Sources (for example media projection) can populate the `Surface` from
`SurfaceAssetLoader` with timestamps that don't start from zero. But
`MuxerWrapper` assumes the latest sample timestamp can be used as the duration
when it calculates average bitrate and notifies its listener.
This can cause a crash because the calculated average bitrate can be zero if
the denominator duration is large enough.
Use the max minus first sample timestamp across tracks instead to get the
duration.
Side note: the large timestamps from the surface texture when using media
projection arrive unchanged (apart from conversion from ns to us) in effect
implementations and in the muxer wrapper (and are passed to the underlying
muxer). The outputs of media3 muxer and the framework muxer are similar.
PiperOrigin-RevId: 652422674
This should have no influence on app behavior and other policies
and just allows code to depend on new API 35 platform symbols.
PiperOrigin-RevId: 652414026
We currently use displaySurface == placeholderSurface IF codec != null
as a signal that the codec is configured with a placeholder. In the
future, this placeholder might not be needed and we can decouple this
state a bit better by leaving displaySurface == null in this case and
only using placeholderSurface instead of null when setting a Surface
to the codec.
PiperOrigin-RevId: 652391729
All other AndroidX libraries have already increased their min SDK to
21.
This change renames private symbols to remove `V21` suffixes and
similar, but doesn't change public or protected symbols with similar
names, to avoid needless breakages/churn on users of the library.
Some of the dead code removal is more complex, so I've split it out
into follow-up changes to make it easier to review.
PiperOrigin-RevId: 651776556
Also promote all H.265 constants to be public in `NalUnitUtil` with
`H265_` prefixes, for consistency.
A lot of these names are used in h.265 too (and `NalUnitUtil` handles
both), but with different values, so this rename aims to avoid
accidentally using an h.264 value in an h.265 context.
PiperOrigin-RevId: 651774188
MediaCodecRenderer might not be able to determine whether a sample
is last in time. Do not use decoder input skipping optimization
for buffers close to media end duration in order to ensure
last frame is rendered.
PiperOrigin-RevId: 651757814
This is because the force EOS workaround for videos is longer than the original
muxer timeout. This way the apps depending on Transformer won't have to manually
set the muxer timeout on emulators.
PiperOrigin-RevId: 651355755
The integration with `SubtitleTranscodingExtractorOutput` has been
moved inside the relevant `Extractor` implementations instead.
PiperOrigin-RevId: 651213564
When testing locally it seemed that upgrading KGP to `1.9.20` resolved
this, but testing again confirms this was incorrect, so the problem
was reintroduced in 00d1e70a34.
This change reverts back to KGP `1.9.0` (since upgrading didn't help)
and instead implements the workaround suggested in
https://issuetracker.google.com/278545487. The workaround is now in
the `lib-common` `build.gradle` file, which is transitively depended
on by all modules (and therefore all apps that use this library), so
there's no need for any developer action, and so the release note is
removed.
Issue: androidx/media#1262
PiperOrigin-RevId: 651066418
VideoSink.registerInputFrame is now called for every input frame (not
only the ones that should be rendered to the input surface) because it's
the VideoSink that decides whether it wants the frame to be rendered.
PiperOrigin-RevId: 651049851
In order for DASH playback to benefit from
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES, the fMP4 extractor flag
must be set. The smallest API change that allows this is to add an
experimental method to BundledChunkExtractor.
Add a dash end-to-end test to verify that video frames are skipped at
decoder input.
PiperOrigin-RevId: 651046676
As reported in Issue: androidx/media#1493 we already use `HEADSETHOOK` to start
waiting for a double-tap, but we don't consider it for the second tap.
Similarly, we previously considered `PLAY` for the second tap, but not the first.
Only `HEADSETHOOK` and `PLAY_PAUSE` are
[documented](https://developer.android.com/reference/androidx/media3/session/MediaSession#media-key-events-mapping)
to transform double-tap to `seekToNext`. So this change removes the
`PLAY` detection from the second tap.
#cherrypick
PiperOrigin-RevId: 651017522
Stereo view information is stored in the 3D reference displays information SEI and the optional vexu box. Parsing of the SEI and vexu box is added, and based on the parsed info, proper mapping of primary/secondary view to left/right eye is determined.
PiperOrigin-RevId: 651002190
Add support for MPEG4 codec to enable muxing video encoded with the mp4v-es codec. Use esdsBox method to generate esds box required for Mp4v box.
PiperOrigin-RevId: 651000744
Some external media files have CodecSpecificData greater than 128 bytes. Currently, that size
isn't fitting in one byte. Hence, added support to store large CodecSpecificDataSize, as per
ISO standard, by extending to more than one byte as required.
PiperOrigin-RevId: 650972472
The operation almost always acquires resources straight-away,
for example a new thread or file access. This means starting
many metadata retrievals in parallel easily causes resource
contention. This problem can be alleviated by limiting the
maximum number of parallel retrievals.
Local testing showed a 20% speedup for local file retrievals
when limited to 5 in parallel. Any more parallel retrievals
did not show any improvement or started getting slower again
the more operations are allowed.
PiperOrigin-RevId: 650674685
MetadataRetriever is often used in a loop to retrieve data about many
items in a directory for example. In such cases, it's wasteful to
start a new 'playback' thread for each retrieval, in particular since
this thread is doing almost nothing (just triggering loads and handling
events). This change re-uses an existing thread if one exists already.
PiperOrigin-RevId: 650633343
During a seek, or when playing a media with clipped start,
MCVR encounters preroll decode-only buffers that are not rendered.
Use C.BUFFER_FLAG_NO_OTHER_SAMPLE_DEPENDS_ON_THIS to determine
whether a decode-only buffer is unused as reference.
These buffers can be dropped before the decoder.
When this optimization is triggered, increment
decoderCounters.skippedInputBufferCount.
Tested in ExoPlayer demo app on "One hour frame counter (MP4)"
after enabling extractorsFactory.setMp4ExtractorFlags(
FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES);
Observe: "sib" increases on each seek.
PiperOrigin-RevId: 650566216
Changes to FragmentedMp4Extractor to parse additional sample dependency
information and mark output samples as "no other samples depend on this".
Only applies to H.264 tracks.
Controlled by new fMP4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 650538377
The idea was to not even write any samples to SampleQueues as
they are not needed during the metadata extraction process.
However, this is not easily possible as long as we use our
existing Extractors and MediaSource/Periods for loading given
how deeply ingrained the extraction of samples is in these
classes. For most common formats like MP4, no samples will be
extracted anyway as they can finish the prepare step without
reading any samples.
PiperOrigin-RevId: 650529371
Leb128 is a little-endian long of variable byte length. The format is used during the extraction of the size of the OBU configuration for the iacb configuration box.
PiperOrigin-RevId: 650295002
Once a service is started as a foreground service, it must
be started into the foreground. This means an app can not
suppress a play command arriving from the `MediaButtonReceiver`
once the receiver has started the service.
This change adds a method to the `MediaButtonReceiver` that
allows app to suppress starting the service to not get into
this situation of wanting to suppress the play command after
the service is already started.
Issue: androidx/media#1528
PiperOrigin-RevId: 650280025
Upon the call of `PreloadMediaSource.preload`, the source will periodically check the source refresh or period loading error, and trigger `PreloadMediaSource.PreloadControl.onPreloadError`. For now, the `DefaultPreloadManager` will skip the problematic source and continue to preload the next source. The checking of the error will be terminated when the source stops preloading or releases.
PiperOrigin-RevId: 650195817
This utility helps apps to forward to another Player while overriding
selected behavior or state values. The advantage to a ForwardingPlayer
is that the SimpleBasePlayer base class keeps ensuring correctness,
listener handling etc.
The default forwarding logic tries to stay as close as possible to the
original method calls, even if not strictly required by the Player
interface (e.g. calling single item addMediaItem instead of
addMediaItems if only one item is added).
Issue: androidx/media#1183
PiperOrigin-RevId: 650155924
Since the muxer supported only AAC audio codec, the esdsBox was unconditionally created within the audioSampleEntry. This CL refactors the box creation logic by moving it to the codecSpecificBox method. This is to make adding support for new audio codecs easier.
PiperOrigin-RevId: 650130935
The Timeline, Tracks and MediaMetadata are currently provided
with a list of MediaItemData objects, that are a declarative
version of these classes. This works well for cases where
SimpleBasePlayer is used for external systems or custom players
that don't have a Timeline object available already. However,
this makes it really hard to provide the data if the app already
has a Timeline, currently requiring to convert it back and forth
to a list of MediaItemData.
This change adds an override for `State.Builder.setPlaylist`
that allows to set these 3 objects directly without going
through MediaItemData. The conversion only happens when needed
(e.g. when modifying the playlist).
PiperOrigin-RevId: 649667983
The value is basically a duplicate of the information stored
in the timeline field. Reducing the source of truth to the
single Timeline also allows acceptance of other Timelines in the
future that don't necessarily have the helper structure of
the playlist.
