Partially roll forward of 5c29abbbf4, and adds some extra logic
Changes to the original CL
The original logic (a66f08ba97) fails in the following case:
> This is only seem on emulators.
- EOS is sent to ExtTexMgr
- The timer starts
- One frame arrives on SurfaceTexture, reset the timer
- The frame is sent for processing, now `availablFrames == 0`
- One frame arrives on Surface, reset the timer
- The frame is kept on SurfaceTexture for the downstream shader doesn't have
capacity, `availablFrames == 1`
- Timer times out as the downstream processor doesn't report being able to take
another frame.
- Although there's a frame available on the SurfaceTexture
This is solved by having the force EOS logic clear all the frames that the
SurfaceTexture holds. This also ensures the first frame dequeued from the next
stream isn't from the previous stream.
PiperOrigin-RevId: 540023359
Currently, the implementation of `MediaControllerImplBase` differs from `ExoPlayerImpl`. The listeners of the former are notified of player error changes only in `onPlayerInfoChanged` and not `updatePlayerInfo` (masking method). Whereas `ExoPlayerImpl` has one unified method - `updatePlaybackInfo` - which sends the events to all the available listeners.
This change fixes the lack of 2 particular callbacks - `onPlayerErrorChanged` and `onPlayerError`, however, there might be more differences. Ideally, there should be a unified method for oldPlayerInfo/newPlayerInfo comparison-update-notify-listeners flow.
Issue: androidx/media#449
#minor-release
PiperOrigin-RevId: 539961618
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
*** Original commit ***
Add a timer to end a video stream prematurely in ExtTexMgr
***
This has been submitting for more than 1.5hrs. "This presubmit is running slowly because you have been throttled by Build Queue due to using too much of your Product Area's quota."
adding NO_SQ as this is a pure rollback
PiperOrigin-RevId: 539135970
Add `HlsMediaSource.Factory.setTimestampAdjusterInitializationTimeoutMs(long)` to set the timeout for the loading thread to wait for the `TimestampAdjuster` to initialize. If the initialization doesn't complete before the timeout, a `PlaybackException` is thrown to avoid the playback endless stalling. The timeout is set to zero by default.
This can avoid HLS playback endlessly stalls when manifest has missing discontinuities. According to the HLS spec, all variants and renditions have discontinuities at the same points in time. If not, the one with discontinuities will have a new `TimestampAdjuster` not shared by the others. When the loading thread of that variant is waiting for the other threads to initialize the timestamp and hits the timeout, the playback will stall.
Issue: androidx/media#323
#minor-release
PiperOrigin-RevId: 539108886
This change addresses the case when the user joins the live stream
on an ad period but the metadata for the ad period is not emitted.
This results in inserting a partial ad group.
In this case the ad group duration is longer than the partial ad
group. If now the partial ad group ends at the period before the
last period of the window (unknown duration), the splitting algorithm
didn't recognize that the ad group already ended and made the last
period wrongly an ad period.
This change handles this edge case by counting the mapped ads in
the partial ad group to detect this situation and stops splitting.
#minor-release
PiperOrigin-RevId: 539102785
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
When the source is prepared again after stop, the period uid
is calculated by subtracting the `firstPeriodId` from the
period uid that is passed in to `createPeriod`. When this
happens after stop, the uid from the old period uid that
is still stored and has the value of the last played uid.
Hence the `firstPeriodId` must not be reset when released.
Issue: google/ExoPlayer#10838
PiperOrigin-RevId: 539028570
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
This change is for Android 12 and below, where the buttons are derived from the actions added with the notification. From Android 13 (https://developer.android.com/about/versions/13/behavior-changes-13#playback-controls), the system derives media controls from `PlaybackState` actions.
When adding the actions onto the notification, the logic will iterate all the command buttons. The `COMMAND_KEY_CONPACT_VIEW_INDEX` extra will be checked for each button. If that extra is set for the three buttons on the compact view, then the customized buttons and their order will be used. Otherwise, the compact view will be "seekPrev" (if any), "play/pause" (if any), "seekNext" (if any) buttons (in such order).
Issue: androidx/media#410
PiperOrigin-RevId: 538797874
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
The sample timestamp carried by the emsg box can have a significant delta when comparing to the earliest presentation timestamp of the segment. Using this timestamp to intialize the timestamp offset in TimestampAdjuster will cause the media sample to have a wrong adjusted timestamp. So we should defer adjusting the metadata sample timestamp until the TimestampAdjuster is initialized with a real media sample.
PiperOrigin-RevId: 538172841
When initiated by MediaController, it should be possible for `MediaSession` to pass `MediaItems` to the `Player` if they have `LocalConfiguration`. In such case, it is not required to override `MediaSession.Callback.onAddMediaItems`, because the new current default implementation will handle it.
However, in other cases, MediaItem.toBundle() will continue to strip the LocalConfiguration information.
Issue: androidx/media#282
#minor-release
PiperOrigin-RevId: 537993460
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
`outputSurfaceInfoChanged` is not reset when `defaultShaderProgram` is null.
That is, on the first time `ensureConfigured()` is called with output size
changed, `outputSurfaceInfoChanged` is not set to false after creating the
`defaultShaderProgram`, and `defaultShaderProgram` will be created again on the
second time `ensureConfigured()` is called.
