Setting a `null` value doesn't remove the key as expected per the `MediaFormat` API documentation, using the `removeKey` method instead which is only available starting API level 29.
PiperOrigin-RevId: 646462402
ExoPlayer used to call `stop()` before `release()`. This was removed in
<unknown commit>.
A framework bug introduced in Android 11 (API 30) resulted in some
DRM -> clear transitions failing during `MediaCodec.configure()`. An
investigation in Issue: google/ExoPlayer#8696 and b/191966399 identified that this was
due to `release()` returning 'too early' and the subsequent
`configure()` call was then trying to re-use a `Surface` that hadn't
been fully detached from the previous codec. This was fixed in
Android 13 (API 33) with http://r.android.com/2094347.
ExoPlayer worked around the framework bug by adding an arbitrary 50ms
sleep after a failed codec initialization, followed by retrying. This
was enough to resolve the problem in the test scenario on a OnePlus
AC2003.
Issue: androidx/media#1497 points out that 50ms might not be the appropriate delay
for all devices, so it's an incomplete fix. They suggested re-adding the
`MediaCodec.stop()` call instead. This also reliably resolves the issue
on the OnePlus AC2003 (with neither workaround in place, the problem
repros almost immediately).
PiperOrigin-RevId: 646461943
Extractors should not report additional tracks once they called
ExtractorOutput.endTracks. This causes thread safety issues in
ProgressiveMediaPeriod where the array of sample queues is
extended while the playback thread accesses the arrays.
Detecting this problem early is beneficial to avoid unexplained
exceptions later one. In most cases where this may happen (namely
TS extractors finding new tracks), it's better to ignore the new
tracks instead of failing completely. So this change adds a
warning log message and assigns a placeholder output.
Note: The same workaround already exists in HlsSampleStreamWrapper
and MediaExtractorCompat.
Issue: androidx/media#1476
#cherrypick
PiperOrigin-RevId: 646427213
The two arrays need to have the same length and the selection
must match in their nullness (unless for TYPE_NONE
renderers). Clarify this more clearly in the docs and add
new asssertions for it. This avoids that the player is failing
in obscure ways much later.
Issue: androidx/media#1473
#cherrypick
PiperOrigin-RevId: 646086833
The test is flaky because the decoding process in the renderer
depends on some timing from MediaCodec beyond our control and
the new keyframe added in the test is sometimes 'dropped' when
it arrives too late.
We can fix this by controlling the test progress a bit more
tightly: first rendering with the same current time until the
key frame is processed and then start increasing the time
until we've reached the end.
#cherrypick
PiperOrigin-RevId: 646064352
Summary:
This change aims to add a generic `CustomData` field to the `Format` class.
The intent is to allow ExoPlayer customers to add extra data to the Format class without forcing
specific data to be included, impacting customers that do not need it and would allow for the data
to be changed without requiring changes to the `Media3` codebase.
Previously we assumed that `surfaceSyncGroupV34` was always non-null on
API 34, but this isn't true in edit mode. Instead we add an explicit
null-check before accessing it. We don't need to null-check it at the
other usage site because we are already null-checking `surfaceView` (via
`instanceof` check).
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 645008049
Some cases are not handled correctly at the moment:
- Pausing during suppressed playback should not clear the
suppression state.
- Transient focus loss while paused should be reported as
a playback suppression.
Issue: androidx/media#1436
#cherrypick
PiperOrigin-RevId: 644971218
Sometimes the reason for the current state may change. If we don't
report this again, users have no way of knowing that the reason
changed.
Also adjust ExoPlayerImpl and MediaControllerImplBase accordingly.
SimpleBasePlayer already adheres to this logic.
#cherrypick
PiperOrigin-RevId: 644970236
This helps to keep the reason always together with the state it
is referring to, avoiding any side channels and making sure there
are no accidental inconsistencies.
#cherrypick
PiperOrigin-RevId: 644969317
This workaround is only applied on API 34, because the problem isn't
present on API 33 and it is fixed in the platform for API 35 onwards.
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 644729909
In the case of a legacy session app providing an error
code different to `ERROR_UNKNOWN` without an error
message, a localized fallback message is provided
instead of ignoring the error.
#cherrypick
PiperOrigin-RevId: 644704680
The Javadoc was indicating that the duration should always be set,
but it doesn't need to be set in most cases for export.
