`Tx3gDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Tx3gParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Tx3gParser` instance.
PiperOrigin-RevId: 548144492
Before this CL, the text with a scale span would wrap text, with because the scale wasn't taken into account when measuring the width of the overlay.
PiperOrigin-RevId: 548123626
Unlike ExoPlayer, when play/pause is called on MediaController, the playback suppression reason is set to default causing a change in it and subsequent callbacks on the Player.Listener.
PiperOrigin-RevId: 548088931
Add Ogg ID Header and Comment Header Pages to the Ogg encapsulated Opus for offload playback. This further matches the RFC 7845 spec and provides initialization data to decoders.
PiperOrigin-RevId: 548080222
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of merges where audio or video
is the primary track and where audio, video or both are clipped.
PiperOrigin-RevId: 548061254
These tests allow to verify the samples sent for decoding,
when decoders are reset, which samples are dropped as decode-only
for video and which samples are sent to the AudioTrack for playback.
The test exercises all combinations of clipping transitions for
sources that are either clipped at the start, the end, or both.
PiperOrigin-RevId: 547730824
When a renderer is pre-enabled (while another playback is still
ongoing), we pass mayRenderStartOfStream=false to Renderer.enable.
This ensures we don't show any first frames while the previous media
is still playing.
Currently, we never tell the renderer when we actually stop playing
the previous media so that it could render the start of the stream,
because we allow this as soon as the renderer is in STATE_STARTED and
we assume that we have to be in STATE_STARTED to make this stream
transition.
While this assumption is true, there are also cases where we can't
start the renderers because they are not ready yet and the video
renderer can't become ready because it didn't render its first frame.
This effectively blocks playback forever.
The most direct way of solving this, is to tell the renderer that
playback has transitioned and that it is now allowed to render the
start of the stream. This means it can never get blocked as described
above.
PiperOrigin-RevId: 547727347
SingleInputVideoGraph implements GraphInput now, so the asset loaders would
interface directly with SIVG, rather than VideoSampleExporter. This is to pave
way for multi-asset video processing.
PiperOrigin-RevId: 547561042
The setPlayerCommand and setSessionCommand builder methods contain assertions to ensure that at most one of these fields is set, but this left it possible to create a command button with no command by calling build on an empty builder.
PiperOrigin-RevId: 547488248
This change also marks the buttons of the custom layout as
enabled/disabled according to available commands in the controller.
Accordingly, `CommandButton.Builder.setEnabled(boolean)` is deprecated
because the value is overridden by the library.
Issue: androidx/media#38
#minor-release
PiperOrigin-RevId: 547272588
`Mp4WebvttDecoder` which used to be `SimpleSubtitleDecoder` will now be called `Mp4WebvttParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `Mp4WebvttParser` instance.
PiperOrigin-RevId: 547248157
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
durationUs is almost always going to be a larger number than the sample
rate, so pass as the main value, rather than the multiplier.
PiperOrigin-RevId: 547193927
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
This is needed for several subtitle formats where the `data` passed to
`SubtitleParser` doesn't contain any cue timing, such as PGS, CEA-608,
CEA-708, and DVB.
PiperOrigin-RevId: 547177127
TransformerAndroidTestRunner#run will throw any exception that occurs,
so there is no need to assert the result exception is null.
PiperOrigin-RevId: 546923823
We currently only log the input buffers to the codec, but the test
will be more complete and provide more insights into the playback
behavior if we also dump more information about these input buffers
(timestamps and flags) and also all output buffers with their
timestamps and whether they are rendererd (only relevant for video).
And also use the CapturingAudioSink to output the audio data we produce.
PiperOrigin-RevId: 546898937
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Some adjustments to the test to make it more correct and prevent it
from becoming flaky:
- Use separate output dump files per test setup. Once we add more data
to these files, they are not guaranteed to be the same anymore.
- Use a seek position that is actually behind the midroll as described
in the test setup.
- Change ad insertion position to ensure the ad group duration doesn't
exceed the underlying media duration.
- Add a wait for isLoading to ensure the late insertion of an ad group
happens consistently at the same processing stage.
PiperOrigin-RevId: 546825183
This changes all MediaSources in our library to allow updates to
their MediaItems (if supported).
Issue: google/ExoPlayer#9978
Issue: androidx/media#33
PiperOrigin-RevId: 546808812
This removes some stack traces in unit tests when a
`RemoveMediaController` was created with `waitForConnection=false`
in which case the missing controller in the
`MediaControllerProviderService` caused a `NullPointerException`.
PiperOrigin-RevId: 546795181
`SubripDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SubripParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SubripParser` instance.
PiperOrigin-RevId: 546538113
`SsaDecoder` which used to be `SimpleSubtitleDecoder` will now be called `SsaParser` and implement `SubtitleParser` interface. For backwards compatibility, we will have the same functionality provided by `DelegatingSubtitleDecoder` backed-up by a new `SsaParser` instance.
PiperOrigin-RevId: 546336035
`DelegatingSubtitleDecoder` is a `SimpleSubtitleDecoder` that delegates to a `SubtitleParser` instance (e.g. future implementations like `WebvttParser`, `SubripParser`, `SsaParser`, `DvbParser` etc)
It will be in the `exoplayer` package, rather than `extractor` and only be used in the decoding flow which happens after SampleQueue (and to be deprecated). When this decoding flow is deprecated and removed, the class can be later deleted.
PiperOrigin-RevId: 546317528
Frame buffers are focused, not current. EGL Contexts may be current but this
is a prerequisite for focusing a framebuffer, and this alone isn't
sufficient to make a bitmap.
Clear this up as it can make some complex tests harder to understand, if the
methods needed don't match up in naming.
PiperOrigin-RevId: 546305118
Add documentation for threading requirements at the class level (in
addition to existing documentation on the methods) to improve
discoverablility. Also fix a couple of nits in the javadoc (US English
spelling, avoid passive voice) and in `OnInputFrameProcessedListener`.