PiperOrigin-RevId: 537870404
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
This is a breaking change, but the alternatives seem either equally
breaking or worse, since the only way to make this non-breaking is
to add the `Throwable` overloads as `default` methods. It's then
unclear how we would ever migrate to these being the 'only' methods
or whether we'd have to keep both forms forever (which results in
duplication in the `Logger` implementations).
The clean break here also makes it clear that the `message` parameter
of `Log.Logger.{d,i,w,w}()` no longer automatically includes any info
from the `Throwable` passed to the static `Log.{d,i,w,e}() methods.
----
This CL also cleans up the javadoc on the static `Log.{d,w,i,e}` methods
since they no longer necessarily call straight through to the
corresponding `android.util.Log` methods (and haven't since <unknown commit>
and Issue: google/ExoPlayer#10185).
PiperOrigin-RevId: 537817974
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
In some cases the codec selected for decoding has a different MIME type than
the media. In thoses cases Transformer continued to use the media's MIME type
and that caused codec configuration failures.
Removed `EncoderUtil.findCodecForFormat()` as we stopped using the method it
uses for finding a codec. Plus, the method is only used in the test.
See also `MediaCodecUtil.getALternativeCodecMimeType()`.
PiperOrigin-RevId: 536683663
Otherwise, texture output errors out if video decoding decodes faster than audio,
hitting the end of the file, while audio is still in the middle of the file.
PiperOrigin-RevId: 536679568
This future.get() duplicates the wait done in
singleThreadExecutorService.awaitTermination(). If awaitTermination times out, this future.get() would also result in unnecessary blocking.
PiperOrigin-RevId: 536442153
*** Original commit ***
ExoPlayer: Add setVideoFrameProcessorFactory().
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
***
PiperOrigin-RevId: 536391597
Deprecated field `MediaItem.playbackProperties` remains for backwards compatibility, but its type is changed from `MediaItem.PlaybackProperties` to `MediaItem.LocalConfiguration`. The private `MediaItem` constructor will now also take in a `LocalConfiguration` argument instead.
PiperOrigin-RevId: 535648420
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
Also, document that texture output disables manual frame release.
In the past, texture output would lead to surface output methods throwing. Now,
they're simply no-ops instead.
PiperOrigin-RevId: 534894168
When the video renderer is disabled, the video size is set to 0/0
and sent to listeners. The `PlayerView` potentially still has the last frame
displayed when the player is stopped or an error occurs. This may have the
effect that the frame is displayed distorted.
Not changing the aspect ratio when the video size arrives when the player is IDLE
avoids the problem. In the case when playback starts again and the renderes is
enabled, another video size is sent to the listener.
#minor-release
PiperOrigin-RevId: 534860889
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Tentative/experimental value to reduce codec timeouts. We will reconsider using a larger limit after seeing whether this really does reduce error rate.
PiperOrigin-RevId: 534491615
Mp4Muxer already supports writing Mp4LocationData so added that
as supported Metadata entry.
Support for more Metadata entries will be added in upcoming CLs.
PiperOrigin-RevId: 534473866
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
This change deprecates `PlayerView.setUseArtwork(boolean)` and
introduces `setArtworkDisplayMode(mode)` and
`artworkDisplayMode="off|fit|fill"` instead.
- off: no artwork is displayed (like deprecated useArtwork=false)
- fit: letterbox like media (like deprecated useArtwork=true)
- fill: scales the artwork to fill the entire width/weight of the player view
#minor-release
PiperOrigin-RevId: 534167226
Fix a bug when seeking in an opus container. The calculations inside
DefaultOggSeeker may overflow a long primitive.
Issue: androidx/media#391
#minor-release
PiperOrigin-RevId: 534128513
Earlier metadata was written multiple times as it came.
With new changes, all the distinct metadata entries will
get collected and will be written at once in the end.
PiperOrigin-RevId: 534088401
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
PiperOrigin-RevId: 534044831
This is a follow-up to 99dac0be0f where we made the same change in
ExoPlayerImpl and SimpleBasePlayer, but for consistency it makes
sense to also update the masking code in MediaControllerImplBase to
assume the same logic.
Note: MediaControllerImplLegacy already handles this case via
setMediaItems and doesn't need to be updated further.
#minor-release
PiperOrigin-RevId: 534038759
The methods in ExoPlayerImpl and MediaControllerImplBase that determine
the new PlayerInfo/PlaybackInfo currently have a hard-to-reason-about
setup where the method generating the new info accesses other methods
that rely on the existing class field instead of working with the
passed in PlayerInfo/PlaybackInfo. This prevents reuse of the util
methods (e.g. for replaceMediaItems) because they access potentially
stale state.
This change untangles these methods a bit by making the util methods
either static or at least ensure that they don't rely on existing
class fields of PlayerInfo/PlaybackInfo. Overall, the change is a
complete no-op.
#minor-release
PiperOrigin-RevId: 534036633
MediaControllerImplBase currently drops the pending initial seek
position when a user sets an empty playlist.
When seeking in empty playlists and setting new empty playlists,
the class also drops the the period index (and wrongly assigns zero
instead of the windowIndex).