PiperOrigin-RevId: 644685827
Includes adjusting how effects are defined, to make it clearer in a
test that a given ItemConfig has effects associated with it.
PiperOrigin-RevId: 644684308
The 'player commands' returned to ExoPlayerImpl instruct the
player on how to treat the current audio focus state.
The current return value when playWhenReady==false is misleading
because it implies we are definitely not allowed to play as if
we've lost focus. Instead, we should return the actual player
command corresponding to the focus state we are in.
This has no practical effect in ExoPlayerImpl as we already
ignore the 'player command' completely when playWhenReady=false.
To facilitate this change, we also introduce a new internal
state for FOCUS_NOT_REQUESTED to distinguish it from the state
in which we lost focus.
#cherrypick
PiperOrigin-RevId: 644416586
There are a lot of tests for AudioFocusManager in isolation,
but almost none for the handling in ExoPlayer.
Add test coverage for all the common cases, including some
currently broken behavior that is indicated by TODOs.
PiperOrigin-RevId: 644319251
These calls have no effect because the VideoFrameReleaseControl of
CompositionPlayer is created with allowedJoiningTimeMs set to 0.
PiperOrigin-RevId: 644274524
This is an internal refactor with no logic changed.
There is a duplication in information and a lack of consistency around
the use of test assets in transformer androidTest. This change
refactors each asset to be defined as its own AssetInfo, with the other
relevant parts stored alongside the uri.
Once this is in place, we can consider other useful functionality, such
as having boolean flags for what tracks an asset has, helper methods
for whether an asset is local or remote, and more. This will reduce the
manual overhead necessary to use more assets in tests, and in
particular leads towards easily using new & existing assets in
parameterized tests.
PiperOrigin-RevId: 644040595
This is done by reserving some space for moov box at the start of the file and writing it there if it fits. If it doesn't fit, then it is written at the end of the file.
PiperOrigin-RevId: 643944698
This method allows customizing the maximum position when using `Player.seekToPrevious()`.
This commit also adds two new methods to `TestExoPlayerBuilder`:
- `setMaxSeekToPreviousPosition(long)`
- `getMaxSeekToPreviousPosition()`
Images are rendered into an ImageView (on top of the video shutter).
The image view is set to the images emitted by ExoPlayer's ImageOutput
and cleared when there is no longer a selected image track.
In order to keep the existing behavior of video tracks to only clear
the old output once the new first frame is rendered (avoiding short
periods of black between playlist items), we have to reorder this code
slightly to make it work for video and images. Both are treated in the
same way. If both are enabled, video takes precedence.
As the UI module only depends on the common module, we can't direcly
add the ImageOutput to ExoPlayer. This is done via reflection if
the provided Player is an ExoPlayer.
#cherrypick
PiperOrigin-RevId: 643320666
This value is used in a follow-up change to re-order SEI messages
containing CEA-6/708 data from decode order to presentation order.
PiperOrigin-RevId: 643296338
This change introduces a new class in Media3 `MediaExtractorCompat`, designed to be a drop-in replacement for platform `MediaExtractor`. While not all APIs are currently supported, the core functionality for the most common use cases of `MediaExtractor` is now available. Full API compatibility will be achieved in the future.
PiperOrigin-RevId: 643045429
This CL is a pure refactor of the existing tests, iterative changes
will be done in follow-ups.
The only logic change is having all MP4 assets have the presentaton of
height=360. The old code had some with height 480.
PiperOrigin-RevId: 643020773
Muxer never uses latest output position but always writes to
a specific location, so restoring its position does not add any
value.
PiperOrigin-RevId: 642996941
Previously, if renderFramesAutomatically = false, DefaultVideoFrameProcessor
may call onInputStreamProcessedListener after all frames have been
onOutputFrameAvailableForRendering, but before they had all been rendered and
freed.
Delay onInputStreamProcessedListener being called and subsequent DVFP
reconfiguration of effects, until all frames are rendered.
Tested using exoplayer setVideoEffects demo with playlist
PiperOrigin-RevId: 642963100
Determine `nextMediaSequence` and `nextPartIndex` based on the last `SegmentBaseHolder` instance, as it can update `mediaSequence` and `partIndex` depending on whether the HLS playlist has trailing parts or not.
Issue: androidx/media#1395
PiperOrigin-RevId: 642961141
When deselecting the single sample track and later re-selecting this
track, the current shortcuts in ProgressiveMediaPeriod don't handle
this case correctly and cause assertion failures.