PiperOrigin-RevId: 546303732
Otherwise, errors like `GL_INVALID_FRAMEBUFFER_OPERATION` will only
report a `null` error string, instead of the proper error string.
PiperOrigin-RevId: 546273328
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may not correctly advance the playback time in the position tracker.
PiperOrigin-RevId: 546011842
When selecting progressive and HLS tracks, we currently check if
we can either seek in the existing samples or are starting from the
beginning of the stream. In both cases, we don't need to reload the
stream and can continue reading.
Seeking to the beginning isn't side-effect free though because it
also sets the startTimeUs to zero. Whether a seek to the beginning
is successful also depends on whether we already loaded a sample or
not. This mean that the startTimeUs value is set (or not set) based
on the speed of the Loader thread even for the same input starting
from the beginning. This race condition means the actual samples
we write to the stream may differ if the stream has initial samples
with negative timestamps.
We can avoid this race condition by checking if the queue is empty
first, so that we only call seekTo if really needed.
PiperOrigin-RevId: 546010951
Robolectric writes warnings to the log output because the Surfaces
we create are not released and pollute the test environment. This
causes performance issues if tests are run repeatedly.
PiperOrigin-RevId: 545906757
We have the optimization to skip buffers if the release time is
exactly the same as the one for the previous buffer. This makes
sense under the assumption that these buffers get released to
a visible Surface and will be ignored anyway.
However, it's also helpful to provide a customization option to not
do this for cases where the outputting MediaCodecAdapter is not
directly talking to a visible Surface or for tests where we can't
fully control the vsync timing of the Surface and want to ensure
we output all samples that are meant to be shown.
PiperOrigin-RevId: 545906113
BaseGlShaderProgram and SingleFrameGlShaderProgram are technically color space agnostic. useHdr is passed to the TexturePool, which only uses the value to choose between high/regular precision. useHdr is therefore a bit misleading and should be generalized to "useHighPrecisionColorComponents."
PiperOrigin-RevId: 545726629
This makes tests more realistic because the returned value matches
the rest of the simulated test time.
It also prevents test flakiness in (yet to be written) tests that
may accidentally drop output buffers or calculate the wrong values.
PiperOrigin-RevId: 545690008
Based on the spec, ETSI TS 102 366 V1.4.1 Annex F, 6 bits should have skipped instead of 6 bytes.
This correction was pointed out in Issue: androidx/media#474.
PiperOrigin-RevId: 545658365
This allows us to simplify and reduce thread initialization, hops and the
synchronization cost associated with them, especially when more and more VFPs
are used.
PiperOrigin-RevId: 545622169
Upon track transition of offloaded playback of gapless tracks, the framework will reset the playback head position. The AudioTrackPositionTracker must be made to expect the reset and cache accumulated sum of rawPlaybackHeadPosition.
#minor-release
PiperOrigin-RevId: 545602979
This allows MediaSources to accept MediaItem updates after creation.
This CL adds the handling and plumbing logic in `ExoPlayerImpl`,
`ExoPlayerImplInternal`, `MediaSourceList` and `MaskingMediaSource`.
It also updates all forwarding/wrapping sources to forward these calls
to their wrapped instance.
The actual functionality is only added to `FakeMediaSource` instances in
tests so far.
PiperOrigin-RevId: 545450210
This plumbs a duration through `SampleQueue` which will make it easier
to handle transcoding muxed subtitles from e.g. SubRip to
`text/x-exoplayer-cues`.
This change is a no-op to the end-to-end behaviour of ExoPlayer because
currently we only support parsing sideloaded subtitles before
`SampleQueue`, and by adding the duration we don't affect the cues that
are ultimately output by `Player.Listener.onCues` (as shown by no change
to the golden files for `WebvttPlaybackTest` in this commit).
I considered making `CuesWithStartTimeAndDuration` implement
`Bundleable` (and deleting `CueEncoder/Decoder`) but decided against
it because we are deliberately not encoding `startTimeUs` (since that's
encoded as the sample time in `SampleQueue`). I also considered
introducing another type that only has `List<Cue>` and `durationUs`
fields, but it didn't seem necessary, since we want `startTimeUs`
everywhere else (except inside `SampleQueue`).
PiperOrigin-RevId: 545226847
Also make some casting that is needed a bit safer.
Error Prone was complaining about casting `long` to `int` before passing
it to `Extractor.seek(long, long)`:
> Converting a `long` or `Long` to an `int` to pass as a `long`
> parameter is usually not necessary. If this conversion is intentional,
> consider `Longs.constrainToRange()` instead.
PiperOrigin-RevId: 545226063
This is a corollary of `SubtitleDecoderFactory`. We may add a
`boolean supportsFormat(Format)` method later if it turns out to be
useful.
PiperOrigin-RevId: 545225489
The timeout time of 5000ms is quite long, and means that for tests with >1
VFPTestRunner, like texture output and compositor tests, we have to wait 10s.
The latch allows us to continue with the test once we're done processing input,
instead of needing to wait longer, until the timeout is reached.
PiperOrigin-RevId: 545159839
The actual errors are all positive hex values. Without this CL, we must first
convert decimal errors to hex ones before figuring out what went wrong.
PiperOrigin-RevId: 544695961
We introduced truncation to 32 chars in <unknown commit>
and included indent and offset in the calculation. I think this is
technically correct, but it causes problems with the content in
Issue: google/ExoPlayer#11019 and it doesn't seem a problem to only truncate actual
cue text (i.e. ignore offset and indent).
#minor-release
PiperOrigin-RevId: 544677965
This avoids issues with potential number clashes with ID_UNSET.
Also fixes some further parsing where adaptation set ids are referenced
from manifest properties.
Auto-resume playback when the removal of playback suppression due to unsuitable output is conveyed via change in playback suppression to Player.PLAYBACK_SUPPRESSION_REASON_NONE within a configurable timeout defaulting to 5 minutes.
