This is leftover from the fact that these constants were used
for ExoPlayer renderers only initially, but are now more generally
used to indicate format playback support.
PiperOrigin-RevId: 555951001
`asReadOnlyBuffer` doesn't copy the original byte order but always sets it to big-endian. Replace calls to it with a utility method that manually sets the byte order after creating the read-only copy.
This fixes `TeeAudioProcessor` providing a `ByteBuffer` always in big-endian and hence causing `AudioBufferSink` to read wrong data.
PiperOrigin-RevId: 554861402
This fixes a bug with playing very short audio files, introduced by
fe710871aa
The existing code using floor integer division results in playback never
transitioning to `STATE_ENDED` because at the end of playback for the
short sample clip provided `currentPositionUs=189937`,
`outputSampleRate=16000` and `(189937 * 16000) / 1000000 = 3038.992`,
while `writtenFrames=3039`. This is fixed by using `Util.ceilDivide`
so we return `3039`, which means
`AudioTrackPositionTracker.hasPendingData()` returns `false` (since
`writtenFrames ==
durationUsToFrames(getCurrentPositionUs(/* sourceEnded= */ false))`).
#minor-release
Issue: androidx/media#538
PiperOrigin-RevId: 554481782
We currently only force the first frame if the frame timestamp is
greater than the stream *offset*.
This is wrong for two reasons:
1. The timestamp and the offset are not comparable and it should be
the stream start position.
2. The check should only be applied at stream transitions where we
need to make sure that a new first frame isn't rendered until we
passed the transition point.
We have to fix both issues together, because fixing just issue (1)
causes seeks to before the start position to no longer render the
frame (and playback will be stuck). A new test covers this case.
We also amend the stream transition test case to actually test what it
promises to test and add a test for prerolling samples at the
beginning, to ensure the first frame is still renderered.
Issue: androidx/media#291
PiperOrigin-RevId: 552858967
We currently use 3 different booleans to track the state of the first
frame rendering, which implies that there are 8 distinct possible
overall states. However, this is actually a staged process and there
are only 3 different overall states in the current code. This means
it's clearer and easier to reason about if the variables are combined
to a single state value. Overall, this should be a complete no-op.
State mapping:
- rFFAReset=false, rFFAEnable=false, mayRenderFFAEINS=false
=> FIRST_FRAME_NOT_RENDERED_ONLY_ALLOWED_IF_STARTED
- rFFAReset=false and/or rFFAEnable=false, mayRenderFFAEINS=any
=> FIRST_FRAME_NOT_RENDERED
- rFFAReset=true, rFFAEnable=true, mayRenderFFAEINS=any
=> FIRST_FRAME_RENDERED
PiperOrigin-RevId: 552857802
After this change, every queued bitmap is treated as an individual input stream
(like a new MediaItems).
This change merges the FrameDropTest and FrameDropPixelTest into one (while maintaining all the test cases)
- This is accomplished by generating bitmaps with timestamps on it in FrameDropTest and compare them with goldens (one may call this a pixel test, please lmk if you want this to be renamed)
- The most part of the change comes from DefaultVideoFrameProcessorVideoFrameRenderingTest. The overall working is
- We bypass the input manager
- The TestFrameGenerator generates frames based on timestamps. In this case, we generate frames with timestamps on it
- The generated frame is sent to texture output and in turn saved to bitmaps
- We then compare the generated bitmap with the goldens
PiperOrigin-RevId: 551795770
Instead of `text/x-exoplayer-cues`, we will use `application/x-media3-cues`.
The prefix should be `application` not `text` since the encoded form is arbitrary bytes, not necessarily text. The name should not reference `exoplayer`, since the Media3 Extractors (which are not part of `exoplayer`) produce this format.
PiperOrigin-RevId: 550181852
The main demo app was still targeting API 29 to avoid scoped storage
restrictions. It is now updated to 34 (like the rest of the demo apps)
and handles scoped storage as it should handle it.
More specifically:
- We need to request READ_MEDIA_... permissions instead of
READ_EXTERNAL_STORAGE from API33.
- The legacy scoped storage opt-out can be removed
- READ_MEDIA_... permissions don't allow arbitrary file access
if the file doesn't end in a typical media file extension, so
this change adds a remark on the guide page to place samples
in the app-specific directory.
- We also don't have to request permissions for the app-specific
directories.
- Custom json files can't be placed in arbitray local locations
because they don't end in a media file extension, as there is
no way we can request a permission to load them. This means we
can remove the storage request logic in SampleChooserActivity.
Issue: google/ExoPlayer#6045
PiperOrigin-RevId: 549252474
This ensures the DownloadService stays functional on Android 14
where defining this type is required. On Android 14 and above,
the app also needs to define the DATA_SYNC permission, which is
added to the demo app as well. In the future, this service type
will no longer be supported and DownloadService needs to be
rewritten with another background scheduling framework.
Issue: google/ExoPlayer#11239
PiperOrigin-RevId: 548994842
AudioMixingUtil#mix handles input & output in float or Int16 PCM. Given
Float and Int16 use different sample ratnes, this util handles
conversion between the two, based on the encoding being mixed to.
Migrate AudioMixer to use the util, removing AudioMixingAlgorithm
interface and implementation. ChannelMixingAudioProcessor will be
migrated after additional performance checks.
PiperOrigin-RevId: 548994584
This fixes two things in one go:
1. In order to indicate 'end of a cue' **without** relying on
`CuesWithTiming.durationUs`, `SubripParser` should have been emitting
an empty `List<Cue>` instead of the current behaviour of a
single-item list with `cue.text=""`.
2. There's no need for the empty cue (or cue list), we can use
`durationUs` to indicate the end of each list of cues.
There's no real need to ever have a `Cue` with `text=""`, so also
deprecate `Cue.EMPTY`.
PiperOrigin-RevId: 548938874
`EGL14` was added in API 17, so move all references into the `Api17` wrapper
class. `GLES30` requires API 18.
Remove some defensive calls to check that a context is current. Checking for GL
errors after calls should catch the case of calling GL methods without a
context (which is also only likely to come up early in development), and these
checks were not done consistently across all methods anyway. That allows
removing the API 17 requirement from `SceneRenderer` (where previously it
wasn't documented).
PiperOrigin-RevId: 548669946
* Allow more than one input bitmap at a time.
* Allow Compositor to take in and set up an Executor. Otherwise,
Compositor resources may be created on one thread and accessed on another.
* Add a Compositor TestRunner to reuse test code more.
* Update VideoFrameProcessingTaskExecutor to use a new onError listener, so
that it's more reusable in non-DVFP contexts, like for Compositor.
PiperOrigin-RevId: 547206053
For sync-sample-only formats, we have an optimization to drop all buffers
with less than the start time when writing them to the queue.
For the same formats, if we set a new start time (=seek), we only seek
to the buffer at or before the start time. This means the first sample
in the queue is different depending on whether we seek to a start time
or set a start time and then write samples. This is inconsistent and
effectively means the first sample depends on a race condition between
the Loader thread (writing samples) and the playback thread (attempting
an initial seek in the already loaded samples).
The effect of this inconsistency is that we have to decode one sample
we don't need (and could have skipped) and that some tests become flaky
if the test setup runs into the mentioned race condition.
The fix is to change the SampleQueue seek method to also seek to
a sample at or after the specified time, to align the behavior to the
case where we write the same samples to an empty queue.
The change also clarifies the Javadoc of
MimeTypes.allSamplesAreSyncSamples to note that this should really only
return true if the samples have no "duration" that matters. Otherwise,
we could reasonably return true for most subtitle formats although it
would break subtitle display because we'd remove samples that start
before the seek time.
PiperOrigin-RevId: 547189941
Also parse the PCM encoding for lpcm in MP4, and update `MatroskaExtractor`
similarly.
Tested manually in the demo app using an MP4 with 24-bit big endian audio.
PiperOrigin-RevId: 546878505
Add documentation for threading requirements at the class level (in
addition to existing documentation on the methods) to improve
discoverablility. Also fix a couple of nits in the javadoc (US English
spelling, avoid passive voice) and in `OnInputFrameProcessedListener`.