In particular, this change fixes 3 issues:
1. When re-selecting the single sample track, we have cleared the
SampleQueue and need to reload the sample. The existing shortcut
should only be applied to avoid the reload when starting from a
non-zero position.
2. When de-selecting the track, ProgressiveMediaPeriod is left in
an inconsistent state where the sample queues are empty but
loadingFinished is still true. Fix this by resetting
loadingFinished to false.
3. When seeking, we avoid reloading the stream if we can keep
inside the existing samples. This logic assumes that all
remaining samples will continue to be loaded in the queue.
This condition isn't true though for single sample tracks
that have been de-selected. They appear to support the seek
inside the queue (=no seek necessary, always supported), but
still require a new load if there is no ongoing one to load
the sample. Fix this by checking this implicit assumption
(still loading, or loading finished).
PiperOrigin-RevId: 642650248
Also move the track selection header strings to the demo app
as they are only used there (except for audio, which stays in UI)
PiperOrigin-RevId: 642616037
A fatal `PlaybackException` is mapped to a legacy playback state
in state `STATE_ERROR` with error code, message and extras. A
non-fatal error sent to controllers with `MediaSession.sendError`
is synced to the legacy session by setting error code and message
and merging the extras while preserving the rest of the state in
sync with the session player.
Vice versa, a `MediaController` connected to a legacy session receives
fatal errors through `Player.onPlayerErrorChanged()` and non-fatal errors
through `MediaController.Listener.onError()`.
Error codes are mapped in `LegacyConversions`. Values of error codes
in `@SessionError.ErrorCode` come from `@PlaybackExceptino.ErrorCode`
with the exception of `@SessionError.ERROR_IO` and
`@SessionError.ERROR_UNKNOWN`. These already exist in
`@PlaybackException.ErrorCode` and are mapped accordingly to avoid
semantic duplicates.
PiperOrigin-RevId: 642595517
- Video release should check for buffer timestamp (which is renderer-offsetted), rather than the frame timestamp
- ImageRenderer should report ended after all of it's outputs are released, rather than when finished consuming its input.
Add tests for timestamp handling
PiperOrigin-RevId: 642587290
It's currently not possible to remove a previously set image output
on ExoPlayer, although the underlying renderer already supports
receiving null to clear the output. Marking the parameter as
nullable allows apps to clear it as well.
PiperOrigin-RevId: 642569081
useHdr is unused option and doesn't make sense is the dynamic range of the overlay and video must match
Also reorders and adds javadoc in line with coding conventions
PiperOrigin-RevId: 642555396
In order to do that, make the VideoSink nullable in MCVR.
We want to avoid calling VideoFrameReleaseControl.setClock directly
from MCVR when the sink is enabled. The goal is to handle all the
communication with the release control from the sink/sink provider.
PiperOrigin-RevId: 642542063
Rational for keeping field package private:
Since the overall export already very complex, by looking at the output file
its hard to know if the desired processing happened or not. Since we now
support sequences with "n" media items, its even more important to know if all
the media items were processed or not.
Although the field exposes implementation details, it seems ok as we get benefit of detailed testing.
PiperOrigin-RevId: 642337888
These are no longer needed now that the `Bundleable` interface has been
removed. Public methods are deprecated, package-private ones are
removed. Callers are migrated in both cases (except where tests
explicitly exist for the deprecated method).
PiperOrigin-RevId: 642294451
This interface is not used in the library. Callers can use the
`Bundle toBundle()` and `static Foo fromBundle(Bundle)` methods
defined directly on each type instead.
PiperOrigin-RevId: 642271609
This change adds `SessionError` and uses it in `SessionResult`
and `LibraryResult` to report errors to callers.
Constructors and factory method that used a simple `errorCode` to
construct error variants of `SessionResult` and `LibraryResult`
have been overloaded with a variant that uses a `SessionError`
instead. While these methods and constructors are supposed to be
deprecated, they aren't yet deprecated until the newly added
alternative is stabilized.
PiperOrigin-RevId: 642254336
This callback is useful for advanced use cases that care about
which Player calls are batched together. It can be implemented
by triggering this new callback every time a batch of Player
interactions from a controller finished executing.