To allow apps to retrieve the current playlist as it is, we
add a getter instead.
PiperOrigin-RevId: 649667281
Changes to Mp4Extractor to parse additional sample dependency information
and mark output samples as "no other sample depend on this".
Only applies to H.264 tracks.
Controlled by new mp4 flag: FLAG_READ_WITHIN_GOP_SAMPLE_DEPENDENCIES
PiperOrigin-RevId: 649640184
The percentage should be interpreted as relative to the size of a parent
node.
This change makes this inheritance work correctly for percentages in
both the parent and child. It does not fix the case of a non-percentage
parent size with a percentage child size.
PiperOrigin-RevId: 649631055
This is a new `DataSource` that can be used to read from a `FileDescriptor`.
Limitations:
- The provided file descriptor must be seekable via lseek.
- There's no way to duplicate a file descriptor with an independent position (it
would be necessary instead for the app to provide a new FD). Therefore this
implementation will only work if there's one open data source for a given file
descriptor at a time.
PiperOrigin-RevId: 649443584
Parse LHEVCDecoderConfigurationRecord with the ‘lhvC’ type and set the corresponding sample mime type to video/mv-hevc. With no MV-HEVC decoder available, fallback to single-layer HEVC decoding.
PiperOrigin-RevId: 649119173
The VideoSink has an input and an output surface. Clarify which surface
the Javadoc is referring to. Also document that the VideoSink can be fed
with images, and that multiple renderers can feed the same sink.
PiperOrigin-RevId: 649052551
MCVR crashed because MCVR registers a new input stream to VideoSink on every
`onOutputFormatChanged()`, assuming that `onOutputFormatChanged()` is only
invoked on media item transition. However, it can be called multiple times for
one media item.
PiperOrigin-RevId: 649050576
Hardware decoder on some devices fails to write 1920x1080 YUV_420_888 buffers into an ImageReader. This change allows us to remove skipCalculateSsim device workaround in ExportTest.java.
VideoDecodingWrapper now uses media3.MediaExtractorCompat: necessary for parsing of MediaFormat#KEY_CODECS_STRING and decoder capabilities check
PiperOrigin-RevId: 648726721
Lint somehow complains that the integer resulting from the bit-manipulation shouldn't be passed as an @IntDef parameter.
#cherrypick
PiperOrigin-RevId: 648687698
Deprecate `setInputDefaultBufferSize` and `setRequireRegisteringAllInputFrames`
as the new input stream type replaces these (as far as we know they are always
used together).
This is in preparation for supporting asset loaders signaling that they require
these features, specifically for recording from a surface.
PiperOrigin-RevId: 648686087
This is required before we can move CEA-6/708 parsing from the rendering
side of the sample queue to the extraction side.
This re-ordering is needed for video encodings with different decoder
and presentation orders, because the CEA-6/708 data is attached to each
frame and needs to be processed in presentation order instead of decode
order. This change re-orders frames within a group-of-pictures, but also
takes advantage of `maxNumReorderFrames/Pics` values to cap the size of
the re-ordering queue, allowing caption data to be released 'earlier'
than the end of a GoP.
Annex D of the CEA-708 spec (which also applies for CEA-608 embedded in
SEI messages), makes the need to re-order from decode to presentation
order clear.
PiperOrigin-RevId: 648648002
This change extends the error replication to a given set of
error codes (not only authentication error), but only
replicates an error if the caller of the service `Callback`
is a legacy controller. It also makes error replication
configurable so that apps can opt-out and report errors
manually instead, or define the error codes for which
replication is enabled.
The change also removes the restriction of `sendError` only
being available for Media3 controllers. Instead, sending an
error to a legacy controller updates the platform playback
state in the same way as sending the error to the media
notification controller.
#cherrypick
PiperOrigin-RevId: 648399237
Add the following NAL unit parsing utility functions that will be needed for the MV-HEVC support as proposed in Apple's HEVC stereo video interoperability profile:
- NAL unit header parsing to get the layer information needed for MV-HEVC support.
- VPS parsing, including vps_extension() needed for MV-HEVC support.
- SPS parsing modifications to support MV-HEVC.
PiperOrigin-RevId: 647329211
Upon track transition of offloaded playback of gapless tracks, the framework will reset the audiotrack frame position. The `AudioTrackPositionTracker`'s `AudioTimestampPoller` must be made to expect the reset and cache accumulated sum of `AudioTimestamp.framePosition`.
#cherrypick
PiperOrigin-RevId: 647294360
When handling a playback error that originates from a future item in
the playlist, we added support for jumping to that item first,
ensuring the errors 'happen' for the right 'current item'.
See 79b688ef30.
However, when we add this new position discontinuity to the
playback state, there may already be other position discontinuities
pending from other parts of the code that executed before the
error. As we can't control that in this case (because it's part
of a generic try/catch block), we need to send any pending
updates first before handling the new change.
Issue: androidx/media#1483
#cherrypick
PiperOrigin-RevId: 646968309
Setting a `null` value doesn't remove the key as expected per the `MediaFormat` API documentation, using the `removeKey` method instead which is only available starting API level 29.
PiperOrigin-RevId: 646462402
ExoPlayer used to call `stop()` before `release()`. This was removed in
<unknown commit>.
A framework bug introduced in Android 11 (API 30) resulted in some
DRM -> clear transitions failing during `MediaCodec.configure()`. An
investigation in Issue: google/ExoPlayer#8696 and b/191966399 identified that this was
due to `release()` returning 'too early' and the subsequent
`configure()` call was then trying to re-use a `Surface` that hadn't
been fully detached from the previous codec. This was fixed in
Android 13 (API 33) with http://r.android.com/2094347.
ExoPlayer worked around the framework bug by adding an arbitrary 50ms
sleep after a failed codec initialization, followed by retrying. This
was enough to resolve the problem in the test scenario on a OnePlus
AC2003.
Issue: androidx/media#1497 points out that 50ms might not be the appropriate delay
for all devices, so it's an incomplete fix. They suggested re-adding the
`MediaCodec.stop()` call instead. This also reliably resolves the issue
on the OnePlus AC2003 (with neither workaround in place, the problem
repros almost immediately).
PiperOrigin-RevId: 646461943
Extractors should not report additional tracks once they called
ExtractorOutput.endTracks. This causes thread safety issues in
ProgressiveMediaPeriod where the array of sample queues is
extended while the playback thread accesses the arrays.
Detecting this problem early is beneficial to avoid unexplained
exceptions later one. In most cases where this may happen (namely
TS extractors finding new tracks), it's better to ignore the new
tracks instead of failing completely. So this change adds a
warning log message and assigns a placeholder output.
Note: The same workaround already exists in HlsSampleStreamWrapper
and MediaExtractorCompat.
Issue: androidx/media#1476
#cherrypick
PiperOrigin-RevId: 646427213
The two arrays need to have the same length and the selection
must match in their nullness (unless for TYPE_NONE
renderers). Clarify this more clearly in the docs and add
new asssertions for it. This avoids that the player is failing
in obscure ways much later.
Issue: androidx/media#1473
#cherrypick
PiperOrigin-RevId: 646086833
The test is flaky because the decoding process in the renderer
depends on some timing from MediaCodec beyond our control and
the new keyframe added in the test is sometimes 'dropped' when
it arrives too late.
We can fix this by controlling the test progress a bit more
tightly: first rendering with the same current time until the
key frame is processed and then start increasing the time
until we've reached the end.
#cherrypick
PiperOrigin-RevId: 646064352
Summary:
This change aims to add a generic `CustomData` field to the `Format` class.
The intent is to allow ExoPlayer customers to add extra data to the Format class without forcing
specific data to be included, impacting customers that do not need it and would allow for the data
to be changed without requiring changes to the `Media3` codebase.
Previously we assumed that `surfaceSyncGroupV34` was always non-null on
API 34, but this isn't true in edit mode. Instead we add an explicit
null-check before accessing it. We don't need to null-check it at the
other usage site because we are already null-checking `surfaceView` (via
`instanceof` check).
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 645008049
Some cases are not handled correctly at the moment:
- Pausing during suppressed playback should not clear the
suppression state.
- Transient focus loss while paused should be reported as
a playback suppression.
Issue: androidx/media#1436
#cherrypick
PiperOrigin-RevId: 644971218
Sometimes the reason for the current state may change. If we don't
report this again, users have no way of knowing that the reason
changed.
Also adjust ExoPlayerImpl and MediaControllerImplBase accordingly.
SimpleBasePlayer already adheres to this logic.
#cherrypick
PiperOrigin-RevId: 644970236
This helps to keep the reason always together with the state it
is referring to, avoiding any side channels and making sure there
are no accidental inconsistencies.