PiperOrigin-RevId: 546303732
Otherwise, errors like `GL_INVALID_FRAMEBUFFER_OPERATION` will only
report a `null` error string, instead of the proper error string.
PiperOrigin-RevId: 546273328
The actual errors are all positive hex values. Without this CL, we must first
convert decimal errors to hex ones before figuring out what went wrong.
PiperOrigin-RevId: 544695961
We introduced truncation to 32 chars in <unknown commit>
and included indent and offset in the calculation. I think this is
technically correct, but it causes problems with the content in
Issue: google/ExoPlayer#11019 and it doesn't seem a problem to only truncate actual
cue text (i.e. ignore offset and indent).
#minor-release
PiperOrigin-RevId: 544677965
On a MediaItem change, the input Format (and Effects to apply) may be
different. Therefore the AudioProcessingPipeline must be reconfigured
to determine what processing is active, and what the AudioFormat of the
data output is. In the event that it is different, additional
AudioProcessor instances must be used to ensure the encoder will still
be able to accept the audio buffers.
PiperOrigin-RevId: 544338451
Providing the sync token in the api allows the client to decide which waiting method they would like to use depending on the use case, allowing them to optimise if possible.
PiperOrigin-RevId: 543997311
MP4 edit lists sometimes ask to start playback between two samples.
If this happens, we currently change the timestamp of the first
sample to zero to trim it (e.g. to display the first frame for a
slightly shorter period of time). However, we can't do this to audio
samples are they have an inherent duration and trimming them this
way is not possible.
#minor-release
PiperOrigin-RevId: 543420218
By passing this class where it's needed, implementations don't need to store it
in a field (reducing boilerplate) and it's clearer that it can't be unset when
needed.
PiperOrigin-RevId: 542823522
The effects pipeline must receive images in the sRGB colorspace due to the color transfers applied in the shaders. Currently the burden to making sure images are in the right colorspaces falls onto apps. This CL ensures that this is not the case anymore.
PiperOrigin-RevId: 542323613
To more accurately describe what they do, especially as Compositor will
starts to use more contexts or threads, and it's important to know what
needs to be reset/recreated/focused before what methods.
PiperOrigin-RevId: 541010135
*** Original commit ***
Rollback of 2a6f893fba
*** Original commit ***
Set video size to 0/0 when video render is disabled
In terms of MCVR wi...
***
PiperOrigin-RevId: 540525069
The existing NullableType has been deprecated 5 years ago and causes
crashes in Kotlin apps because Kotlin doesn't recognize this annotation
as a nullable type annotation.
While we can't align on a single @Nullable annotation yet, we can at
least replace this one by JSR305's @Nonnull(MAYBE) as it fulfils all
requirements, including full Kotlin compatiblity. To avoid the
cumbersome name, we can redefine it as our own @NullableType
annotation. (We can't use @Nullable to avoid name clashes with the main
@Nullable annotation from AndroidX)
Issue: google/ExoPlayer#6792
PiperOrigin-RevId: 540497469
*** Original commit ***
Add a timer to end a video stream prematurely in ExtTexMgr
***
This has been submitting for more than 1.5hrs. "This presubmit is running slowly because you have been throttled by Build Queue due to using too much of your Product Area's quota."
adding NO_SQ as this is a pure rollback
PiperOrigin-RevId: 539135970
Add `HlsMediaSource.Factory.setTimestampAdjusterInitializationTimeoutMs(long)` to set the timeout for the loading thread to wait for the `TimestampAdjuster` to initialize. If the initialization doesn't complete before the timeout, a `PlaybackException` is thrown to avoid the playback endless stalling. The timeout is set to zero by default.
This can avoid HLS playback endlessly stalls when manifest has missing discontinuities. According to the HLS spec, all variants and renditions have discontinuities at the same points in time. If not, the one with discontinuities will have a new `TimestampAdjuster` not shared by the others. When the loading thread of that variant is waiting for the other threads to initialize the timestamp and hits the timeout, the playback will stall.
Issue: androidx/media#323
#minor-release
PiperOrigin-RevId: 539108886
This CL introduces the new public API setSuppressPlaybackWhenUnsuitableOutput which if set to TRUE will cause suppression of a requested playback if that is going to happen on an unsuitable audio output (e.g. builtin speaker on a WearOS device).
PiperOrigin-RevId: 538867212
The sample timestamp carried by the emsg box can have a significant delta when comparing to the earliest presentation timestamp of the segment. Using this timestamp to intialize the timestamp offset in TimestampAdjuster will cause the media sample to have a wrong adjusted timestamp. So we should defer adjusting the metadata sample timestamp until the TimestampAdjuster is initialized with a real media sample.
PiperOrigin-RevId: 538172841
When initiated by MediaController, it should be possible for `MediaSession` to pass `MediaItems` to the `Player` if they have `LocalConfiguration`. In such case, it is not required to override `MediaSession.Callback.onAddMediaItems`, because the new current default implementation will handle it.
However, in other cases, MediaItem.toBundle() will continue to strip the LocalConfiguration information.
Issue: androidx/media#282
#minor-release
PiperOrigin-RevId: 537993460
*** Original commit ***
BEGIN_PUBLIC
Set video size to 0/0 when video render is disabled
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior
***
PiperOrigin-RevId: 537938947
With `AudioOffloadModePreference` `AUDIO_OFFLOAD_MODE_PREFERENCE_REQUIRED`, the `DefaultTrackSelector` will select a single audio track that it finds is offload compatible. If not any audio track is supported in offload, then no track will be selected.
PiperOrigin-RevId: 537877183
This is a breaking change, but the alternatives seem either equally
breaking or worse, since the only way to make this non-breaking is
to add the `Throwable` overloads as `default` methods. It's then
unclear how we would ever migrate to these being the 'only' methods
or whether we'd have to keep both forms forever (which results in
duplication in the `Logger` implementations).
The clean break here also makes it clear that the `message` parameter
of `Log.Logger.{d,i,w,w}()` no longer automatically includes any info
from the `Throwable` passed to the static `Log.{d,i,w,e}() methods.
----
This CL also cleans up the javadoc on the static `Log.{d,w,i,e}` methods
since they no longer necessarily call straight through to the
corresponding `android.util.Log` methods (and haven't since <unknown commit>
and Issue: google/ExoPlayer#10185).
PiperOrigin-RevId: 537817974
Deprecated field `MediaItem.playbackProperties` remains for backwards compatibility, but its type is changed from `MediaItem.PlaybackProperties` to `MediaItem.LocalConfiguration`. The private `MediaItem` constructor will now also take in a `LocalConfiguration` argument instead.
PiperOrigin-RevId: 535648420
This change moves the default logic into the actual Player
implementations, but does not introduce any behavior changes compared
to addMediaItems+removeMediaItems except to make the updates "atomic"
in ExoPlayerImpl, SimpleBasePlayer and MediaController. It also
provides backwards compatbility for cases where Players don't support
the operation.
Issue: google/ExoPlayer#8046
#minor-release
PiperOrigin-RevId: 534945089
This change removes it from `Player.Listener` and `AnalyticsListener`,
use `onPositionDiscontinuity` with `DISCONTINUITY_REASON_SEEK` instead.
#minor-release
PiperOrigin-RevId: 534757426
Tentative/experimental value to reduce codec timeouts. We will reconsider using a larger limit after seeing whether this really does reduce error rate.
PiperOrigin-RevId: 534491615
Added piping to present offload support from the audio sink to the renderer and track selection. Applications can set offload mode preference and with both sink support and compatible track selection, renderer will be configured for offload.
PiperOrigin-RevId: 534450534
The main interface documentation hasn't been updated substantially
since 2017 and is missing notes for many of its current features and
requirements.
Also change the recommendation for implementors from BasePlayer to
SimpleBasePlayer to ensure new classes are more likely to cover all
of the interface requirements.
#minor-release
PiperOrigin-RevId: 534027117
In terms of MCVR with a `VideoRendererEventListener`, the video size is set to
0/0 right after `onVideoDisabled()` is called and is set to the actual size as
soon as the video size is known after 'onVideoEnabled()`.
