If stream is not considered final and `ClippingMediaSource` is read to `endUs`, then `BaseRenderer.readSource` returns `C.RESULT_NOTHING_READ`. In that case, the `lastBufferInStreamPresentationTimeUs` is not set and the last frame is not rendered.
PiperOrigin-RevId: 554418971
This workaround was added for TS streams that do not adjust their
timestamps to start from zero. Over time, the default audio sink
logic has become more robust towards unexpected timestamps and
we no longer need this workaround to jump forward in time.
The workaround also actively caused issues by adjusting the audio
timestamps backwards if the stream starts with large negative
values. See Issue: androidx/media#291. This caused playback to get stuck due
to another bug in the first-frame rendering logic in the video
renderer that is now fixed.
PiperOrigin-RevId: 553493618
This is the same change as 8655429af7, just on the second call site
of readDiscontinuity. The tests didn't cover this case yet because
they never queued more than 2 items in a playlist.
PiperOrigin-RevId: 553485244
This means we now require 2+ input frames per input, and compare the primary
stream timestamp with secondary stream timestamps in order to select the
correct output timestamp. We also must release frames and back-pressure as
soon as possible to avoid blocking upstream VFPs.
Also, improve signalling of VFP onReadyToAcceptInputFrame
PiperOrigin-RevId: 553448965
setInputFormat calls registerInputStream and will cause VideoFrameProcessor to
reconfigure. We don't need to call it when setting up the VFP
(in `onReadyToInitCodec()`). Rather, we wait until `onOutputFormatChanged()`
called (this output format refers to mediaCodec's outptut format) to register
the input stream.
PiperOrigin-RevId: 553448633
ExoPlayer queues the EOS buffer to the decoder with offset/size/timestamp all
equal to zero, and a EOS flag.
69769c77b3 set TIME_END_OF_SOURCE on the EOS buffer from the extractor.
Queueing the EOS buffer to the decoder with TIME_END_OF_SOURCE causes some
decoders to output wrong timestamps in its output.
This CL replicates what ExoPlayer does in Transformer.
PiperOrigin-RevId: 553104213
We currently only force the first frame if the frame timestamp is
greater than the stream *offset*.
This is wrong for two reasons:
1. The timestamp and the offset are not comparable and it should be
the stream start position.
2. The check should only be applied at stream transitions where we
need to make sure that a new first frame isn't rendered until we
passed the transition point.
We have to fix both issues together, because fixing just issue (1)
causes seeks to before the start position to no longer render the
frame (and playback will be stuck). A new test covers this case.
We also amend the stream transition test case to actually test what it
promises to test and add a test for prerolling samples at the
beginning, to ensure the first frame is still renderered.
Issue: androidx/media#291
PiperOrigin-RevId: 552858967
We currently use 3 different booleans to track the state of the first
frame rendering, which implies that there are 8 distinct possible
overall states. However, this is actually a staged process and there
are only 3 different overall states in the current code. This means
it's clearer and easier to reason about if the variables are combined
to a single state value. Overall, this should be a complete no-op.
State mapping:
- rFFAReset=false, rFFAEnable=false, mayRenderFFAEINS=false
=> FIRST_FRAME_NOT_RENDERED_ONLY_ALLOWED_IF_STARTED
- rFFAReset=false and/or rFFAEnable=false, mayRenderFFAEINS=any
=> FIRST_FRAME_NOT_RENDERED
- rFFAReset=true, rFFAEnable=true, mayRenderFFAEINS=any
=> FIRST_FRAME_RENDERED
PiperOrigin-RevId: 552857802
Refactored `CmcdLog` to `CmcdHeadersFactory` for improved representation of its purpose and updated implementations.
#minor-change
PiperOrigin-RevId: 552831995
This allows for custom implementations of this interface, like
a TestVideoCompositor or partner-implemented implementation
PiperOrigin-RevId: 552541631
`SubtitleExtractor` used to rely on a `SubtitleDecoder`. However, now all SubtitleDecoders that are used for side-loaded subtitles have been migrated to a `SubtitleParser` interface. We can therefore refactor the extractor.
The `SubtitleExtractor` is only used for side-loaded subtitles which means we do not require the migration of the CEA-608/708 `SubtitleDecoders`.
PiperOrigin-RevId: 552471710
Fix short term reference picture list parsing. Before this change, `deltaPocS0`
was derived by adding one to the value of the syntax element
`delta_poc_s0_minus1`, but (maybe surprising) the specification actually says
that `DeltaPocS0[stRpsIdx][i]` should be assigned the negation
`-(delta_poc_s0_minus1[i] + 1)` on the first iteration, then that value added
to the previous value on previous iterations. See equations (7-67) to (7-70) in
the 2021-08 version of the H.265/HEVC specification.
Also read the number of long term reference pictures once rather than on every
loop iteration (subsection 7.3.2.2.1).
PiperOrigin-RevId: 551852999
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Move shared test logic to the test runner.
This does increase indirection, which isn't usually preferable in tests.
However, we will have many different tests that would use logic
like this, so this allows us to reduce repetition.
PiperOrigin-RevId: 551536438
1. For codecs that change timestamps, we need to use greater
or equal instead of just equal for comparison.
2. We should only make this comparison once a value has been
set.