#cherrypick
PiperOrigin-RevId: 644969317
This workaround is only applied on API 34, because the problem isn't
present on API 33 and it is fixed in the platform for API 35 onwards.
Issue: androidx/media#1237
#cherrypick
PiperOrigin-RevId: 644729909
In the case of a legacy session app providing an error
code different to `ERROR_UNKNOWN` without an error
message, a localized fallback message is provided
instead of ignoring the error.
#cherrypick
PiperOrigin-RevId: 644704680
The Javadoc was indicating that the duration should always be set,
but it doesn't need to be set in most cases for export.
PiperOrigin-RevId: 644685827
Includes adjusting how effects are defined, to make it clearer in a
test that a given ItemConfig has effects associated with it.
PiperOrigin-RevId: 644684308
The 'player commands' returned to ExoPlayerImpl instruct the
player on how to treat the current audio focus state.
The current return value when playWhenReady==false is misleading
because it implies we are definitely not allowed to play as if
we've lost focus. Instead, we should return the actual player
command corresponding to the focus state we are in.
This has no practical effect in ExoPlayerImpl as we already
ignore the 'player command' completely when playWhenReady=false.
To facilitate this change, we also introduce a new internal
state for FOCUS_NOT_REQUESTED to distinguish it from the state
in which we lost focus.
#cherrypick
PiperOrigin-RevId: 644416586
There are a lot of tests for AudioFocusManager in isolation,
but almost none for the handling in ExoPlayer.
Add test coverage for all the common cases, including some
currently broken behavior that is indicated by TODOs.
PiperOrigin-RevId: 644319251
These calls have no effect because the VideoFrameReleaseControl of
CompositionPlayer is created with allowedJoiningTimeMs set to 0.
PiperOrigin-RevId: 644274524
This is an internal refactor with no logic changed.
There is a duplication in information and a lack of consistency around
the use of test assets in transformer androidTest. This change
refactors each asset to be defined as its own AssetInfo, with the other
relevant parts stored alongside the uri.
Once this is in place, we can consider other useful functionality, such
as having boolean flags for what tracks an asset has, helper methods
for whether an asset is local or remote, and more. This will reduce the
manual overhead necessary to use more assets in tests, and in
particular leads towards easily using new & existing assets in
parameterized tests.
PiperOrigin-RevId: 644040595
This is done by reserving some space for moov box at the start of the file and writing it there if it fits. If it doesn't fit, then it is written at the end of the file.
PiperOrigin-RevId: 643944698
This method allows customizing the maximum position when using `Player.seekToPrevious()`.
This commit also adds two new methods to `TestExoPlayerBuilder`:
- `setMaxSeekToPreviousPosition(long)`
- `getMaxSeekToPreviousPosition()`
Images are rendered into an ImageView (on top of the video shutter).
The image view is set to the images emitted by ExoPlayer's ImageOutput
and cleared when there is no longer a selected image track.
In order to keep the existing behavior of video tracks to only clear
the old output once the new first frame is rendered (avoiding short
periods of black between playlist items), we have to reorder this code
slightly to make it work for video and images. Both are treated in the
same way. If both are enabled, video takes precedence.
As the UI module only depends on the common module, we can't direcly
add the ImageOutput to ExoPlayer. This is done via reflection if
the provided Player is an ExoPlayer.
#cherrypick
PiperOrigin-RevId: 643320666
This value is used in a follow-up change to re-order SEI messages
containing CEA-6/708 data from decode order to presentation order.
PiperOrigin-RevId: 643296338
This change introduces a new class in Media3 `MediaExtractorCompat`, designed to be a drop-in replacement for platform `MediaExtractor`. While not all APIs are currently supported, the core functionality for the most common use cases of `MediaExtractor` is now available. Full API compatibility will be achieved in the future.
PiperOrigin-RevId: 643045429
This CL is a pure refactor of the existing tests, iterative changes
will be done in follow-ups.
The only logic change is having all MP4 assets have the presentaton of
height=360. The old code had some with height 480.
PiperOrigin-RevId: 643020773
Muxer never uses latest output position but always writes to
a specific location, so restoring its position does not add any
value.
PiperOrigin-RevId: 642996941
Previously, if renderFramesAutomatically = false, DefaultVideoFrameProcessor
may call onInputStreamProcessedListener after all frames have been
onOutputFrameAvailableForRendering, but before they had all been rendered and
freed.
Delay onInputStreamProcessedListener being called and subsequent DVFP
reconfiguration of effects, until all frames are rendered.
Tested using exoplayer setVideoEffects demo with playlist
PiperOrigin-RevId: 642963100
Determine `nextMediaSequence` and `nextPartIndex` based on the last `SegmentBaseHolder` instance, as it can update `mediaSequence` and `partIndex` depending on whether the HLS playlist has trailing parts or not.
Issue: androidx/media#1395
PiperOrigin-RevId: 642961141
When deselecting the single sample track and later re-selecting this
track, the current shortcuts in ProgressiveMediaPeriod don't handle
this case correctly and cause assertion failures.
In particular, this change fixes 3 issues:
1. When re-selecting the single sample track, we have cleared the
SampleQueue and need to reload the sample. The existing shortcut
should only be applied to avoid the reload when starting from a
non-zero position.
2. When de-selecting the track, ProgressiveMediaPeriod is left in
an inconsistent state where the sample queues are empty but
loadingFinished is still true. Fix this by resetting
loadingFinished to false.
3. When seeking, we avoid reloading the stream if we can keep
inside the existing samples. This logic assumes that all
remaining samples will continue to be loaded in the queue.
This condition isn't true though for single sample tracks
that have been de-selected. They appear to support the seek
inside the queue (=no seek necessary, always supported), but
still require a new load if there is no ongoing one to load
the sample. Fix this by checking this implicit assumption
(still loading, or loading finished).
PiperOrigin-RevId: 642650248
Also move the track selection header strings to the demo app
as they are only used there (except for audio, which stays in UI)
PiperOrigin-RevId: 642616037
A fatal `PlaybackException` is mapped to a legacy playback state
in state `STATE_ERROR` with error code, message and extras. A
non-fatal error sent to controllers with `MediaSession.sendError`
is synced to the legacy session by setting error code and message
and merging the extras while preserving the rest of the state in
sync with the session player.
Vice versa, a `MediaController` connected to a legacy session receives
fatal errors through `Player.onPlayerErrorChanged()` and non-fatal errors
through `MediaController.Listener.onError()`.
Error codes are mapped in `LegacyConversions`. Values of error codes
in `@SessionError.ErrorCode` come from `@PlaybackExceptino.ErrorCode`
with the exception of `@SessionError.ERROR_IO` and
`@SessionError.ERROR_UNKNOWN`. These already exist in
`@PlaybackException.ErrorCode` and are mapped accordingly to avoid
semantic duplicates.
PiperOrigin-RevId: 642595517
- Video release should check for buffer timestamp (which is renderer-offsetted), rather than the frame timestamp
- ImageRenderer should report ended after all of it's outputs are released, rather than when finished consuming its input.
Add tests for timestamp handling
PiperOrigin-RevId: 642587290
It's currently not possible to remove a previously set image output
on ExoPlayer, although the underlying renderer already supports
receiving null to clear the output. Marking the parameter as
nullable allows apps to clear it as well.
PiperOrigin-RevId: 642569081
useHdr is unused option and doesn't make sense is the dynamic range of the overlay and video must match
Also reorders and adds javadoc in line with coding conventions
PiperOrigin-RevId: 642555396
In order to do that, make the VideoSink nullable in MCVR.
We want to avoid calling VideoFrameReleaseControl.setClock directly
from MCVR when the sink is enabled. The goal is to handle all the
communication with the release control from the sink/sink provider.
PiperOrigin-RevId: 642542063
Rational for keeping field package private:
Since the overall export already very complex, by looking at the output file
its hard to know if the desired processing happened or not. Since we now
support sequences with "n" media items, its even more important to know if all
the media items were processed or not.
Although the field exposes implementation details, it seems ok as we get benefit of detailed testing.
PiperOrigin-RevId: 642337888
These are no longer needed now that the `Bundleable` interface has been
removed. Public methods are deprecated, package-private ones are
removed. Callers are migrated in both cases (except where tests
explicitly exist for the deprecated method).
PiperOrigin-RevId: 642294451
This interface is not used in the library. Callers can use the
`Bundle toBundle()` and `static Foo fromBundle(Bundle)` methods
defined directly on each type instead.
PiperOrigin-RevId: 642271609
This change adds `SessionError` and uses it in `SessionResult`
and `LibraryResult` to report errors to callers.
Constructors and factory method that used a simple `errorCode` to
construct error variants of `SessionResult` and `LibraryResult`
have been overloaded with a variant that uses a `SessionError`
instead. While these methods and constructors are supposed to be
deprecated, they aren't yet deprecated until the newly added
alternative is stabilized.