For ExoPlayer and in terms of the `Player` interface, `Player.getVideoSize()`
returns a video size of 0/0 when `Player.getCurrentTracks()` does not support
`C.TRACK_TYPE_VIDEO`. This is ensured by the masking behavior of
`ExoPlayerImpl` that sets an empty track selection result when the playing
period changes due to a seek or timeline removal.
When transitioning playback from a video media item to the next, or when
seeking within the same video media item, the renderer is not disabled.
#minor-release
PiperOrigin-RevId: 533479600
Docs:
* https://developer.android.com/build/publish-library/configure-pub-variants#single-pub-var
* https://developer.android.com/reference/tools/gradle-api/8.0/com/android/build/api/dsl/PublishingOptions
This resolves the following warning from Android Gradle Plugin 7.2.2 and
helps unblock the upgrade to AGP 8.0.1:
> Software Components will not be created automatically for Maven
> publishing from Android Gradle Plugin 8.0. To opt-in to the future
> behavior, set the Gradle property
> `android.disableAutomaticComponentCreation=true` in the
> `gradle.properties` file or use the new publishing DSL.
>
> Affected Modules: `lib-cast`, `lib-common`, `lib-container`,
> `lib-database`, `lib-datasource`, `lib-datasource-cronet`,
> `lib-datasource-okhttp`, `lib-datasource-rtmp`, `lib-decoder`,
> `lib-effect`, `lib-exoplayer`, `lib-exoplayer-all (legacy)`,
> `lib-exoplayer-dash`, `lib-exoplayer-hls`, `lib-exoplayer-ima`,
> `lib-exoplayer-rtsp`, `lib-exoplayer-smoothstreaming`,
> `lib-exoplayer-workmanager`, `lib-extractor`, `lib-media2 (legacy)`,
> `lib-mediasession (legacy)`, `lib-muxer`, `lib-session`,
> `lib-transformer`, `lib-ui`, `lib-ui-leanback`, `test-utils`,
> `test-utils-robolectric`
Issue: androidx/media#409
PiperOrigin-RevId: 533464133
This is a pre-requisite for the Android Studio upgrade assistant to
upgrade from AGP 7.2.2 to 8.0.1, otherwise it fails and complains
this is missing.
Issue: androidx/media#409
PiperOrigin-RevId: 533463246
This allows us to avoid needing a reference to the VideoFrameProcessor, which
can be especially difficult if an App only has a reference to the
VideoFrameProcessor.Factory it passes into Transformer/ExoPlayer.
PiperOrigin-RevId: 533205983
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 533130932
Have the FinalShaderProgramWrapper / VideoFrameProcessor texture
output access textures provided through a texture pool, that
recycles used textures.
Also, add the TexturePool interface to generally re-use textures.
PiperOrigin-RevId: 532754377
Use Kotlin Charsets from the `kotlin.text` package, the `java.nio.charset.StandardCharsets` or the `com.google.common.base.Charsets` instead.
#minor-release
PiperOrigin-RevId: 532469103
This methods allows to replace single items or a range of items directly
without using separate operations for add and remove. The advantage is
more readable code for apps and the potential for player
implementations to optimize this process (e.g. only replace values
without interrupting playback).
The current change just introduces the API with its default behavior.
The default logic will be removed again in the future in favor of
better logic in the Player implementations.
Issue: google/ExoPlayer#8046
PiperOrigin-RevId: 532151471
Allow the VideoFrameProcessor to output multiple textures at a time, so that
lifetime of textures is up to the consumer calling VFP.releaseOutputFrame.
The FinalShaderProgramWrapper also has a new maxCapacity limit added, to ensure
the a reasonable amount of textures is used and avoid using up memory.
PiperOrigin-RevId: 532094256
Tone-mapping an HDR video with MediaCodec on sm-s908u1 was timing out.
The reason for that is that the decoder was dropping frames, and the
ExternalTextureManager was therefore never propagating the end-of-stream
signal.
There was already a workaround for a similar issue but restricted to
sm-f936b. Removed the model check as the bug is probably present on more
devices.
PiperOrigin-RevId: 530639437
Adding items to an empty playlist is slightly different from adding
items to a non-empty playlist, because the former usually requires to
handle a change in the current item, position and playback state,
while the latter is not expected to affect the current item, position
or state.
The current ExoPlayer and SimpleBasePlayer code doesn't account for
this difference, leading to inconsistent behavior between
setMediaItem(s) and addMediaItem(s) when called on an empty playlist.
PiperOrigin-RevId: 530549928
`VERSION_INT` is quite long with several sections, and it's easy to make
a mistake when updating it - this should help since it checks it against
`VERSION`, which is more easily human readable/writable.
PiperOrigin-RevId: 529747023
renderOutputFrame actually renders frames to an output surface. We'll soon have
a releaseOutputFrame method, that would release resources associated with an
output time, so rename this to disambiguate the two methods.
Also rename onOutputFrameAvailable to onOutputFrameAvailableForRendering, to
make it clear this is not available for "release"
This change should be a renaming-only change and have no functional differences.
PiperOrigin-RevId: 527844947
Add `VideoFrameProcessor.registerInputStream()` to signal a new type of input.
And `InputHandler.signalEndOfCurrentInputStream()` to signal to `InputHandler`
partial input stream completion.
Fully processed means after FinalShaderProgramWrapper releases the last frame.
PiperOrigin-RevId: 527356646
Allow the VideoFrameProcessor to output to a texture without an output surface.
Tested by updating texture output tests to no longer output to a surface.
PiperOrigin-RevId: 527244605
The production code changes are in transformer, but the tests in effect have also been updated to confirm the is no color regression `inputColorInfo.colorTransfer=C.COLOR_TRANSFER_SRGB`
PiperOrigin-RevId: 526950435
Previously, I assumed that SDR contents must be BT709, and HDR contents must be
BT2020. Turns out BT2020 is just wide-gamut, and SDR contents / transfers may be
represented in BT2020 color spaces.
Relax the check, so that we don't throw when valid BT2020 SMPTE 170M contents
are input into effects.
PiperOrigin-RevId: 526668347
This simplifies the addition of new fields in the future.
Also do some misc clean up for the volume limit values:
- Add some documentation to mention assumed defaults
- Add the IntRange annotations to match the ones we have in Player
already
- Mention the limits in the relevant Player methods
- Avoid bundling default values
- Improve range checks for masking in MediaController
PiperOrigin-RevId: 526029619
Creates a way for apps to provide their EGLContext to DefaultVideoFrameProcessor, so that we can attach their context to the one we create. See [the EGL docs for more information about how contexts are shared in GL](https://registry.khronos.org/EGL/sdk/docs/man/html/eglCreateContext.xhtml)
PiperOrigin-RevId: 525708652
Removes glObjectsProvider from `VideoFrameProcessor` and `Effects`. Apps will set the glObjectsProvider on the DefaultVideoFrameProcessor.Factory.Builder when providing a custom DefaultVideoFrameProcessor.Factory, rather than in `Effects`.
PiperOrigin-RevId: 525169059
This was just for testing and finishing this class is not useful
as it can't wrap an existing MediaPlayer without owning it to
track its state.
PiperOrigin-RevId: 524851654
*** Original commit ***
Fix double initialisation of createIsoLanguageReplacementMap
In the absence of any lock `createIsoLanguageReplacementMap`
method was getting called twice due to race condition.
Used Suppliers.memoize() which is by default thread safe.
***
PiperOrigin-RevId: 524794650
In the absence of any lock `createIsoLanguageReplacementMap`
method was getting called twice due to race condition.
Used Suppliers.memoize() which is by default thread safe.
PiperOrigin-RevId: 524007754
The overrides specified by a MediaController may not use the exact
same TrackGroup instances as known to the Player because the groups
have been bundled to and from the controller. This bundling may
alter the instance slightly depending on the version used on each
side of the communication and the fields set (e.g. Format.metadata
is not supported for bundling).