3. The largest queue timestamp isn't updated before using it
for this detection, meaning that we also mark the
second-to-last sample as the last one.
PiperOrigin-RevId: 550901978
This should make no functional difference because `SampleExporter` always
checks for H.265 and H.264 first. However, in case we ever change that code,
these are used in priority order so it's better to order them accordingly.
PiperOrigin-RevId: 550894935
We currently pass in the time at which the stream originally started,
but newly enabled renderers should get the current playback position
instead.
PiperOrigin-RevId: 550894630
When generating silence for AudioProcessingPipeline, audio never
queued EOS downstream.
Linked to this, when silence followed an item with audio, the silence
was added to SilentAudioGenerator before the mediaItem reconfiguration
occurred. If the silence had effects, the APP would be flushed after
silence queued EOS, resetting APP.isEnded back to false, so AudioGraph
never ended.
Regression tests reproduce failure without fix, but pass with it.
PiperOrigin-RevId: 550853714
For each event, the timestamp and presentation time is logged. The trace can
then be dumped to a tsv file and easily imported in a spreadsheet.
PiperOrigin-RevId: 550839156
Instead of `text/x-exoplayer-cues`, we will use `application/x-media3-cues`.
The prefix should be `application` not `text` since the encoded form is arbitrary bytes, not necessarily text. The name should not reference `exoplayer`, since the Media3 Extractors (which are not part of `exoplayer`) produce this format.
PiperOrigin-RevId: 550181852
signalEndOfInputStream is needed for when streams have different amounts of
frames, so that if the primary stream finishes after a secondary stream, it
can end without waiting indefinitely for the secondary stream's matching
timestamps.
onEnded mirrors this API on the output side, which will be necessary to
know when to call signalEndOfInput on downstream components (ex. on downstream)
VideoFrameProcessors
PiperOrigin-RevId: 549969933
The VideoFrameProcessingTaskExecutor already handles wrapping
GlUtil.GlException errors into VideoFrameProcessingExceptions.
Therefore, stop wrapping this ourselves, so that errors are
attributed to the correct line number with less indirection.
PiperOrigin-RevId: 549959258
Alters the OverlayShaderProgram implementation to support rotations, however we need to apply the transformations separately in order for them to work as expected so the matrix is removed from the interface in favour of explicit methods.
Adds a rotation test to ensure this ability doesn't regress
PiperOrigin-RevId: 549890847
The `MediaNotificationManager` registers an internal controller
to each session. This change marks this controller through its
connection hints and provides an API for apps to hide
implementation details of the marking.
Issue: androidx/media#389
PiperOrigin-RevId: 549712768
`TtmlDecoder` which used to be `SimpleSubtitleDecoder` will now be called `TtmlParser` and implement SubtitleParser interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `TtmlParser` instance.
PiperOrigin-RevId: 549700490
It is not part of the `SubtitleParser` interface's promise to give events for all changes to do with `Cue` objects. So while in the past, we would have `endTimeUs` of one Cue event being the `startTimeUs` of the next one, now we have that encoded in `durationUs` and can skip event with empty `Cues`.
PiperOrigin-RevId: 549629157
This tracker aims to replicate the behavior of a specific codec to
ensure MediaCodecRenderer correctly detects stream and output
format transitions. The class was needed because MediaCodecRenderer
made assumptions about codec behavior this codec did not fulfil (in
particular, changing timestamps and number of samples).
Since then, MediaCodecRenderer was made more robust to this kind of
codec behavior in general and currently has no assumptions that
require any special handling of this codec. This means we can remove
the workaround completely.
PiperOrigin-RevId: 549610989
This is no longer flaky because WebVTT subtitles are decoded on the
loading thread (enabled in this test with
`defaultExractorsFactory.setTextTrackTranscodingEnabled(true)` - and
supported for WebVTT since f0f24aa0d4).
PiperOrigin-RevId: 549594291
The class tries to be flexible to support as many different input
and codec behavior combinations as possible. But so far it didn't
spell out its remaining assumptions and explicit non-assumptions,
making it hard to know which behavior to rely on.
PiperOrigin-RevId: 549589347
Updated `ExoTrackSelection` to provide the most recent bitrate estimate, enabling the inclusion of measured throughput (mtp) as a CMCD-Request field in Common Media Client Data (CMCD) logging.
Additionally, made changes to the `checkArgument` methods in `CmcdLog` to prevent the use of default values in certain cases.
#minor-release
PiperOrigin-RevId: 549369529
`WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `WebvttParser` and implement `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `WebvttParser` instance. `WebvttSubtitle` will still be used behind the scenes to handle overlapping `Cues`.
PiperOrigin-RevId: 549298733
The end-to-end test output for the overlapping SRT and SSA subtitles
is currently incorrect. They will be fixed in a future change that
updates `TextRenderer` to support this overlap.
The 'extra' samples visible in the extractor test output files are
'empty cue list' samples produced by `SsaParser`. They will go away
when this implementation is updated to remove this behaviour and rely
on `CuesWithTiming.durationUs` instead (the 'empty list' behaviour is
not required by the `SubtitleParser` interface).
PiperOrigin-RevId: 549264593
The main demo app was still targeting API 29 to avoid scoped storage
restrictions. It is now updated to 34 (like the rest of the demo apps)
and handles scoped storage as it should handle it.