PiperOrigin-RevId: 642254336
This callback is useful for advanced use cases that care about
which Player calls are batched together. It can be implemented
by triggering this new callback every time a batch of Player
interactions from a controller finished executing.
PiperOrigin-RevId: 642189491
Previously these tests were setting the test-only `KEY_CONTROLLER`
bundle value to the prod value of
`MediaController.KEY_MEDIA_NOTIFICATION_CONTROLLER_FLAG`, which is a bit
confusing because this is intended to be used as a `Bundle` **key**
(for a boolean value), and not a value itself.
Instead this CL creates a test-only value that can be used by
`RemoteMediaSession` and related test-only friends to indicate that
something (e.g. error or extras) should only be set on the notification
controller.
This CL also changes the logic in `MediaSessionProviderService` to
avoid needing to special-case checking for this controller key.
PiperOrigin-RevId: 641939283
The previous wording suggested that `setVideoEffects()` may **only** be
called before `prepare()`, i.e. the effect cannot be changed during
playback. The intent is instead that `setVideoEffects()` must be called
once before playback in order to configure the effects pipeline, but
the effect can then be changed during playback by further calls to
`setVideoEffects()`.
Issue: androidx/media#1393
PiperOrigin-RevId: 641853629
Avoid scaling the lanczos windown function when scaling up.
When scaling up (output > input), we shouldn't scale the window
function or we risk not sampling any of the input pixels.
PiperOrigin-RevId: 641838149
Before, the listener was set in onReadyToInitializeCodec, which means
that it was reset every time a new codec was used.
We need to set the listener every time MCVR is enabled (not only the
first time), because it might have been set by another renderer.
PiperOrigin-RevId: 641825717
Before this change, the timestamps output from composition playback is offset
with the renderer offset. After this change, the offset is removed and the
timestamp behaviour converges with Transformer, that is, the timestamps of
video/images frames will follow that of the composition. For example, with a
composition of two 10-s items, clipping the first with 2s at the start, the
timestamp of the first frame in the second item, will be 8s.
PiperOrigin-RevId: 641121358
When the frame release control invalidates a buffer and returns that
the buffer must be ignored, we need to exit early before performing
additional checks that may result in method calls using the invalid
buffer.
PiperOrigin-RevId: 640555688
Ensures valid progress state is returned. Should not return NOT_STARTED
once transformer.start has been called, until export ends.
PiperOrigin-RevId: 640533805
Usages removed in this CL are:
- onProcessedStreamChange, which was already called from the VideoSink
(via VideoFrameRenderControl)
- setOutputSurface, which was also already called from the VideoSink
- setFrameRate, which this CL now sets in the VideoSink
PiperOrigin-RevId: 640530903
Removes the flakiness of
MediaItemExportTest.getProgress_unknownDuration_returnsConsistentStates
by using a longer input asset, such that ExoPlayer does not determine
the duration of the media.
PiperOrigin-RevId: 640502470
Before this CL, we were checking whether the video sink was initialized
to determine whether it should be used. In the meantime,
shouldUseVideoSink has been introduced. Use this boolean to check
whether to use the video sink as it's a clearer signal.
PiperOrigin-RevId: 640499147
Add SeparableConvolution.configure(inputSize) to allow effect configuration
depending on input dimensions.
Add LanczosResample.scaleToFit method to scale input images to fit inside
given dimensions.
PiperOrigin-RevId: 640498008
This avoids having to add AnalyticsListener and catching the `onPlayerReleased` callback.
The `Exoplayer.release()` method is blocking and one can be sure that the player is released if the call returned. However, the method is useful for UI testing and asserting that the player is released after a certain UI action, e.g. closing the activity or detaching a window.
PiperOrigin-RevId: 640114416
fragment_shader_separable_convolution_es2.glsl had optimizations that assumed
all convolution coefficients are positive. Support negative coefficients,
and add tests.
PiperOrigin-RevId: 640104741
Before this change:
The only way to customize the icons was to override the drawables, e.g.
* `exo_styled_controls_play`
* `exo_styled_controls_pause`
However, that would set the drawables globally and prevent users from customizing the icons **per** PlayerView.
After the change, it is possible to provide drawable icons in the xml layout directly via `<androidx.media3.ui.PlayerView>` and
* `app:play_icon="@drawable/...`
* `app:pause_icon="@drawable/...`
* `app:vr_icon="@drawable/...`
* `app:fullscreen_exit_icon="@drawable/...`
* `app:next_icon="@drawable/...`
Note:
Two buttons that are left out of this change are fast-forward and rewind. They are more complicated due to layout insertion and customization with seek back/forward increments in the TextView.
Issue: androidx/media#1200
PiperOrigin-RevId: 639832741
These changes are possible because getProgress is no longer a blocking
operation on transformer.
* Tests call getProgress after every looper message executed.
* Use longer media assets for getProgress tests to give more progress
intervals.
* Remove conditional assertions.
PiperOrigin-RevId: 639734368
Switch from 4-channel RGBA_16F lookup texture to 1-channel R_16F.
Do not use a bitmap when creating the lookup table texture.
Instead, fill the texture directly.
Do not manually convert 32-bit float to 16-bit. Instead, let OpenGL
libraries do this for us.
PiperOrigin-RevId: 639717235
The CMCD data was incorrectly added to the `dataSpec` of the media segment instead of the init segment.
Also relaxed the condition for playbackRate to be C.RATE_UNSET when creating an instance of CmcdData.Factory as there was nothing enforcing this check.
#minor-release
PiperOrigin-RevId: 639046080
Foreground service type `mediaPlayback` requires permission `android.permission.FOREGROUND_SERVICE_MEDIA_PLAYBACK`. The `MockMediaSessionService`, `LocalMockMediaSessionService`, `MockMediaLibraryService`
and `LocalMockMediaLibraryService` declared in the manifest are in the `mediaPlayback` type.
PiperOrigin-RevId: 639013810
AudioGraphInput.onMediaItemChanged is called on input thread. Pending
media item changes are processed on processing thread, inside calls to
getOutput().
This change allows multiple pending media item changes to be enqueued,
and processed in sequence.
PiperOrigin-RevId: 638995291
This is a relatively small change, and massively simplifies the work
needed for an app to consume Kotlin Multiplatform resources (without a
full `KmpResourceDataSource` implementation, which poses some
dependency challenges for now).
Issue: androidx/media#1405
PiperOrigin-RevId: 638991375
When running in asynchronous mode, MediaCodec will be running the CPU to signal input and output buffers being made available for use by the player. With ExoPlayer.experimentalSetDynamicSchedulingEnabled set to true, ExoPlayer will wakeup to make rendering progress when MediaCodec raises these signals. In this way, ExoPlayer work will align more closely with CPU wake-cycles.
PiperOrigin-RevId: 638962108
Currently ExoPlayer schedules its main work loop on a 10 ms interval. When renderers cannot make any more progress (ex: hardware buffers are fully written with audio data), ExoPlayer should be able to schedule the next work task further than 10ms out into the future.
Through `experimentalSetDynamicSchedulingEnabled` and these changes to `MediaCodecAudioRenderer`, ExoPlayer can use the data provided by the audio renderer to dynamically schedule its work tasks based on when it is expected that progress can be made.
PiperOrigin-RevId: 638677454
Currently ExoPlayer schedules its main work loop on a 10 ms interval. When renderers cannot make any more progress(ex: hardware buffers are fully written with audio data), ExoPlayer should be able to schedule the next work task further than 10Ms out.
Through `experimentalSetDynamicSchedulingEnabled`, ExoPlayer will dynamically schedule its work tasks based on when renderers are expected to be able to make progress.
PiperOrigin-RevId: 638676318
Both constants have the same value, but the method returning initial values for the media sequence/part uses `INDEX_UNSET`, so it makes sense to use it.
PiperOrigin-RevId: 638673282
Degammaing has been removed in cb4b2ea55c. The goldens for
TransformerHdrTest (previously TransformerSequenceEffectTestWithHdr)
were not regenerated because the test wasn't running due to its name
(fixed in e41a966237).
PiperOrigin-RevId: 638645635
Add DefaultVideosFrameProcessor experimental flag that controls
whether input Bitmaps are sampled once for a repeating sequence of
output frames with the same contents, or once for each output frame.
PiperOrigin-RevId: 637921350
Only sample from input bitmap when the input image has changed.
Introduce GainmapShaderProgram.newImmutableBitmap API that signals
input bitmap changes to GainmapShaderProgram (DefaultShaderProgram).
PiperOrigin-RevId: 637920207
This removes `throws Exception` from public methods in favour of more
specific exception types (`TimeoutException` and `PlaybackException`).
PiperOrigin-RevId: 637880546
Before this CL, externalShaderProgramInputCapacity was not reset when
the external shader program was reset (which occurs when the
InputSwitcher switches to an input with a different ColorInfo). This is
due to a regression introduced in bef3d518d2.