This issue can be solved by creating unique track group ids for
each group on the session side before bundling. On the way back,
the groups in the track selection parameters can be mapped backed
to their original instances based on this id.
#minor-release
Issue: androidx/media#296
PiperOrigin-RevId: 523986626
Previously, ExoPlayerImpl had volume flags hardcoded to SHOW_UI, but now the developer can choose what happens on volume change. The old methods have been deprecated.
PiperOrigin-RevId: 523974358
The setter command is only used for setPlaylistMetadata and can
be named COMMAND_SET_PLAYLIST_METADATA. The getter commnad is
used to access getMediaMetadata and getPlaylistMetadata and can
be better named COMMAND_GET_METADATA to reflect this usage.
PiperOrigin-RevId: 523673286
Previously `ChannelMixingAudioProcessor` output float because it was
implemented using the audio mixer's float mixing support.
Move the implementation over to just using the `ChannelMixingMatrix` and make
it publicly visible in the common module so it can be used by apps for both
playback and export.
Also resolve a TODO that no longer had a bug attached by implementing support
for putting multiple mixing matrices to handle different input audio channel
counts, and fix some nits in the test code.
Tested via unit tests and manually configuring a `ChannelMixingAudioProcessor`
in the transformer demo app and playing an audio stream that identifies
channels, and verifying that they are remapped as expected.
PiperOrigin-RevId: 523653901
In addition to the changes in 3a5c4277a7
This change essentially reverts 30e5bc9837 (Merged Jul 2022).
From this CL on, `VideoFrameProcessor` takes in non-offset, monotonically
increasing timestamps. For example, with one 5s and one 10s video,
- `VideoFrameProcessor`'s input should start from 0
- On switching to the second video (10s), the timestamp of the first frame in
the second video should be at 5s.
In ExoPlayer however, `streamOffset` is managed differently and thus needs
correction before sending the frames to `VideoFrameProcessor`:
- The timestamp of the first video is offset by a large int, so the first frame
of the first media item has timestamp (assuming) 10000000000000000
- The last frame of the first media item has 10000005000000000
- At this point the stream off set is updated to 10000005000000000
- The pts of the first frame of the second video starts from 0 again.
PiperOrigin-RevId: 523444236
To set the chroma format and depth information for H265 format,the csd-0 data
needs to be parsed. The previous implementation skipped parsing
csd-0 data and hard coded values based on "profile" field in MediaFormat.
Along with above mention changes, corrected some of the comments
as per spec.
PiperOrigin-RevId: 522335595
This ensures that anybody implementing `Player` (which is relatively
unusual) must override at least one `@UnstableApi` method, and therefore
opt-in to the unstable API.
PiperOrigin-RevId: 521769675
The media3-hosted versions of these SVGs were removed due to a change in
the way the reference docs are generated. While work on getting them
hosted on developer.android.com, this change simply links to the
(identical) exoplayer2 versions in order to fix the media3 docs.
#minor-release
PiperOrigin-RevId: 520647905
Also fixed the javadoc link in devsite and removed javadoc links from decoder extensions as it is not published yet on developer.android.com.
#minor-release
PiperOrigin-RevId: 520636868
JaCoCo introduces private synthetic methods (even on interfaces) which
have to be skipped when checking that a 'forwarding' implementation does
forward everything. Instead we can use the existing `getPublicMethods()`
method which implicitly skips these (since they're private).
PiperOrigin-RevId: 519665752
This wasn't added so far because releasing is always allowed from a
MediaController (as it just releases the connection, not the session
player). But Player instances can be created for other purposes and
the receiver of a Player instance should not always be allowed to
call release if it doesn't own the player resource.
PiperOrigin-RevId: 519121122
This change makes sure that live ad periods that are played are
skip when attempted to be added to the queue. To make this work
the existing filter logic had to be take into account the content
resume offset that live periods use.
PiperOrigin-RevId: 518068138
d288891c77 added clearing depth buffers to GLUtil, so there is no need to have allow apps to have a custom clearOutputFrame.
Also removes default implementations in GLObjectsProvider know that these methods have been implemented.
PiperOrigin-RevId: 517156304
[GL documentation for glClear](https://registry.khronos.org/OpenGL-Refpages/gl4/html/glClear.xhtml) says "If a buffer is not present, then a glClear directed at that buffer has no effect." so it's okay to clear the depth buffer even if there isn't one set.
Also manually tested to have no impact when contrast effect and dizzy crop effect form transformer demo was added to image/video input.
PiperOrigin-RevId: 516879598
This change makes sure that the `AdPlaybackState` of any period can
contain an empty postroll placeholder.
The placeholder postroll should be represented in the `MediaPeriodId`
of a content period as `nextAdGroupIndex`, but should be ignored when
building the list of `MediaPeriodInfo` in the `MediaPeriodQueue`. This
is required to allow to add an ad group to ad playback state of the
content period that is currently being played, instantly insert an ad
period into the media period queue and immediately transition playback
to the new period.
This change makes sure and tests that
- a live server side inserted postroll placeholder can be inserted to
a `AdPlaybackState` in well-defined and tested way (helper method)
- a postroll placeholder is NOT ignored when
`AdPlaybackState.getAdGroupIndexAfterPositionUs` is called (this
is required when evaluating the `nextAdGroupIndex`).
- a postroll placeholder is ignored when
`AdPlaybackState.getAdGroupIndexForPositionUs` is called (this is
required to not attempt to play the ad and is analogous to ignore the
post roll placeholder in a single period timeline).
- `MediaPeriod.getFollowingMediaPeriodInfo()` does not include a
`MediaPeriodInfo` for the placeholder postroll when building the
queue.
PiperOrigin-RevId: 515079136
To create this file TextureInfo has been moved to common and renamed to GLTextureInfo.
We'll look to expand the interface in future to cover more of the methods around GL object maintenance in future as required.
PiperOrigin-RevId: 514445397
Before, we used to never call glDeleteFramebuffers, which could
in theory lead to leaks in the number of frame buffers
available and make releasing the GL context more expensive.
PiperOrigin-RevId: 514387847
The `@CallSuper` annotation should help catch cases where subclasses are
calling `delegate.addListener` instead of `super.addListener` but it
will also (unintentionally) prevent subclasses from either completely
no-opping the listener registration, or implementing it themselves in a
very custom way. I think that's probably OK, since these cases are
probably unusual, and they should be able to suppress the warning/error.
Issue: androidx/media#258
#minor-release
PiperOrigin-RevId: 513848402
Protected system broadcasts should not specify the export flag.
Marking them as NOT_EXPORTED breaks sticky broadcasts in some
cases.
Issue: google/ExoPlayer#10970
#minor-release
PiperOrigin-RevId: 512020154
Implement getMediaFormatInteger, a helper method simulating mediaformat.getInteger(name, defaultValue).
This reduces the API 29 restriction from MediaFormatUtil.getColorInfo to API 24, in
particular removing the method-based restriction to a constant-based restriction,
so that we can reduce usage of the API 29 class.
This also allows us to slightly simplify prior use-cases where we'd check
containsKey and getInteger to have a default value.
PiperOrigin-RevId: 511184301
GLEffectsFrameProcessor, MatrixShaderProgram and FinalMatrixShaderProgramWrapper are currently setup to handle the input frames coming from an external input (i.e. a video decoder). Image input is loaded into Bitmap objects at the start of the pipeline, so they are not produced externally. The changes provide a way for the frame processing pipeline to handle this "internal" (i.e. non-external) input.
PiperOrigin-RevId: 508645244
Based on [this conversation thread](https://chat.google.com/room/AAAA--f88ao/76Rem_cRCK8), I've opted to update the existing FrameProcessor.create() rather than deprecate it, as it is unlikely to be in use by apps outside google3.