More specifically:
- We need to request READ_MEDIA_... permissions instead of
READ_EXTERNAL_STORAGE from API33.
- The legacy scoped storage opt-out can be removed
- READ_MEDIA_... permissions don't allow arbitrary file access
if the file doesn't end in a typical media file extension, so
this change adds a remark on the guide page to place samples
in the app-specific directory.
- We also don't have to request permissions for the app-specific
directories.
- Custom json files can't be placed in arbitray local locations
because they don't end in a media file extension, as there is
no way we can request a permission to load them. This means we
can remove the storage request logic in SampleChooserActivity.
Issue: google/ExoPlayer#6045
PiperOrigin-RevId: 549252474
*** Original commit ***
Rollback of b69b33206e
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
***
PiperOrigin-RevId: 549019403
This ensures the DownloadService stays functional on Android 14
where defining this type is required. On Android 14 and above,
the app also needs to define the DATA_SYNC permission, which is
added to the demo app as well. In the future, this service type
will no longer be supported and DownloadService needs to be
rewritten with another background scheduling framework.
Issue: google/ExoPlayer#11239
PiperOrigin-RevId: 548994842
AudioMixingUtil#mix handles input & output in float or Int16 PCM. Given
Float and Int16 use different sample ratnes, this util handles
conversion between the two, based on the encoding being mixed to.
Migrate AudioMixer to use the util, removing AudioMixingAlgorithm
interface and implementation. ChannelMixingAudioProcessor will be
migrated after additional performance checks.
PiperOrigin-RevId: 548994584
This was done because it was deemed correct to only start at timestamp
zero when the code was originally written. However, in case of
prerolling from a keyframe, many samples will get the same timestamp,
which is not correct and interferes with downstream logic
that deals with timestamps.
PiperOrigin-RevId: 548986160
This fixes two things in one go:
1. In order to indicate 'end of a cue' **without** relying on
`CuesWithTiming.durationUs`, `SubripParser` should have been emitting
an empty `List<Cue>` instead of the current behaviour of a
single-item list with `cue.text=""`.
2. There's no need for the empty cue (or cue list), we can use
`durationUs` to indicate the end of each list of cues.
There's no real need to ever have a `Cue` with `text=""`, so also
deprecate `Cue.EMPTY`.
PiperOrigin-RevId: 548938874
Reading a discontinuity from a media period indicates that a position
reset is required. As part of this event, the media period may need
further loading (e.g in a MergingMediaPeriod where one stream reported
a discontinuity and the other need to reload from this position).
This currently fails if the media periods was already fully loaded and
we started loading further items in the playlist. As a result, playback
is stuck forever. We can fix this by detecting that further loading is
needed and resetting the loading period to the current one.
The existing MergingPlaylistPlaybackTest already covers this case
reliably, because it combines all the right preconditions (merging
source, clipping to get a discontinuity and a playlist).
PiperOrigin-RevId: 548735177
This is a step towards adding general support for overlapping
subtitles in these formats (and others), both muxed and sideloaded:
* Issue: google/ExoPlayer#10295
* Issue: google/ExoPlayer#4794
This change adds these files to the end-to-end playback tests too, but
the subtitle track is currently disabled because renderer-side subtitle
parsing causes flaky tests (due to an uncontrolled thread in
`SimpleSubtitleDecoder`). The subtitle track will be re-enabled in
a follow-up change when loading-side subtitle parsing is added (so the
tests will no longer be flaky). At this point the overlapping subtitles
**still** won't be supported end-to-end, but a second change will
resolve this will changes in `TextRenderer` - which will change the
end-to-end playback dumps to reflect the overlapping subtitles.
PiperOrigin-RevId: 548705032
For now, just identical timestamps. A follow-up CL will allow for different
framerates. Prior tests already send identical timestamp frames, so no new
tests were added
PiperOrigin-RevId: 548676759
`EGL14` was added in API 17, so move all references into the `Api17` wrapper
class. `GLES30` requires API 18.
Remove some defensive calls to check that a context is current. Checking for GL
errors after calls should catch the case of calling GL methods without a
context (which is also only likely to come up early in development), and these
checks were not done consistently across all methods anyway. That allows
removing the API 17 requirement from `SceneRenderer` (where previously it
wasn't documented).
PiperOrigin-RevId: 548669946
The streams return end-of-input if they read no samples, but know that
they are fully buffered to at least the clipped end time. This helps to
detect the end of stream even if there are no new buffers after the end
of the clip (e.g. for sparse metadata tracks).
The race condition occurs because the buffered position is evaluated
after reading the sample. So between reading "no sample" and checking
the buffered position, the source may have loaded arbitrary amounts
of data. This may lead to a situation where the source has not read
all samples, reads NOTHING_READ (because the queue is empty) and then
immediately returns end-of-stream (because the buffered position
jumped forward), causing all remaining samples in the stream to be
skipped. This can fixed by moving the buffered position check to
before reading the sample, so that it never exceeds the buffered
position at the time of reading "no sample".
#minor-release
PiperOrigin-RevId: 548646464
Also re-use the `CuesWithTimingSubtitle` implementation (previously a
private class inside `DelegatingSubtitleDecoder`) in `ExoPlayerCuesDecoder`.