PiperOrigin-RevId: 637869215
Add a wait in DefaultCodec.signalEndOfInputStream when no
video encoder output has been seen. This avoids a thread synchronization problem
between writing frames to video surface, and signaling end of stream,
which was hit for video input of only one frame on some devices.
PiperOrigin-RevId: 637844690
PQ and HLG have different luminance ranges (max 10k nits and max 1k nits resp). In GL, colors work in a normalised 0 to 1 scale, so for PQ content, 1=10k nits and and for HLG content, 1=1k nits.
This cl scales and normalises PQ content appropriately so that all HDR content works in the HLG luminance range. This fixes two things
1. Conversions between HLG and PQ are "fixed" (before the output colors looked too bright or too dark depending on which way you are converting)
2. color-altering effects will be able to work consistently across HLG and PQ content
1 is tested in this cl. 2 will be tested when ultra HDR overlays are implemented, both cases have been manually tested to ensure the output looks correct on a screen.
PiperOrigin-RevId: 636851701
If subtitle-parsing-during-extraction is enabled (now defaults to on),
the 'outer' extractor class name is often
`SubtitleTranscodingExtractor`, leading to some slightly useless error
messages like:
`None of the available extractors (FragmentedMp4Extractor, Mp4Extractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, TsExtractor, MatroskaExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, AviExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor, SubtitleTranscodingExtractor)`
PiperOrigin-RevId: 636834354
Remove redundant test logic to add file size to ExportResult because
the file size is already added to export result as part of an export
finishing.
PiperOrigin-RevId: 636499236
Add composition time offset parameter to TRUN box to
support muxing of videos containing B-frames by FragmentedMp4Muxer.
Update TRUN box version from 0 to 1 in order to manage signed
composition time offset.
PiperOrigin-RevId: 636426397
This is currently set from `Mp3Extractor.synchronizedHeader` which
gets overwritten every time we read a new frame. It seems safer to make
this defensive copy (and there will be at most one `XingFrame` instance
per-playback, so this is not prohibitively expensive).
PiperOrigin-RevId: 636181038
This change avoids a muxer deadlock when:
1. Sequence of items
2. First item has audio track that is shorter than video
3. Audio finishes, and muxer refuses to write more than 500ms of video
consecutively.
SequenceAssetLoader fails to progress to the second item. A muxer
deadlock is possible when the audio of the first item finishes,
audio end-of-stream is not propagated through AudioGraph, and muxer blocks
video, preventing SequenceAssetLoader to move to the next item in sequence.
By triggering silence generation early as soon as audio EOS is
encountered, we ensure SequenceAssetLoader can progress to the next item.
PiperOrigin-RevId: 636179966
`Info` header is used for CBR files, but in some cases not **every**
frame in these files is the same size. This change stops using the
single frame after the `Info` frame as the 'template' (and assuming all
subsequent frames are the same size/bitrate), and instead derives the
bitrate from fields in the `Info` header. This works for files which are
'almost' constant bitrate, like the one in Issue: androidx/media#1376 where every
frame is either 1044 or 1045 bytes except the one immediately after the
`Info` frame which is 104 bytes (32kbps), resulting in a wildly
incorrect duration calculation.
PiperOrigin-RevId: 636151605
This was previously only set on images because it was not ignored on
other media types. This parameter was made no-op for non-images in
7b2a1b4443.
PiperOrigin-RevId: 636078142
This change was originally made in 379cb3ba54.
It was then accidentally lost in when `Cea608Parser` was merged back
into `Cea608Decoder` in 25498b151b.
This was spotted when re-doing a similar lost change to `Cea708Decoder`,
reported in https://github.com/androidx/media/pull/1315.
See reasoning on e2847b3b80
about why this is the only 'lost' CEA-608 change.
PiperOrigin-RevId: 635803536
This change was originally made in 6f8249184b
It was then accidentally lost in when `Cea708Parser` was merged back
into `Cea708Decoder` in 51b4fa2cc8.
This is the only change made to the actual 'decoding' logic in
`Cea708Parser` between it being split from `Cea708Decoder` and merged
back in again, all the other changes in this period relate to the
implementation of the `SubtitleParser` interface, so don't need to be
preserved in `Cea708Decoder`:
51b4fa2cc8/libraries/extractor/src/main/java/androidx/media3/extractor/text/cea/Cea708Parser.java
`Cea608Parser` was also merged back into `Cea608Decoder` in
25498b151b
and so is vulnerable to the same risk of accidental loss of changes. To
be sure, I also checked the history of this file:
25498b151b/libraries/extractor/src/main/java/androidx/media3/extractor/text/cea/Cea608Parser.java
The only 'decoding logic' change there is 379cb3ba54,
which was also lost in 25498b151b.
I will send a separate change to resolve this.
PiperOrigin-RevId: 635796696
This shows ExoPlayer currently wrongly reports the duration of this
sample, because it assumes every frame is 32kbps (104 bytes) due to the
`PCUT` frame immediately after the `Info` frame.
A follow-up change will modify `Info` frame handling to resolve this
issue.
This sample was crafted using a hex editor to insert the additional
`PCUT` frame (the pattern of `null` and `x` is taken from the sample
file in Issue: androidx/media#1376, the header is modified to set the channel count
to 1 to match the rest of the file), and then update the frame count
and data size of the `Info` header to match.
Issue: androidx/media#1376
PiperOrigin-RevId: 635772837
Fragment shaders in OpenGL ES shader language aren't guaranteed
to support highp, required to correctly represent pixel coordinates
inside large images (e.g. 1920x1080).
This change moves coordinate mirroring for images out of fragment shader.
Fixes http://Issue: androidx/media#1331
PiperOrigin-RevId: 635732208
If MediaCodec allocates passes an image buffer with a cropped region,
SurfaceTexture.getTransformMatrix will cut off 2 pixels from each dimensions.
The resulting videos will appear a little stretched.
This patch inspects the SurfaceTexture transform matrix, and guesses what the
unscaled transform matrix should be.
Behind experimentalAdjustSurfaceTextureTransformationMatrix flag
PiperOrigin-RevId: 635721267
Gainmaps don't currently have an equals override, only reference equality is checked by Objects.equals(gainmap1, gainmap2). Create an equals method for gainmaps with the fields we care about to ensure we don't incur false positives in our equality checks.
PiperOrigin-RevId: 635510451
This is a fix for the fix in 319854d624. The original fix did
not reset the firstPeriodId to avoid any id clashes with future
updates. This however only works under the assumption that the
next manifest load at the next call to prepare() is exactly the
same as the current manifest. This is not true unless the call
happens very quickly (and may fail even then). Instead we should
keep the existing manifest directly as a reference so we can use
it to find the number of removed periods when we get a new manifest
at the next call to prepare().
Issue: androidx/media#1329
PiperOrigin-RevId: 634853524
This should be no-op overall and helps to disentangle the clock sync
update from the state of the manifest.
We currently check oldPeriodCount==0 to trigger the clock sync load,
which only works because the manifest happens to be null whenever
we need a new clock sync. We can decouple these concepts by directly
checking whether we have an existing elapsedRealtimeOffsetMs.
This also requires to set this value explicitly at the point where we
consider it set to the local device clock fallback when the timing
element load fails.
PiperOrigin-RevId: 634844921
This case is most likely to happen when re-preparing a multi-period
live stream after an error. The live timeline can easily move on to
new periods in the meantime, creating this type of update.
The behavior before this change has two bugs:
- The player resolves the new start position to a subsequent period
that existed in the old timeline, or ends playback if that cannot
be found. The more useful behavior is to restart playback in the
same live item if it still exists.
- MaskingMediaSource creates a pending MaskingMediaPeriod using the
old timeline and then attempts to create the real period from the
updated source. This fails because MediaSource.createPeriod is
called with a periodUid that does no longer exist at this point.
We already have logic to not override the start position and need
to extend this to also not prepare the real source.
Issue: androidx/media#1329
PiperOrigin-RevId: 634833030
For each item, AudioGraphInput now pads the input audio track with silence
to the duration given in onMediaItemChanged.
Possibly resolves Issue: androidx/media#921 .
PiperOrigin-RevId: 634753721
The two affected tests where playing until a specific
position to enable the player to read ahead. The method
pauses at exactly the target position, but then has
temporarily undetermined behavior because the playback
thread uses player.getClock().onThreadBlocked() that lets
the playback thread make progress in parallel to the test
thread. The tests were flaky because they sometimes made
so much progress that they ended playback before we could
query the updated renderer state.
This can be fixed by using
run(player).untilBackgroundThreadCondition instead, which
is guaranteed to be fully deterministic, but may not be able
to stop at exactly the desired position (which we don't
really need anyway for this test).
PiperOrigin-RevId: 634699752
The method is only allowed to be called on prepared items.
This check was currently missing and also causing the
corresponding test to be flaky in ExoPlayerTest.
