* Add `setOutputStreamOffsetUs(long)` method in `AudioSink`.
* Add private methods `setOutputStreamOffsetUs(long)` method in `MediaCodecRenderer` and `DecoderAudioRenderer`.
* Add protected method `onOutputStreamOffsetUs(long)` method in `MediaCodecRenderer`, in which:
* `MediaCodecRenderer` itself will be no-op for this method.
* `MediaCodecAudioRenderer` will propagate this value to its `audioSink`.
* Add logics in `DecoderAudioRenderer` to calculate `outputStreamOffsetUs`.
PiperOrigin-RevId: 479265429
(cherry picked from commit 5bff862374)
The JavaDoc of RequestMetadata should point to the media3 controller,
not the platform one.
PiperOrigin-RevId: 479047924
(cherry picked from commit b70258e43d)
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
(cherry picked from commit 139a6e8d31)
Assert that tone mapping is applied when an HDR edit cannot be HDR, but is successfully tone mapped. Meanwhile, assert that fallback, which is applied after codec configuration (which throws the "Tone-mapping requested but not supported by the decoder" error) is not applied when that error is called.
PiperOrigin-RevId: 478762951
(cherry picked from commit 253486d4af)
When a media service currently produces multiple media sessions, the notification of the second session overwrites the notification of the first one, because all sessions use the same notification ID. When we use different notification IDs for different sessions, multiple media notifications can be up at the same time, which means that they can both be controlled at the same time.
PiperOrigin-RevId: 478709069
(cherry picked from commit 7783c6e4f7)
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
(cherry picked from commit de82a2be33)
Rename test files to avoid substrings that can be implied by the directory name,
like "Transformation" and "Test"
No functional changes. Renaming-only.
PiperOrigin-RevId: 477724724
(cherry picked from commit 62b95a7190)
One of the tests in MediaBrowserListenerTest caused the remote
browser service to crash and then just timed out. As this asserts
nothing useful besides checking that the timeout method is working,
we can remove the test.
Crashing the remote browser service had the side effect of letting
subsequent tests in the same class fail because the previous session
was never released and was still present in the static MediaSession
SESSION_ID_TO_SESSION_MAP instance, which prevented the creation
of new sessions with the same id. This is only an issue in test
runs because a real process would also lose its static variables
when it crashes.
PiperOrigin-RevId: 476905337
(cherry picked from commit d2887d5237)
`PlaybackStateCompat.toKeyCode(command)` was replaced by our
own implementation of `toKeyCode()`. The legacy implementation used PLAY and PAUSE, while the new implementation uses PLAY_PAUSE. This made `pause` a pending intent that attempt to start the service in the foreground, but `service.startForeground()` won't be called in `MediaNotificationManager.updateNotificationInternal` when paused.
PiperOrigin-RevId: 476895752
(cherry picked from commit acd9e581c4)
Calling maybeUpdateLegacyErrorState potentially creates a new legacy playback
state which involves calling player methods. This change makes sure that the call
sites of `maybeUpdateLegacyErrorState` are called on the app thread as enforced by
the library.
PiperOrigin-RevId: 476406282
(cherry picked from commit 74124f48ea)
This allows to access the associated functionality of AudioTrack and
fills a feature gap to MediaPlayer, which has a similar method.
Issue: androidx/media#135
PiperOrigin-RevId: 476398964
(cherry picked from commit a069ebda47)
* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.
PiperOrigin-RevId: 476388021
(cherry picked from commit 44b9aec0b9)
If the sample type is dolby vision and the following conditions match
a)There is a supported alternative codec mimetype
b)Display does not support Dolby Vision
Then getDecoderInfos will return the alternative types.
Issue: google/ExoPlayer#9794
PiperOrigin-RevId: 476356223
(cherry picked from commit ed79f4696f)
* Transform the intermediate color space to linear SDR by applying the SMPTE 170M EOTF and OETF.
* Use linear colors for the color filter pixel tests and update all golden bitmaps.
PiperOrigin-RevId: 476124592
(cherry picked from commit 3433758c3b)
The ClearKey CDM will attach an 'invalid' URL in `KeyRequest` objects,
when the documentation states this should be an empty string if a
default URL is not known.
#minor-release
PiperOrigin-RevId: 476113513
(cherry picked from commit 715c948004)
* Add docs for the public constructor for consistency with all the
other frame processors.
PiperOrigin-RevId: 473726586
(cherry picked from commit 7a460fa3bd)
*** Original commit ***
Handle int instead of byte in SSIM.