PiperOrigin-RevId: 544411987
Instead of playing or pausing itself, the ExoPlayer implementation should only update the playback suppression reason as and when audio outputs are added or removed dynamically.
PiperOrigin-RevId: 544379033
On a MediaItem change, the input Format (and Effects to apply) may be
different. Therefore the AudioProcessingPipeline must be reconfigured
to determine what processing is active, and what the AudioFormat of the
data output is. In the event that it is different, additional
AudioProcessor instances must be used to ensure the encoder will still
be able to accept the audio buffers.
PiperOrigin-RevId: 544338451
Add a fail-fast check in `ExoPlayerImpl` to ensure the equality of the lengths of `ShuffleOrder` and the current playlist. Also improve the documentation of `setShuffleOrder(ShuffleOrder)` with explicit instruction on this.
Issue: androidx/media#480
#minor-release
PiperOrigin-RevId: 544009359
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
This fixes a broken javadoc link and makes it possible to customize media
source creation via the asset loader factory without also having to
implementing a decoder factory from scratch.
PiperOrigin-RevId: 543995538
It currently wrongly documents that it is only called before reading
streams (that has never been the case and all MediaPeriods already need
to handle calls after reading samples from the streams).
It was also a bit unclear what a discontinuity implies and the new
Javadoc calls out the main use case for discontinuties and the intended
meaning of returning a discontinuity.
#minor-release
PiperOrigin-RevId: 543989124
We use `@Nullable` for IntDefs in other places and don't use this suffix
elsewhere, so I don't think we need it here either.
PiperOrigin-RevId: 543687285
Goal of tests (SequenceExportTest) that use this media is for the
silence and the media to match exactly with audio format, however
`sample_with_increasing_timestamps.mp4` had a different sample rate.
testvid_1022ms.mp4: channel count = 2, sample rate = 44100.
PiperOrigin-RevId: 543458948
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
*** Original commit ***
Mark output sample as decode-only based on start time
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
***
PiperOrigin-RevId: 543379665
FallbackListener.onTransformationRequestFinalized() is called from the
AssetLoader thread for audio, and from the GL thread for video.
PiperOrigin-RevId: 542851284
By passing this class where it's needed, implementations don't need to store it
in a field (reducing boilerplate) and it's clearer that it can't be unset when
needed.
PiperOrigin-RevId: 542823522
`MediaControllerImplBase` has 2 methods for updating listeners about `PlayerInfo` changes - `updatePlayerInfo` (for masking the state) and `onPlayerInfoChanged` (when communicating with the session). There is a set number of listener callbacks related to `PlayerInfo` updates and both methods should go through the same control flow (whether we know that masking will ignore most of them or not).
A unified method `notifyPlayerInfoListenersWithReasons` encapsulates only the shared logic of 2 methods - listeners' callbacks. This ensures that both methods call them in the same order and none are missed out.
PiperOrigin-RevId: 542587879
With the upcoming "handle format changes" CL, stereo -> mono audio
would add an AudioProcessor. Robolectric decodes output encoded data,
which crashes some AudioProcessors because the number of frames may not
be an integer.
PiperOrigin-RevId: 542568875
This change uses this new method everywhere we currently `instanceof`
check an `Extractor` directly. This allows us to introduce
wrapping/delegating `Extractor` instances - because the `instanceof`
checks will continue to operate on the underlying instance.
HLS is a slightly different case, because it directly re-instantiates
`Extractor` instances, which is not compatible with an arbitrary
wrapping structure. Luckily the only `Extractor` instances that HLS
re-instantiates do not support muxed subtitles, so won't be wrapped
in the first place (although future changes might use the
delegating-`Extractor` pattern for other purposes, which might affect
HLS).
PiperOrigin-RevId: 542550928
The callbacks for `PlayerInfo` changes are currently in both `MediaControllerImplBase.updatePlayerInfo` (masking) and `MediaControllerImplBase.onPlayerInfoChanged`. But the order was different between them both and `ExoPlayerImpl.updatePlaybackInfo` which they are trying to mimic.
#minor-release
PiperOrigin-RevId: 542519070
Devices pre-API 33 are not able to comprehend the position reset that occurs by the HAL in offloaded gapless track transitions.
PiperOrigin-RevId: 542503662
The effects pipeline must receive images in the sRGB colorspace due to the color transfers applied in the shaders. Currently the burden to making sure images are in the right colorspaces falls onto apps. This CL ensures that this is not the case anymore.
PiperOrigin-RevId: 542323613
When an app tried to re-prepare a live streeam with server side inserted
ad after a playback exception, the player tried to find the ad group by
its index in the ad playback state of the next timeline when creating
the first period.
If a source that supports server side ad, has removed the ad playback
state when the source has been removed, this causes a crash. For live
streams this is a reasonable thing to do given the exception could be
caused by an invalid ad playback state.
This change removes the ad metadata from the current period for live
streams and the timeline. In case the ad playback state is not reset
by the source, the first timeline refresh would ad the metadata again.
PiperOrigin-RevId: 541959628
Some events may arrive after the playlist is cleared (e.g. load
cancellation). In this case, the DefaultPlaybackSessionManager may
create a new session for the already removed item.
We already have checks in place that ignore events with old
windowSequenceNumbers, but these checks only work if the current
session is set (i.e. the playlist is non-empty). The fix is to add
the same check for empty playlists by keeping note of the last
removed window sequence number.
PiperOrigin-RevId: 541870812
FakeClock currently doesn't work well with Espresso and Compose UI
tests because view interactions in both frameworks intentionally idle
the main looper to handle pending UI effects. However, this also
advances playback progress even though we want to deterministically
trigger progress from the test itself.
To solve this problem, we can detect the idling Robolectric call and
postpone any further updates until we leave this state.
PiperOrigin-RevId: 541831050
Add a Wear OS specific implementation of 'Player.Listener' to help resolving the playback suppression due to unsuitable output by launching a system media output switcher dialog.
