equivalent to the
renderer being disabled. Remove the redundant state.
Issue: #3915
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192126015
Also added an assertion to the DRM event dispatcher to cause
immediate failure when this happens. This is consistent with
the assertion in the equivalent MediaSource class.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191892735
Also refactor the tests to make them behavioral (rather than testing the method)
and inline simple assertions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191867614
These don't seem to be needed anymore. All tests run without them in gradle
and Blaze.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191867518
In MatroskaExtractor TrueHD audio samples are joined into larger chunks. For
some streams the resulting chunked samples seem never to start with a syncframe.
This could result in playback of TrueHD streams getting stuck after seeking
because we could never read a syncframe at the start of a sample to determine
the sample size.
Instead of expecting to find a syncframe at the start of a sample, search for it
within the sample, to fix this issue.
Note: this means that we may search a few thousand bytes to find the sample
size, but the cost is only incurred for the first audio sample read.
Issue: #3845
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191775779
This field (formerly "id") is almost impossible to use so far. Having setters
in the factories allows to specify custom tags for all media sources.
Also added a ExoPlayer.getCurrentTag() method to retrieve the tag of the
currently playing media source in a convenient way.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191738754
The data collector keeps track of active media periods to assign each event to
the correct media period and/or window. This information, together with other
information like playback position and buffered duration, is then forwarded
with the event to all registered listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191726408
Previously the SonicAudioProcessor and SilenceSkippingAudioProcessor would track
their pending playback parameters and only apply them in flush(). Having the
values only take effect once flushed made the processors a bit more difficult to
use, especially because the value returned by isActive wouldn't update
immediately.
Make DefaultAudioSink only set the new speed/pitch/skip silence setting after
the audio processors have drained. This means it's no longer necessary to keep
track of pending parameter values and also fixes a bug where initial playback
parameters weren't applied because the audio processors weren't flushed while
uninitialized before DefaultAudioSink called isActive() on them.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191586727
The previous API allowed to pass in null to the constructors although variants
without listeners exist. That's why we need to handle these null values.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191577891
Partial rollback of [] which caused b/77294898 by deleting a public Exoplayer API.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191519591
Previously it was necessary to create a new Sonic instance every time the
processor was flushed. Add a flush() method to Sonic so that it can be reused
when seeking. It still needs to be recreated when parameters change.
SonicAudioProcessor and SilenceSkippingAudioProcessor have methods for setting
parameters that are documented as taking effect after a call to flush(), but
actually the value returned by isActive() was updated immediately. Track the
pending values and apply them in flush() to fix this.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191442336
We currently refresh repeatedly in this case. According to the
DASH spec omitting minUpdatePeriod indicates that the manifest
does not change, and therefore we should not refresh. I think
it might be valid to omit minUpdatePeriod in a dynamic manifest
if relying exclusively on EMSGs to trigger manifest refresh.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191420247
applyContentMetadataMutations and getContentMetadata methods suppossed to be synchronized and assert the instance isn't released.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191419637
This is in preparation for making it possible to flush a Sonic instance so that
it's not necessary to create new ones every time the processor is flushed.
There should be no behavior changes here.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191410326
To be immediately rolled back after submission
Submitting on behalf of cblay.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191128111
Weirdly, the Android Javadoc indicates that it returns something
before the API level on which the same Javadoc states it was added.
In any case, we can simply not call the method to avoid the
warning, since we only use the value if the API level is at least
23 anyway.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190941776
Video renderers assume that the player position is advancing linearly while in
the started state. MediaCodecVideoRenderer schedules frames for rendering in the
future in the expectation that the player position is advancing.
This assumption is not currently true when using a position from the AudioTrack:
the player position can be fixed for (in the worst case) up to about 100 ms
before it starts increasing. This leads to an effect where the first frame is
rendered then a few other frames are rendered, then there's a pause before
frames start being rendered smoothly.
Work around this issue by checking whether the position has started advancing
before scheduling frames to be rendered in the future.
It might be preferable to make the audio renderer only become ready when its
timestamp can start advancing, but this is likely to be complicated.
Issue: #3841
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190937429
In audio processors an audio frame consists of a sample (which is 2 bytes for
16-bit PCM) for each channel. Sonic used "sample" to refer to this.
We've already diverged from the original source for Sonic quite a bit (deleting
code and making stylistic changes) and there haven't been upstream changes so
far, so it seems fine to start making more substantial changes here.
There should be no behavior changes here.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190916793
Use string concatenation for Metadata.Entry instances, and add
Util.formatInvariant for numerical formatting.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190915643
This adds two options to the ClippingMediaSource which allow proper clipping
of live streams:
1. The clipping stays fixed relative to already created media periods. That
means that playback actually progresses through the clipped media and
eventually reaches the end of the clipping. The window is also marked
as non-dynamic to let playback end in this case.
2. Allow to specify a clipping duration relative to the default position to
be able to specify the duration of live stream which is to be played.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190911049
*** Reason for rollback ***
b/76391022 was caused by a timestamp correction in StabilizableSimpleExoPlayer which will be fixed with this CL.
*** Original change description ***
Automated g4 rollback of changelist 189570277.