PiperOrigin-RevId: 548612040
It will act similarly to `SubtitleDecoderFactory`, but return parsers instead of decoders. In turn `SubtitleDecoderFactory.createDecoder()` cab wrap those parsers with `DelegatingSubtitleDecoder`.
PiperOrigin-RevId: 548528054
`PgsDecoder` which used to be `SimpleSubtitleDecoder` will now be called `PgsParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `PgsParser` instance.
PiperOrigin-RevId: 548520549
This serves as a sort of test with more frames for the compositor for now
(before more varied video system tests come later when integrating with
Transformer), showing it doesn't error out and outputs the right
amount of frames.
Due to the VFPTestRunner having a 5s timeout, and mostly due to presubmit
emulators being very slow with OpenGL, there is a sort of limitation
to how many frames this type of test can have, depending on the test target
PiperOrigin-RevId: 548159762
`DvbDecoder` which used to be `SimpleSubtitleDecoder` will now be called `DvbParser` and implement `SubtitleParser` interface. There was, however, already a `DvbParser`, used by `DvbDecoder` behind the scenes. Hence, the refactoring only requires the existing `DvbParser` to adhere to the new `SubtitleParser` interface.
For backwards compatibility, we will have the same functionality as `DvbDecoder` provided by `DelegatingSubtitleDecoder` backed-up by a new `DvbParser` instance, available from the `SubtitleDecoderFactory`.
PiperOrigin-RevId: 548155759
`Tx3gDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Tx3gParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Tx3gParser` instance.
PiperOrigin-RevId: 548144492
Before this CL, the text with a scale span would wrap text, with because the scale wasn't taken into account when measuring the width of the overlay.
PiperOrigin-RevId: 548123626
Unlike ExoPlayer, when play/pause is called on MediaController, the playback suppression reason is set to default causing a change in it and subsequent callbacks on the Player.Listener.
PiperOrigin-RevId: 548088931
Add Ogg ID Header and Comment Header Pages to the Ogg encapsulated Opus for offload playback. This further matches the RFC 7845 spec and provides initialization data to decoders.
PiperOrigin-RevId: 548080222
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of merges where audio or video
is the primary track and where audio, video or both are clipped.
PiperOrigin-RevId: 548061254
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of clipping transitions for
sources that are either clipped at the start, the end, or both.
PiperOrigin-RevId: 547730824
When a renderer is pre-enabled (while another playback is still
ongoing), we pass mayRenderStartOfStream=false to Renderer.enable.
This ensures we don't show any first frames while the previous media
is still playing.
Currently, we never tell the renderer when we actually stop playing
the previous media so that it could render the start of the stream,
because we allow this as soon as the renderer is in STATE_STARTED and
we assume that we have to be in STATE_STARTED to make this stream
transition.
While this assumption is true, there are also cases where we can't
start the renderers because they are not ready yet and the video
renderer can't become ready because it didn't render its first frame.
This effectively blocks playback forever.
The most direct way of solving this, is to tell the renderer that
playback has transitioned and that it is now allowed to render the
start of the stream. This means it can never get blocked as described
above.
PiperOrigin-RevId: 547727347
SingleInputVideoGraph implements GraphInput now, so the asset loaders would
interface directly with SIVG, rather than VideoSampleExporter. This is to pave
way for multi-asset video processing.
PiperOrigin-RevId: 547561042
The setPlayerCommand and setSessionCommand builder methods contain assertions to ensure that at most one of these fields is set, but this left it possible to create a command button with no command by calling build on an empty builder.
PiperOrigin-RevId: 547488248
This change also marks the buttons of the custom layout as
enabled/disabled according to available commands in the controller.
Accordingly, `CommandButton.Builder.setEnabled(boolean)` is deprecated
because the value is overridden by the library.
Issue: androidx/media#38
#minor-release
PiperOrigin-RevId: 547272588
`Mp4WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Mp4WebvttParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Mp4WebvttParser` instance.
PiperOrigin-RevId: 547248157
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
durationUs is almost always going to be a larger number than the sample
rate, so pass as the main value, rather than the multiplier.
PiperOrigin-RevId: 547193927
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
This is needed for several subtitle formats where the `data` passed to
`SubtitleParser` doesn't contain any cue timing, such as PGS, CEA-608,
CEA-708, and DVB.
PiperOrigin-RevId: 547177127
TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
We currently only log the input buffers to the codec, but the test
will be more complete and provide more insights into the playback
behavior if we also dump more information about these input buffers
(timestamps and flags) and also all output buffers with their
timestamps and whether they are rendererd (only relevant for video).
And also use the CapturingAudioSink to output the audio data we produce.
PiperOrigin-RevId: 546898937
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Some adjustments to the test to make it more correct and prevent it
from becoming flaky:
- Use separate output dump files per test setup. Once we add more data
to these files, they are not guaranteed to be the same anymore.
- Use a seek position that is actually behind the midroll as described
in the test setup.
- Change ad insertion position to ensure the ad group duration doesn't
exceed the underlying media duration.
- Add a wait for isLoading to ensure the late insertion of an ad group
happens consistently at the same processing stage.
PiperOrigin-RevId: 546825183
This changes all MediaSources in our library to allow updates to
their MediaItems (if supported).