PiperOrigin-RevId: 541698125
Audio only tests are now using RAW audio where possible, which is
passed through the Robolectric decoders/encoders, and can be handled by
the AudioProcessor instances accurately.
PiperOrigin-RevId: 541648853
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
Issue: When running the Transformer related test cases, the tests are flaky
because the order in which audio and video samples are interleaved seems to
differ in few instances.
Root cause: When running a transformation the sample producer (Asset loader)
and sample consumer (Sample pipeline) both runs on different thread and
theoretically there is no reason for behaviour to be deterministic because
the number of samples produced/written depends on how fast individual thread
works. So it is indeed surprising that test somehow worked deterministically in
majority of instances (may be something to do with Robolectric environment).
Solution: Since we don't expect the order of sample interleaving to be deterministic, make the dumping logic deterministic where all the video
samples will be collected and then dumped together (similarly for audio). This would mean we won't be able to see the interleaving so for that we need to
add separate test case verifying the interleaving logic only.
Pending: Test case for interleaving.
PiperOrigin-RevId: 540930871
Previously, TextureMangers have a method to signal ending of a current input
stream, and a method to end the **entire input**. The responsibility of both
methods are not easy to document, understand and read.
With the new design,
- Only `TextureManager.signalEndOfCurrentInputStream()` is kept
- It's called for every MediaItem in the sequence, include the final one
- FinalWrapper now takes explicit signal that frame processing is ending,
rather than relying on the return value of `onCurrentInputStreamProcessed()`
- On DVFP receiving EOS from the pipeline, it signals FinalWrapper the stream
is ending, **before** signaling the input switcher, so that FinalWrapper is
able to end the stream when the onCurrentInputStreamEnded signal eventually
reaches FinalWrapper
PiperOrigin-RevId: 540856680
Instead of providing `playbackDurationUs` and `loadPositionUs` individually, which are used to calculate the buffer duration for CMCD logging, we can directly pass the pre-calculated `bufferedDurationUs` available in the `getNextChunk` method of the chunk source classes.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540630112
Additionally, two existing methods to `buildDataSpec` in `DashUtil` have been deprecated, while a new method has been added that allows the inclusion of `httpRequestHeaders`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 540594444
Current behaviour causes an app to crash if it receives an unrecognized repeat mode send over the wire. In order to avoid the crash, a sensible default had to be chosen.
For `Player.RepeatMode`, it is `Player.REPEAT_MODE_OFF`, which is the same value we use as default when unbundling `PlayerInfo`.
For `PlaybackStateCompat.RepeatMode`, it is `PlaybackStateCompat.REPEAT_MODE_NONE`, which is what we use in the no-arg `LegacyPlayerInfo` constructor.
Issue: androidx/media#448
#minor-release
PiperOrigin-RevId: 540563792
The APIs /related fields for playback suppression due to unsuitable output should be renamed from '..SuppressPlaybackWhenNoSuitableOutputAvailable' to '..SuppressPlaybackOnUnsuitableOutput'
PiperOrigin-RevId: 540555715
This helps debug bitmap tests. Without this CL, I typically
need to go into the file to find the test name and absolute
path. With this CL, I can just adb pull the printed file path,
which is much simpler.
PiperOrigin-RevId: 540539042
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
These comments reflect the parameter names of the constructor that
we're reflectively calling, but errorprone complains that they don't
match the parameter names of `Constructor.newInstance`.
PiperOrigin-RevId: 540348118
Previously `AsynchronousMediaCodecCallback.mediaCodecException` was
cleared when flushing completed. This behaviour was changed in
aeff51c507
so now the exception is not cleared.
The result after that commit was that we would **only** suppress/ignore
the expression if a flush was currently pending, and we would throw it
both before and after the flush. This doesn't really make sense, so this
commit changes the behaviour to also throw the exception during the
flush.
This commit also corrects the assertion in
`flush_withPendingError_resetsError` and deflakes it so that it
consistently passes. The previous version of this test, although the
assertion was incorrect, would often pass because the
`dequeueInputBuffer` call would happen while the `flush` was still
pending, so the exception was suppressed.
#minor-release
PiperOrigin-RevId: 540237228
We currently do the same check on the input timestamps and
expect the output timestamps to match. Some codecs produce
samples with modified timestamps and the logic is a lot safer
when the comparison with the start time is done on the output
side of the codec.
Issue: google/ExoPlayer#11000
PiperOrigin-RevId: 540228209
Partially roll forward of 5c29abbbf4, and adds some extra logic
Changes to the original CL
The original logic (a66f08ba97) fails in the following case:
> This is only seem on emulators.
- EOS is sent to ExtTexMgr
- The timer starts
- One frame arrives on SurfaceTexture, reset the timer
- The frame is sent for processing, now `availablFrames == 0`
- One frame arrives on Surface, reset the timer
- The frame is kept on SurfaceTexture for the downstream shader doesn't have
capacity, `availablFrames == 1`
- Timer times out as the downstream processor doesn't report being able to take
another frame.
- Although there's a frame available on the SurfaceTexture
This is solved by having the force EOS logic clear all the frames that the
SurfaceTexture holds. This also ensures the first frame dequeued from the next
stream isn't from the previous stream.
PiperOrigin-RevId: 540023359
Currently, the implementation of `MediaControllerImplBase` differs from `ExoPlayerImpl`. The listeners of the former are notified of player error changes only in `onPlayerInfoChanged` and not `updatePlayerInfo` (masking method). Whereas `ExoPlayerImpl` has one unified method - `updatePlaybackInfo` - which sends the events to all the available listeners.
This change fixes the lack of 2 particular callbacks - `onPlayerErrorChanged` and `onPlayerError`, however, there might be more differences. Ideally, there should be a unified method for oldPlayerInfo/newPlayerInfo comparison-update-notify-listeners flow.
Issue: androidx/media#449
#minor-release
PiperOrigin-RevId: 539961618
The test transcodes four media items with distinct effects, keeping one frame
each; extracts the four frames in the produced video, and compares them against
the expected results.