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
*** Original change description ***
Used fixed time frame in clipping media period.
Currently, whenever the clipping is updated, we move the time frame of the
clipped period to start at 0. This causes problems when we are already playing
this period and the renderer position does no longer match the stream
positions.
This change keeps the time frame of the...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190906020
- Ensure that no memory is used by audio processors that are always inactive, by
only allocating in flush() if active. If data was already allocated but a
processor becomes inactive we assume that the allocation may be needed in
future so do not remove it (e.g., in the case of ResamplingAudioProcessor).
- Make SilenceSkippingAudioProcessor set up its buffers in flush(), and clarify
that it is always necessary to call flush() if configure() returns true.
- Make reset() reset all state for all processors.
- Use @Nullable state or empty arrays for inactive audio processor buffers.
- Miscellaneous style/consistency cleanup.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190895783
This uses a simple threshold-based algorithm for classifying audio frames as
silent, and removes silences from input audio that last longer than a given
duration.
The plan is to expose this functionality via PlaybackParameters in a later
change.
Issue: #2635
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190737027
They don't really belong there; it was basically a convenience
thing where one of the arguments to the track selector was being
packaged up in the result to avoid having to hold a separate
reference to it.
This change is being made as a precursor to a subsequent change
where creating the TrackSelectorResult will move from
MappingTrackSelector to DefaultTrackSelector. DefaultTrackSelector
doesn't currently have access to the un-mapped tracks, and so is
unable to create a TrackSelectorResult. It's IMO preferable to
keep it that way rather than passing them down just so they can
be included in the result.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190640594
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
*** Original change description ***
Used fixed time frame in clipping media period.
Currently, whenever the clipping is updated, we move the time frame of the
clipped period to start at 0. This causes problems when we are already playing
this period and the renderer position does no longer match the stream
positions.
This change keeps the time frame of the clipped media period as it is and
instead specifies the offset of the window in the period.
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190628272
Erroneous condition:
===================
If the track selection contains a subset of the available variants in the
master playlist, but only the selected variants return 404, the playlist
tracker will never propagate the error.
Fix:
====
The Chunk source will propagate the playlist load error if no more
alternative playlists are available (because all are already blacklisted).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190624484
Currently, MediaPeriod states that continueLoading may be called
during preparation. Some implementations would throw an error if
this happened.
Also make MediaPeriod documentation clearer.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190596870
If the AudioTimestamp was sampled before play() was called, it was incorrectly
returned to the caller for sanity-checking. Fix this behavior by dropping the
timestamp internally in the AudioTimestampPoller.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190584412
This change enables feeding decoders from the closest sync frame
before a specified seek position, where-as previously we'd
always feed decoders from the start of the chunk. This avoids
decoding and discarding many audio samples during each seek. The
same benefit also applies to video chunks containing more than
one key-frame.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190539547
This will allow SimpleExoPlayer to auto-register its own listener before the
drm session manager is used to set-up the renderers.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190478174
This adds callbacks for creating, releasing, and starting to read from media
periods.
Such events allow listeners to keep a list of active media periods. This is
useful to determine when no further events for a certain media period are
expected. It also allows listeners to associate renderer events unambigiously
with a reading media period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190462717
And in ContentMetadata javadoc emphasize that it's a snapshot.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190461436
This gives the MediaSourceEventListener API a consistent look when new methods are
added which only have a window index and media period id.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190450270
This was only needed to ensure a ClippingMediaSource can provide samples from
a key frame before the clipping start time. Now the ClippingMediaSource will
not report negative timestamps, this workaround can be removed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190045302
This will never happen in practice, since CEA608 shouldn't be encrypted (and we
can't handle it if it is), but in theory appendSampleEncryptionData can be called,
then skipFully can throw when applying the CEA608 transformation, then when
retrying appendSampleEncryptionData will be called again for the same sample.
appendSampleEncryptionData consumes from trackFragment.sampleEncryptionData, and
so the second time around data is being consumed one sample ahead.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189931631
The ad events are independent of the other media source events. Also,
registering the listener to the internal ad media sources will report the
regular media source events twice: once directly (with a non-ad media period
id) and once through the wrapping ads source (with the correct ad media period
id).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189905561
Also convert left side from milliseconds to microseconds for comparison
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189784833
Add logic to poll AudioTimestamp at different rates depending on when
playback starts and how the audio timestamp advances.
This fixes a pause about 500 ms after starting playback that occurs on some
devices and also makes our polling interval match the recommendations of the
AudioTrack documentation.
Issue: #3830
Issue: #3841
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189765200
When creating DeferredMediaPeriods, we don't know the actual timeline yet and
thus the default position is also unknown. We can still forward the correct
default position by forwarding it the deferred media period as soon as it
becomes known.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189763460
As part of pausing DefaultAudioSink, its position-related fields are reset. If
the audio timestamp API was in use, this results in falling back to the
getPlaybackHeadPosition API, which (on some devices) can lead to a jump in the
reported position.
Sample the position before pausing instead of after, to avoid this jump.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189713376
This is achieved by automatically registering a listener for child sources in
compositions. The composite media source has the chance to correct the
reported window index and media period id in the MediaLoadData of the events.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189575414
Currently, whenever the clipping is updated, we move the time frame of the
clipped period to start at 0. This causes problems when we are already playing
this period and the renderer position does no longer match the stream
positions.