PiperOrigin-RevId: 506920930
Flushing resets all the texture processors within the `FrameProcessor`. This
includes:
- At the back, the FinalMatrixTextureProcessorWrapper, and its MatrixTextureProcessor
- At the front, the ExternalTextureManager
- All the texture processors in between
- All the ChainingGlTextureProcessorListeners in between texture processors
- All the internal states in the aforementioned components
The flush process follows the order, from `GlEffectsFrameProcessor.flush()`
1. Flush the `FrameProcessingTaskExecutor`, so that after it returns, all tasks queued before calling `flush()` completes
2. Post to `FrameProcessingTaskExecutor`, to flush the `FinalMatrixTextureProcessorWrapper`
3. Flushing the `FinalMatrixTextureProcessorWrapper` will propagate flushing through, via the `ChainingGlTextureProcessorListener`
Startblock:
has LGTM from christosts
and then
add reviewer andrewlewis
PiperOrigin-RevId: 506296469
This is confusing, since the effect is used not only when applying an effect, but also when preparing an effect (ex. in a texture processor's constructor), so we should also mention that case.
PiperOrigin-RevId: 504843598
This makes it implicitly clear that if the value of a getter changes due
to a change in command availability then the listener will be invoked,
without needing to explicitly document every command on every listener
method.
#minor-release
PiperOrigin-RevId: 503178383
We currently only document it for the getCurrentMediaItem(), but
the command was always meant to cover all information about the
current media item and the position therein.
To correctly hide information for controllers, we need to filter
the Timeline when bundling the PlayerInfo class if only this
command is available.
PiperOrigin-RevId: 503098124
When bundling PlayerInfo, we need to remove information if the
controller is not allowed to access it. This was only partially
done at the moment.
PiperOrigin-RevId: 502852798
When bundling PlayerInfo, we remove data when the controller is not
allowed to access this data via getters. We also remove data for
performance reasons. In the toBundle() method, it's currently hard to
make the connection between allowed commands and filtering, because
the values are checked at a different place. This can be made more
readable by forwarding the applicable Commands directly.
The only functional fix is to filter the Timeline when sending the
first PlayerInfo after a connecting a controller if the command to
get the Timeline is not available. This also allows us to remove a
path to filter MediaItems from Timelines as it isn't used.
PiperOrigin-RevId: 502607391
This CL includes following changes:
1. Remove GCA related terms/links from java docs and comments.
2. Make class final where ever possible.
3. Append /* package */ for default classes.
4. Change java docs to recommended format.
5. Replace term "packet" with "sample" to avoid confusion.
6. Correct TODO format.
7. Delete MediaFormatUtil.java from muxer module and add its methods into MediaFormatUtil.java in common module.
Note: The java doc on various boxes has the limited description which was already present. In future I am planning to add proper small description for each box (from MP4 spec).
Not included in this CL:
1. Order of element correction as it will show lot of changes and might create confusion with other minor changes.
2. Correction in test cases (Only some renaming).
PiperOrigin-RevId: 502414139
This is needed for constrained multi-asset to shift the timestamps of
the media items that are not the first in the sequence.
PiperOrigin-RevId: 502409923
This should make debugging much easier as values will be more human-readable.
Before this CL, one needed to reference MediaFormatUtil to check the
colorSpace/colorTransfer/colorRange values and make sure values were as
expected.
PiperOrigin-RevId: 502367147
The migration strategy is to deprecate `androidx.media3.session.BitmapLoader` and copy the file into common since BitmapLoader is a public interface that apps could be relying on.
PiperOrigin-RevId: 501266521
The FrameProcessor is created on the GL thread, but:
- setInputFrameInfo() is currently called from the playback thread.
- release() is currently called from the transformer internal thread.
PiperOrigin-RevId: 501035719
Initialising the fields as Integer and then getting a String on compute time is slow. Instead we directly initialise these fields as String. Improves the time taken in bundling PlayerInfo further to less than 200ms from ~300ms.
Also modified a test to improve productive coverage.
PiperOrigin-RevId: 500003935
Improves the time taken to construct playerInfo from its bundle from ~400 ms to ~300 ms.
Also made `Timeline.Window.toBundle(boolean excludeMediaItem)` public as it was required to assert a condition in tests.
PiperOrigin-RevId: 499512353
Added another check in each of these tests to make sure we don't add keys to bundle for fields with default values.
Also fixed comments of similar changes in `AdPlaybackStateTest` and `MediaMetadataTest`.
PiperOrigin-RevId: 499463581
Did not do this optimisation for `AdPlaybackState.AdGroup` as its length is zero for `AdPlaybackState` with no ads.
No need to pass default values while fetching keys, which we always set in `AdPlaybackState.AdGroup.toBundle()`.
PiperOrigin-RevId: 496995048
Users of this class may run into these assertions when creating the
State and they need to check the source code to understand why
the State is invalid. Adding error messages to all our correctness
assertions helps to understand the root cause more easily.
PiperOrigin-RevId: 496875109
These are the remaining setter operations. They all share the same
logic that handles playlist and/or position changes. The logic to
create the placeholder state is mostly copied from ExoPlayerImpl's
maskTimelineAndPosition and getPeriodPositonUsAfterTimelineChanged.
PiperOrigin-RevId: 496364712
FrameProcessor already support using different transfer function for input and
output color. This CL has two major changes:
- Create an eglSurface that recognizes BT.2020 PQ
- This requires a separate extension that works only after 33
- So we current throw, if input is HDR, and this extension doesn't work
- Create FrameProcessor with PQ output transfer function
PiperOrigin-RevId: 496023758
Some Player methods operate relative to existing indices in the
playlist (add,remove,move,seek). As these operations may be issued
from a place with a stale playlist (e.g. a controller that sends
a command while the playlist is changing), we have to handle out-
of-bounds indices gracefully. In most cases this is already
documented and implemented correctly. However, some cases are not
documented and the existing player implementations don't handle
these cases consistently (or in some cases not even correctly).
PiperOrigin-RevId: 495856295
The `MediaItem` instances in the following cases are not actually empty but acts as a placeholder. `EMPTY_MEDIA_ITEM` can also be confused with `MediaItem.EMPTY`.
PiperOrigin-RevId: 495843012
Improves the time taken to construct `playerInfo` from its bundle from ~450 ms to ~400 ms. Each `MediaItem` inside `Timeline.Window` contains `MediaMetadata` and hence is a good candidate for bundling optimisations. There already exists a test to check all parameters for null values when unset.
PiperOrigin-RevId: 495614719
This simplifies some position tracking needs for an app implementing
SimpleBasePlayer.
- The period index can always be derived from the media item index
and the position. So there is no need to set it separately.
- The media item index can be left unset in the State in case the app
doesn't care about the value or wants to set it the default start
index (e.g. while the playlist is still empty where UNSET is
different from zero).
- Similarly, we should allow to set the content position (and buffered
position) to C.TIME_UNSET to let the app ignore it or indicate the
default position explictly.
PiperOrigin-RevId: 495352633
isLoading is not allowed to be true when IDLE, so we have to set to
false when stopping in case it was set to true before.
PiperOrigin-RevId: 494975405
BasePlayer simplifies implementations by handling all the various
seek methods and forwarding to a single method that can then be
implemented by subclasses. However, this loses the information about
the concrete entry point used for seeking, which is relevant when
the subclass wants to verify or filter by Player.Command. This
can be improved by adding the command as a new parameter. Since
we have to change the method anyway, we can also incorporate the
boolean flag about whether the current item is repeated to avoid
the separate method.
PiperOrigin-RevId: 494948094
- Use a single `VideoSize` instance instead of four primitive fields.
- Clarify that the reported size is the decoded size, that is the encoded video
size.
PiperOrigin-RevId: 494148190
Some Player methods like getting the Looper and adding listeners
were always allowed to be called from any thread, but this is
undocumented. This change makes the threading rules of these
methods more explicit.
Removing listeners was never meant to be called from another thread
and we also don't support it safely because final callbacks may
be triggered from the wrong thread. To find potential issues, we
can assert the correct thread when releasing listeners.
Finally, there is a potential race condition when calling addListener
from a different thread at the same time as release, which may lead to
a registered listener that could receive callbacks after the player is
released.
PiperOrigin-RevId: 493843981
The folder type has a mix of information about the item. It shows
whether the item is browsable (type != FOLDER_TYPE_NONE) and
which Bluetooth folder type to set for legacy session information.