PiperOrigin-RevId: 642189491
Previously these tests were setting the test-only `KEY_CONTROLLER`
bundle value to the prod value of
`MediaController.KEY_MEDIA_NOTIFICATION_CONTROLLER_FLAG`, which is a bit
confusing because this is intended to be used as a `Bundle` **key**
(for a boolean value), and not a value itself.
Instead this CL creates a test-only value that can be used by
`RemoteMediaSession` and related test-only friends to indicate that
something (e.g. error or extras) should only be set on the notification
controller.
This CL also changes the logic in `MediaSessionProviderService` to
avoid needing to special-case checking for this controller key.
PiperOrigin-RevId: 641939283
The previous wording suggested that `setVideoEffects()` may **only** be
called before `prepare()`, i.e. the effect cannot be changed during
playback. The intent is instead that `setVideoEffects()` must be called
once before playback in order to configure the effects pipeline, but
the effect can then be changed during playback by further calls to
`setVideoEffects()`.
Issue: androidx/media#1393
PiperOrigin-RevId: 641853629
Avoid scaling the lanczos windown function when scaling up.
When scaling up (output > input), we shouldn't scale the window
function or we risk not sampling any of the input pixels.
PiperOrigin-RevId: 641838149
Before, the listener was set in onReadyToInitializeCodec, which means
that it was reset every time a new codec was used.
We need to set the listener every time MCVR is enabled (not only the
first time), because it might have been set by another renderer.
PiperOrigin-RevId: 641825717
Before this change, the timestamps output from composition playback is offset
with the renderer offset. After this change, the offset is removed and the
timestamp behaviour converges with Transformer, that is, the timestamps of
video/images frames will follow that of the composition. For example, with a
composition of two 10-s items, clipping the first with 2s at the start, the
timestamp of the first frame in the second item, will be 8s.
PiperOrigin-RevId: 641121358
When the frame release control invalidates a buffer and returns that
the buffer must be ignored, we need to exit early before performing
additional checks that may result in method calls using the invalid
buffer.
PiperOrigin-RevId: 640555688
Ensures valid progress state is returned. Should not return NOT_STARTED
once transformer.start has been called, until export ends.
PiperOrigin-RevId: 640533805
Usages removed in this CL are:
- onProcessedStreamChange, which was already called from the VideoSink
(via VideoFrameRenderControl)
- setOutputSurface, which was also already called from the VideoSink
- setFrameRate, which this CL now sets in the VideoSink
PiperOrigin-RevId: 640530903
Removes the flakiness of
MediaItemExportTest.getProgress_unknownDuration_returnsConsistentStates
by using a longer input asset, such that ExoPlayer does not determine
the duration of the media.
PiperOrigin-RevId: 640502470
Before this CL, we were checking whether the video sink was initialized
to determine whether it should be used. In the meantime,
shouldUseVideoSink has been introduced. Use this boolean to check
whether to use the video sink as it's a clearer signal.
PiperOrigin-RevId: 640499147
Add SeparableConvolution.configure(inputSize) to allow effect configuration
depending on input dimensions.
Add LanczosResample.scaleToFit method to scale input images to fit inside
given dimensions.
PiperOrigin-RevId: 640498008
This avoids having to add AnalyticsListener and catching the `onPlayerReleased` callback.
The `Exoplayer.release()` method is blocking and one can be sure that the player is released if the call returned. However, the method is useful for UI testing and asserting that the player is released after a certain UI action, e.g. closing the activity or detaching a window.
PiperOrigin-RevId: 640114416
fragment_shader_separable_convolution_es2.glsl had optimizations that assumed
all convolution coefficients are positive. Support negative coefficients,
and add tests.
PiperOrigin-RevId: 640104741
Before this change:
The only way to customize the icons was to override the drawables, e.g.
* `exo_styled_controls_play`
* `exo_styled_controls_pause`
However, that would set the drawables globally and prevent users from customizing the icons **per** PlayerView.
After the change, it is possible to provide drawable icons in the xml layout directly via `<androidx.media3.ui.PlayerView>` and
* `app:play_icon="@drawable/...`
* `app:pause_icon="@drawable/...`
* `app:vr_icon="@drawable/...`
* `app:fullscreen_exit_icon="@drawable/...`
* `app:next_icon="@drawable/...`
Note:
Two buttons that are left out of this change are fast-forward and rewind. They are more complicated due to layout insertion and customization with seek back/forward increments in the TextView.