This change keeps the time frame of the clipped media period as it is and
instead specifies the offset of the window in the period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189570277
DefaultAudioSink had a lot of code related to tracking the position of the
underlying AudioTrack, and working around issues with the position APIs.
Move this code to a separate class responsible for position tracking. This is in
preparation for improving the audio timestamp polling behavior.
This change is intended not to cause any behavior changes.
Issue: #3841
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189344743
This allows to test sending events when using fake media sources.
The FakeMediaSource now simulates a manifest load when being prepared.
And the FakeMediaPeriod simulates a media load when being prepared.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189205285
Currently, we are treating all codecs starting with "mp4a" as AAC. However,
some codec strings starting with "mp4a" are not AAC format, as should be
treated differently.
GitHub: #3779
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189163517
This is a step towards factoring out position tracking functionality.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189155624
This is a first step towards factoring out position tracking functionality.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=189027731
This allows to distinguish between media source events of multi-window and
multi-period media sources. In this change, only media sources currently reporting
events are changed. Proper support in composite sources will be added in a later
change.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188847366
This change also simplifies reporting the right media source events in a
future change.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188718504
This is achieved by moving the listener registration and the creation of the
event dispatcher into BaseMediaSource.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188461932
As it turns out there isn't much gain by subclassing
AbstractContentMetadata. Moved abstract onChange method to a listener
interface.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188353673
This allows to keep the same window sequence number if playback fails and
is then retried without resetting the position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188339509
The value is increased to 50 seconds. With that the player can better handle
short network problems. This does NOT increase the maximum memory used as we
still apply the seperate DEFAULT_TARGET_BUFFER_BYTES.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188335603
When creating a new AC-3 passthrough AudioTrack the position
may advance from an old AudioTrack's position. The workaround
checked for the playback head position returning to zero, but
a subsequent change meant that we'd always start writing data
to the new track immediately (rather than waiting for its
position to 'stabilize' at zero).
Fix the issue by using the AudioTrack position directly. (Nb.
this doesn't handle the case of the stale position before
unwrapping being zero, but it is very unlikely to occur.)
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188319795
Also simplified shouldContinueLoading condition code and added a builder for DefaultLoadControl.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188306213
This allows to know the duration immediately and fixes the temporary unknown
duration in the UI when repreparing the same extractor media source.
The isSeekable property is still reset to false as we can't actually seek
until the seek map has been reloaded.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188145860
Also remove logic for tracking the next output buffer in LibvpxVideoRenderer, as
this allowed many consecutive frames to be rendered that were actually late
after dropping to keyframe. It looks better to show frames at a consistent
100 ms rate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188144739
The playback state in ExoPlayerImpl and ExoPlayerImplInternal is usually kept
in sync. Only the timeline was so far not updated in the same way with the
internal player using a null timeline while ExoPlayerImpl keeps the previous
timeline.
This change removes the need to keep a null timeline which allows to update
the internal timeline in the same way as the external one. This fixes problems
when retrying a failed playback multiple times.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188034988
The start position was set to the old start position instead of the current
playback position. We need to set the start position to the current playback
position to ensure a repreperation with the same media starts from the last
playback position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188025439
Previously, child source ids were reassigned when the media source is reused.
Now the creation of the ids moved to outer level to stay in sync with the list
of child media sources.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=188014739
This restores functionality that was lost when we added
support for general timed message delivery.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187866807
This value can now be set in the DefaultBandwidthMeter instead. As a result
NO_VALUE can be removed from BandwidthMeter as we now always provide an
estimate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187865341
This simplifies clearing a playlist without having to call removeMediaSource
repeatedly. It will also update the timeline only once.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187863857
There is a large number of repeated arguments in the callback methods of
MediaSourceEventListener. Grouping them into load related data and media
related data allows to significantly reduce the amount of boiler plate code
and also simplifies future extensions of either set of data.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187857252
This value is logically part of the bandwidth estimation and will eventually be
moved there from the adaptive track selection.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187597038
Before this change, HlsMediaSource timelines had a period starting at the epoch.
For VOD streams the window position in the period was the program date time.
This change makes period and initial window positions match. For live streams
the window position advances as segments are removed, so its position in the
period is the difference between the initial program date time and the program
date time of the latest playlist.
This also makes it possible to insert ads in VOD HLS content with program date
time, as the period and window are now aligned.
Issue: #3865
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187590948
1. Allow retaining a decoder without any reconfiguration, in addition
to retaining with reconfiguration (and not retaining)
2. Fix retention logic for video decoders to take into account changing
ColorInfo
3. Allow retention of audio decoders when possible
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187500285
Added a note about using TextureView only on hardware accelerated window.
Issue: #3901
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187498594
Currently, AspectRatioFrameLayout may need to resize itself if it could not
satisfy a target aspect ratio. User may want to know when this happen, or
whether this can happen, so they can update their UI accordingly. For
example: show/hide a button to toggle different resize mode only when the
aspect ratio of the view and the content is very different.