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
***
PiperOrigin-RevId: 473259446
(cherry picked from commit d188babd2d)
The value of pixels are converted to integers at the point of use,
move this logic to the initialisation step.
This is a prerequisite step for testing SSIM calculation, which
will lead on to some SSIM improvements being verifiable.
Tested manually and SSIM values match for the same video
before and after this change.
PiperOrigin-RevId: 473231779
(cherry picked from commit 3d5ddf0c42)
Test that HDR editing succeeds on devices supporting HDR editing, tone maps on
devices supporting tone mapping, and throws exceptions on all other devices.
Also, only restrict HDR editing and tone mapping support to API 31+ only when
transcoding, not for all transformations.
PiperOrigin-RevId: 472958965
(cherry picked from commit 0d8fd3d4fc)
The exception fires when intent resolution fails to find a service which declares an appropriate intent-filter. The existing message is confusing; it's trying to say that the service couldn't be found but the double negative renders it incorrect.
#cleanup
#minor-release
PiperOrigin-RevId: 472736740
(cherry picked from commit 15d3d74e16)
If the back buffer is using too much memory, there is a risk
playback could get stuck because LoadControl refuses to load
further data. This eventually results in a stuck-buffering
playback error.
We can detect this case, clear the back buffer and then ask
the LoadControl again to avoid failing playback in such a case.
PiperOrigin-RevId: 472679797
(cherry picked from commit 310e0fec5c)
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
(cherry picked from commit 0896c4dd36)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (2 times)
* This catch block catches an exception and re-throws another, but swallows the caught exception rather than setting it as a cause. This can make debugging harder.
(see http://go/bugpattern/UnusedException)
* This comment contains Javadoc or HTML tags, but isn't started with a double asterisk (/**); is it meant to be Javadoc?
(see http://go/bugpattern/AlmostJavadoc)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472255768
(cherry picked from commit 3a2e0d3717)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472254253
(cherry picked from commit 573ad66f2f)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 472252461
(cherry picked from commit 83485bc509)
The assertion asserts against a `Period` and an `AdPlaybackState` which actually
asserts against a resolved ad which is what `ExoPlayerImplInternal` does later and
what gives us a `SEEK_ADJUSTMENT`. However, this assertion is not required at the
moment of masking, because we are sure that the resolved seek results in a content
period and never an ad period.
#minor-release
Issue: androidx/media#122
PiperOrigin-RevId: 471827072
(cherry picked from commit 73f86682e9)
shouldPassthrough's internal checks seem to be check whether we should *not*
pass through, which seemed a bit like a confusing double-negative to me.
shouldTranscode is slightly more clear, by instead returning true when we do
want to transcode.
No functional changes intended.
PiperOrigin-RevId: 471753771
(cherry picked from commit 7085c2fa6e)
3b0d2c1586 made `shouldPassthrough` always return false for `enableHdrVideoEditing`:
>We force using `FrameEditor` (no passthrough) to avoid the need to select another edit operation, and use the new shaders. The `EGLContext` and `EGLSurface` also need to be set up differently for this path.
However, this was introduced before the `videoNeedsEncoding` setting was introduced in 3f615040c0. That setting should apply to HDR videos as much as SDR videos.
PiperOrigin-RevId: 471569853
(cherry picked from commit bc88f8be54)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (3 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471198016
(cherry picked from commit 6d3cc01d79)
In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.
PiperOrigin-RevId: 471037733
(cherry picked from commit 69714e5f8e)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment) (19 times)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 471022923
(cherry picked from commit b48ca6e040)
* Non-standard parameter comment; prefer `/* paramName= */ arg`
(see http://go/bugpattern/ParameterComment)
This CL looks good? Just LGTM and Approve it!
This CL doesn’t look good? This is what you can do:
* Revert this CL, by replying "REVERT: <provide reason>"
* File a bug under go/error-prone-bug for category ErrorProneStyle if there's an issue with the CL content.
* File a bug under go/rosie-bug if there's an issue with how the CL was managed.
* Revert this CL and not get a CL that cleans up these paths in the future by
replying "BLOCKLIST: <provide reason>". This is not reversible! We recommend to
opt out the respective paths in your CL Robot configuration instead:
go/clrobot-opt-out.
This CL was generated by CL Robot - a tool that cleans up code findings
(go/clrobot). The affected code paths have been enabled for CL Robot in //depot/google3/java/com/google/android/libraries/media/METADATA which is reachable following include_presubmits from //depot/google3/third_party/java_src/android_libs/media/METADATA.