Issue: google/ExoPlayer#9978
Issue: androidx/media#33
PiperOrigin-RevId: 546808812
This removes some stack traces in unit tests when a
`RemoveMediaController` was created with `waitForConnection=false`
in which case the missing controller in the
`MediaControllerProviderService` caused a `NullPointerException`.
PiperOrigin-RevId: 546795181
`SubripDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SubripParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SubripParser` instance.
PiperOrigin-RevId: 546538113
`SsaDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SsaParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SsaParser` instance.
PiperOrigin-RevId: 546336035
`DelegatingSubtitleDecoder` is a `SimpleSubtitleDecoder` that delegates to a `SubtitleParser` instance (e.g. future implementations like `WebvttParser`, `SubripParser`, `SsaParser`, `DvbParser` etc)
It will be in the `exoplayer` package, rather than `extractor` and only be used in the decoding flow which happens after SampleQueue (and to be deprecated). When this decoding flow is deprecated and removed, the class can be later deleted.
PiperOrigin-RevId: 546317528
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
Add documentation for threading requirements at the class level (in
addition to existing documentation on the methods) to improve
discoverablility. Also fix a couple of nits in the javadoc (US English
spelling, avoid passive voice) and in `OnInputFrameProcessedListener`.
PiperOrigin-RevId: 546303732
Otherwise, errors like `GL_INVALID_FRAMEBUFFER_OPERATION` will only
report a `null` error string, instead of the proper error string.
PiperOrigin-RevId: 546273328
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may not correctly advance the playback time in the position tracker.
PiperOrigin-RevId: 546011842
When selecting progressive and HLS tracks, we currently check if
we can either seek in the existing samples or are starting from the
beginning of the stream. In both cases, we don't need to reload the
stream and can continue reading.
Seeking to the beginning isn't side-effect free though because it
also sets the startTimeUs to zero. Whether a seek to the beginning
is successful also depends on whether we already loaded a sample or
not. This mean that the startTimeUs value is set (or not set) based
on the speed of the Loader thread even for the same input starting
from the beginning. This race condition means the actual samples
we write to the stream may differ if the stream has initial samples
with negative timestamps.
We can avoid this race condition by checking if the queue is empty
first, so that we only call seekTo if really needed.
PiperOrigin-RevId: 546010951
Robolectric writes warnings to the log output because the Surfaces
we create are not released and pollute the test environment. This
causes performance issues if tests are run repeatedly.
PiperOrigin-RevId: 545906757
We have the optimization to skip buffers if the release time is
exactly the same as the one for the previous buffer. This makes
sense under the assumption that these buffers get released to
a visible Surface and will be ignored anyway.
However, it's also helpful to provide a customization option to not
do this for cases where the outputting MediaCodecAdapter is not
directly talking to a visible Surface or for tests where we can't
fully control the vsync timing of the Surface and want to ensure
we output all samples that are meant to be shown.
PiperOrigin-RevId: 545906113
BaseGlShaderProgram and SingleFrameGlShaderProgram are technically color space agnostic. useHdr is passed to the TexturePool, which only uses the value to choose between high/regular precision. useHdr is therefore a bit misleading and should be generalized to "useHighPrecisionColorComponents."
PiperOrigin-RevId: 545726629
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may accidentally drop output buffers or calculate the wrong values.
PiperOrigin-RevId: 545690008
Based on the spec, ETSI TS 102 366 V1.4.1 Annex F, 6 bits should have skipped instead of 6 bytes.
This correction was pointed out in Issue: androidx/media#474.
PiperOrigin-RevId: 545658365
This allows us to simplify and reduce thread initialization, hops and the
synchronization cost associated with them, especially when more and more VFPs
are used.
PiperOrigin-RevId: 545622169
Upon track transition of offloaded playback of gapless tracks, the framework will reset the playback head position. The AudioTrackPositionTracker must be made to expect the reset and cache accumulated sum of rawPlaybackHeadPosition.
#minor-release
PiperOrigin-RevId: 545602979
This allows MediaSources to accept MediaItem updates after creation.
This CL adds the handling and plumbing logic in `ExoPlayerImpl`,
`ExoPlayerImplInternal`, `MediaSourceList` and `MaskingMediaSource`.
It also updates all forwarding/wrapping sources to forward these calls
to their wrapped instance.
The actual functionality is only added to `FakeMediaSource` instances in
tests so far.
PiperOrigin-RevId: 545450210
This plumbs a duration through `SampleQueue` which will make it easier
to handle transcoding muxed subtitles from e.g. SubRip to
`text/x-exoplayer-cues`.
This change is a no-op to the end-to-end behaviour of ExoPlayer because
currently we only support parsing sideloaded subtitles before
`SampleQueue`, and by adding the duration we don't affect the cues that
are ultimately output by `Player.Listener.onCues` (as shown by no change
to the golden files for `WebvttPlaybackTest` in this commit).
I considered making `CuesWithStartTimeAndDuration` implement
`Bundleable` (and deleting `CueEncoder/Decoder`) but decided against
it because we are deliberately not encoding `startTimeUs` (since that's
encoded as the sample time in `SampleQueue`). I also considered
introducing another type that only has `List<Cue>` and `durationUs`
fields, but it didn't seem necessary, since we want `startTimeUs`
everywhere else (except inside `SampleQueue`).
PiperOrigin-RevId: 545226847
Also make some casting that is needed a bit safer.