Issue: androidx/media#1200
PiperOrigin-RevId: 639832741
These changes are possible because getProgress is no longer a blocking
operation on transformer.
* Tests call getProgress after every looper message executed.
* Use longer media assets for getProgress tests to give more progress
intervals.
* Remove conditional assertions.
PiperOrigin-RevId: 639734368
Switch from 4-channel RGBA_16F lookup texture to 1-channel R_16F.
Do not use a bitmap when creating the lookup table texture.
Instead, fill the texture directly.
Do not manually convert 32-bit float to 16-bit. Instead, let OpenGL
libraries do this for us.
PiperOrigin-RevId: 639717235
The CMCD data was incorrectly added to the `dataSpec` of the media segment instead of the init segment.
Also relaxed the condition for playbackRate to be C.RATE_UNSET when creating an instance of CmcdData.Factory as there was nothing enforcing this check.
#minor-release
PiperOrigin-RevId: 639046080
Foreground service type `mediaPlayback` requires permission `android.permission.FOREGROUND_SERVICE_MEDIA_PLAYBACK`. The `MockMediaSessionService`, `LocalMockMediaSessionService`, `MockMediaLibraryService`
and `LocalMockMediaLibraryService` declared in the manifest are in the `mediaPlayback` type.
PiperOrigin-RevId: 639013810
AudioGraphInput.onMediaItemChanged is called on input thread. Pending
media item changes are processed on processing thread, inside calls to
getOutput().
This change allows multiple pending media item changes to be enqueued,
and processed in sequence.
PiperOrigin-RevId: 638995291
This is a relatively small change, and massively simplifies the work
needed for an app to consume Kotlin Multiplatform resources (without a
full `KmpResourceDataSource` implementation, which poses some
dependency challenges for now).
Issue: androidx/media#1405
PiperOrigin-RevId: 638991375
When running in asynchronous mode, MediaCodec will be running the CPU to signal input and output buffers being made available for use by the player. With ExoPlayer.experimentalSetDynamicSchedulingEnabled set to true, ExoPlayer will wakeup to make rendering progress when MediaCodec raises these signals. In this way, ExoPlayer work will align more closely with CPU wake-cycles.
PiperOrigin-RevId: 638962108
Currently ExoPlayer schedules its main work loop on a 10 ms interval. When renderers cannot make any more progress (ex: hardware buffers are fully written with audio data), ExoPlayer should be able to schedule the next work task further than 10ms out into the future.
Through `experimentalSetDynamicSchedulingEnabled` and these changes to `MediaCodecAudioRenderer`, ExoPlayer can use the data provided by the audio renderer to dynamically schedule its work tasks based on when it is expected that progress can be made.
PiperOrigin-RevId: 638677454
Currently ExoPlayer schedules its main work loop on a 10 ms interval. When renderers cannot make any more progress(ex: hardware buffers are fully written with audio data), ExoPlayer should be able to schedule the next work task further than 10Ms out.
Through `experimentalSetDynamicSchedulingEnabled`, ExoPlayer will dynamically schedule its work tasks based on when renderers are expected to be able to make progress.
PiperOrigin-RevId: 638676318
Both constants have the same value, but the method returning initial values for the media sequence/part uses `INDEX_UNSET`, so it makes sense to use it.
PiperOrigin-RevId: 638673282
Degammaing has been removed in cb4b2ea55c. The goldens for
TransformerHdrTest (previously TransformerSequenceEffectTestWithHdr)
were not regenerated because the test wasn't running due to its name
(fixed in e41a966237).
PiperOrigin-RevId: 638645635
Add DefaultVideosFrameProcessor experimental flag that controls
whether input Bitmaps are sampled once for a repeating sequence of
output frames with the same contents, or once for each output frame.
PiperOrigin-RevId: 637921350
Only sample from input bitmap when the input image has changed.
Introduce GainmapShaderProgram.newImmutableBitmap API that signals
input bitmap changes to GainmapShaderProgram (DefaultShaderProgram).
PiperOrigin-RevId: 637920207
This removes `throws Exception` from public methods in favour of more
specific exception types (`TimeoutException` and `PlaybackException`).
PiperOrigin-RevId: 637880546
Before this CL, externalShaderProgramInputCapacity was not reset when
the external shader program was reset (which occurs when the
InputSwitcher switches to an input with a different ColorInfo). This is
due to a regression introduced in bef3d518d2.