PiperOrigin-RevId: 539697344
This methods currently registers and queues the bitmaps Will need to have a method that just queues bitmaps in future CLs.
#minor-release
PiperOrigin-RevId: 539605628
With playback suppression in place, the devices can be added when the playback on ExoPlayer is in the suppression state. Also, it is quite possible that a suitable audio output device on which playback is ongoing gets removed requiring the Player to pause the playback. These requirements can be fullfilled using AudioDeviceCallbacks which has been implemented with this change.
PiperOrigin-RevId: 539559193
*** Original commit ***
Add a timer to end a video stream prematurely in ExtTexMgr
***
This has been submitting for more than 1.5hrs. "This presubmit is running slowly because you have been throttled by Build Queue due to using too much of your Product Area's quota."
adding NO_SQ as this is a pure rollback
PiperOrigin-RevId: 539135970
Add `HlsMediaSource.Factory.setTimestampAdjusterInitializationTimeoutMs(long)` to set the timeout for the loading thread to wait for the `TimestampAdjuster` to initialize. If the initialization doesn't complete before the timeout, a `PlaybackException` is thrown to avoid the playback endless stalling. The timeout is set to zero by default.
This can avoid HLS playback endlessly stalls when manifest has missing discontinuities. According to the HLS spec, all variants and renditions have discontinuities at the same points in time. If not, the one with discontinuities will have a new `TimestampAdjuster` not shared by the others. When the loading thread of that variant is waiting for the other threads to initialize the timestamp and hits the timeout, the playback will stall.
Issue: androidx/media#323
#minor-release
PiperOrigin-RevId: 539108886
This change addresses the case when the user joins the live stream
on an ad period but the metadata for the ad period is not emitted.
This results in inserting a partial ad group.
In this case the ad group duration is longer than the partial ad
group. If now the partial ad group ends at the period before the
last period of the window (unknown duration), the splitting algorithm
didn't recognize that the ad group already ended and made the last
period wrongly an ad period.
This change handles this edge case by counting the mapped ads in
the partial ad group to detect this situation and stops splitting.
#minor-release
PiperOrigin-RevId: 539102785
In case the player is reset while a live stream is playing, the current
period needs to be a placeholder. This makes sure that the default start
position is used when the first live timeline arrives after re-preparing.
#minor-release
PiperOrigin-RevId: 539044360
When the source is prepared again after stop, the period uid
is calculated by subtracting the `firstPeriodId` from the
period uid that is passed in to `createPeriod`. When this
happens after stop, the uid from the old period uid that
is still stored and has the value of the last played uid.
Hence the `firstPeriodId` must not be reset when released.
Issue: google/ExoPlayer#10838
PiperOrigin-RevId: 539028570
Add support for including Common Media Client Data (CMCD) in the outgoing requests of adaptive streaming formats DASH, HLS, and SmoothStreaming.
API structure and API methods:
* CMCD logging is disabled by default, use `MediaSource.Factory.setCmcdConfigurationFactory(CmcdConfiguration.Factory cmcdConfigurationFactory)` to enable it.
* All keys are enabled by default, override `CmcdConfiguration.RequestConfig.isKeyAllowed(String key)` to filter out which keys are logged.
* Override `CmcdConfiguration.RequestConfig.getCustomData()` to enable custom key logging.
NOTE: Only the following fields have been implemented: `br`, `bl`, `cid`, `rtp`, and `sid`.
Issue: google/ExoPlayer#8699
#minor-release
PiperOrigin-RevId: 539021056
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
This change is for Android 12 and below, where the buttons are derived from the actions added with the notification. From Android 13 (https://developer.android.com/about/versions/13/behavior-changes-13#playback-controls), the system derives media controls from `PlaybackState` actions.
When adding the actions onto the notification, the logic will iterate all the command buttons. The `COMMAND_KEY_CONPACT_VIEW_INDEX` extra will be checked for each button. If that extra is set for the three buttons on the compact view, then the customized buttons and their order will be used. Otherwise, the compact view will be "seekPrev" (if any), "play/pause" (if any), "seekNext" (if any) buttons (in such order).
Issue: androidx/media#410
PiperOrigin-RevId: 538797874
To ensure no regressions for the potentially confusing pipeline of:
* HDR electrical -> SDR linear EOTF+OOTF, and
* SDR linear -> SDR electrical OETF
PiperOrigin-RevId: 538741079
The sample timestamp carried by the emsg box can have a significant delta when comparing to the earliest presentation timestamp of the segment. Using this timestamp to intialize the timestamp offset in TimestampAdjuster will cause the media sample to have a wrong adjusted timestamp. So we should defer adjusting the metadata sample timestamp until the TimestampAdjuster is initialized with a real media sample.
PiperOrigin-RevId: 538172841
When initiated by MediaController, it should be possible for `MediaSession` to pass `MediaItems` to the `Player` if they have `LocalConfiguration`. In such case, it is not required to override `MediaSession.Callback.onAddMediaItems`, because the new current default implementation will handle it.
However, in other cases, MediaItem.toBundle() will continue to strip the LocalConfiguration information.
Issue: androidx/media#282
#minor-release
PiperOrigin-RevId: 537993460
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
`outputSurfaceInfoChanged` is not reset when `defaultShaderProgram` is null.
That is, on the first time `ensureConfigured()` is called with output size
changed, `outputSurfaceInfoChanged` is not set to false after creating the
`defaultShaderProgram`, and `defaultShaderProgram` will be created again on the
second time `ensureConfigured()` is called.
PiperOrigin-RevId: 537870404
208eefc0fd introduced using `DefaultDecoderFactory.getDecoderInfo(format) != null` caused certain tests not to be skipped when they were expected to be, creating more mh failures.