Error Prone was complaining about casting `long` to `int` before passing
it to `Extractor.seek(long, long)`:
> Converting a `long` or `Long` to an `int` to pass as a `long`
> parameter is usually not necessary. If this conversion is intentional,
> consider `Longs.constrainToRange()` instead.
PiperOrigin-RevId: 545226063
This is a corollary of `SubtitleDecoderFactory`. We may add a
`boolean supportsFormat(Format)` method later if it turns out to be
useful.
PiperOrigin-RevId: 545225489
The timeout time of 5000ms is quite long, and means that for tests with >1
VFPTestRunner, like texture output and compositor tests, we have to wait 10s.
The latch allows us to continue with the test once we're done processing input,
instead of needing to wait longer, until the timeout is reached.
PiperOrigin-RevId: 545159839
The actual errors are all positive hex values. Without this CL, we must first
convert decimal errors to hex ones before figuring out what went wrong.
PiperOrigin-RevId: 544695961
We introduced truncation to 32 chars in <unknown commit>
and included indent and offset in the calculation. I think this is
technically correct, but it causes problems with the content in
Issue: google/ExoPlayer#11019 and it doesn't seem a problem to only truncate actual
cue text (i.e. ignore offset and indent).
#minor-release
PiperOrigin-RevId: 544677965
This avoids issues with potential number clashes with ID_UNSET.
Also fixes some further parsing where adaptation set ids are referenced
from manifest properties.
Auto-resume playback when the removal of playback suppression due to unsuitable output is conveyed via change in playback suppression to Player.PLAYBACK_SUPPRESSION_REASON_NONE within a configurable timeout defaulting to 5 minutes.
PiperOrigin-RevId: 544411987
Instead of playing or pausing itself, the ExoPlayer implementation should only update the playback suppression reason as and when audio outputs are added or removed dynamically.
PiperOrigin-RevId: 544379033
On a MediaItem change, the input Format (and Effects to apply) may be
different. Therefore the AudioProcessingPipeline must be reconfigured
to determine what processing is active, and what the AudioFormat of the
data output is. In the event that it is different, additional
AudioProcessor instances must be used to ensure the encoder will still
be able to accept the audio buffers.
PiperOrigin-RevId: 544338451
Add a fail-fast check in `ExoPlayerImpl` to ensure the equality of the lengths of `ShuffleOrder` and the current playlist. Also improve the documentation of `setShuffleOrder(ShuffleOrder)` with explicit instruction on this.
Issue: androidx/media#480
#minor-release
PiperOrigin-RevId: 544009359
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
This fixes a broken javadoc link and makes it possible to customize media
source creation via the asset loader factory without also having to
implementing a decoder factory from scratch.
PiperOrigin-RevId: 543995538
It currently wrongly documents that it is only called before reading
streams (that has never been the case and all MediaPeriods already need
to handle calls after reading samples from the streams).
It was also a bit unclear what a discontinuity implies and the new
Javadoc calls out the main use case for discontinuties and the intended
meaning of returning a discontinuity.
#minor-release
PiperOrigin-RevId: 543989124
We use `@Nullable` for IntDefs in other places and don't use this suffix
elsewhere, so I don't think we need it here either.
PiperOrigin-RevId: 543687285
Goal of tests (SequenceExportTest) that use this media is for the
silence and the media to match exactly with audio format, however
`sample_with_increasing_timestamps.mp4` had a different sample rate.
testvid_1022ms.mp4: channel count = 2, sample rate = 44100.
PiperOrigin-RevId: 543458948
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
PiperOrigin-RevId: 543379665
FallbackListener.onTransformationRequestFinalized() is called from the
AssetLoader thread for audio, and from the GL thread for video.
PiperOrigin-RevId: 542851284
By passing this class where it's needed, implementations don't need to store it
in a field (reducing boilerplate) and it's clearer that it can't be unset when
needed.
PiperOrigin-RevId: 542823522
`MediaControllerImplBase` has 2 methods for updating listeners about `PlayerInfo` changes - `updatePlayerInfo` (for masking the state) and `onPlayerInfoChanged` (when communicating with the session). There is a set number of listener callbacks related to `PlayerInfo` updates and both methods should go through the same control flow (whether we know that masking will ignore most of them or not).
A unified method `notifyPlayerInfoListenersWithReasons` encapsulates only the shared logic of 2 methods - listeners' callbacks. This ensures that both methods call them in the same order and none are missed out.
PiperOrigin-RevId: 542587879
With the upcoming "handle format changes" CL, stereo -> mono audio
would add an AudioProcessor. Robolectric decodes output encoded data,
which crashes some AudioProcessors because the number of frames may not
be an integer.
PiperOrigin-RevId: 542568875
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
The callbacks for `PlayerInfo` changes are currently in both `MediaControllerImplBase.updatePlayerInfo` (masking) and `MediaControllerImplBase.onPlayerInfoChanged`. But the order was different between them both and `ExoPlayerImpl.updatePlaybackInfo` which they are trying to mimic.
#minor-release
PiperOrigin-RevId: 542519070
Devices pre-API 33 are not able to comprehend the position reset that occurs by the HAL in offloaded gapless track transitions.