PiperOrigin-RevId: 637869215
Add a wait in DefaultCodec.signalEndOfInputStream when no
video encoder output has been seen. This avoids a thread synchronization problem
between writing frames to video surface, and signaling end of stream,
which was hit for video input of only one frame on some devices.
PiperOrigin-RevId: 637844690
PQ and HLG have different luminance ranges (max 10k nits and max 1k nits resp). In GL, colors work in a normalised 0 to 1 scale, so for PQ content, 1=10k nits and and for HLG content, 1=1k nits.
This cl scales and normalises PQ content appropriately so that all HDR content works in the HLG luminance range. This fixes two things
1. Conversions between HLG and PQ are "fixed" (before the output colors looked too bright or too dark depending on which way you are converting)
2. color-altering effects will be able to work consistently across HLG and PQ content
1 is tested in this cl. 2 will be tested when ultra HDR overlays are implemented, both cases have been manually tested to ensure the output looks correct on a screen.
PiperOrigin-RevId: 636851701
If subtitle-parsing-during-extraction is enabled (now defaults to on),
the 'outer' extractor class name is often
`SubtitleTranscodingExtractor`, leading to some slightly useless error
messages like:
`None of the available extractors (FragmentedMp4Extractor, Mp4Extractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, TsExtractor, MatroskaExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, AviExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor)`
PiperOrigin-RevId: 636834354
Remove redundant test logic to add file size to ExportResult because
the file size is already added to export result as part of an export
finishing.
PiperOrigin-RevId: 636499236
Add composition time offset parameter to TRUN box to
support muxing of videos containing B-frames by FragmentedMp4Muxer.
Update TRUN box version from 0 to 1 in order to manage signed
composition time offset.
PiperOrigin-RevId: 636426397
This is currently set from `Mp3Extractor.synchronizedHeader` which
gets overwritten every time we read a new frame. It seems safer to make
this defensive copy (and there will be at most one `XingFrame` instance
per-playback, so this is not prohibitively expensive).
PiperOrigin-RevId: 636181038
This change avoids a muxer deadlock when:
1. Sequence of items
2. First item has audio track that is shorter than video
3. Audio finishes, and muxer refuses to write more than 500ms of video
consecutively.
SequenceAssetLoader fails to progress to the second item. A muxer
deadlock is possible when the audio of the first item finishes,
audio end-of-stream is not propagated through AudioGraph, and muxer blocks
video, preventing SequenceAssetLoader to move to the next item in sequence.
By triggering silence generation early as soon as audio EOS is
encountered, we ensure SequenceAssetLoader can progress to the next item.
PiperOrigin-RevId: 636179966
`Info` header is used for CBR files, but in some cases not **every**
frame in these files is the same size. This change stops using the
single frame after the `Info` frame as the 'template' (and assuming all
subsequent frames are the same size/bitrate), and instead derives the
bitrate from fields in the `Info` header. This works for files which are
'almost' constant bitrate, like the one in Issue: androidx/media#1376 where every
frame is either 1044 or 1045 bytes except the one immediately after the
`Info` frame which is 104 bytes (32kbps), resulting in a wildly
incorrect duration calculation.
PiperOrigin-RevId: 636151605
This was previously only set on images because it was not ignored on
other media types. This parameter was made no-op for non-images in
7b2a1b4443.
PiperOrigin-RevId: 636078142
This change was originally made in 379cb3ba54.
It was then accidentally lost in when `Cea608Parser` was merged back
into `Cea608Decoder` in 25498b151b.
This was spotted when re-doing a similar lost change to `Cea708Decoder`,
reported in https://github.com/androidx/media/pull/1315.
See reasoning on e2847b3b80
about why this is the only 'lost' CEA-608 change.
PiperOrigin-RevId: 635803536
This change was originally made in 6f8249184b
It was then accidentally lost in when `Cea708Parser` was merged back
into `Cea708Decoder` in 51b4fa2cc8.