PiperOrigin-RevId: 537820370
This is a breaking change, but the alternatives seem either equally
breaking or worse, since the only way to make this non-breaking is
to add the `Throwable` overloads as `default` methods. It's then
unclear how we would ever migrate to these being the 'only' methods
or whether we'd have to keep both forms forever (which results in
duplication in the `Logger` implementations).
The clean break here also makes it clear that the `message` parameter
of `Log.Logger.{d,i,w,w}()` no longer automatically includes any info
from the `Throwable` passed to the static `Log.{d,i,w,e}() methods.
----
This CL also cleans up the javadoc on the static `Log.{d,w,i,e}` methods
since they no longer necessarily call straight through to the
corresponding `android.util.Log` methods (and haven't since <unknown commit>
and Issue: google/ExoPlayer#10185).
PiperOrigin-RevId: 537817974
ExoPlayer extractors (backing `MetadataRetriever`) now parse the color format
from the bitstream so using `MetadataRetriever` should be an equivalent but
more lightweight way to verify the color info.
Also remove try/catch blocks in test code calling into these methods, and add
skipping based on decoder capabilities in the cases where it was missing.
PiperOrigin-RevId: 537789483
In some cases the codec selected for decoding has a different MIME type than
the media. In thoses cases Transformer continued to use the media's MIME type
and that caused codec configuration failures.
Removed `EncoderUtil.findCodecForFormat()` as we stopped using the method it
uses for finding a codec. Plus, the method is only used in the test.
See also `MediaCodecUtil.getALternativeCodecMimeType()`.
PiperOrigin-RevId: 536683663
Otherwise, texture output errors out if video decoding decodes faster than audio,
hitting the end of the file, while audio is still in the middle of the file.
PiperOrigin-RevId: 536679568
This future.get() duplicates the wait done in
singleThreadExecutorService.awaitTermination(). If awaitTermination times out, this future.get() would also result in unnecessary blocking.
PiperOrigin-RevId: 536442153
*** Original commit ***
ExoPlayer: Add setVideoFrameProcessorFactory().
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
***
PiperOrigin-RevId: 536391597
Deprecated field `MediaItem.playbackProperties` remains for backwards compatibility, but its type is changed from `MediaItem.PlaybackProperties` to `MediaItem.LocalConfiguration`. The private `MediaItem` constructor will now also take in a `LocalConfiguration` argument instead.
PiperOrigin-RevId: 535648420
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
Also, document that texture output disables manual frame release.
In the past, texture output would lead to surface output methods throwing. Now,
they're simply no-ops instead.
PiperOrigin-RevId: 534894168
When the video renderer is disabled, the video size is set to 0/0
and sent to listeners. The `PlayerView` potentially still has the last frame
displayed when the player is stopped or an error occurs. This may have the
effect that the frame is displayed distorted.
Not changing the aspect ratio when the video size arrives when the player is IDLE
avoids the problem. In the case when playback starts again and the renderes is
enabled, another video size is sent to the listener.
#minor-release
PiperOrigin-RevId: 534860889
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Tentative/experimental value to reduce codec timeouts. We will reconsider using a larger limit after seeing whether this really does reduce error rate.
PiperOrigin-RevId: 534491615
Mp4Muxer already supports writing Mp4LocationData so added that
as supported Metadata entry.
Support for more Metadata entries will be added in upcoming CLs.
PiperOrigin-RevId: 534473866
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
This change deprecates `PlayerView.setUseArtwork(boolean)` and
introduces `setArtworkDisplayMode(mode)` and
`artworkDisplayMode="off|fit|fill"` instead.
- off: no artwork is displayed (like deprecated useArtwork=false)
- fit: letterbox like media (like deprecated useArtwork=true)
- fill: scales the artwork to fill the entire width/weight of the player view
#minor-release
PiperOrigin-RevId: 534167226
Fix a bug when seeking in an opus container. The calculations inside
DefaultOggSeeker may overflow a long primitive.
Issue: androidx/media#391
#minor-release
PiperOrigin-RevId: 534128513
Earlier metadata was written multiple times as it came.
With new changes, all the distinct metadata entries will
get collected and will be written at once in the end.
PiperOrigin-RevId: 534088401
This allows apps to use a custom VideoFrameProcessor implementation for video
playback. This may be useful, for example, when outputting to a texture.
PiperOrigin-RevId: 534044831
This is a follow-up to 99dac0be0f where we made the same change in
ExoPlayerImpl and SimpleBasePlayer, but for consistency it makes
sense to also update the masking code in MediaControllerImplBase to
assume the same logic.
Note: MediaControllerImplLegacy already handles this case via
setMediaItems and doesn't need to be updated further.
#minor-release
PiperOrigin-RevId: 534038759
The methods in ExoPlayerImpl and MediaControllerImplBase that determine
the new PlayerInfo/PlaybackInfo currently have a hard-to-reason-about
setup where the method generating the new info accesses other methods
that rely on the existing class field instead of working with the
passed in PlayerInfo/PlaybackInfo. This prevents reuse of the util
methods (e.g. for replaceMediaItems) because they access potentially
stale state.
This change untangles these methods a bit by making the util methods
either static or at least ensure that they don't rely on existing
class fields of PlayerInfo/PlaybackInfo. Overall, the change is a
complete no-op.
#minor-release
PiperOrigin-RevId: 534036633
MediaControllerImplBase currently drops the pending initial seek
position when a user sets an empty playlist.
When seeking in empty playlists and setting new empty playlists,
the class also drops the the period index (and wrongly assigns zero
instead of the windowIndex).
#minor-release
PiperOrigin-RevId: 534035046
The main interface documentation hasn't been updated substantially
since 2017 and is missing notes for many of its current features and
requirements.
Also change the recommendation for implementors from BasePlayer to
SimpleBasePlayer to ensure new classes are more likely to cover all
of the interface requirements.