It's a lot clearer to split this into a boolean isBrowsable and
use the existing mediaType to map back to the bluetooth folder type
where required.
folderType is not marked as deprecated yet as this would be an API
change, which will be done later.
PiperOrigin-RevId: 493544589
This adds support for the release handling. To align with the
established behavior in ExoPlayer, the player can only call
listeners from within the release methods (and not afterwards)
and automatically enforces an IDLE state (without listener call)
in case getters of the player are used after release.
PiperOrigin-RevId: 493543958
Modify FrameProcessor and MatrixTextureProcessor interfaces to support
different input and output color transfers. Does not implement conversion between
color ranges (ex. HDR and SDR), but should allow for conversion between color
transfers of the same color range (ex. HLG and PQ).
This supports in-app tone mapping, where we need a single FrameProcessor to
input HDR color transfers (ex. HLG/PQ) and output SDR (ex. gamma2.2). This also
supports previewing, where we need a single FrameProcessor to be able to input HLG
and output PQ.
Manually tested by confirming colors still look right on SDR and HDR videos
with a rotation and color affect applied.
PiperOrigin-RevId: 493108678
From this CL on, FrameProcessor listeners will be invoked from an Executor that
is passed in when creating the FrameProcessor.
GlTextureProcessor needs to invoke the ErrorListener on the said Executor too.
PiperOrigin-RevId: 493018583
These have the same value (`-1`), and basically the same meaning (offset
in an array/list/file/byte stream/etc), but 'position' is an overloaded
term in a media playback library, and there's a risk people assume that
methods like `Player.getCurrentPosition()` may return
`C.POSITION_UNSET`, when in fact unset media times (whether duration or
position) are always represented by `C.TIME_UNSET` which is a) a `long`
(not `int`) and b) a different underlying value. (aside:
`getCurrentPosition()` never returns an unset value, but it's a good
example of the ambiguity of the word 'position' between 'byte offset'
and 'media timestamp'.)
PiperOrigin-RevId: 492493102
In some cases we split a test method, and in other cases we just add
line breaks to make the separation between arrange/act/assert more
clear.
PiperOrigin-RevId: 492182769
This adds the forwarding logic for most setters in SimpleExoPlayer
in the same style as the existing logic for setPlayWhenReady.
This change doesn't implement the setters for modifying media items,
seeking and releasing yet as they require additional handling that
goes beyond the repeated implementation pattern in this change.
PiperOrigin-RevId: 492124399
This better matches the terminology we use elsewhere in the Player
interface, where items inside the playlist are referred to as
"media item" and only the entire list is called "playlist".
PiperOrigin-RevId: 491882849
To support OPUS offload, we need to provide a few configuration values
that are currently not set due to the lack of devices supporting
OPUS offload.
PiperOrigin-RevId: 491613716
This is more clear than using Format.NO_VALUE, when we do actually intend for an
output value.
Also, fix @see formatting by using summary fragments instead, and add an error
output for OETF and EOTF transfer functions.
PiperOrigin-RevId: 490910229
This change includes a change in the `IMediaController.aidl` file and needs
to provide backwards compatibility for when a client connects that is of an older or
newer version of the current service implementation.
This CL proposes to create a new AIDL method `onPlayerInfoChangedWithExtensions`
that is easier to extend in the future because it does use an `Bundle` rather than
primitives. A `Bundle` can be changed in a backward/forwards compatible way
in case we need further changes.
The compatibility handling is provided in `MediaSessionStub` and `MediaControllerStub`. The approach is not based on specific AIDL/Binder features but implemented fully in application code.
Issue: androidx/media#102
#minor-release
PiperOrigin-RevId: 490483068
If there is output data available (outputBuffer.hasRemaining()), then
there is no need to move other data between the underlying processors.
It will not change the buffer being returned by that call to getOutput.
If there is no output data readily available, it's necessary to go to
the AudioProcessors and pass buffers between them, as this may produce
data for output.
PiperOrigin-RevId: 490482653
Previously, FrameProcessor never had the usecase in which the output surface
is replaced, while previewing introduced this usecase.
When switching output surfaces, we need to destroy the EGL Surface linked to the
surface that is being swapped out, because an EGL surface is linked to the EGL
display (which is not destroyed even when releasing FrameProcessor).
A GL exception will be thrown in the following scenario if we don't destroy the
EGL surface:
1. Creates a Surface, the surface is identified by address 0x11
2. Sets Surface(0x11) on FrameProcessor. Eventually an EGL surface is created
to wrap Surface(0x11)
3. Release FrameProcess, this releases the EGL context
4. Instantiate a new FrameProcessor, sets Surface(0x11) as the output
5. When FrameProcessor creates an EGL surface to wrap Surface(0x11), GL throws
an exception, becasue Surface(0x11) has previouly been connected to an EGL
surface.
PiperOrigin-RevId: 489590072
This adds the full Builders and State representation needed to
implement all Player getter methods and listener invocations.
PiperOrigin-RevId: 489503319
Util.getAudioTrackChannelConfig() maps a channel count to a
channel mask that is passed to AudioTrack. The method expected that
playback of 8-channel audio is possible from Android 5.1 and playback of
12-channel audio is only possible from Android 12L. However, there is no
restriction on the upper number of channels that can be passed to the
AudioTrack. google/ExoPlayer#10701 is an example where the audio decoder
outputs 12 channels on an Android 10.
This change removes the restrictions for 8 and 12 channels. Note, we still
do not support playback of arbitrary number of channels as it would require
further changes to DefaultAudioSink.
#minor-release
Issue: google/ExoPlayer#10701
PiperOrigin-RevId: 488659831
When we currently trigger the iteration finished event during the
release, we don't mark the event as triggered. This means that
someone can trigger another release from within the callback,
which then tries to resend the event.
Issue: google/ExoPlayer#10758
#minor-release
PiperOrigin-RevId: 488645089
Split inner interface into separate file, which will go in common
module. The old interface will be deprecated and extends the new.
#cleanup
PiperOrigin-RevId: 483732226
Make it easier to support use of RGBA_101012 rather than RGBA_8888 for EGL
contexts, displays, and surfaces.
This tangentially supports adding HDR tests, by slightly simplifying the color
selection logic we'd have to add in HDR tests.
PiperOrigin-RevId: 482219428
Currently, repeating the same item (via seekNext/Previous) implicitly
results in a seek to the default position of the current item, which
looks exactly the same as a direct seek. As a result, we don't send
onMediaItemTransition as we would for every other seekNext/Previous
call.
This can be fixed by explicitly marking the repeat case in the internal
BasePlayer/ExoPlayerImpl methods, so that the callback can be triggered.
Issue: google/ExoPlayer#10667
PiperOrigin-RevId: 481951788
Currently, a frame is dropped if it's requested release time is in the past.
This mode was added to support previewing. However, in normal ExoPlayer
playback, slightly late frames (<30ms late) are also rendered. On MediaCodec
side, this means calling `releaseOutputBuffer` with a release time in the
past.
PiperOrigin-RevId: 479615291
This mode is supported by using `C.TIME_UNSET` (which is a negative value). The
new logic decouples the value of `C.TIME_UNSET` and the frame dropping
behaviour.
PiperOrigin-RevId: 479368880
Currently `FrameProcessor.releaseOutputFrame()` method supports
Release at a specific system time
Drops the frame
This API is not that convenient to use when the caller wants to release a frame, now, regardless of the release time. A use case is to release (present) a frame when no frame is shown for a while, and it's thus better to just release the frame, now.
Currently if MCVR wants a frame to be rendered now, MCVR calls release frame with a set offset like 10us: `releaseOutputFrame(System.nanoTime() + 10_000)`. The 10us offset is to prevent the frame processor dropping the frame, due to thread hopping delays.
To make the API better usable, consider adding a mode for releasing the frame now, like (bold marks the new mode)
- Use C.TIME_UNSET to drop
- **Use -1 to release the frame immediately, or**
- Use an actual release time.
PiperOrigin-RevId: 479044215
A follow up to stopping speaker playback with a Player decorator from
https://github.com/androidx/media/issues/15.