PiperOrigin-RevId: 634694077
Before this change, if a playback error is thrown the test fails with a
timeout and no additional info:
```
java.util.concurrent.TimeoutException
at androidx.media3.exoplayer.e2etest.WebvttPlaybackTest.stallPlayerUntilCondition(WebvttPlaybackTest.java:361)
```
After this change, the test failure includes a much more useful stack
trace, e.g. from 0352db9a37:
```
Caused by: java.lang.IllegalStateException: Legacy decoding is disabled, can't handle text/vtt samples (expected application/x-media3-cues).
at androidx.media3.common.util.Assertions.checkState(Assertions.java:100)
at androidx.media3.exoplayer.text.TextRenderer.assertLegacyDecodingEnabledIfRequired(TextRenderer.java:587)
at androidx.media3.exoplayer.text.TextRenderer.onStreamChanged(TextRenderer.java:210)
```
PiperOrigin-RevId: 634672138
ExoPlayer sometimes calls AudioSink.playToEndOfStream before configuring
the sink. Before this CL, the composition player was failing if this
happened.
PiperOrigin-RevId: 634306592
Fix "subtitles rendered with border and no fill color" problem:
https://github.com/moneytoo/Player/issues/413
because '0' means it's an index to the palette table, not an RGBA value of 0
To override this change, and go back to parsing during rendering,
apps must make two method calls:
1. `MediaSource.Factory.experimentalParseSubtitlesDuringExtraction(false)`
2. `TextRenderer.experimentalSetLegacyDecodingEnabled(true)`
PiperOrigin-RevId: 634262798
This class is not ready for production app usage yet, so it is still
marked `@RestrictTo(LIBRARY_GROUP)` for now. Apps can experiment with it
in a non-prod context by suppressing the associated lint error.
* Issue: androidx/media#1014
* Issue: androidx/media#1185
* Issue: androidx/media#816
PiperOrigin-RevId: 633921353
The test currently resets the time too far in the past and then has
to run through ~30000 additional iterations of doSomeWork to reach
the end, sometimes triggering the test timeout.
Fix it by resetting the time to the intended start position when
transitioning items.
PiperOrigin-RevId: 633918706
Also make one class truly package-private and keep the comment instead.
This comment should only appear on elements with default (package-private) visibility.
PiperOrigin-RevId: 633911914
This annotation is only needed on public classes.
This change also removes the `/* package */` comment from some `public`
classes.
PiperOrigin-RevId: 633864544
This means the content source is 'prepared' instantly with a
placeholder, enabling all further preparation steps (e.g. loading
preroll ads) while the actual content is still preparing. This
improvement can speed up the start time for prerolls in manifest-based
content that doesn't have a zero-time preparation step like progressive
media.
Issue: androidx/media#1358
PiperOrigin-RevId: 633640746
This change resets the error in the platform error state immediately
to make sure that the custom error is reflected only very briefly
and then gets back to the playback state that actually reflects the
player state.
Issue: androidx/media#543
PiperOrigin-RevId: 633626180
This treats heic as a separate mimetype to heif (even though heic files are a subset of heif files). This is in line with other platform classes like android.content.ContentResolver
https://developer.android.com/media/platform/supported-formats#image-formats was updated to include avif support or API level 34, so added this MimeType as well and updated our associated util.
solves Issue: androidx/media#1373
PiperOrigin-RevId: 633616214
This allows apps to better detect when the platform
reclaims a codec. This requires adding the error code
to MediaCodecDecoderException.
PiperOrigin-RevId: 633588914
Add ctts box implementation to handle muxing B-frame videos.
Add method convertPresentationTimestampsToCompositionOffset to
provide sample offsets. Return empty ctts box in case of video
does not contain B-frame. Add ctts box to MoovStructure to handle
muxing the video containing B-frames.
PiperOrigin-RevId: 633537106
https://truth.dev/faq#java8
Also use this change to remove most test usages of
`Lists.transform(...)` and replace them with `.stream().map(...)`.
PiperOrigin-RevId: 633523904
Also add documentation that suggests to use them in
PriorityTaskManager and adjust codec priorities in
Transformer's DefaultDe/EncoderFactory accordingly.
PiperOrigin-RevId: 633272667
The class currently tracks the input format itself, updating it too
early in onConfigure() instead of onFlush(). This causes issues when
the format changes and the new values are applied to the silence
skipping logic of the old format. The fix is to use the base class
input format handling instead.
Issue: androidx/media#1352
PiperOrigin-RevId: 633232368
The process crashes unexpectedly on these devices.
The new changes skips running these tests instead of marking them pass, when
the device needs to be skipped.
PiperOrigin-RevId: 633183638
Two devices were producing B-frames earlier and were causing
frame mismatch. So we had added a workaround for them.
Those devices does not produce B-frames now
after disabling high profile on them, so we don't need workaround now.
PiperOrigin-RevId: 633127755
Due to loading a MediaSourceFactory via reflection:
Before this change
* the content type was logged as an integer, rather than a human-readable string
* `ClassNotFoundException` was swallowed silently by `maybeLoadSupplier` without telling the user what module they were missing
After:
* ClassNotFoundException is swallowed silently ONLY when determining supported types
* ClassNotFoundException is bubbled up when we are trying to play media without the corresponding module properly loaded
PiperOrigin-RevId: 632568989
When the processor is flushed, it needs to reset its internal state
in preparation for receiving fresh input data.
Flushing the internal SonicAudioProcessor on the other hand should
not go through the parent flush() method and instead flush the
internal processor only when needed.
PiperOrigin-RevId: 632530395
The same doSomeWork iteration that triggers the silence skipping
discontinuity may already have another discontinuities (like
AUTO_TRANSITION), which should take precedence over the silence
skipping.
PiperOrigin-RevId: 632432851
Use different textures in calls to queueInputTexture(). Allows the texture to be deleted one it is used in transformer and effect.
PiperOrigin-RevId: 632430866
Rounding down means that very small diferrences (e.g. 1 us) result
in bytesToNextSpeedChange==0, which stalls progress forever as no
new bytes are read. Rounding up instead ensures that we always read
at least one audio frame if nextSpeedChangeTimeUs is in the future.
PiperOrigin-RevId: 632116560
One can set crossProtocolRedirectsForceOriginal to force cross protocol redirects to use the original protocol. This might cause the connection to fail so it can only used when allowCrossProtocolRedirects is set to false or unset (default false).
PiperOrigin-RevId: 631937956
allows apps to use the logic statically before running transformer.
Also ensure the mime type reported is the mime type outputted
PiperOrigin-RevId: 631811763
When the period has loaded to the end of the source, the `period.getBufferedPositionUs` will be set to `C.TIME_END_OF_SOURCE`, which is a negative value. Thus, the original `continueLoadingPredicate` will never turn to `false`, as the `bufferedPositionUs` is definitely less than the target preload position that is expected to be positive.
In this change, we added `PreloadMediaSource.PreloadControl.onLoadedToTheEndOfSource(PreloadMediaSource)` to indicate that the source has loaded to the end. This allows the `DefaultPreloadManager` and the custom `PreloadMediaSource.PreloadControl` implementations to preload the next source or take other actions.
This bug was not revealed by the the `DefaultPreloadManagerTest` because the related tests were all using the `FakeMediaSource` and only setting the preload target to `STAGE_TIMELINE_REFRESHED`. Thus, the tests for testing the `invalidate()` behaviors were modified to use the real progressive media whenever possible, unless we have to use `FakeMediaSource` to squeeze a chance to do more operations between the preloading of sources to test some special scenarios.
PiperOrigin-RevId: 631776442
For offloaded playback, reset the tracking field for stream completion in `DefaultAudioSink` prior to calling `AudioTrack.stop()` so that `AudioTrack.StreamEventCallback#onPresentationEnded` correctly identifies when all pending data has been played.
#minor-release
PiperOrigin-RevId: 631744805
The Javadoc is stating that the image duration is ignored for non-image
input but this is incorrect (for example, it affects seeking
performance). The Javadoc will be updated in another CL.
PiperOrigin-RevId: 631730980
When the PlaybackParameters are set to their DEFAULT value, we
currently bypass the audio processor chain when determining the
output media position, under the assumption that no timestamp
change happens in the audio processors. This assumption may not
be true as the audio processors can change playout durations on
their own accord independent of the provided PlaybackParameters.
To correctly reflect any updated playout duration, we can just
always check the audio processor chain. The default implementation
will continue to assume that only the SonicAudioProcessor changes
the playout duration.
PiperOrigin-RevId: 631726112
After this CL, DVFP waits for flushing until all frames registered previously
arrives.
Previously, ETM records the difference between the number of registered frames,
and the number of frames arrivd on the SurfaceTexture, when flushing. (Note
that ETM is flushed the last in the chain, as flushing is done backwards from
FinalShaderProgramWrapper). ETM then waits until the number of frames arrive
after flush.