#minor-release
PiperOrigin-RevId: 534027117
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This is blocking the upgrade to AGP 8.0.1. The Android Studio Upgrade
Assistant refuses to run with the error:
> Modules have the same package for their `main` and `androidTest`
> artifacts
>
> The package specifications in `AndroidManifest.xml` files define the
> same package for the `main` and `androidTest` artifacts, in the
> following modules: `effect`, `muxer`, `transformer`,
`test_exoplayer_abr`, `test_exoplayer_performance`, and `container`.
This change also adds the `.test` suffix to `test/AndroidManifest.xml`
files where it's missing, because although it's not mentioned in the
Upgrade Assistant error it does cause problems later.
```
> Incorrect package="androidx.media3.database" found in source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
Setting the namespace via the package attribute in the source AndroidManifest.xml is no longer supported.
Recommendation: remove package="androidx.media3.database" from the source AndroidManifest.xml: libraries/database/src/test/AndroidManifest.xml.
```
Issue: androidx/media#409
PiperOrigin-RevId: 533460180
This is useful for cases where only certain types (e.g. only video)
from a source are needed and other tracks should be filtered out
completely to avoid later track selection issues.
#minor-release
PiperOrigin-RevId: 533394658
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 533130932
This device failed on HdrEditingTest's exportAndTranscode_hlg10File_whenHdrEditingUnsupported_toneMapsOrThrows
before this CL, and succeeds on that test after this CL.
PiperOrigin-RevId: 532796897
Have the FinalShaderProgramWrapper / VideoFrameProcessor texture
output access textures provided through a texture pool, that
recycles used textures.
Also, add the TexturePool interface to generally re-use textures.
PiperOrigin-RevId: 532754377
Propagate the "end of current stream" signal directly after queueing the
last frame, instead of waiting for the next onReadyToAcceptInputFrame()
call.
PiperOrigin-RevId: 532739462
Use Kotlin Charsets from the `kotlin.text` package, the `java.nio.charset.StandardCharsets` or the `com.google.common.base.Charsets` instead.
#minor-release
PiperOrigin-RevId: 532469103
Use a non deprecated constructor that includes the option to provide a `channelDescriptionResourceId` parameter.
#minor-release
PiperOrigin-RevId: 532450975
This change enables the IMA extension to play live DASH streams
with DAI support. Samples streams can be found and played in the
main demo app.
Issue: google/ExoPlayer#10912
#minor-release
PiperOrigin-RevId: 532407708
This is a failure only in SSIM, so it seems unlikely we'll prioritize this over
other work or bugs soon. Suppress test failures to reduce triage burden.
PiperOrigin-RevId: 532200729
Use a non-deprecated constructor that accepts additional fields(`cause`, `responseBody`) to enhance error logging.
#minor-release
PiperOrigin-RevId: 532190896
This methods allows to replace single items or a range of items directly
without using separate operations for add and remove. The advantage is
more readable code for apps and the potential for player
implementations to optimize this process (e.g. only replace values
without interrupting playback).
The current change just introduces the API with its default behavior.
The default logic will be removed again in the future in favor of
better logic in the Player implementations.
Issue: google/ExoPlayer#8046
PiperOrigin-RevId: 532151471
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
The periodic updates are only meant to happen while we are in the
same period or ad. This was already guaranteed except for two cases:
1. The Player in a session has updated its state without yet calling
its listeners
2. The session scheduled a PlayerInfo update that hasn't been sent yet
... and in both cases, the following happened:
- The change updated the mediaItemIndex to an index that didn't exist
in a previous Timeline known to the Controller
- One of the period position updates happened to be sent at exactly
this time
This problem can be avoided by only scheduling the update if we are
still in the same period/ad and haven't scheduled a normal PlayerInfo
update already.
Since new MediaControllers may still connect to old sessons with this
bug, we need an equivalent change on the controller side to ignore such
buggy updates.
PiperOrigin-RevId: 532089328
When exporting compositions with multiple images in a row, transformation could
get stuck if a shader was ready to accept input when end-of-stream was already
signaled and queued from upstream. Fix accounting for the downstream capacity.
Manually tested on concatenations with several images and several videos in a
row, by adding logging and verifying the capacity updates as expected across
edited media item transitions.
PiperOrigin-RevId: 532088793
In the past, the SequenceAssetLoader was released in TransformerInternal
when the export ended.
fc539da061 was made to release the SequenceAssetLoader earlier, when
loading ended. This was causing player release timeouts because the last
AssetLoader in the sequence was released before the SamplePipelines (see
0b40bc37ab for more information).
The code that was releasing the SequenceAssetLoader was first commented
out because we didn't have an understanding of what was happening.
This change removes the early SequenceAssetLoader release all together.
It doesn't have any effect as this code was already commented out.
PiperOrigin-RevId: 532065673
The output end-of-stream notification from the last shader could theoretically
arrive before the latch for detecting it is created, which might cause waiting
on the latch indefinitely. Create the latch before signaling end of stream so
that it's guaranteed to be set before the end-of-stream signal arrives.
PiperOrigin-RevId: 532056472
When a `MediaButtonReceiver` is found in the manifest, the library
can implement the contract of SystemUI to signal that the app wants
a playback resumption notification to be displayed.
And, vice versa, if no `MediaButtonReceiver` is in the manifest, the
library will signal to not show the notification after the app has been
terminated.
#minor-release
PiperOrigin-RevId: 531516023
*** Original commit ***
Rollback of 65d5132f76
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
***
PiperOrigin-RevId: 531470081
Until the linked bug is fixed, relax constraints to allow this one device to
pass, to suppress failures and avoid triage toil.
PiperOrigin-RevId: 531259233
An app must only have a single service in the manifest that is either
exposing `MediaLibraryService.SERVICE_INTERFACE` or
`MediaSessionService.SERVICE_INTERFACE`. Hence the component name found by
querying the package manager for a service never returns a different result
when queried again.
The static `MediaSessionImpl.serviceComponentName` can hence be removed
and the package manager queried again when a second session instance
is created.
#minor-release
PiperOrigin-RevId: 531210456
This change adds end-to-end Robolectric playback tests which handle
the scenario the player is playing audio via passthrough and
AudioTrack raises the ERROR_DEAD_OBJECT error upon which the player
attempts to recover by switching to another audio format.