#minor-release
PiperOrigin-RevId: 534035046
The main interface documentation hasn't been updated substantially
since 2017 and is missing notes for many of its current features and
requirements.
Also change the recommendation for implementors from BasePlayer to
SimpleBasePlayer to ensure new classes are more likely to cover all
of the interface requirements.
#minor-release
PiperOrigin-RevId: 534027117
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This is useful for cases where only certain types (e.g. only video)
from a source are needed and other tracks should be filtered out
completely to avoid later track selection issues.
#minor-release
PiperOrigin-RevId: 533394658
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 533130932
This device failed on HdrEditingTest's exportAndTranscode_hlg10File_whenHdrEditingUnsupported_toneMapsOrThrows
before this CL, and succeeds on that test after this CL.
PiperOrigin-RevId: 532796897
Have the FinalShaderProgramWrapper / VideoFrameProcessor texture
output access textures provided through a texture pool, that
recycles used textures.
Also, add the TexturePool interface to generally re-use textures.
PiperOrigin-RevId: 532754377
Propagate the "end of current stream" signal directly after queueing the
last frame, instead of waiting for the next onReadyToAcceptInputFrame()
call.
PiperOrigin-RevId: 532739462
Use Kotlin Charsets from the `kotlin.text` package, the `java.nio.charset.StandardCharsets` or the `com.google.common.base.Charsets` instead.
#minor-release
PiperOrigin-RevId: 532469103
Use a non deprecated constructor that includes the option to provide a `channelDescriptionResourceId` parameter.
#minor-release
PiperOrigin-RevId: 532450975
This change enables the IMA extension to play live DASH streams
with DAI support. Samples streams can be found and played in the
main demo app.
Issue: google/ExoPlayer#10912
#minor-release
PiperOrigin-RevId: 532407708
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Use a non-deprecated constructor that accepts additional fields(`cause`, `responseBody`) to enhance error logging.
#minor-release
PiperOrigin-RevId: 532190896
This methods allows to replace single items or a range of items directly
without using separate operations for add and remove. The advantage is
more readable code for apps and the potential for player
implementations to optimize this process (e.g. only replace values
without interrupting playback).
The current change just introduces the API with its default behavior.
The default logic will be removed again in the future in favor of
better logic in the Player implementations.
Issue: google/ExoPlayer#8046
PiperOrigin-RevId: 532151471
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
The periodic updates are only meant to happen while we are in the
same period or ad. This was already guaranteed except for two cases:
1. The Player in a session has updated its state without yet calling
its listeners
2. The session scheduled a PlayerInfo update that hasn't been sent yet
... and in both cases, the following happened:
- The change updated the mediaItemIndex to an index that didn't exist
in a previous Timeline known to the Controller
- One of the period position updates happened to be sent at exactly
this time
This problem can be avoided by only scheduling the update if we are
still in the same period/ad and haven't scheduled a normal PlayerInfo
update already.
Since new MediaControllers may still connect to old sessons with this
bug, we need an equivalent change on the controller side to ignore such
buggy updates.
PiperOrigin-RevId: 532089328
When exporting compositions with multiple images in a row, transformation could
get stuck if a shader was ready to accept input when end-of-stream was already
signaled and queued from upstream. Fix accounting for the downstream capacity.
Manually tested on concatenations with several images and several videos in a
row, by adding logging and verifying the capacity updates as expected across
edited media item transitions.
PiperOrigin-RevId: 532088793
In the past, the SequenceAssetLoader was released in TransformerInternal
when the export ended.
fc539da061 was made to release the SequenceAssetLoader earlier, when
loading ended. This was causing player release timeouts because the last
AssetLoader in the sequence was released before the SamplePipelines (see
0b40bc37ab for more information).
The code that was releasing the SequenceAssetLoader was first commented
out because we didn't have an understanding of what was happening.
This change removes the early SequenceAssetLoader release all together.
It doesn't have any effect as this code was already commented out.
PiperOrigin-RevId: 532065673
The output end-of-stream notification from the last shader could theoretically
arrive before the latch for detecting it is created, which might cause waiting
on the latch indefinitely. Create the latch before signaling end of stream so
that it's guaranteed to be set before the end-of-stream signal arrives.
PiperOrigin-RevId: 532056472
When a `MediaButtonReceiver` is found in the manifest, the library
can implement the contract of SystemUI to signal that the app wants
a playback resumption notification to be displayed.
And, vice versa, if no `MediaButtonReceiver` is in the manifest, the
library will signal to not show the notification after the app has been
terminated.
#minor-release
PiperOrigin-RevId: 531516023
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
Until the linked bug is fixed, relax constraints to allow this one device to
pass, to suppress failures and avoid triage toil.
PiperOrigin-RevId: 531259233
An app must only have a single service in the manifest that is either
exposing `MediaLibraryService.SERVICE_INTERFACE` or
`MediaSessionService.SERVICE_INTERFACE`. Hence the component name found by
querying the package manager for a service never returns a different result
when queried again.
The static `MediaSessionImpl.serviceComponentName` can hence be removed
and the package manager queried again when a second session instance
is created.
#minor-release
PiperOrigin-RevId: 531210456
This change adds end-to-end Robolectric playback tests which handle
the scenario the player is playing audio via passthrough and
AudioTrack raises the ERROR_DEAD_OBJECT error upon which the player
attempts to recover by switching to another audio format.