Anything wrong with the signup? File a bug at go/clrobot-bug.
#codehealth
Tested:
Local presubmit tests passed.
PiperOrigin-RevId: 470953422
(cherry picked from commit 52d32be8df)
TL;DR: we should check if there are new frames available to queue to the
ExternalTextureProcessor before actually queueing a frame.
The overall flow on the external texture processor:
- `SurfaceTexture.onFrameAvailable` is called on `ExtTexMgr`, and
- it calls `updateTexImage()`, and sets `frame`
- it calls `maybeQueueFrameToExtTexProc()`
- the frame is queued to `ExtTexProc` if `frame` is set
- From `ExtTexProc.queueInputFrame()`:
- notifies the `frameProcessorListener` of available frame
- notifies the `inputListener` of `onReadyToAcceptInputFrame`
- (`ExtTexMgr` is the listener), it calls `maybeQueueFrameToExtTexProc()`
again
-- Parallelly --
- `ExtTexProc` calls `inputListener.onInputFrameProcessed`, when the frame is
released
- (`ExtTexMgr` is the listener), sets `frame` to `null`
*Problem*
This logic relies on `frame` to be cleared at the right time.
In transformer, it's OK b/c `ExtTexProc` release the frame immediately in
`queueInputFrame()` and calls `onInputFrameProcessed` which also reset `frame`
But in previewing, the frame is not released for a while, up to 10 ms.
In this case, `frame` will not reset in this 10 ms, and
`maybeQueueFrameToExtTexProc()` is repeatedly queueing the same input frame.
PiperOrigin-RevId: 470211620
(cherry picked from commit 91709831ed)
Native multidex can only be used for binaries with minSdkVersion of 21 or higher, but minSdkVersion was specified to 16.
PiperOrigin-RevId: 470003836
(cherry picked from commit 5b3f320230)
Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.
Also, swap the OETF and EOTF in shaders, as they were used incorrectly before
Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.
PiperOrigin-RevId: 469736067
(cherry picked from commit 2ad07e88ee)
Upstream timestamps from the decoder are also in microseconds,
so using microseconds here is consistent with that.
PiperOrigin-RevId: 468659099
(cherry picked from commit 0b1c540ff9)
Remove the manual overwriting of Note ON events that have 0 velocity with Note OFF. JSyn handles this already.
- The implementation of "running status" means that the amount of bytes read from the file differ from the size of the sample that ends up in the decoder. The decoder sample contains the applied running status (status of previous event), which the file bytes don't contain.
PiperOrigin-RevId: 468537659
(cherry picked from commit 30257c767b)
Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.
More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.
PiperOrigin-RevId: 468473072
(cherry picked from commit a5d7fdcab5)
Manually tested using transformer demo HLG videos. Before this CL, RGB values after the YUV to RGB conversion reached up to 1.025. After this CL, RGB values correctly clamp at 1.0.
PiperOrigin-RevId: 468426092
(cherry picked from commit 244d38cf0e)
FrameProcessingTaskExecutor should be released on error.
There can be a delay until this happens, so
FrameProcessingTaskExecutor will cancel any pending tasks
and drop new tasks until it is released.
PiperOrigin-RevId: 468171820
(cherry picked from commit 0c961a7abd)
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
(cherry picked from commit 59895646e0)
This is needed as a pre-requisite for allowing MCVR to control
FrameProcessor frame release for previewing.
Submitting a high-priority task is conceptually different from
posting at the front of a single queue of tasks, as the high-priority
tasks are executed in FIFO order among themselves. This will ensure
that frame release tasks submitted in close succession are executed
in the order they are submitted but before any lower priority tasks.
PiperOrigin-RevId: 467675137
(cherry picked from commit 59be732230)
Increase the estimated max sample size for HEVC by 2x, and set a minimum
size of 2MB. The 2MB will be applied for resolutions up to 1080p, after
which the new calculation takes effect. This is in par with the
platform's HEVC software decoder.
PiperOrigin-RevId: 467641494
(cherry picked from commit b83b16eba7)
The specified CMake version doesn't work with the latest
Android Studio releases. Updating to a more recent version
fixes the problem.
Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467634063
(cherry picked from commit 9e1d4f6fd6)
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
(cherry picked from commit 43ede97d2f)
When the player finishes playback and reaches the STATE_ENDED,
the notification remains visible with a pause button and the
service is kept in the foreground. This is a bug.