PiperOrigin-RevId: 531180183
The texture input tests in TransformerEndToEndTest were not passing on
Pixel 7. Implemented a fix and fixed other minor threading issues I
spotted while looking at the code.
PiperOrigin-RevId: 531141659
*** Original commit ***
Create InAppMuxer in transformer
To use the InAppMuxer, the client needs to pass InAppMuxer Factory.
***
PiperOrigin-RevId: 531056436
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
The session activity is already sent to the controller with the
`ConnectionState` when it connects. This change adds the ability to update the
activity.
This allows an app to change the intent that is used to open an activity
for the notification. An app is likely to want to change the session activity
just before the session is released. This allows to use a different activity or
more importantly the back stack of the activity for while the app is running
and when used for the playback resumption notification.
PiperOrigin-RevId: 530627102
Exceptions thrown when switching AssetLoader were not reported through
the error listener. Therefore, the resources were not released and the
export was not ending.
PiperOrigin-RevId: 530626300
If tone-mapping was requested for a device supporting HDR encoding,
isToneMapped was false in VideoSamplePipeline.EncoderWrapper. This was
causing the encoder to expect HDR.
Also did some renamings to improve readability
PiperOrigin-RevId: 530584010
similar error to 9baa6f6be5L `registerInputStream` sets the textureManager, so reordering makes sure the textureManager is set before you set the frame info. This is important for texture input, where the frame info provides the width and height.
PiperOrigin-RevId: 530579584
Adding items to an empty playlist is slightly different from adding
items to a non-empty playlist, because the former usually requires to
handle a change in the current item, position and playback state,
while the latter is not expected to affect the current item, position
or state.
The current ExoPlayer and SimpleBasePlayer code doesn't account for
this difference, leading to inconsistent behavior between
setMediaItem(s) and addMediaItem(s) when called on an empty playlist.
PiperOrigin-RevId: 530549928
For DefaultVideoFrameProcessorVideoFrameRenderingTest: `registerInputStream` sets the textureManager, so reordering makes sure the textureManager is set before you set the frame info. This is important for texture input, where the frame info provides the width and height.
PiperOrigin-RevId: 529753404
`VERSION_INT` is quite long with several sections, and it's easy to make
a mistake when updating it - this should help since it checks it against
`VERSION`, which is more easily human readable/writable.
PiperOrigin-RevId: 529747023
Calling LibraryResult.toBundle() could have caused a CastClassException.
This was because when unbundled with UNKNOWN_TYPE_CREATOR.fromBundle(Bundle),
the valueType was set to VALUE_TYPE_ITEM_LIST for all types and the MediaItem
was attempted to be casted to a list.
PiperOrigin-RevId: 529717688
Also change some type parameter names in `MediaSession.BuilderBase`
because `C` now clashes with the import of `androidx.media3.common.C`.
#minor-release
PiperOrigin-RevId: 529665698
The media button has API support with
`Callback.getPlaybackResumption()` that apps need to override to provide
a playlist to resume playback with.
Issue: androidx/media#167
PiperOrigin-RevId: 529495845
* Implement RendererCapabilities.Listener in DefaultTrackSelector.
* Add new methods TrackSelector.invalidateForRendererCapabilitiesChange and TrackSelector.InvalidateListener.onRendererCapabilitiesChanged.
* Add new field allowInvalidateSelectionsOnRendererCapabilitiesChange to DefaultTrackSelector.Parameter to allow opt-in of the renderer capabilities detection feature.
* Add logics of triggering track reselection when renderer capabilities change.
PiperOrigin-RevId: 529067433
When we created androidTests, in the past, they always had a URI pointing to a resource, therefore we always had a URI scheme. With texture input, this will not longer be the case (EditedMediaItems's may have URI.EMPTY, which have a null scheme) so we need to check for this so tests don't falsely fail.
PiperOrigin-RevId: 528848411
The existing logic to drop (actually fail on) 0 sized samples seems no op if
if 2 out of 10 samples are of size 0.
Checked same scenario with MediaMuxer where
1. If input file has 300 samples.
2. Make every 5th sample as an empty byte buffer.
3. Output file is generated without error.
4. Output file has 240 samples.
5. Exoplayer is able to play output file (blurry).
The new change is in line with MediaMuxer behaviour.
PiperOrigin-RevId: 528798046
Systems accepting URIs should treat schemes as case-insensitive
([RFC 3986 Section 3.1](https://www.rfc-editor.org/rfc/rfc3986#section-3.1)):
> An implementation should accept uppercase letters as equivalent to
> lowercase in scheme names (e.g., allow "HTTP" as well as "http") for
> the sake of robustness
PiperOrigin-RevId: 528735287
This means that comments like `//copybara:media3-only` are now detected
(no space between `//` and `copybara`) which will ensure that lines like
this are correctly transformed for the media3 and exoplayer2 GitHub
repos:
aa4e008014/library/effect/build.gradle (L33)
PiperOrigin-RevId: 527919649
Also make FinalShaderProgramWrapper always receive internal texture.
This means it does not sample from a input texture, and its input color is
always linear, hence the input type does not matter.
PiperOrigin-RevId: 527869045
*** Original commit ***
Effect: glFlush instead of glFinish on tex output
This is much faster (~2-3x) than glFlush. While there's a risk that GL commands
queued to the GL server may not be complete by the time non-GL commands access
the texture, this should be unlikely as we only access the texture from GL.
If we see stability issues in the future, we can reconsider and move this back
to glFinish (or GL synchronization mechanisms like fences, which are more
complex)
***
PiperOrigin-RevId: 527848094
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
This is much faster (~2-3x) than glFlush. While there's a risk that GL commands
queued to the GL server may not be complete by the time non-GL commands access
the texture, this should be unlikely as we only access the texture from GL.
PiperOrigin-RevId: 527641520