PiperOrigin-RevId: 531180183
The texture input tests in TransformerEndToEndTest were not passing on
Pixel 7. Implemented a fix and fixed other minor threading issues I
spotted while looking at the code.
PiperOrigin-RevId: 531141659
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
PiperOrigin-RevId: 531056436
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
The session activity is already sent to the controller with the
`ConnectionState` when it connects. This change adds the ability to update the
activity.
This allows an app to change the intent that is used to open an activity
for the notification. An app is likely to want to change the session activity
just before the session is released. This allows to use a different activity or
more importantly the back stack of the activity for while the app is running
and when used for the playback resumption notification.
PiperOrigin-RevId: 530627102
Exceptions thrown when switching AssetLoader were not reported through
the error listener. Therefore, the resources were not released and the
export was not ending.
PiperOrigin-RevId: 530626300
If tone-mapping was requested for a device supporting HDR encoding,
isToneMapped was false in VideoSamplePipeline.EncoderWrapper. This was
causing the encoder to expect HDR.
Also did some renamings to improve readability
PiperOrigin-RevId: 530584010
similar error to 9baa6f6be5L `registerInputStream` sets the textureManager, so reordering makes sure the textureManager is set before you set the frame info. This is important for texture input, where the frame info provides the width and height.
PiperOrigin-RevId: 530579584
Adding items to an empty playlist is slightly different from adding
items to a non-empty playlist, because the former usually requires to
handle a change in the current item, position and playback state,
while the latter is not expected to affect the current item, position
or state.
The current ExoPlayer and SimpleBasePlayer code doesn't account for
this difference, leading to inconsistent behavior between
setMediaItem(s) and addMediaItem(s) when called on an empty playlist.
PiperOrigin-RevId: 530549928
For DefaultVideoFrameProcessorVideoFrameRenderingTest: `registerInputStream` sets the textureManager, so reordering makes sure the textureManager is set before you set the frame info. This is important for texture input, where the frame info provides the width and height.
PiperOrigin-RevId: 529753404
`VERSION_INT` is quite long with several sections, and it's easy to make
a mistake when updating it - this should help since it checks it against
`VERSION`, which is more easily human readable/writable.
PiperOrigin-RevId: 529747023
Calling LibraryResult.toBundle() could have caused a CastClassException.
This was because when unbundled with UNKNOWN_TYPE_CREATOR.fromBundle(Bundle),
the valueType was set to VALUE_TYPE_ITEM_LIST for all types and the MediaItem
was attempted to be casted to a list.
PiperOrigin-RevId: 529717688
Also change some type parameter names in `MediaSession.BuilderBase`
because `C` now clashes with the import of `androidx.media3.common.C`.
#minor-release
PiperOrigin-RevId: 529665698
The media button has API support with
`Callback.getPlaybackResumption()` that apps need to override to provide
a playlist to resume playback with.
Issue: androidx/media#167
PiperOrigin-RevId: 529495845
* Implement RendererCapabilities.Listener in DefaultTrackSelector.
* Add new methods TrackSelector.invalidateForRendererCapabilitiesChange and TrackSelector.InvalidateListener.onRendererCapabilitiesChanged.
* Add new field allowInvalidateSelectionsOnRendererCapabilitiesChange to DefaultTrackSelector.Parameter to allow opt-in of the renderer capabilities detection feature.
* Add logics of triggering track reselection when renderer capabilities change.
PiperOrigin-RevId: 529067433
When we created androidTests, in the past, they always had a URI pointing to a resource, therefore we always had a URI scheme. With texture input, this will not longer be the case (EditedMediaItems's may have URI.EMPTY, which have a null scheme) so we need to check for this so tests don't falsely fail.
PiperOrigin-RevId: 528848411
The existing logic to drop (actually fail on) 0 sized samples seems no op if
if 2 out of 10 samples are of size 0.
Checked same scenario with MediaMuxer where
1. If input file has 300 samples.
2. Make every 5th sample as an empty byte buffer.
3. Output file is generated without error.
4. Output file has 240 samples.
5. Exoplayer is able to play output file (blurry).
The new change is in line with MediaMuxer behaviour.
PiperOrigin-RevId: 528798046
Systems accepting URIs should treat schemes as case-insensitive
([RFC 3986 Section 3.1](https://www.rfc-editor.org/rfc/rfc3986#section-3.1)):
> An implementation should accept uppercase letters as equivalent to
> lowercase in scheme names (e.g., allow "HTTP" as well as "http") for
> the sake of robustness
PiperOrigin-RevId: 528735287
This means that comments like `//copybara:media3-only` are now detected
(no space between `//` and `copybara`) which will ensure that lines like
this are correctly transformed for the media3 and exoplayer2 GitHub
repos:
aa4e008014/library/effect/build.gradle (L33)
PiperOrigin-RevId: 527919649
Also make FinalShaderProgramWrapper always receive internal texture.
This means it does not sample from a input texture, and its input color is
always linear, hence the input type does not matter.
PiperOrigin-RevId: 527869045
*** Original commit ***
Effect: glFlush instead of glFinish on tex output
This is much faster (~2-3x) than glFlush. While there's a risk that GL commands
queued to the GL server may not be complete by the time non-GL commands access
the texture, this should be unlikely as we only access the texture from GL.