GitHub: #3736
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187484241
- Change 'compile' configuration (deprecared) to using 'implementation'
and 'api' configurations instead.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187311778
The non-dynamic media source has a strict subset of features of the dynamic one and
thus can be replaced.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187299432
Without child sources, the timeline can't possibly updated again within the
current looper message. Thus, we can send the empty timeline immediately.
This fixes a recently introduced flakiness in the test.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187295700
ClippingMediaSource provides a timeline where the period and window have the
same start/end positions, so when clipping a child timeline with a non-zero
offset between the window and period it is necessary to clear the offset then
apply the offset to the start/end positions used in the ClippingMediaPeriod.
Also add a message to clipping exceptions.
Also fix adjustment of seeks to the start of the clipped view.
Issue: #3888
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187292506
This is achieved by adding a BaseMediaSource which keeps a reference count of the
number of times the source has been prepared and forwards to the actual implementations
only once, such that only minimal changes are needed for each media source.
Issue:#3498
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187186691
Up to now we use a boolean "preventListenerNotification" to suppress updates
while other operations are still in progress. This ensures, for example, that
only one initial timeline is issued even for multiple child sources.
As soon as we allow to reuse the same instance, it becomes increasingly difficult
to manage this manual listener notification suppression. Therefore, this change
schedules an update as a new message on the playback thread immediately after the
current message. This way, we also ensure that all simultaneous updates within one
looper message iteration are reported together.
Issue:#3498
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187180342
The util package is, in practice, for things that are misc enough
to not warrant their own package. If something is deserving of a
package, it's IMO best placed somewhere else (I know you could
argue it's a util, but you could argue that about almost anything
else as well).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=187010018
Allow the position to jump on receiving the first presentable input buffer,
if and only if the buffer timestamp differs significantly from what was
expected. This prevents a stuck buffering case for streams that are thought
to start at t=0, but actually start at t=large_value.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=186990214
The waiting for a ConditionVariable to be false was replaced by a
CountDownLatch whose count is asserted to be one. The timeout of a
ConditionVariable doesn't work in Robolectric unless someone is
manually increasing the SystemClock time.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=186003125
If an exception is thrown in an IMA callback it crashes the process with lots of
logging from WebView (including several stack traces, etc.). This change wraps
ImaAdsLoader code that might throw, skips any remaining ads (as the errors are
not recoverable, in general) and notifies a new load error callback so that the
application can implement its own handling. The intention is to make the loader
robust to unexpected requests from IMA and avoid crashes.
Also handle IMA loading an ad in an ad group that has no available ads. In rare
cases IMA will try to load an ad for which an error was previously notified, so
this drops those load requests allowing playback of the content to continue.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185985850
All media periods are part of a queue of windows buffered and played by
ExoPlayer. When repeating windows, the current MediaPeriodId is insufficient
to distinguish between the repetitions of the same period. This makes it hard
to see to which media period load events belong to, and it is also difficult to
determine whether two media periods belong to the same logical window or
whether they are part of different repetitions of the same window.
Therefore this change adds a unique sequence number to each window in the
sequence of windows and this sequence number is saved as part of the
MediaPeriodId.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185829509
Also added comments for all existing devices for easier reference.
Issue:#3835
Issue:#3236
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185661900
Also make ad group skipping more robust. After calling onError for an ad, IMA
will sometimes trigger an ad group load error, so this needs to be handled in a
way that allows some ads to be loaded already for the ad group.
This change also fixes calculation of the expected ad index to take into account
whether the position is being faked to trigger loading an ad or is the actual
player position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185655844
Releasing the player released the internal playback thread once renderers were
released. Releasing a MediaPeriod queued a Loader.ReleaseTask on the loading
thread which would post back to the playback thread. If the playback thread had
been quit by the time this happened, the release task wouldn't be run.
Release on the loading thread instead of the playback thread. This avoids
needing to block releasing the player until the loading threads have ended, and
ensures that release tasks will run eventually. As part of this change,
ExtractorMediaPeriod's call to Extractor.release will now run on the loading
thread (which means that all Extractor methods are called on that thread) and
other cleanup in ReleaseCallback will run on the loading thread instead of the
playback thread.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185651320
There are 4 tests which can't currently be moved:
- DownloadManagerTest explicitly uses the main looper which isn't easily
supported because the test runs on this thread.
- ContentDataSourceTest uses an AssetFileDescriptor which wraps a
ParcelFileDescriptor. It seems Robolectric doesn't correctly forward the
inner wrapped file descriptor leading to NPE.
- CacheContentIndexTest and SimpleCacheSpanTest both work fine with Gradle
but fail with seemingly valid test failures on Blaze.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185366678
If the period uid doesn't match, the update procedure currently doesn't
remove the correct periods. This may cause the player to get stuck or to play
the wrong periods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=185129503
Allow skipping an ad group when requested by IMA, even if we aren't currently
playing one, to handle cases where no ads in an ad group will load (so IMA
requests resuming content but we never managed to start playing an ad).
Use the known ad group index (rather than the expected one) when handling ad
group load errors. This ensures we skip the right ad group if we notify IMA of
playback errors for every ad in the ad group, then IMA notifies that the ad
group is empty via a load error.