The normal flow is, MediaCodecVideoRenderer (MCVR) registers a new decoded
frame, in `processOutputBuffer()` to DVFP, MCVR call `codec.releaseOutputBuffer()`
to have MediaCodec render the frame, and then the frame arrives in DVFP's ETM.
However there might be a discrepancy. When registering the frame, ETM records
the frame on the calling thread, ~instantly. Later when the rendered frame
arrive, ETM records a frame is available on the task executor thread (or
commonly known as the GL thread). More specifically, when a frame arrives
in `onFrameAvailableListener`, ETM posts all subsequent processing to
the task executor. When seeking, the task executor is flushed as the first
step. It might be a frame that has already arrived on ETM, and the processing
of such frame has already been queued into the task executor; only to be
flushed as a result of flushing the task executor. If this happens, the frame
is considered to be never have arrived. This causes a freeze on the app,
because ETM'll wait until this frame arrives to declare flushing has completed.
PiperOrigin-RevId: 631524332
AudioGraphInput now accepts a range of inputs, as long as the effects
provided modify the audio to be int 16.
As part of this, add the workaround to DefaultCodec to ensure pcm
encoding is correct, and remove parameterized tests that are not valid.
PiperOrigin-RevId: 631404152
The newer versions include a bugfix that automatically highlights
when our project requires enhanced Java 8 desugaring.
Issue: androidx/media#1312
PiperOrigin-RevId: 631373018
When converting `MediaMetadata` to the legacy `MediaDescriptionCompat`
the selection and order of properties to use has been aligned with the
behavior of media1. This selection is relevant for users that use a
platform or legacy controller or browser. Before and up to the current
API version 34, this includes System UI, Android Auto/Automotive and
AVRCP (Bluetooth).
PiperOrigin-RevId: 630999535
Without it, the DAC doesn't render the full sentence. And the link is not actually linking to the proper constructors.
#minor-release
PiperOrigin-RevId: 630395271
The keys and ilst boxes in the MP4 muxer were allocated
with a fixed size of 200 bytes. This was not enough to
store the keys and values of large metadata entries, which
could cause the muxer to throw an exception. This CL allocates
the correct size for the keys and ilst boxes based on the size of the metadata entries.
PiperOrigin-RevId: 630331680
The second stage of the changes remove the conversion to linear colors in the SDR effects pipeline by default.
also resolves Issue: androidx/media#1050
PiperOrigin-RevId: 630108296
Also adds first frame rendered test for playing back compositions.
- This test checks the output pixels using an `ImageReader` to retrieve the
output bitmap
PiperOrigin-RevId: 630100817
When the AdTagLoader is deactivated because of a player error, the
error callback is already pending on the app's main thread, but not
yet executed. This means the VideoAdPlayerCallback instances
registered in AdTagLoader won't receive this error event if the
Player.Listener is immediately removed from AdTagLoader.
This can be fixed by postponing the deregistration until after
already pending messages have been handled. As this means other
callbacks can be triggered now with player==null, this check needs
to be added to other callbacks to avoid handling stale events.
Issue: androidx/media#1334
PiperOrigin-RevId: 630068222
Set `VideoSink`'s offset during seeking in `MCVR.onPositionReset()`
This one is necessary in some cases, where `onProcessedStreamChange()` is not
invoked during a seek. For example, when seeking when playback has ended.
PiperOrigin-RevId: 630056723
To find the column of an index in a matrix the formula "column = index % width" should be used, not "column = index % height"
If inputFormat.tileCountVertical was equal to 1 then it would not throw an error, but instead result in the first tile of the bitmap always being returned. If inputFormat.tileCountVertical was larger than 1 then Bitmap.createBitmap() would throw an error as it would attempt to go outside the bounds of outputBitmap
ImageRenderTest has been updated to test for 2x3 images so that tileCountVertical != tileCountHorizontal. These tests passed previously because they were equal, so using tileCountVertical produced the same results as tileCountHorizontal
The last rebuffer time was being updated erroneously, even in the absence of rebuffering events, resulting in incorrect `bs` (buffer starvation) key in CMCD.
Issue: androidx/media#1124
PiperOrigin-RevId: 629731796
These subtitles were skipped because they are marked as shouldBeSkipped
based on their timestamps. The fix removes this flag entirely in
SimpleSubtitleDecoder because TextRenderer handles potential skipping
if needed.
PiperOrigin-RevId: 629717970
We currently enforce the skipping if the sample has a timestamp less
than the start time. While this may be the default desired behavior
for most implementations, it prevents an implementation from outputting
a sample with such a timestamp.
This change updates the logic to pre-fill the shouldBeSkipped flag
based on the input timestamp, and only check this flag on the output
buffer. None of the implementations in our library change timestamps
of samples, so this is equivalent to the previous code.
PiperOrigin-RevId: 629708873
`updateRebufferingState` is invoked immediately preceding this `if-else`, with no alteration of state occurring in between, making this invocation unnecessary.
PiperOrigin-RevId: 629694531
This lets apps update the task manager priority and send the
priority message to all renderers so that they can adjust their
resources if needed.
PiperOrigin-RevId: 629426058
This change also includes mapping the numeric ID3v1 codes to their
string equivalents before setting them into `MediaMetadata`. This
mapping already existed, but it was previously only used when parsing
MP4 `gnre` atoms.
Issue: androidx/media#1305
PiperOrigin-RevId: 629113480
When refreshing the media playlist, we should try to request via a url with [delivery directives](https://datatracker.ietf.org/doc/html/draft-pantos-hls-rfc8216bis#section-6.2.5). However, when initially loading the media playlist or when the last loading with delivery directives encountered an error, we should not allow using those directives.
PiperOrigin-RevId: 629060177
This change adds a 'free-form' text genre to the existing
`bear-id3.mp3` sample, and adds a new sample with a 'numeric' genre ([9
is Metal](https://mutagen-specs.readthedocs.io/en/latest/id3/id3v2.4.0-frames.html#appendix-a-genre-list-from-id3v1)).
The samples were modified with:
```shell
$ id3edit --set-genre "Gorpcore" bear-id3.mp3
$ id3edit --set-genre "9" bear-id3-numeric-genre.mp3
```
Reading the numeric genre with `exiftool` shows the mapping back to
'Metal':
```
$ exiftool bear-id3-numeric-genre.mp3 | grep Genre
Genre : Metal
```
The playback dumps don't contain the genre because it's not yet
propagated to `MediaMetadata.genre`. That is done in a follow-up
change.
Issue: androidx/media#1305
PiperOrigin-RevId: 629043506
This removes a window of inconsistency between the timeline
known to the player and the most recent timeline in the
`MediaSourceList` by removing the `MSG_DO_SOME_WORK` when
sending `MSG_PLAYLIST_UPDATE_REQUESTED`. `MSG_DO_SOME_WORK`
is then sent again when the playlist update is requested.
PiperOrigin-RevId: 629021752
Part of a two stage change to remove the conversion to linear colors in the SDR effects pipeline by default. Changes the boolean to an intdef, introducing a third option that gets all sdr input into the same colorspace.
This is a planned API breaking change, but this change should not change the behavior of the pipeline.
PiperOrigin-RevId: 629013747
`checkNotNull` was added to the `Object` variant in b83f12c4ba. It
doesn't seem to have caused any test failures, so I guess we never
pass `null` in here - and might as well update the annotation to match
reality. And then for consistency we should ban `null` from the
`byte[]` overload too.
PiperOrigin-RevId: 628419003
Some test cases are still using `ConcatenatingMediaSource`
even if they do not test specific features of the concatenating
source. Apparently these test have a slightly different timing
behavior when it comes to updating the `MediaPeriodQueue` and
emitting change events with analytics.
Using the playlist API ensures testing the future-proof code path.
PiperOrigin-RevId: 628413460
This ensures that `C.TIME_UNSET` is more clear in dump files. Some of
these call-sites will **never** pass `C.TIME_UNSET`, but it seems
clearest to always use `addTime` and maybe it will ensure when these
sites are copied in future, `addTime` will be used in the new location
too.
PiperOrigin-RevId: 628363183
Add ctts box implementation to handle muxing B-frame videos.
Add method convertPresentationTimestampsToCompositionOffset to
provide sample offsets. Return empty ctts box in case of video
does not contain B-frame. Add ctts box to MoovStructure to handle
muxing the video containing B-frames.
PiperOrigin-RevId: 628346257
The first has a string genre, and various other values set, generated
from `sample.mp4` with the command below [1].
The second has a numeric genre, to test `gnre` atom parsing. This
parsing is currently broken, the fix is in a follow-up change. This
file was also generated from `sample.mp4` with the command below [2].
This change also includes `CommentFrame.text` in its `toString`
representation, otherwise there's no difference between e.g. different
levels of `ITUNESADVISORY` in the extractor dump files.