If we see stability issues in the future, we can reconsider and move this back
to glFinish (or GL synchronization mechanisms like fences, which are more
complex)
***
PiperOrigin-RevId: 527848094
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
This is much faster (~2-3x) than glFlush. While there's a risk that GL commands
queued to the GL server may not be complete by the time non-GL commands access
the texture, this should be unlikely as we only access the texture from GL.
PiperOrigin-RevId: 527641520
References to the service are kept from MediaSessionStub
and from a long-delayed Handler messages in ConnectionTimeoutHandler.
Remove strong references from these places by making the timeout
handler static and ensuring ConnectedControllersManager only keeps
a weak reference to the service (as it's part of MediaSessionStub).
Issue: androidx/media#346
PiperOrigin-RevId: 527543396
Add `VideoFrameProcessor.registerInputStream()` to signal a new type of input.
And `InputHandler.signalEndOfCurrentInputStream()` to signal to `InputHandler`
partial input stream completion.
Fully processed means after FinalShaderProgramWrapper releases the last frame.
PiperOrigin-RevId: 527356646
In ASwB, all Transformer tests can be run by right-clicking on the project and
clicking "Run all tests". We cannot, however, select only some specific test
files within a project (ex. all non-analysis tests) to run tests on.
Add @Ignore to analysis tests, which are not intended to be run anyways
when determining whether Transformer is working on some device. These
tests also don't have proper skipping logic when a device doesn't support a
format, so they can't be run effectively on low-end devices anyways.
This eases manual testing, for example when debugging whether tests all pass
on a device.
When analysis tests are desired to be run, it should be easy to comment out
the @Ignore.
PiperOrigin-RevId: 527289600
This method doesn't really serve a purpose that isn't handled
elsewhere. The return value is also not forwarded to anyone.
PiperOrigin-RevId: 527283166
To reliably reject the System UI playback resumption notification on
all API levels (specifically API 30), the backward compatibility layer
needs to return `null` for the library root.
This is not possible in the Media3 implementation. This change allows
an app to return a `LibraryResult.ofError(RESULT_ERROR_NOT_SUPPORTED)`
that then is translated to return null by the backwards compatibility
layer.
Issue: androidx/media#355
Issue: androidx/media#167
Issue: androidx/media#27
See https://developer.android.com/guide/topics/media/media-controls#mediabrowserservice_implementation
PiperOrigin-RevId: 527276529
This is a helper method that can used to obtain information about
the controller that is currently calling a Player method.
PiperOrigin-RevId: 527268994
Allow the VideoFrameProcessor to output to a texture without an output surface.
Tested by updating texture output tests to no longer output to a surface.
PiperOrigin-RevId: 527244605
The only dependencies that are not updated are the ones that need
to be kept in sync with other system (like Android source tree) or
would require a Kotlin dependency in common or exoplayer modules.
As a side effect, some demo apps now need a Kotlin config and some
additional modules require desugaring/multidex logic. To simplify
the setup, the desugaring and multidex steps are added to the common
config.
PiperOrigin-RevId: 527243950
This was only used in EncoderWrapper, so move createSupportedTransformationRequest
from VideoSamplePipeline to EncoderWrapper to reduce its scope.
PiperOrigin-RevId: 527226578
The production code changes are in transformer, but the tests in effect have also been updated to confirm the is no color regression `inputColorInfo.colorTransfer=C.COLOR_TRANSFER_SRGB`
PiperOrigin-RevId: 526950435
Previously, I assumed that SDR contents must be BT709, and HDR contents must be
BT2020. Turns out BT2020 is just wide-gamut, and SDR contents / transfers may be
represented in BT2020 color spaces.
Relax the check, so that we don't throw when valid BT2020 SMPTE 170M contents
are input into effects.
PiperOrigin-RevId: 526668347
This implicitly fixes a bug by removing the buggy implementation in H265Reader in favour of a working one. This change also adds tests to confirm the parsing bug is fixed.
`prepare()` now logs a warning if it's called before `setPlayer()`
because it's not possible to tell if it's being called on the wrong
thread (since 3480a27994).
This change finds all the places one is called immediately after the
other and flips the order to be more correct.
Issue: androidx/media#350
#minor-release
PiperOrigin-RevId: 526582294
This simplifies the addition of new fields in the future.
Also do some misc clean up for the volume limit values:
- Add some documentation to mention assumed defaults
- Add the IntRange annotations to match the ones we have in Player
already
- Mention the limits in the relevant Player methods
- Avoid bundling default values
- Improve range checks for masking in MediaController
PiperOrigin-RevId: 526029619
This is a bug currently, where commands are created once but never
updated again if the actions in MediaSessionCompat are changed.
PiperOrigin-RevId: 525999084
If the limited number of input buffers causes reading of all samples except the last one conveying end of stream, then the last frame will not be rendered.
PiperOrigin-RevId: 525974445
Whenever a frame is queued to the shader, it's guaranteed that there will be a
subsequent `onInputFrameProcessed` callback, so we can pass on the
end-of-stream signal there.