Also make some other miscellaneous small fixes to ads code:
- Avoid warning about unexpected ad group indices more than once.
- Output a warning if the ad count in an ad group decreases.
- Remove unnecessary assertion.
- Fix getting the ad duration for ad indices that haven't loaded yet.
- Allow setting an ad group state to its current value.
- Fix javadoc for setting the ad resume position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184831495
The ad index in the ad group may need to skip over ads that failed to load, so
it can't just be incremented any more.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184812556
This feature is supported in the ConcatenatingMediaSource and is easily copied to this
media source. Also adding tests to check whether the atomic property works in normal
concatenation and in also in nested use.
Also fixes a bug where timeline methods of the DeferredTimeline were not correctly
forwarded.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184526881
This could happen when a media source is removed from a
DynamicConcatenatingMediaSource and one of its media periods is still active.
This media period is only removed by the player after the player received
a timeline update and thus we shouldn't release the removed child source
as long as it has active media periods.
Issue:#3796
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184522836
Resolve the media period for ad playback when resolving a subsequent period and
when receiving a timeline where the playing period in range (but wasn't before).
Fix the seek position calculation when a current ad must be skipped and is
followed by another ad.
Check MediaPeriodInfos match when checking MediaPeriodHolders, to handle cases
where a future ad should no longer be played. This may involve playing two
content media periods consecutively.
Issue: #3584
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184514558
DefaultExtractorInput.SCRATCH_SPACE buffer is used to skip data by
reading it into this buffer and discarding.
Simultaneous use of skip methods corrupts this buffer. Normally the
read data is discarded so it doesn't matter but the underlying
DataSource may use the buffer too. If it's a CacheDataSource it uses
this buffer to read data from upstream then write to cache.
Issue: #3762
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184502170
This avoids reading a format that is not equal because of switching between
NO_VALUE and 0.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184298076
This makes assertion errors in code running on the Looper less easy to miss.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184294290
For below API level 16, the logic copied from ConnectivityManagerCompat.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184131406
Helper class to create notifications for downloads using DownloadManager.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183225948
Even if a developer synchronizes every method, thread safety is still not guaranteed
because the internal callback methods can't be synced from outside.
Issue:#3773
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184122072
1. Add string for STATE_CANCELED. Lint doesn't like that the
switch statement on the state IntDef doesn't have a case
for STATE_CANCELED. May as well add one, even if we're not
planning on our demo app showing notifications for this
state.
2. Replace non-human-readable error message with one provided
by ErrorMessageProvider.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184120892
In the case of the components we deliberately access via
reflection, it's normal that they might not be resolved
due to proguarding (i.e. if the app isn't being built to
include them). Don't note their omission.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184120611
Lint recommends switching to SparseArray<X> instead.
This is done for the DASH case. For the Cast case it's
easier to use a switch statement.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184119312
I think (?) they're harmless, but lint doesn't like them.
Using them within the class body means the TargetApi
annotation applies, which makes lint happy.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184117951
In MediaCodecRenderer, we currently uses codec.getInput/OutputBuffers event
though these APIs are deprecated and are not recommended from API 21+. This
change makes sure that:
- On API 20 and below, we will keep using codec.getInput/OutputBuffers.
- On API 21+, we will use getInput/OutputBuffer(index) APIs instead.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184112329
*** Reason for rollback ***
Broke everything
*** Original change description ***
Clean up message naming in EPII
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184061352
This applies when PlayerControlView is used as a standalone
component (not inside PlayerView). Previously hideAtMs was
set to 0, which caused the view to be immediatley hidden in
onAttachedToWindow. After this change the first time the view
is attached to the window is effectively treated as a "user
interaction" for the purposes of deciding when to timeout.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=184056324
This make sure all media sources can be reprepared after being released.
Issue:#3498
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183990416
When the dynamic media source contains multiple empty timelines in a row and some
of them dynamically change to a non-empty timeline, the window and period indices
are not updated correctly because the index of the changed child source is wrong.
To fix this bug, the child index is added to the media period holder to have direct
access on the current child index to prevent ambiguity.
Furthermore, the uid is changed to be the hash code of the MediaSourceHolder not the
MediaSource itself to allow adding the same MediaSource twice without violating the
unique uid policy.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183973462
Also fixes a bug where deferred media periods were kept in the list for
an unprepared media source although the media period was already released.
Issue:#3498
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183800889
This enables caching manifest files for DASH, HLS and SmoothStreaming.
To disable caching a non cache DataSource should be provided for reading
manifest to the used MediaSource.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183794252
In startReadWrite*() methods a new CachedContent is created if the there
isn't one already for the given key. If the span is release without
writing any content, this fix removes the added CachedContent.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183666821
Before this change, the ad playback state stored the number of played ads in
each ad group. There was no way to represent that an ad had failed to load (and
it wouldn't be possible just to increment the played ad count to signal a load
error because there might be an unplayed ad before the ad that failed to load).
Represent the state of each ad (unavailable, available, skipped, played, error)
in each ad group. In a later change the player will use this information to
update its loaded MediaPeriods in response to future ads failing to load.