With this change, when the player reaches the STATE_ENDED, the
service is stopped from the foreground and a notification is shown
with a play button. If the play icon is tapped, the player will restart
playback of the last played item. Playing the last played item again
is the existing behavior when play/pause commands are received from
the legacy MediaSession (e.g. BT headset buttons).
#minor-release
Issue: google/ExoPlayer#112
PiperOrigin-RevId: 467231509
(cherry picked from commit 7a7e1eb23b)
* Rename all Rgba instances to Rgb.
* Remove alpha value from the RGBA Matrices and apply the 4x4 matrix
only to the R, G, B channels.
* Restore the alpha from the input unchanged.
PiperOrigin-RevId: 467208888
(cherry picked from commit 8760ee48b9)
This change adds ExternalTextureManager which implements
InputListener to only queue input frames to the
ExternalTextureProcessor when it is ready to accept an input
frame. This replaces the old retry-logic in GlEffectsFrameProcessor.
Before this change, the retrying in GlEffectFrameProcessor wasted
CPU time if input becomes available faster than the
ExternalTextureProcessor can process it.
PiperOrigin-RevId: 467177659
(cherry picked from commit d7bf1ed2d7)
From NDK 23.1.7779620 and above, the arm64-v8a ABI needs additional
build flags to correctly link the ffmpeg libraries.
Issue: google/ExoPlayer#9933
PiperOrigin-RevId: 467161973
(cherry picked from commit 5874327e5d)
In some cases, the IMA SDK fails to call the expected loadAd
event to load the next ad to play. This is (potentially) the
only remaining case where playback can get stuck due to missing
calls from IMA as the player doesn't even have a MediaSource at
this stage and is only waiting for IMA to provide the ad URL.
We can reuse the existing adPreloadTimeoutMs that was added for
a similar purpose (when preloading the first ad in the group).
The JavaDoc matches this purpose as well and the default timeout
is appropriate since we expect to get the loadAd call immediately.
Issue: google/ExoPlayer#10510
PiperOrigin-RevId: 466953617
(cherry picked from commit b125d45a63)
createSupportedTransformationRequest is more accurate than
createFallbackTransformationRequest, as a TransformationRequest will be returned
regardless of whether any fallback is applied.
PiperOrigin-RevId: 466641277
(cherry picked from commit c5a5364673)
This change adds a new method onReadyToAcceptInputFrame to
GlTextureProcesssor.InputListener and changes maybeQueueInputFrame
to queueInputFrame, removing the boolean return value.
This avoids the re-trying in ChainingGlTextureProcessorListener
by allowing it to only feed frames from the producing to the consuming
GlTextureProcessor when there is capacity.
MediaPipeProcessor still needs re-trying when processing isn't 1:1.
PiperOrigin-RevId: 466626369
(cherry picked from commit 97e6a86d2b)
Previously, this feature interpreted SDR signals as HDR when called. Now, only HDR
streams are interpreted as HDR, so the javadoc should be updated. Not yet removing
this method, as there are still some loose ends to finish up (ex. PQ support, e2e
tests).
PiperOrigin-RevId: 466425738
(cherry picked from commit 05fcda510a)
While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.
Therefore, it's more specific to mention just that the transfer is HDR.
PiperOrigin-RevId: 466316960
(cherry picked from commit 35161c7489)
This simplifies ChainingGlTextureProcessor as it now only connects a
consuming and a producing GlTextureProcessor rather than a previous,
current, and next GlTextureProcessor.
Also use default no-op implementations of the listeners in
SingleFrameGlTextureProcessor and MediaPipeProcessor to avoid
null-checks.
PiperOrigin-RevId: 466301642
(cherry picked from commit 7dc05edbab)
This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.
No functional change intended in this CL.
PiperOrigin-RevId: 466070764
(cherry picked from commit 536d42c865)
In the case where this check fails, the downstream frame processor chain won't be able to handle the incoming (SDR) data anyway as we've already set it up for HDR.
PiperOrigin-RevId: 465584814
(cherry picked from commit 2bd1a93d27)
`requestCalculateSsim` more clearly represents the intention of the caller.
Also rephrase the javadoc to simplify it and make it more precise.
PiperOrigin-RevId: 465575578
(cherry picked from commit 2eb59fa1af)
* Add RgbaMatrix interface implementation.
* Add Builder class for easy adjustments.
* Adjust existing RgbaMatrixPixelTests to use new RgbAdjustment class.
PiperOrigin-RevId: 465545429
(cherry picked from commit a76dbfd363)
Adds a new event to AudioOffloadListener to get the offload state of the track, which indicates when software decoding is taking place.