PiperOrigin-RevId: 525850141
Creates a way for apps to provide their EGLContext to DefaultVideoFrameProcessor, so that we can attach their context to the one we create. See [the EGL docs for more information about how contexts are shared in GL](https://registry.khronos.org/EGL/sdk/docs/man/html/eglCreateContext.xhtml)
PiperOrigin-RevId: 525708652
Removes glObjectsProvider from `VideoFrameProcessor` and `Effects`. Apps will set the glObjectsProvider on the DefaultVideoFrameProcessor.Factory.Builder when providing a custom DefaultVideoFrameProcessor.Factory, rather than in `Effects`.
PiperOrigin-RevId: 525169059
A new texture manager will be created for input by texture ID so this texture manager won't be the only one to handle internal (i.e. non-external) textures.
PiperOrigin-RevId: 525116460
`findDecoder/EncoderForFormat` seem to be more restrictive than querying
`MediaCodecList` as done for playback, and it's not clear that the cases where
no codec is found correspond to actual cases that would fail given that it
seems this returns an empty string for many cases in production.
Switch to using `MediaCodecUtil` and `EncoderUtil` for querying codecs instead.
PiperOrigin-RevId: 525078321
This was just for testing and finishing this class is not useful
as it can't wrap an existing MediaPlayer without owning it to
track its state.
PiperOrigin-RevId: 524851654
The actual csd data contains NAL units so it should always start with
a NAL unit start code (00 00 00 01).
This issue was not caught before because in the code there was no
validation to check whether its a valid NAL unit.
PiperOrigin-RevId: 524849867
The sessions may have different application threads for their players,
and the service with its notification provider runs on the main thread.
To ensure everything runs on the correct thread, this change labels
methods where needed and fixes thread access in some places.
Issue: androidx/media#318
PiperOrigin-RevId: 524849598
This check was a leftover from when the metadata was generated from
the MediaItem only. Since we moved to the actual MediaMetadata fields,
the check is completely unnecessary and prevents accessing metadata
when the GET_CURRENT_MEDIA_ITEM command is not available.
#minor-release
PiperOrigin-RevId: 524837587
*** Original commit ***
Fix double initialisation of createIsoLanguageReplacementMap
In the absence of any lock `createIsoLanguageReplacementMap`
method was getting called twice due to race condition.
Used Suppliers.memoize() which is by default thread safe.
***
PiperOrigin-RevId: 524794650
Reusing the loader wrappers allows us to use the current RTSP connection
without having to set up a new RTSP connection. Consequently, the Extractors,
RTP readers are also preserved.
PiperOrigin-RevId: 524663012
In `ExternalTextureManager` in seemingly rare cases end of stream is signaled
at the point where a frame is currently pending processing. In that case the
video end of stream signal was lost. If the muxer timeout was enabled this
case would result in throwing an exception, but otherwise the operation would
get stuck
Add code to signal end of stream in `onInputFrameProcessed` as well, so that we
signal end of stream when the pending frame is handled.
Tested by running
`TransformerEndToEndTest.loopingTranscodedVideo_producesExpectedResult` several
times.
PiperOrigin-RevId: 524361069
MediaMuxer does not support out-of-order video frames API 25. Use
a test file with frames in order in
loopingTranscodedAudio_producesExpectedResult. This is necessary for
tests that transmux video samples.
PiperOrigin-RevId: 524309318
A passthrough effect allows for testing having an intermediate
effect injected, which uses different OpenGL shaders from having no
effects.
PiperOrigin-RevId: 524276991
In the absence of any lock `createIsoLanguageReplacementMap`
method was getting called twice due to race condition.
Used Suppliers.memoize() which is by default thread safe.
PiperOrigin-RevId: 524007754
The overrides specified by a MediaController may not use the exact
same TrackGroup instances as known to the Player because the groups
have been bundled to and from the controller. This bundling may
alter the instance slightly depending on the version used on each
side of the communication and the fields set (e.g. Format.metadata
is not supported for bundling).
This issue can be solved by creating unique track group ids for
each group on the session side before bundling. On the way back,
the groups in the track selection parameters can be mapped backed
to their original instances based on this id.
#minor-release
Issue: androidx/media#296
PiperOrigin-RevId: 523986626
Previously, ExoPlayerImpl had volume flags hardcoded to SHOW_UI, but now the developer can choose what happens on volume change. The old methods have been deprecated.
PiperOrigin-RevId: 523974358
The setter command is only used for setPlaylistMetadata and can
be named COMMAND_SET_PLAYLIST_METADATA. The getter commnad is
used to access getMediaMetadata and getPlaylistMetadata and can
be better named COMMAND_GET_METADATA to reflect this usage.
PiperOrigin-RevId: 523673286
Previously `ChannelMixingAudioProcessor` output float because it was
implemented using the audio mixer's float mixing support.
Move the implementation over to just using the `ChannelMixingMatrix` and make
it publicly visible in the common module so it can be used by apps for both
playback and export.
Also resolve a TODO that no longer had a bug attached by implementing support
for putting multiple mixing matrices to handle different input audio channel
counts, and fix some nits in the test code.
Tested via unit tests and manually configuring a `ChannelMixingAudioProcessor`
in the transformer demo app and playing an audio stream that identifies
channels, and verifying that they are remapped as expected.