Also make the AdPlaybackState immutable and remove copying/duplication of its
fields in the ad timeline and period.
Issue: #3584
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183655308
For our strings to be translated, we're required to provide
added context in the form of a description, and specify a
maximum length for the translated strings.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183651515
1. When we try and load something via reflection and find the
class, always throw rather than failing silently if we
subsequently fail to instantiate an instance. This is
indicative of a broken proguard setup, and failing silently
makes it hard to spot.
2. Add library/core proguard configuration to ensure extension
renderer constructors that we access via reflection are kept.
3. Add demos/main proguard configuration to ensure ImaAdsLoader
constructor that we access via reflection is kept.
4. Added IMA proguard file to hopefully fix#3723, although I
wasn't actually able to reproduce the issue.
Issue: #3723
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183648187
- Renderers becoming ready is asynchronous, so the change wasn't
well thought through :(.
- This will bring back the possibility of getting stuck in the
buffering-but-not-loading anything state. This will need to be
addressed in a future CL.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183646837
100ms is unrealistically short and, for example, causes the player to buffer
many periods ahead when looping.
Previously this was not feasible, because ExoPlayerTest as instrumentation test
actually needed to wait for the realtime playback duration.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183646772
MediaPeriodInfoSequence has functionality for determining what MediaPeriod
should be loaded next. Move this into the queue as an initial step towards
moving logic concerning updating the queue of media periods out of
ExoPlayerImplInternal.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183391114
This removes some boiler-plate code for compostite sources and will also
simplify resuing media source in the future (because this class can keep track
of child listeners).
Issue:#3498
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183387123
This is only allowed for user-replaced manifest uris. If the manifest
itself forwards to another manifest, we keep the original manifest in
case the forwarding changes.
Also removed the initialManifest as it can be simplified by using the
sideloadedManifest indicator.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183376209
When SsMediaSource loads Manifest, it dispatches loadCompleted event even when
the load is cancelled. This change makes sure SsMediaSource dispatch
loadCancelled event instead.
GitHub: #3754
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183241940
Since AspectRatioFrameLayout supports zoom mode as another resize_mode,
PlayerView's resize mode xml attribute should include this as well.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183237663
Helper class to create notifications for downloads using DownloadManager.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183225948
- This gives LoadControl enough information in shouldContinueLoading
to know whether returning false will result in a terminal non-playback
state.
- DefaultLoadControl will always return true when returning false will
result in a terminal non-playback state, unless the target buffer size
is exceeded. This can help to avoid getting stuck in the case that a
MediaPeriod is providing samples from an unexpected starting time.
- Make the terminal state actually terminal. Previously the player would
end up in an indefinite buffering state. We now fail with an error.
- Also remove the opportunity for LoadControl implementations to livelock
playback. No sane LoadControl should simultaneously tell the player that
it doesn't want to load anything and that it doesn't want to start
playback. So this change removes the opportunity and starts playback in
EPII instead in this case.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183114797
Try to delay failure for as long as possible. That is, propagate
DRM session failures only after an encrypted buffer arrives or clear
sample playback without session is not allowed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=183076348
setBytesRemaining() doesn't work when called after closeCurrentSource()
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182999254
These parsers can be used to get a manifest which includes only the
representations identified by the given keys.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182932874
So far this wasn't possible because Robolectric's Looper and MessageQueue
implementations have multiple shortcomings:
1. The message loop of new HandlerThreads is an not an actual loop and
scheduled messages are executed on the thread the message is enqueued
(not the handler thread).
2. The scheduler used to replace the message queue is synchronizing all its
methods. Thus, when a test attempts to add messages to a Handler from
two different threads, it may easily run into a deadlock.
3. The scheduler doesn't correctly emulate the order of messages as they
would be in an actual MessageQueue:
a. If the message is enqueued on the handler thread, it gets executed
immediately (and not after all other messages at the same time).
b. The list of messages is always re-sorted by time, meaning that the
order of execution for messages at the same time is indeterminate.
4. Robolectric's SystemClock implementation returns the current scheduler
time of the main UI thread. So, unless this scheduler is used to add
messages in the future, the SystemClock time never advances.
This CL adds two helper classes which extend and replace Robolectric's
ShadowLooper and ShadowMessageQueue.
1. We intercept messages being enqueued or deleted in the message queue.
Thus Robolectric's faulty scheduler gets never used. Instead, we keep
a blocking priority queue of messages, sorted first by execution time
and then by FIFO order to correctly emulate the real MessageQueue.
2. We also keep a list of deleted messages to know which messages to ignore
when they come up in the looper.
3. When a new Looper is started, we override the dummy loop to an actual
eternal while loop which waits for new messages, checks if they haven't
been deleted, and runs the messages (similar to what Robolectric's
MessageQueue would have done at this point).
Because we don't actually use the main UI thread in our tests, we can't rely
on the SystemClock to progress in any sensible manner. To overcome this issue,
we can use the auto-advancing FakeClock also used for the simulation tests.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182912510
This achieves two things:
1. All our tests use the same type of assertions.
2. The tests currently run as instrumentation test can be moved to
Robolectric without changing the assertions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182910542
These were caused by two issues:
1. The FakeMediaSource can be updated with a new timeline. The setNewSourceInfo
is called from a different thread than prepareSource and both access local
variables without synchronization.