PiperOrigin-RevId: 542503662
The effects pipeline must receive images in the sRGB colorspace due to the color transfers applied in the shaders. Currently the burden to making sure images are in the right colorspaces falls onto apps. This CL ensures that this is not the case anymore.
PiperOrigin-RevId: 542323613
When an app tried to re-prepare a live streeam with server side inserted
ad after a playback exception, the player tried to find the ad group by
its index in the ad playback state of the next timeline when creating
the first period.
If a source that supports server side ad, has removed the ad playback
state when the source has been removed, this causes a crash. For live
streams this is a reasonable thing to do given the exception could be
caused by an invalid ad playback state.
This change removes the ad metadata from the current period for live
streams and the timeline. In case the ad playback state is not reset
by the source, the first timeline refresh would ad the metadata again.
PiperOrigin-RevId: 541959628
Some events may arrive after the playlist is cleared (e.g. load
cancellation). In this case, the DefaultPlaybackSessionManager may
create a new session for the already removed item.
We already have checks in place that ignore events with old
windowSequenceNumbers, but these checks only work if the current
session is set (i.e. the playlist is non-empty). The fix is to add
the same check for empty playlists by keeping note of the last
removed window sequence number.
PiperOrigin-RevId: 541870812
FakeClock currently doesn't work well with Espresso and Compose UI
tests because view interactions in both frameworks intentionally idle
the main looper to handle pending UI effects. However, this also
advances playback progress even though we want to deterministically
trigger progress from the test itself.
To solve this problem, we can detect the idling Robolectric call and
postpone any further updates until we leave this state.
PiperOrigin-RevId: 541831050
Add a Wear OS specific implementation of 'Player.Listener' to help resolving the playback suppression due to unsuitable output by launching a system media output switcher dialog.
PiperOrigin-RevId: 541698125
Audio only tests are now using RAW audio where possible, which is
passed through the Robolectric decoders/encoders, and can be handled by
the AudioProcessor instances accurately.
PiperOrigin-RevId: 541648853
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
Issue: When running the Transformer related test cases, the tests are flaky
because the order in which audio and video samples are interleaved seems to
differ in few instances.
Root cause: When running a transformation the sample producer (Asset loader)
and sample consumer (Sample pipeline) both runs on different thread and
theoretically there is no reason for behaviour to be deterministic because
the number of samples produced/written depends on how fast individual thread
works. So it is indeed surprising that test somehow worked deterministically in
majority of instances (may be something to do with Robolectric environment).
Solution: Since we don't expect the order of sample interleaving to be deterministic, make the dumping logic deterministic where all the video
samples will be collected and then dumped together (similarly for audio). This would mean we won't be able to see the interleaving so for that we need to
add separate test case verifying the interleaving logic only.
Pending: Test case for interleaving.
PiperOrigin-RevId: 540930871
Previously, TextureMangers have a method to signal ending of a current input
stream, and a method to end the **entire input**. The responsibility of both
methods are not easy to document, understand and read.
With the new design,
- Only `TextureManager.signalEndOfCurrentInputStream()` is kept
- It's called for every MediaItem in the sequence, include the final one
- FinalWrapper now takes explicit signal that frame processing is ending,
rather than relying on the return value of `onCurrentInputStreamProcessed()`
- On DVFP receiving EOS from the pipeline, it signals FinalWrapper the stream
is ending, **before** signaling the input switcher, so that FinalWrapper is
able to end the stream when the onCurrentInputStreamEnded signal eventually
reaches FinalWrapper
PiperOrigin-RevId: 540856680
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
Additionally, two existing methods to `buildDataSpec` in `DashUtil` have been deprecated, while a new method has been added that allows the inclusion of `httpRequestHeaders`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540594444
Current behaviour causes an app to crash if it receives an unrecognized repeat mode send over the wire. In order to avoid the crash, a sensible default had to be chosen.
For `Player.RepeatMode`, it is `Player.REPEAT_MODE_OFF`, which is the same value we use as default when unbundling `PlayerInfo`.
For `PlaybackStateCompat.RepeatMode`, it is `PlaybackStateCompat.REPEAT_MODE_NONE`, which is what we use in the no-arg `LegacyPlayerInfo` constructor.
Issue: androidx/media#448
#minor-release
PiperOrigin-RevId: 540563792
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
This helps debug bitmap tests. Without this CL, I typically
need to go into the file to find the test name and absolute
path. With this CL, I can just adb pull the printed file path,
which is much simpler.
PiperOrigin-RevId: 540539042
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
Partially roll forward of 5c29abbbf4, and adds some extra logic
Changes to the original CL
The original logic (a66f08ba97) fails in the following case:
> This is only seem on emulators.
- EOS is sent to ExtTexMgr
- The timer starts
- One frame arrives on SurfaceTexture, reset the timer
- The frame is sent for processing, now `availablFrames == 0`
- One frame arrives on Surface, reset the timer
- The frame is kept on SurfaceTexture for the downstream shader doesn't have
capacity, `availablFrames == 1`
- Timer times out as the downstream processor doesn't report being able to take
another frame.
- Although there's a frame available on the SurfaceTexture
This is solved by having the force EOS logic clear all the frames that the
SurfaceTexture holds. This also ensures the first frame dequeued from the next
stream isn't from the previous stream.