PiperOrigin-RevId: 523653901
It's currently not possible to even subclass MediaController because
the constructor is package-private. To avoid any accidental usage or
future indirect subclassing, all methods can be marked as final.
PiperOrigin-RevId: 523648114
This change selects the best suited media button receiver
component and pending intent when creating the legacy
session. This is important to ensure that a service can
be started with a media button event from BT headsets
after the app has been terminated.
The `MediaSessionLegacyStub` selects the best suited
receiver to be passed to the `MediaSessionCompat`
constructor.
1. When the app has declared a broadcast receiver for
`ACTION_MEDIA_BUTTON` in the manifest, this broadcast
receiver is used.
2. When the session is housed in a service, the service
component is used as a fallback.
3. As a last resort a receiver is created at runtime.
When the `MediaSessionLegacyStub` is released, the media
button receiver is removed unless the app has provided a
media button receiver in the manifest. In this case we
assume the app supports resuming when the BT play intent
arrives at `MediaSessionService.onStartCommand`.
#minor-release
Issue: androidx/media#167
Issue: androidx/media#27
Issue: androidx/media#314
PiperOrigin-RevId: 523638051
It is not possible to provide a safe deprecation path because
BaseTrackSelection can't easily know which of the methods is
implemented by subclasses.
PiperOrigin-RevId: 523471578
Change what format is logged from MediaCodecAudioRenderer when
AudioSink throws InitializationException. We printed the
AudioSink's format, which most of the times is audio/raw (PCM)
and not the renderer's format. With this change both formats are
logged.
#minor-release
Issue: google/ExoPlayer#11066
PiperOrigin-RevId: 523456840
In addition to the changes in 3a5c4277a7
This change essentially reverts 30e5bc9837 (Merged Jul 2022).
From this CL on, `VideoFrameProcessor` takes in non-offset, monotonically
increasing timestamps. For example, with one 5s and one 10s video,
- `VideoFrameProcessor`'s input should start from 0
- On switching to the second video (10s), the timestamp of the first frame in
the second video should be at 5s.
In ExoPlayer however, `streamOffset` is managed differently and thus needs
correction before sending the frames to `VideoFrameProcessor`:
- The timestamp of the first video is offset by a large int, so the first frame
of the first media item has timestamp (assuming) 10000000000000000
- The last frame of the first media item has 10000005000000000
- At this point the stream off set is updated to 10000005000000000
- The pts of the first frame of the second video starts from 0 again.
PiperOrigin-RevId: 523444236
Simplify the audio encoder input timestamp calculation. The new calculation
avoids drifting by tracking the total number of bytes encoded rather than
tracking the timestamp and remainder separately, and also makes the timestamps
match the decoder output buffer timestamps.
Also switch one of the export tests that was passing through AMR samples over
to using WAVE audio. The problem with using AMR is that the compressed samples
are not necessarily an integer number of audio frames and the shadow decoder
would pass them from input to output, so the audio encoder was receiving
non-integer numbers of audio frames.
Tested by logging the timestamps at the decoder output and encoder input with
forcing transcoding audio, and verifying that after this change the audio
timestamps are no longer off by one.
PiperOrigin-RevId: 523409869
The video asset loader renders decoder output to a surface texture, and if the
video sample pipeline is in the process of updating the surface texture image
at the moment when the asset loader video decoder is released this seems to
cause `MediaCodec.release` to get stuck.
Swap the release order so that we stop updating the texture before trying to
release the codec.
PiperOrigin-RevId: 523401619
Log at debug level immediately when MediaCodec throws. This logging will be
output closer to the time when the error actually happened so should make it
easier to identify the order of components failing.
Downgrade logging of errors after export ends to warning level, as output may
still be fine if there was a problem after exporting completed (though it's
still worth logging a warning as the device may not be in a good state).
PiperOrigin-RevId: 523370457
Before this CL, SurfaceTexture.onFrameAvailable was used to tell whether a frame
was available in the VideoFrameProcessor's output texture. This was incorrect, as
it would rely on having the texture be written to before the
SurfaceTexture.onFrameAvailableListener is invoked, leading to null-pointer-
exceptions on timeouts.
Instead of using DefaultVideoFrameProcessor different interfaces to set that we
want to output to a texture, and get that output texture, use one interface that
sets a listener, and renders to a texture iff that listener is set. As this
listener is executed on the GL thread, this also allows us to no longer need to
expand visibility for the GL task executor and tasks.
PiperOrigin-RevId: 522362101
There is a race with the ad period preparation having completed
and `onDownstreamFormatChanged` being called when a live stream
is joined in an ad period. In this case the stream event metadata
of the period is immediately emitted and causing an ad media period
being created that is selected in `getMediaPeriodForEvent` before
being prepared (1 out of 4).
Using an `isPrepared` flag makes sure we don't hand out the media
period to early in `getMediaPeriodForEvent`.
PiperOrigin-RevId: 522340046
To set the chroma format and depth information for H265 format,the csd-0 data
needs to be parsed. The previous implementation skipped parsing
csd-0 data and hard coded values based on "profile" field in MediaFormat.
Along with above mention changes, corrected some of the comments
as per spec.
PiperOrigin-RevId: 522335595
This change improves `ImaUtil.maybeCorrectPreviouslyUnknownAdDuration` to
handles the case when the timeline moves forward more than a single period
while an ad group with unknown period duration is being played.