2. For multi-window playback, the FakeRenderer claims that isReady and isEnded
are both set to false if it read the end of the stream. However isReady should be
true because it is able to "render" its data until the end of the stream.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182785169
When a loaded DASH manifest is invalid (either some periods were removed
illegally, or a manifest for a live event is stale), we will retry using 1
logic:
- Retry loading with back-off up-to a limit.
- Throw a DashManifestExpiredException() if we exceed retry limit.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182770028
Also disable use of dummy surface for devices that require the
workaround. It's only useful in the case that we can use
setOutputSurfaceWorkaround, so if it's disabled the dummy surface
has no purpose (it actually makes things worse by consuming past
the key-frame prior to the current position, which doesn't happen
if you have no surface at all).
Issue: #3724
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182750068
This fixes a very specific case where the data read has non-cached gaps
and a read-only CDS switches to read from upstream in a gap then the
cached data is deleted. When the CDS reaches the end of the gap, it
tries to open the next source. As there is no cached data, it tries to
continue with the already opened upstream data source but as it reached
end of the gap range, the code starts looping.
Also fixes infinite lock which occurs when in the previous case CDS isn't
readonly. It locks the content while filling the gap in the cache. At the
end of the gap, as the following data is deleted it tries to lock the
content for writing but the content is already locked by itself.
The last fix is preventing removal of CachedContent entry from
CachedContentIndex while associated key is locked.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182595426
Some tests in ExoPlayerTest issue commands to the player from the test thread
while the player is actively playing media (playWhenReady=true). Due to the
indeterminate time taken to enqueue the commands on the playback thread, they
may arrive when the player already proceeded to another window or finished
playback.
To ensure the tests are always deterministic, this change pauses playback in
the tests where this may happen before issuing the commands.
Also, for tests where we need to wait for a new window before issuing the
next command, a new action is added which allows to play until a specified
position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182535096
- Get handling of "stale" and "out of sync" manifests so
they're right next to each other (to be merged)
- Move startLoadingManifest to be next to the methods that
schedule it, and actually start loading stuff.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182530683
As soon as the seek gets acknowledged by EPII, EPI returns the actual position
from the playback info again which is set by EPII. Thus, EPII needs to update
the position to reflect the changes expected by EPI.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182515106
- In IDLE, the button will now call a preparer. This allows
removal of the separate retry button from the demo app.
- In ENDED, the button will seek back to the default position
and play.
- Behavior is made consistent with LeanbackPlayerAdapter.
Issue: #3689
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182506855
When determining the next sample to load, the Mp4Extractor now takes
into account how far one stream is reading ahead of the others.
If one stream is reading ahead more than a threshold (default: 10 seconds),
the extractor continues reading the other stream even though it needs
to reload the source at a new position.
GitHub:#3481
GitHub:#3214
GitHub:#3670
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182504396
It seems good to have EventLogger available from the library.
In particular because when app developers use it and then
submit bug reports, it makes it much easier to work out what
happened. It will also allow EventLogger to be used across
our (now multiple) demo apps.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182389407
This gets rid of the manual tracking of this queue with reading, playing,
and loading period holders. Still keeping these names for queue access methods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182378944
This solves the problem of having dense tracks' ids change.
For example, if the available variants offer both HEVC and AVC video
tracks, all video samples will map to the same sample queue even if
IDs don't match.
Issue:#3653
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182070486
This avoids issues that can arise due to slight discrepancies between
chunk start times (obtained from the manifest of segment index) and
the timestamps of the samples contained within those chunks.
Issue: #2882
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182054959
For live streaming, there are several types of DASH `emsg' events that directly
target the player. These events can signal whether the manifest is expired, or
the live streaming has ended, and should be handle directly within the player.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=182034591
This allows listeners to get notified of any change to the embedded tracks.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181969023
ChunkSampleStream.seekToUs assumes that if we can seek within the
primary sample queue, we can also seek within the embedded queues.
This assumption can be violated fairly easily if discardBuffer is
called with toKeyframe=true, since this can cause samples to be
discarded from the embedded queues within the period for which a
seek in the primary sample queue will succeed. This change fixes
the issue.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181965902
These haven't been included in the recent changes but can be reported as
soon as the first sample of each stream is read.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181753141
We added the other callbacks some time ago, but didn't include onLoadStarted.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181743764
This it to distinguish between actual period transitions and the
transitions occuring to and from ads within one timeline period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181606023
Partial reads were performed once using a partial size of 1 byte.
This was not enough to detect problems which only occur in combination
with IOExceptions. Partial reads are now only applied when no exception
is thrown.
Moreover, the tests didn't check whether the total number of sampled bytes
is what it is supposed to be. Added a field to the data dumps checking
the total number of bytes in the sampled data.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181296545
----------------------------------
Original change description:
DRM fixes
- Parse multiple kids from default_KID. It's specified as a whitespace
separated list of UUIDs rather than a single UUID.
- Opportunistically proceed with playback in cases where the manifest
only defines a single SchemeData with the common PSSH UUID. In such
cases the manifest isn't saying anything about which specific DRM
schemes it supports.