It looks like we will need to change to using playback suppression to avoid
errors like https://github.com/androidx/media/issues/167, when we don't start
a foreground service.
We may not have this implemented by 1.0, but would like it in the API and it seems to be appropriate.
PiperOrigin-RevId: 478835686
"Final" was likely added to reference the FinalMatrixTextureProcessorWrapper,
which is a package-private class. However, I think more clear to express that
this is the input size, which then has all effects applied, to get the output
size.
PiperOrigin-RevId: 477975358
* Before this CL, the texture was stored during the construction of the LUT processor. This failed since if one creates a list of GlEffects on the application thread, the texture will get stored in the application thread during the effect creation and not on the GL thread, which executes the FrameProcessors.
* This is an issue since the executing thread then can't index from the texture stored on a different thread.
PiperOrigin-RevId: 476388021
The stream offset is used to calculate the presentation time of
a metadata object when reading and later when playing, to calculate
the current presentation time to decide whether to send the metadata
to the output.
Accordingly, the presentation time of a pending metadata that has been
calculated with a given offset needs to be recalculated when the
stream offset changes.
#minor-release
PiperOrigin-RevId: 472499943
In particular, make it a bit more clear that "rendering" and "releasing" frames are
related concepts, and how they differ from one another in conjunction with frame
dropping.
PiperOrigin-RevId: 471037733
Use the PQ OETF and EOTF to ensure that intermediate fragment shader operations
using PQ are in linear BT.2020 rather than PQ and HLG-1 BT.2020.
Also, swap the OETF and EOTF in shaders, as they were used incorrectly before
Manually tested by verifying transformer demo HLG and PQ videos look the same with and without this CL, including with a BitmapOverlayProcessor enabled to test flows both with one MatrixTransformationProcessor that skips HDR TFs, and with one that doesn't.
PiperOrigin-RevId: 469736067
Adds a method to FrameProcessor.Listener to be called when an
output frame is available and a method releaseOutputFrame in
FrameProcessor allowing the caller to trigger release of the
oldest available output frame at a given timestamp. Late frames
or frames with unset release times are dropped in the
FinalMatrixTransformationProcessorWrapper.
More than one output frame can become available before they are
released if the penultimate GlTextureProcessor is capable of producing
multiple output frames. Processing continues while waiting for
releaseOutputFrame to be called. Frame release tasks are prioritized
over other tasks.
PiperOrigin-RevId: 468473072
We create an empty CueGroup in many places as default or
where none is needed. Instead, we can define a constant
for this purpose and reuse it.
PiperOrigin-RevId: 467944841
This base class will simplify the implementation of custom
Player classes. The current version only supports
available commands and playWhenReady handling.
PiperOrigin-RevId: 467618021
While HDR is most closely tied to the color transfer (ex.
COLOR_TRANSFER_SDR is the only one explicitly mentioning dynamic
range), technically color spaces may be associated with HDR as well,
like BT.2020 commonly being used for HDR rather than BT.709 for SDR.
Therefore, it's more specific to mention just that the transfer is HDR.
PiperOrigin-RevId: 466316960
This allows the GlEffectsFrameProcessor to later handle HLG and PQ
differently, or limited and full color range differently.
No functional change intended in this CL.
PiperOrigin-RevId: 466070764
Format.NO_VALUE is a placeholder value for an invalid @C.ColorTransfer, used
for example when the decoder doesn't support this transfer function.
When encountering this invalid value, interpret this as COLOR_TRANSFER_SDR.
Confirmed locally that an exception is thrown when transcoding on p4head, and no exception is thrown when transcoding with this CL.
PiperOrigin-RevId: 464135080
This will allow effects preview in ExoPlayer to use the
Effect and FrameProcessor interface (and the interfaces
they depend on) without depending on transformer or the
future effects module.
PiperOrigin-RevId: 464060047
* Sets KEY_HDR_STATIC_INFO from MediaFormat in the DefaultCodec.
* Adds checks in mediaparser to ensure color space, range, and transfer are valid
values.
PiperOrigin-RevId: 463921325
This adds two methods that are helpful when working with Futures.
One is a version of postOrRun that can indicate completion by a
Future and the other is a simplified version of Guava's
Futures.transformAsync (which can't be used as it's in Beta).
PiperOrigin-RevId: 461896598
This will help developers self-diagnose issues like Issue: google/ExoPlayer#10392
where the NPE occurs far from the original null value because a field
gets assigned to null.
This change aims to ensure that every stable method on Player,
ExoPlayer and ExoPlayer.Builder that takes a non-null type will fail
with an NPE before returning.
#minor-release
PiperOrigin-RevId: 461846580
* Introduced `useHdr` for `GlEffect#toGlTextureProcessor`, so
`TextureProcessor` implementations can decide how to handle HDR.
* Creating FP16 color textures for HDR input.
Tested via manual testing, adding a no-op GlEffectWrapper to the transformation to
force use of intermediate textures, adding a linear ramp to the fragment shader,
and trying to ascertain that there's a real reduction in posterization when
switching from 4-bit to 8-bit unsigned bytes, and again from 8-bit unsigned bytes
to 16-bit floating point.
PiperOrigin-RevId: 461613117
I don't think it's useful to keep these in numerical order, it makes
more sense to keep them grouped into a 'logical' ordering.
#minor-release
PiperOrigin-RevId: 460453464
This extension is needed for editing HDR input with OpenGL, as the
ExternalTextureProcessor samples raw YUV values from the
external texture for HDR and converts them to RGB itself rather than
relying on the OpenGL driver to do this automatically as for SDR.
PiperOrigin-RevId: 460424154
The SDR constant also specified a color space and range, in addition to
C.COLOR_TRANSFER_SDR. However, it turns out that SDR videos may use different color
space and range values, so following prior ExoPlayer conventions to have `null`
mean "generic SDR" is preferable here.
PiperOrigin-RevId: 459296746
If the input is HDR (HLG), check encoder capabilities for HDR support
and request tone-mapping to SDR during decoder configuration otherwise.
Capabilities are only checked for API 31 and above, as HDR editing is
not supported before.
As the encoder capabilities check needs to happen before selecting the
encoder to use (as this may depend on the resolution output by the
effects chain), the EncoderWrapper checks all candidate encoders
for the MIME type for HDR capabilities and only requests fallback to
SDR if none of them support it.
When the actual encoder is selected, the wrapper checks that it matches
one of the encoders is checked capabilities for.
PiperOrigin-RevId: 458511599
Configure the GL shaders and encoder to take in HDR metadata.
This mostly just consists of passing the Format.colorInfo through
the VideoTranscodingSamplePipeline down to the encoder, rather than passing
the PQ-ness down to the GL step.
Due to b/237674316, this will remove HDR10+ support temporarily to introduce
support for HLG10.
Manually tested to confirm that HLG10 operations that don't affect color display
correctly after this CL with "HDR editing" in the demo checked, and continue to display incorrectly (as before this CL) without the option unchecked.
PiperOrigin-RevId: 458490810
Previously two timelines that differed only in shuffle order were
considered equal, which resulted in no call to
Player.Listener.onTimelineChanged when calling
ExoPlayer.setShuffleOrder. This in turn resulted in no call to
MediaControllerCompat.Callback.onQueueChanged.
Also make a small fix inside ExoPlayerImpl.setShuffleOrder, to ensure
that the new shuffle order is used when constructing the masked
timeline.
Issue: google/ExoPlayer#9889
#minor-release
PiperOrigin-RevId: 457703727
The native GL errors are in an arbitrary order according to
https://www.khronos.org/registry/OpenGL-Refpages/es2.0/xhtml/glGetError.xml
This means any of them could contain the most useful message
so it's better to use all for the GlException's message rather than
picking the last message and logging all others.
PiperOrigin-RevId: 454130460
Transformer always enabled glAssertionsEnabled, so there should
be no functional change.
ExoPlayer previously disabled glAssertionsEnabled, so GlUtil logged
GlExceptions instead of throwing them. The GlExceptions are now
caught and logged by the callers so that there should also be no
functional change overall.