PiperOrigin-RevId: 522292612
If the duration is reported in MediaMetadataCompat, it should
also be set in the QueueTimeline to match controller.getDuration()
PiperOrigin-RevId: 522022953
NPE in toneMap_hlgFrame_matchesGoldenFile and toneMap_pqFrame_matchesGoldenFile was created because a uEnableColorTransfer uniform was being created on the HDR path, when HDR shader files don't have this uniform. (they don't support disable color transfers right now)
Fix: only create the uniform when input is SDR.
manually tested on failing tests
PiperOrigin-RevId: 522002603
MediaItems are not meant to be unique in a playlist. If a legacy
session publishes multiple items that get converted to equal MediaItems,
the current code fails because we look up queue ids in a Map (that
doesn't allow duplicate entries).
Fix this by storing a simple list of items with additional data.
#minor-release
Issue: androidx/media#290
PiperOrigin-RevId: 521993802
As most classes are used via interface only and people depending on it locally can always find the Javadoc in Android Studio directly, we don't plan to add Javadocs for these extensions module in developer.android.com.
PiperOrigin-RevId: 521993756
It's currently not possible to even subclass MediaSession because
the constructor is package-private. To avoid any accidental usage or
future indirect subclassing, all methods can be marked as final.
PiperOrigin-RevId: 521775373
This ensures that anybody implementing `Player` (which is relatively
unusual) must override at least one `@UnstableApi` method, and therefore
opt-in to the unstable API.
PiperOrigin-RevId: 521769675
* Add a new event `onAudioCapabilitiesChanged` in `AudioSink.Listener` interface.
* Add an interface `RendererCapabilities.Listener`, which will listen to `onRendererCapabilitiesChanged` events from the renderer.
* Add `getRendererCapabilitiesReceiver` method for `TrackSelector`, and register/unregister the `TrackSelector` as the `RendererCapabilitiesReceiver` (if implemented) when the `ExoPlayer` is initialized/released.
* Trigger the `AudioSink.Listener.onAudioCapabilitiesChanged` and further `RendererCapabilities.Listener.onRendererCapabilitiesChanged` events when the audio capabilities changes are detected in `DefaultAudioSink`.
PiperOrigin-RevId: 521427567
The check currently relies on the default value of 0 returned if the
Bundle doesn't define a pid. But in some cases, like Robolectric unit tests,
0 is a possible pid. The check can be improved by directly asserting that
the value is defined.
PiperOrigin-RevId: 521414649
This includes:
- Add an ad for each LOADED event of the SDK by taking the duration
of the ad from the media structure to exactly match the start position
of ads and then use `addLiveAdBreak()` that is used for HLS live already.
- When the refreshed content timeline arrives, possibly correct
the duration of an ad that has been inserted while the period duration was
still unknown (last period of the live timeline).
- When an ad period is removed the ad group needs to be put into a condition
that allows continuing playback.
PiperOrigin-RevId: 520919236
Handling of the stream offset and start position was unnecessarily
complex and even incorrect. It was going to be an issue for
concatenation of video and image input.
The stream offset is the offset added before decoding/encoding to
make sure it doesn’t fail in case of negative timestamps (which do
rarely occur).
The start position is equal to the stream offset, plus the clipping
start time if the media is clipped.
Before this change:
- Samples were offset by the start position before decoding, and this
offset was removed before muxing.
- The startPosition of the first MediaItem in a sequence was used for
all the MediaItems in this sequence (which is incorrect).
- The stream offset was removed before applying the GL effects and
added back before encoding so that it was not visible to the OpenGL
processing.
After this change:
- The start position is subtracted in the AssetLoader, so that the
downstream components don’t have to deal with the stream offsets and
start positions.
- Decoded samples with negative timestamps are not passed to the
SamplePipelines. The MediaMuxer doesn’t handle negative timestamps
well. If a stream is 10 secondes long and starts at timestamp -2
seconds, the output will only contain the samples corresponding to the
first 8 (10 - 2) seconds. It won’t contain the last 2 seconds of the
stream. It seems acceptable to remove the first 2 seconds instead.
PiperOrigin-RevId: 520916464
Releasing the player once a sequence has ended seems to make our
emulator tests flaky. Comment out until we find the cause. The player
will still be released from TransformerInternal, when the export ends.
PiperOrigin-RevId: 520886181
The `DashMediaSource` wrongly added an offset to the media times set
to the `MediaLoadData`. With this the `startTimeMS` and `endTimeMs`
don't represent the positions in the period but in the stream.
`DashMediaSource` was the only call site that was setting the offset
to a non-zero value. So if we are using 0 for the `DashMediaSource`
as well, the offset is redundant and we can remove it everywhere.
PiperOrigin-RevId: 520682026
The media3-hosted versions of these SVGs were removed due to a change in
the way the reference docs are generated. While work on getting them
hosted on developer.android.com, this change simply links to the
(identical) exoplayer2 versions in order to fix the media3 docs.
#minor-release
PiperOrigin-RevId: 520647905
Also fixed the javadoc link in devsite and removed javadoc links from decoder extensions as it is not published yet on developer.android.com.
#minor-release
PiperOrigin-RevId: 520636868