This is the only change made to the actual 'decoding' logic in
`Cea708Parser` between it being split from `Cea708Decoder` and merged
back in again, all the other changes in this period relate to the
implementation of the `SubtitleParser` interface, so don't need to be
preserved in `Cea708Decoder`:
51b4fa2cc8/libraries/extractor/src/main/java/androidx/media3/extractor/text/cea/Cea708Parser.java
`Cea608Parser` was also merged back into `Cea608Decoder` in
25498b151b
and so is vulnerable to the same risk of accidental loss of changes. To
be sure, I also checked the history of this file:
25498b151b/libraries/extractor/src/main/java/androidx/media3/extractor/text/cea/Cea608Parser.java
The only 'decoding logic' change there is 379cb3ba54,
which was also lost in 25498b151b.
I will send a separate change to resolve this.
PiperOrigin-RevId: 635796696
This shows ExoPlayer currently wrongly reports the duration of this
sample, because it assumes every frame is 32kbps (104 bytes) due to the
`PCUT` frame immediately after the `Info` frame.
A follow-up change will modify `Info` frame handling to resolve this
issue.
This sample was crafted using a hex editor to insert the additional
`PCUT` frame (the pattern of `null` and `x` is taken from the sample
file in Issue: androidx/media#1376, the header is modified to set the channel count
to 1 to match the rest of the file), and then update the frame count
and data size of the `Info` header to match.
Issue: androidx/media#1376
PiperOrigin-RevId: 635772837
Fragment shaders in OpenGL ES shader language aren't guaranteed
to support highp, required to correctly represent pixel coordinates
inside large images (e.g. 1920x1080).
This change moves coordinate mirroring for images out of fragment shader.
Fixes http://Issue: androidx/media#1331
PiperOrigin-RevId: 635732208
If MediaCodec allocates passes an image buffer with a cropped region,
SurfaceTexture.getTransformMatrix will cut off 2 pixels from each dimensions.
The resulting videos will appear a little stretched.
This patch inspects the SurfaceTexture transform matrix, and guesses what the
unscaled transform matrix should be.
Behind experimentalAdjustSurfaceTextureTransformationMatrix flag
PiperOrigin-RevId: 635721267
Gainmaps don't currently have an equals override, only reference equality is checked by Objects.equals(gainmap1, gainmap2). Create an equals method for gainmaps with the fields we care about to ensure we don't incur false positives in our equality checks.
PiperOrigin-RevId: 635510451
This is a fix for the fix in 319854d624. The original fix did
not reset the firstPeriodId to avoid any id clashes with future
updates. This however only works under the assumption that the
next manifest load at the next call to prepare() is exactly the
same as the current manifest. This is not true unless the call
happens very quickly (and may fail even then). Instead we should
keep the existing manifest directly as a reference so we can use
it to find the number of removed periods when we get a new manifest
at the next call to prepare().
Issue: androidx/media#1329
PiperOrigin-RevId: 634853524
This should be no-op overall and helps to disentangle the clock sync
update from the state of the manifest.
We currently check oldPeriodCount==0 to trigger the clock sync load,
which only works because the manifest happens to be null whenever
we need a new clock sync. We can decouple these concepts by directly
checking whether we have an existing elapsedRealtimeOffsetMs.
This also requires to set this value explicitly at the point where we
consider it set to the local device clock fallback when the timing
element load fails.
PiperOrigin-RevId: 634844921
This case is most likely to happen when re-preparing a multi-period
live stream after an error. The live timeline can easily move on to
new periods in the meantime, creating this type of update.
The behavior before this change has two bugs:
- The player resolves the new start position to a subsequent period
that existed in the old timeline, or ends playback if that cannot
be found. The more useful behavior is to restart playback in the
same live item if it still exists.
- MaskingMediaSource creates a pending MaskingMediaPeriod using the
old timeline and then attempts to create the real period from the
updated source. This fails because MediaSource.createPeriod is
called with a periodUid that does no longer exist at this point.
We already have logic to not override the start position and need
to extend this to also not prepare the real source.
Issue: androidx/media#1329
PiperOrigin-RevId: 634833030
For each item, AudioGraphInput now pads the input audio track with silence
to the duration given in onMediaItemChanged.
Possibly resolves Issue: androidx/media#921 .
PiperOrigin-RevId: 634753721
The two affected tests where playing until a specific
position to enable the player to read ahead. The method
pauses at exactly the target position, but then has
temporarily undetermined behavior because the playback
thread uses player.getClock().onThreadBlocked() that lets
the playback thread make progress in parallel to the test
thread. The tests were flaky because they sometimes made
so much progress that they ended playback before we could
query the updated renderer state.