This change also replaces EGLSurfaceTexture#GlException with
GlUtil#GlException.
PiperOrigin-RevId: 453963741
Some Player implementations have no playlist capability but can still
set a MediaItem for playback. Examples are a MediaController connected
to a legacy MediaSession, ExoPlayer up to 2.12 or MediaPlayer.
To indicate this capability, we need an allowed command in addition
to COMMAND_CHANGE_MEDIA_ITEMS that just allows to set a single item
that replaces everything that is currently played.
#minor-release
PiperOrigin-RevId: 453879626
SingleFrameGlTextureProcessor is now an abstract class containing a
default implementation of the more flexible GlTextureProcessor interface
while still exposing the same simple abstract methods for single frame
processing it previously did.
FrameProcessorChain and GlEffect will be changed to use
GlTextureProcessor in follow-ups.
PiperOrigin-RevId: 453633000
The current setup with distinct, private `keyForField` implementations,
leaves open the (theoretical) possibility of a clash in the `Bundle`
keys used by the superclass and subclass. This change brings
consistency with our only other extensible `Bundleable` type
(`PlaybackException`).
#minor-release
PiperOrigin-RevId: 453385875
We generally nest the `Builder` for `Foo` inside `Foo`. In this case,
there's already a `DefaultTrackSelector.Parameters.Builder` type visible
to a developer, it just happens to be the 'common'
`TrackSelectorParameters.Builder`, so using it is a bit weird. For
example this code snippet doesn't compile because
`DefaultTrackSelector.Parameters.Builder#build()` returns
`TrackSelectionParameters`. This CL fixes that problem and the code
snippet now compiles.
```java
DefaultTrackSelector.Parameters params =
new DefaultTrackSelector.Parameters.Builder(context).build()
```
#minor-release
PiperOrigin-RevId: 453215702
This is done by removing the `@FieldNumber` IntDef completely. It's not
really adding much value anyway, because it's `open` so there's no real
enforcement to prevent passing 'incorrect' values.
#minor-release
PiperOrigin-RevId: 452108972
This value only existed to allow setting media URLs from external sources
(e.g. in a MediaController) so that a player can start playing this item.
Now that we have MediaItem.RequestMetadata.mediaUrl we can remove this value
from MediaMetadata because it's request metadata, not media metadata.
PiperOrigin-RevId: 451857413
These fields can be used to transport additional request properties
when the requester doesn't know the details needed for the actual
playback (i.e. the LocalConfiguration).
PiperOrigin-RevId: 451857093
* Rename (via deprecation)
`MediaItem.DrmConfiguration.Builder#forceSessionsForAudioAndVideoTracks`
to `setForceSessionsForAudioAndVideoTracks`. This is more consistent
with existing 'force' method names both in this class and in
`TrackSelectionParameters.Builder`.
* Add missing `@Nullable` annotation to the parameter for
`MediaItem.SubtitleConfiguration.Builder#setMimeType`. This annotation
is already present on the `MediaItem.SubtitleConfiguration#mimeType`
field that this setter corresponds to.
PiperOrigin-RevId: 450941336
This value is only needed by subclasses of `Rating`, all of which are
in this package (the `Rating` constructor is already package-private to
ensure this).
PiperOrigin-RevId: 450886872
This detection relies on an unsupported workaround and may trigger
permission warnings in tools analyzing permission usage although
no permission is needed or requested by app code.
Given the majority of 5G-NSA playbacks are on API 31+ by now,
we can remove this path to avoid the permission confusion and the
unsupported detection workaround.
PiperOrigin-RevId: 450382586
We need to pass timestamp for the list of cues so we are defining a new class CueGroup which will store both cues and timestamp.
PiperOrigin-RevId: 449212054
The MMWAVE constant was deprecated in favour of a new constant
with a better name. Thus, we need to check for both constants now.
PiperOrigin-RevId: 449018959
This is an individual language (ISO 639-3) part of the Arabic
macrolanguage ("ar" in ISO 639-1). Add this mapping to our
existing list similar to other individual to macrolanguage
mappings we have already.
Issue: Issue: google/ExoPlayer#10255
PiperOrigin-RevId: 448911950
When using a MatrixTransformationFrameProcessor per transformation
matrix, each frame processor's shader applies the matrix to the
vertices and clips the result to the NDC range when drawing the
output frame.
This change combines consecutive MatrixTransformations into a single
MatrixTransformationFrameProcessor by multiplying the individual
matrices while updating and clipping the visible polygon after
each matrix and mapping the resulting visible polygon back to the
input space so that its vertices and the combined transformation
matrix can be used in the shader.
PiperOrigin-RevId: 448521068
This listener replaces
FrameProcessorChain#getAndRethrowBackgroundExceptions.
The listener uses a new exception type FrameProcessingException
separate from TransformationException as the frame processing
components will be made reusable outside of transformer soon.
PiperOrigin-RevId: 447455746
This constant is used for https://docs.gl/es2/glVertexAttribPointer
which takes the number of components per generic vertex attribute
(meaning the size of the individual coordinate vectors here) not the
number of attributes (the number of vertices that the old constant
name referred to).
PiperOrigin-RevId: 447427241
Some APIs from Android 12L were used either via reflection or
constants values were hard-coded. We can now use these APIs directly
since we upgraded the compile SDK version to 32.
PiperOrigin-RevId: 446167543
This is consistent with the IntDef name, and frees up the CONTENT_TYPE_
prefix for the @ContentType values (which are currently just TYPE_*,
and therefore ambiguous with lots of other 'type' values in C).
PiperOrigin-RevId: 445356476
This method was introduced in e414f0d2ac
as a replacement for Util.inferContentType(String) but it incorrectly
didn't return TYPE_SS when passed "ism" or "isml".
PiperOrigin-RevId: 445217167
This fixes some small niggles:
1. `inferContentType(String)` is documented to take a path, but in the
tests we're passing full URIs.
2. A `String` parameter is usually a path, but also a MIME type or an
extension. In the new methods, the meaning of a `String` parameter
is always clear from the name of the method.
3. `inferContentType(String)` is always passed an extension in
'production' code (which has to be manually prefixed with a dot).
4. `inferContentType(Uri, @Nullable String)` always ignores the Uri if
the String is non-null. IMO this logic is clearer to a reader if it's
just in-lined at the call-site.
These methods are used from the demo apps, so will be part of the stable
API.
PiperOrigin-RevId: 444826053
The DefaultMediaNotificationProvider checks if a command is available
before putting the respective action in the notification.
PiperOrigin-RevId: 440114422
PeriodicDimmingFrameProcessor is an example of how a custom fragment
shader can be used to apply color changes that change over time.
PiperOrigin-RevId: 439840609
App code should get all of this information from TrackGroupInfo,
and should only need TrackGroup as a key to use for overrides.
PiperOrigin-RevId: 438840925
This provides better compatibility with MediaExtractor, which does read these fields; we also need them for being able to mux file contents into another mp4 file.
Also, there is a minor refactor included so that we have an actual type for esds box contents instead of a pair.
PiperOrigin-RevId: 438673825
The placeholder surface is either EGL_NO_SURFACE or a 1x1 pbuffer
depending on whether the device supports EGL_KHR_surfaceless_context.
PiperOrigin-RevId: 438541846
This is basically 'container' and 'subtitle' MIME types
I previously avoided stabilising any 'custom' MIME types (those
containing '/x-') but it certainly seems reasonable to expect
developers to use APPLICATION_M3U8 and so then it also makes sense
to stabilise other 'similar' custom MIME types too.
PiperOrigin-RevId: 438501642
This requires an additional nanos to micros conversion because
the SurfaceTexture uses nanos. But as the timestamps from the
MediaCodec decoder (propagated in DefaultCodec#releaseOutputBuffer) are
in microseconds no precision is lost here.
Also add test that checks output video duration.
PiperOrigin-RevId: 438010490
* The AdvancedFrameProcessor calls use() in updateProgramAndDraw().
* The AdvancedFrameProcessor has the same input and output dimensions.
PiperOrigin-RevId: 437231350