PiperOrigin-RevId: 465264362
(cherry picked from commit 7893531888)
Avoids disabling Offload on a write error, and instead relies on this being disabled on the AudioTrack init. It will no longer recover by disabling offload.
PiperOrigin-RevId: 465248917
(cherry picked from commit a10af8ecda)
Format.NO_VALUE is a placeholder value for an invalid @C.ColorTransfer, used
for example when the decoder doesn't support this transfer function.
When encountering this invalid value, interpret this as COLOR_TRANSFER_SDR.
Confirmed locally that an exception is thrown when transcoding on p4head, and no exception is thrown when transcoding with this CL.
PiperOrigin-RevId: 464135080
(cherry picked from commit 687a50e9b3)
This will allow effects preview in ExoPlayer to use the
Effect and FrameProcessor interface (and the interfaces
they depend on) without depending on transformer or the
future effects module.
PiperOrigin-RevId: 464060047
(cherry picked from commit 480c129c54)
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
(cherry picked from commit 65a2a3a0a0)
Despite unregistering the callback and clearing pending Handler
messages, the callback may still receive pending calls if they
are already triggered by the AudioTrack. Instead of asserting
that the track is correct, we should gracefully ignore stale
events.
PiperOrigin-RevId: 463851393
(cherry picked from commit e331bf2c53)
Once a controller bound to a MediaSessionService unbinds, this service
may be destroyed immediately if this was the last bound controller and
the service isn't started in the foreground.
At the time of releasing the controller, there may still be pending
commands that need to be handled by the session service. These commands
may cause the session service to post a foreground notification to
keep it alive. So to avoid the destruction of the service while these
commands are still handled, we need to keep the controller bound.
We also add a timeout in case the session tasks are never completed
by the session implementation. In case the controller is destroyed,
the unbinding happens automatically by the system.
PiperOrigin-RevId: 463802220
(cherry picked from commit ac42b593cc)
TransformationException error codes were previously tied to OpenGL
but other FrameProcessor implementations are possible. So this CL
renames the error codes.
Also, remove GL_INIT_FAILED error code, as FrameProcessor
implemenations may initialize resources on a background thread
after the factory method returns, so it's not obvious how to
distinguish between initialization failures and processing failures.
PiperOrigin-RevId: 463704902
(cherry picked from commit 0f96d8615d)
Both are used in the public FrameProcessor interface, so they
should be public too.
PiperOrigin-RevId: 463454859
(cherry picked from commit b1b9ba825f)
Just a misc nit, since I found the name a bit confusing, and figured
findEncoderWithClosestSupportedFormat might be more descriptive.
PiperOrigin-RevId: 463433646
(cherry picked from commit a7a17dc2bb)
Extract a FrameProcessor.Factory interface from GlEffectsFrameProcessor
and allow it to be customized using a setter on Transformer.Builder.
PiperOrigin-RevId: 463433438
(cherry picked from commit 22822d8e19)
Size requires API 21. Using Pair instead will allow effects to be
used from API 18 during previewing once they are moved out of
transformer.
PiperOrigin-RevId: 463206474
(cherry picked from commit 4adf199398)
This is needed for applying effects to a playlist.
The effects are applied based on the presentation time of the
frame in its corresponding media item and the offset is added
back before encoding.
Each time the offset changes, end of input stream is signalled
to the texture processors. This is needed because the texture
processors can expect monotonically increasing timestamp within
the same input stream but when the offset changes, the timstamps
jump back to 0.
PiperOrigin-RevId: 462714966
(cherry picked from commit 30e5bc9837)
The DefaultMediaNotificationProvider caches the last loaded artwork
bitmap so that the bitmap isn't loaded again when the notification is
updated, e.g., the player is transiting from playing to paused. However,
loading bitmap requests for bitmaps that are already being loaded are
not suppressed. For example, if the notification is updated while the
artwork is still downloading, the same artwork might be downloaded
multiple times.
This change suppresses a bitmap load request if the same artwork is
still being loaded, to avoid additional artwork downloads.
#minor-release
PiperOrigin-RevId: 462572221
(cherry picked from commit dd2c16bc45)
It's always safe to ignore the result of these methods, because the
caller already has a reference to the returned value.
PiperOrigin-RevId: 462388947
(cherry picked from commit 2deb435625)
We currently clear all pending messages, including the one that flushes
pending commands to the MediaSession. To ensure all commands that have
been called before controller.release() are still sent, we can manually
trigger the flush message from the release call.