Issue: #3630
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=181137621
This lets apps fail-fast when they try to reuse media source instances.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180934445
If SimpleExoPlayer is using TextView as output, we can handle video rotation by
automatically applying a matrix transformation to the TextureView when we have
this information available from the video (from video's metadata).
GitHub: #91
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180925571
In certain conditions CacheDataSource switch to reading from upstream
without writing back to cache. This change makes it detect the change of
these conditions and switch to reading from or writing to cache.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180901463
DASH manifests can now contain non-null but incomplete
DRM init data. Hence using the manifest init data when
non-null is not always the correct thing to do. This
change merges the sample and manifest formats (which
correctly merges the DRM init data) and then uses the
result.
Issue: #3630
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180787784
- Parse multiple kids from default_KID. It's specified as a whitespace
separated list of UUIDs rather than a single UUID.
- Opportunistically proceed with playback in cases where the manifest
only defines a single SchemeData with the common PSSH UUID. In such
cases the manifest isn't saying anything about which specific DRM
schemes it supports.
Issue: #3630
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180675056
This removes the need to calculate the time needed to run the doSomeWork
method. Consequently, we can use both the real Clock/Handler and the
FakeClock without changing the way the playback loop works and without
violating the interfaces of Clock or Handler.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180665647
Some readability fixes for PlayerMessage and the handling in
ExoPlayerImplInternal.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180544294
Whilst the previous behavior was WAI and had the advantage of
updating the position to be more exact when known, there were
a couple of disadvantages:
1. If seeking to the very end of a period in a playlist when
paused, the position adjustment could trigger a position
discontinuity to the next period.
2. We de-duplicate seeks to the current playback position.
The position adjustment can prevent this from being
effective. This is particularly important with the new
SeekParameters support. When seeking to nearest sync point
it's often possible to de-duplicate seeks, but we cannot
do so if the playback position adjusts away from the sync
point's time.
Issue: #2439
Issue: #2882
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=180540736
This ensures message order if multiple custom messages running on the
playback thread and direct player commands are called immedately after
each other.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179925852
This allows to inject a FakeClock for tests. Other playback components
(e.g. some media sources) still use SystemClock but they can be amended
in the future if needed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179921889
Especially this removes the need for the Clock interface to directly
implement Handler methods. Instead, we have a separate Handler interface
and the FakeClock is able to construct such a Handler.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179918255
If ClippingMediaSource contains a child MediaSource with embedded metadata
stream, and the embedded stream is being used, it can lead to
ClippingMediaSource not be able to stop after the clipping end point. The
reason being the metadata stream cannot read anymore sample, but it's also not
end of source at that point. This CL fix this by changing the condition to
check if the child stream cannot read anymore sample and it has read past the
clipping end point.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179918038
This adds options to ExoPlayer.sendMessages which allow to specify a window index
and position at which the message should be sent. Additionally, the options can be
configured to use a custom Handler for the messages and whether the message should
be repeated when playback reaches the same position again.
The internal player converts these window positions to period index and position
at the earliest possibility. The internal player also attempts to update these
when the source info is refreshed. A sorted list of pending posts is kept and the
player triggers these posts when the playback position moves over the specified
position.
Issue:#2189
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179683841
*** Original change description ***
Add possiblity to send messages at playback position.
This adds options to ExoPlayer.sendMessages which allow to specify a window index
and position at which the message should be sent. Additionally, the options can be
configured to use a custom Handler for the messages and whether the message should
be repeated when playback reaches the same position again.
The internal player converts these window positions to period index and position
at the earliest possibility. The internal player also at...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179666357
This adds options to ExoPlayer.sendMessages which allow to specify a window index
and position at which the message should be sent. Additionally, the options can be
configured to use a custom Handler for the messages and whether the message should
be repeated when playback reaches the same position again.
The internal player converts these window positions to period index and position
at the earliest possibility. The internal player also attempts to update these
when the source info is refreshed. A sorted list of pending posts is kept and the
player triggers these posts when the playback position moves over the specified
position.
Issue:#2189
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179563355
- Lint doesn't like a static import of something not available on
the minimum API level.
- The method linked to in the Javadoc was incorrect (wrong signature).
I couldn't really work out why it was there, so I got rid of it
rather than updating.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179222587
Update PlaybackControlView and SimpleExoPlayerView so when showTimeoutMs is set
while the controller is shown, the new timeout takes effect immediately.
GitHub: #3554
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179171727
This adds a parameter to configure a maximum buffer size in bytes. If left
at its default of C.LENGTH_UNSET, the target buffer is determined using a
overridable method based on the track selection. Also adding a parameter
to decide whether to prioritize time or size constraints.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179048554
They worked without being present in the declare-styleable,
but they need to be present for Android Studio auto-complete
to suggest them.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179047478
Also fix ClippingMediaSource to consider the start position an
artificial key-frame, and to properly offset the value returned
by getAdjustedSeekPositionUs.
Issue: #2882
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179032243
Skipping short periods in a while loop is conceptually a new operation
and thus we need to send out the updated playback info in between for
the listeners to receive multiple period transition discontinuities.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=179027334