PiperOrigin-RevId: 540023359
Currently, the implementation of `MediaControllerImplBase` differs from `ExoPlayerImpl`. The listeners of the former are notified of player error changes only in `onPlayerInfoChanged` and not `updatePlayerInfo` (masking method). Whereas `ExoPlayerImpl` has one unified method - `updatePlaybackInfo` - which sends the events to all the available listeners.
This change fixes the lack of 2 particular callbacks - `onPlayerErrorChanged` and `onPlayerError`, however, there might be more differences. Ideally, there should be a unified method for oldPlayerInfo/newPlayerInfo comparison-update-notify-listeners flow.
Issue: androidx/media#449
#minor-release
PiperOrigin-RevId: 539961618
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
*** Original commit ***
Add a timer to end a video stream prematurely in ExtTexMgr
***
This has been submitting for more than 1.5hrs. "This presubmit is running slowly because you have been throttled by Build Queue due to using too much of your Product Area's quota."
adding NO_SQ as this is a pure rollback
PiperOrigin-RevId: 539135970
Add `HlsMediaSource.Factory.setTimestampAdjusterInitializationTimeoutMs(long)` to set the timeout for the loading thread to wait for the `TimestampAdjuster` to initialize. If the initialization doesn't complete before the timeout, a `PlaybackException` is thrown to avoid the playback endless stalling. The timeout is set to zero by default.
This can avoid HLS playback endlessly stalls when manifest has missing discontinuities. According to the HLS spec, all variants and renditions have discontinuities at the same points in time. If not, the one with discontinuities will have a new `TimestampAdjuster` not shared by the others. When the loading thread of that variant is waiting for the other threads to initialize the timestamp and hits the timeout, the playback will stall.
Issue: androidx/media#323
#minor-release
PiperOrigin-RevId: 539108886
This change addresses the case when the user joins the live stream
on an ad period but the metadata for the ad period is not emitted.
This results in inserting a partial ad group.
In this case the ad group duration is longer than the partial ad
group. If now the partial ad group ends at the period before the
last period of the window (unknown duration), the splitting algorithm
didn't recognize that the ad group already ended and made the last
period wrongly an ad period.
This change handles this edge case by counting the mapped ads in
the partial ad group to detect this situation and stops splitting.
#minor-release
PiperOrigin-RevId: 539102785
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
When the source is prepared again after stop, the period uid
is calculated by subtracting the `firstPeriodId` from the
period uid that is passed in to `createPeriod`. When this
happens after stop, the uid from the old period uid that
is still stored and has the value of the last played uid.
Hence the `firstPeriodId` must not be reset when released.
Issue: google/ExoPlayer#10838
PiperOrigin-RevId: 539028570
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
This change is for Android 12 and below, where the buttons are derived from the actions added with the notification. From Android 13 (https://developer.android.com/about/versions/13/behavior-changes-13#playback-controls), the system derives media controls from `PlaybackState` actions.
When adding the actions onto the notification, the logic will iterate all the command buttons. The `COMMAND_KEY_CONPACT_VIEW_INDEX` extra will be checked for each button. If that extra is set for the three buttons on the compact view, then the customized buttons and their order will be used. Otherwise, the compact view will be "seekPrev" (if any), "play/pause" (if any), "seekNext" (if any) buttons (in such order).
Issue: androidx/media#410
PiperOrigin-RevId: 538797874
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
The sample timestamp carried by the emsg box can have a significant delta when comparing to the earliest presentation timestamp of the segment. Using this timestamp to intialize the timestamp offset in TimestampAdjuster will cause the media sample to have a wrong adjusted timestamp. So we should defer adjusting the metadata sample timestamp until the TimestampAdjuster is initialized with a real media sample.
PiperOrigin-RevId: 538172841
When initiated by MediaController, it should be possible for `MediaSession` to pass `MediaItems` to the `Player` if they have `LocalConfiguration`. In such case, it is not required to override `MediaSession.Callback.onAddMediaItems`, because the new current default implementation will handle it.
However, in other cases, MediaItem.toBundle() will continue to strip the LocalConfiguration information.
Issue: androidx/media#282
#minor-release
PiperOrigin-RevId: 537993460
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
`outputSurfaceInfoChanged` is not reset when `defaultShaderProgram` is null.
That is, on the first time `ensureConfigured()` is called with output size
changed, `outputSurfaceInfoChanged` is not set to false after creating the
`defaultShaderProgram`, and `defaultShaderProgram` will be created again on the
second time `ensureConfigured()` is called.
PiperOrigin-RevId: 537870404
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
This is a breaking change, but the alternatives seem either equally
breaking or worse, since the only way to make this non-breaking is
to add the `Throwable` overloads as `default` methods. It's then
unclear how we would ever migrate to these being the 'only' methods
or whether we'd have to keep both forms forever (which results in
duplication in the `Logger` implementations).
The clean break here also makes it clear that the `message` parameter
of `Log.Logger.{d,i,w,w}()` no longer automatically includes any info
from the `Throwable` passed to the static `Log.{d,i,w,e}() methods.
----
This CL also cleans up the javadoc on the static `Log.{d,w,i,e}` methods
since they no longer necessarily call straight through to the
corresponding `android.util.Log` methods (and haven't since <unknown commit>
and Issue: google/ExoPlayer#10185).
PiperOrigin-RevId: 537817974
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