Related to handling the final flush because disconnecting the controller,
MediaSessionStub didn't post the removal of the controller to the
session thread, creating a race condition between removing the controller
and actually handling the flush.
Issue: androidx/media#99
PiperOrigin-RevId: 462342860
(cherry picked from commit ee209690cb)
These constructors are currently very intertwined, passing `this`
references from the constructor of one to the constructor of another
before the first constructor is complete (and so the `this` reference
isn't really valid yet).
This change uses checker framework `@UnderInitialization` and
`@NotOnlyInitialized` annotations to make it more clear that the
references are not available yet. For the one 'direct' access needed
in the second constructor (calling `getApplicationLooper()`) we now
pass the `applicationLooper` directly alongside (to avoid needing to
dereference the reference 'too early').
This change also ensures that where a class hierarchy has a
'dependent' class hierarchy, the 'subclass' instance is always used
(by both subclass and superclass) without casting or manually hiding
the superclass field, by defining an overridable `getFoo()` method
instead and always using it.
#minor-release
PiperOrigin-RevId: 462335043
(cherry picked from commit 287c757944)
This allows us to use BT.2020 RGB linear for intermediate shaders, which also
allows us to re-enable PeriodicVignetteProcessor, which should work properly in
linear color-spaces.
Manually tested by adding a GlEffectsWrapper, and confirming that HLG HDR editing still looks correct.
PiperOrigin-RevId: 462265821
(cherry picked from commit 2f977eeec9)
"seq" is not a well-defined abbreviation and the value is
also an integer, so sequenceNumber is better than just sequence.
PiperOrigin-RevId: 462129581
(cherry picked from commit 4a4a74edff)
Add a Builder to constructor DefaultMediaNotificationProvider. The
Builder can also set the provider's:
- notification ID
- notification channel ID
- notification channel name
The change adds an API for apps to set the small icon in notifications.
#minor-release
Issue: androidx/media#104
PiperOrigin-RevId: 462111536
(cherry picked from commit 436ff6d86a)
Some commands are run asynchronously and subsequent commands need
to wait until the previous one finished. This can be supported
by returning a Future for each command and using the existing
command execution logic to wait for each Future to complete.
As some MediaSessionStub code is now executed delayed to when it
was originally created, we also need to check if the session is
not released before triggering any actions or sending result codes.
Issue: androidx/media#85
PiperOrigin-RevId: 462101136
(cherry picked from commit 7cb7636ed9)
The commands currently use a task and a postTask that are chained
together manually. In some cases, e.g. when adding MediaItems,
the postTask is already a chain of commands in itself.
To allow using the entire command handling as a single task
(for simplified queueing), we can change the implementation to
always create a single task. If multiple subtasks need to be
chained together, we can do that by wrapping the method calls.
In case a task is asynchronous, we can also use Futures to
chain them together.
Overall, this is just a refactoring and changes no logic.
Issue: androidx/media#85
PiperOrigin-RevId: 462085724
(cherry picked from commit 45f1f5b378)
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
(cherry picked from commit f9eec0c0e8)
Otherwise, invalid ColorInfo instances generated using faulty
MediaFormat#getInteger values could cause exceptions.
Confirmed that b/239435670 reproduces without this CL, and does not reproduce
with this CL.
PiperOrigin-RevId: 461862191
(cherry picked from commit 87198fe7f8)
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
(cherry picked from commit e1fde5d530)
Some commands may be asynchronous and subsequent commands need to
wait for them to complete before running. This change updates the
queue to use (and listen to) Futures instead of calling Runnables
directly. The commands are currently still added as Runanbles
though, so this change is a no-op.
Also moves the permission check in MediaSessionImpl to before
queueing the command because the permission should be check at
the time of calling the method.
When executing the comamnds in the queue, we need to be careful
to avoid recursion in the same thread (which happens when both
the Future is immediate and running on the correct thread already).
To avoid recursion, we detect this case and loop the commands
instead.
Issue: androidx/media#85
PiperOrigin-RevId: 461827264
(cherry picked from commit dee80788e4)
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
(cherry picked from commit ba9c9bb964)
This may happen when a containers' color transfer incorrectly does not match
the video's color transfer.
An example of a file with such a mismatch is the current Transformer demo HDR10
sample file.
Manually tested by confirming that no errors are emitted for SDR and HLG sample
files, and that errors are emitted for our incorrect HDR10 sample file.
PiperOrigin-RevId: 461583532
(cherry picked from commit 9f7a159bc4)