This can be fixed by using
run(player).untilBackgroundThreadCondition instead, which
is guaranteed to be fully deterministic, but may not be able
to stop at exactly the desired position (which we don't
really need anyway for this test).
PiperOrigin-RevId: 634699752
The method is only allowed to be called on prepared items.
This check was currently missing and also causing the
corresponding test to be flaky in ExoPlayerTest.
PiperOrigin-RevId: 634694077
Before this change, if a playback error is thrown the test fails with a
timeout and no additional info:
```
java.util.concurrent.TimeoutException
at androidx.media3.exoplayer.e2etest.WebvttPlaybackTest.stallPlayerUntilCondition(WebvttPlaybackTest.java:361)
```
After this change, the test failure includes a much more useful stack
trace, e.g. from 0352db9a37:
```
Caused by: java.lang.IllegalStateException: Legacy decoding is disabled, can't handle text/vtt samples (expected application/x-media3-cues).
at androidx.media3.common.util.Assertions.checkState(Assertions.java:100)
at androidx.media3.exoplayer.text.TextRenderer.assertLegacyDecodingEnabledIfRequired(TextRenderer.java:587)
at androidx.media3.exoplayer.text.TextRenderer.onStreamChanged(TextRenderer.java:210)
```
PiperOrigin-RevId: 634672138
ExoPlayer sometimes calls AudioSink.playToEndOfStream before configuring
the sink. Before this CL, the composition player was failing if this
happened.
PiperOrigin-RevId: 634306592
Fix "subtitles rendered with border and no fill color" problem:
https://github.com/moneytoo/Player/issues/413
because '0' means it's an index to the palette table, not an RGBA value of 0
To override this change, and go back to parsing during rendering,
apps must make two method calls:
1. `MediaSource.Factory.experimentalParseSubtitlesDuringExtraction(false)`
2. `TextRenderer.experimentalSetLegacyDecodingEnabled(true)`
PiperOrigin-RevId: 634262798
This class is not ready for production app usage yet, so it is still
marked `@RestrictTo(LIBRARY_GROUP)` for now. Apps can experiment with it
in a non-prod context by suppressing the associated lint error.
* Issue: androidx/media#1014
* Issue: androidx/media#1185
* Issue: androidx/media#816
PiperOrigin-RevId: 633921353
The test currently resets the time too far in the past and then has
to run through ~30000 additional iterations of doSomeWork to reach
the end, sometimes triggering the test timeout.
Fix it by resetting the time to the intended start position when
transitioning items.
PiperOrigin-RevId: 633918706
Also make one class truly package-private and keep the comment instead.
This comment should only appear on elements with default (package-private) visibility.
PiperOrigin-RevId: 633911914
This annotation is only needed on public classes.
This change also removes the `/* package */` comment from some `public`
classes.
PiperOrigin-RevId: 633864544
This means the content source is 'prepared' instantly with a
placeholder, enabling all further preparation steps (e.g. loading
preroll ads) while the actual content is still preparing. This
improvement can speed up the start time for prerolls in manifest-based
content that doesn't have a zero-time preparation step like progressive
media.
Issue: androidx/media#1358
PiperOrigin-RevId: 633640746
This change resets the error in the platform error state immediately
to make sure that the custom error is reflected only very briefly
and then gets back to the playback state that actually reflects the
player state.
Issue: androidx/media#543
PiperOrigin-RevId: 633626180
This treats heic as a separate mimetype to heif (even though heic files are a subset of heif files). This is in line with other platform classes like android.content.ContentResolver
https://developer.android.com/media/platform/supported-formats#image-formats was updated to include avif support or API level 34, so added this MimeType as well and updated our associated util.
solves Issue: androidx/media#1373
PiperOrigin-RevId: 633616214
This allows apps to better detect when the platform
reclaims a codec. This requires adding the error code
to MediaCodecDecoderException.
PiperOrigin-RevId: 633588914
Add ctts box implementation to handle muxing B-frame videos.
Add method convertPresentationTimestampsToCompositionOffset to
provide sample offsets. Return empty ctts box in case of video
does not contain B-frame. Add ctts box to MoovStructure to handle
muxing the video containing B-frames.
PiperOrigin-RevId: 633537106
https://truth.dev/faq#java8
Also use this change to remove most test usages of
`Lists.transform(...)` and replace them with `.stream().map(...)`.
PiperOrigin-RevId: 633523904