Issue: androidx/media#1305
-----
[1]
```shell
$ AP_PADDING="DEFAULT_PAD=0" \
AtomicParsley sample.mp4 \
--artist "Test Artist" \
--album "Test Album" \
--tracknum 2/12 \
--disk 2/3 \
--year 2024 \
--genre "Gorpcore" \
--bpm 120 \
--compilation true \
--advisory clean \
--gapless true \
--sortOrder artist "Sorting Artist" \
--sortOrder album "Sorting Album" \
--preventOptimizing \
-o sample_with_metadata.mp4
```
[2]
```shell
$ AP_PADDING="DEFAULT_PAD=0" \
AtomicParsley sample.mp4 \
--genre "Metal" \
--preventOptimizing \
-o sample_with_numeric_genre.mp4
```
PiperOrigin-RevId: 628345458
This change also adds some runtime redirection of calls to
`Dumper.add(String, Object)` to `add(String, byte[])` if
`value instanceof byte[]`. This simplifies the implementation of
`PlaybackOutput.dumpIfNotEqual` and seems like a reasonable amound of
'magic' for a test utility.
Issue: androidx/media#1305
PiperOrigin-RevId: 628119473
This method is useful for cases where the target condition can
become true outside of a message on the main thread. To ensure we
don't execute the rest of the test method in parallel with other
code, we have to introduce artifical messages on the main thread
that check the target condition.
PiperOrigin-RevId: 628072444
Before this CL, the video sink was not reconfigured for the second video
in a sequence with video-image-video. For example, the stream offset
and listener were not set for the second video.
PiperOrigin-RevId: 628065991
This imports all the classes and resources needed by our code.
We still have the nominal dependency on the artifact as we need
to access the Parcelable CREATORs of MediaSessionCompat.Token,
MediaDescriptionCompat, RatingCompat and MediaBrowserCompat.MediaItem.
Mechanical import steps:
- Put all files under a new 'legacy' package and change all import
statements accordingly.
- Reformat to adhere to Media3 java style guide
- Remove all existing @RestrictTo annotations and replace them with
top-level @RestrictTo(LIBRARY) on all classes in the new package.
- Remove @NonNull annotations and fixed nullability test errors
- Fix HTML javadoc build errors
- Fix Lint errors (but not warnings)
The code still contains many lint warnings that will be fixed
separately.
PiperOrigin-RevId: 627999285
The tests were reigstering a listener to wait for the first event, but
this first even may have happened already by the time the listener is
registered. Instead we can wait until the controller is connected and
assume that the initial state already arrived.
PiperOrigin-RevId: 627683245
also makes the setter more flexible by ignoring the value of the setter when the output is hdr rather than throwing (since all HDR content must be have a linear color space)
PiperOrigin-RevId: 627388436
In some versions of Cronet, the request provided by the callback is not always the same. This leads to callback not completing and request timing out.
The fix changes from having one `UrlRequestCallback` per `CronetDataSource` to one `UrlRequestCallback` per `UrlRequest`. Everytime a current request is canceled, the current callback is closed.
PiperOrigin-RevId: 627379153
Instead of initializing the video sink outside the renderer with an
empty format for composition preview, we initialize it in the renderer
with the input format for video.
PiperOrigin-RevId: 627313708
Update the function convertPresentationTimestampsToDurationsVu
to return a list of duration in decoding order,used in the
creation of STTS boxes.
PiperOrigin-RevId: 627052898
When playing a Composition, the color transfer of an image is incorrectly
passed down to be SMPTE170M, but it should be SRGB.
PiperOrigin-RevId: 626425396
We currently check certain properties about inputColorInfo twice: once in checkColors in the DVFP and once when creating the samplers in the defaultshaderprogam. The inputcolorinfo shouldn't change between these two components so removing the checks in the shader program to have one source of truth for inputColorInfo checks, which will make the code simpler when it comes to adding to color-related features (like the ones related to removing de-gamma-ing)
PiperOrigin-RevId: 626400960
For LL-HLS, the non-primary playlists originally keep reloading even after the primary playlist has been changed to another one. The reason being this is to check if the hinted(#EXT-X-PRELOAD-HINT) resource has been published or removed. If removed, the loading of it should be canceled, per the suggestion in the HLS spec:
"A Client SHOULD cancel a request for a hinted resource if it is not present in a subsequent Playlist update, such as in an EXT-X-PRELOAD-HINT tag or as part of another tag such as EXT-X-PART. The client SHOULD ignore the results of such requests."
However, keeping the non-primary playlists reloading is not optimal. As a solution, we trigger the playlist reloading only when there is a preload chunk loading instead of every time after we have processed the playlist. Compared to the original implementation, this will save the requests of reloading non-primary playlist after we have taken action upon the preload chunk being published or removed.
Issue: androidx/media#1240
PiperOrigin-RevId: 626038032
This is the preparation to import the media1 classes as
private copies into media3.
- Reword Javadoc to use @code instead of @link to media1 types. This
avoids accidentally linking to the future internal types.
- Use fully qualified names for the converter methods to and from
MediaSessionCompat.Token to ensure they keep the publicly available
type.
- Add new public variable that is directly referenced from our code
instead of referring the the media1 equivalent.
- Clean up tests that are using media1 types to make assertions on
media3 fields and vice versa (mostly when using LegacyConversions
in the test method). This also makes the tests more DAMP than DRY.
(also moved LegacyConversionsTest to a unit test as it doesn't test
cross-process communication)
PiperOrigin-RevId: 626000082
Before this CL, if all the video (resp. audio) samples were fed before
the audio (resp. video) output format was reported, the
SequenceAssetLoader was incorrectly reporting a MediaItem change with a
null format.
PiperOrigin-RevId: 625978268
For audio with more than 12 channels, no channel mask was determined, which
meant that the code to check spatializability would throw because of creating
an invalid audio format.
Return early if the channel mask was invalid instead (and assume spatialization
isn't possible).
PiperOrigin-RevId: 625618683
Transformer's input shouldn't be constrained to the number of playable audio channels on the current device because the media may be edited (to mix channels for example) or encoded for playback on another device (a server for example).
PiperOrigin-RevId: 625604243
The raw audio decoder's output audio format is stereo when the number of input
channels is (for example) 10 channels. Add a temporary workaround that uses the
input channel count for raw audio. This code should be removed in future when
we bypass the decoder entirely for raw audio.
Tested manually on a WAVE file with 18 audio channels.
PiperOrigin-RevId: 625307624
Before this CL, currentInputBufferBeingOutput was set to null without
adding the buffer to the queue of available buffers, which was making
this buffer unusable. After multiple seeks, playback was stuck because
the AudioGraphInput had no input buffer left.
PiperOrigin-RevId: 624943271
Before this CL, the FrameMetadataListener was set in
onReadyToInitializeCodec while it had already been set when handling
message MSG_SET_VIDEO_FRAME_METADATA_LISTENER.
PiperOrigin-RevId: 624940824
Some seek operations are currently filtered in the base classes if
the target index is not explicitly specified and the implicitly
assumed operation doesn't have an obvious target index. (Example:
calling seekToNext() at the last item in a playlist)
This is too opinionated because the actual player implementation
using this base class may be able to handle this seek request (e.g.
by adding new items on the fly or using other logic to select
the most suitable next item).
This can be solved by forwarding all seek requests to the respective
handler methods even if they are a presumed no-op. Also clarify the
Javadoc that the provided index is just an assumption if it wasn't
provided explicitly in the method call.
PiperOrigin-RevId: 624887116
Before this CL, the offset was set:
- in onPositionReset for composition preview
- in onReadyToInitializeCodec for ExoPlayer
The code flow is easier to reason about if the path for both use cases
is as shared as possible.
PiperOrigin-RevId: 624870150
After this CL, Transformer will throw if the clipping start and end
positions are the same because MediaMuxer doesn't support writing a
file with no samples. This should work once we default to the in-app
muxer.
Issue: androidx/media#1242
PiperOrigin-RevId: 624861950
This was always intended as a debug API only, but its inclusion in media3.common and public visibility has led to partners sometimes experimenting with this API and complaining when it doesn't work as expected.
PiperOrigin-RevId: 624158798
A live window with changing duration can't be properly
displayed in a media notification. The duration constantly
changes and creates a nervous jumping seekbar that is not
really useful.
This change sets the duration for live streams to `C.TIME_UNSET`
when publishing the player state to the platform session. This
way no duration is sent to the platform session which prevents
media controls from drawing a seekbar.
Issue: androidx/media#1256
PiperOrigin-RevId: 624112541
This removes the TODOs without updating the links, because the
DAC-hosted images are not co-located with the hosted javadoc (unlike
when these images were referenced on exoplayer.dev before 10342507f7),
and therefore we would need to include the full path anyway, at which
point it seems clearer and more robust to keep using a fully-qualified
URL with the domain too.
PiperOrigin-RevId: 623452217
When delegating EMSG samples in `HlsSampleStreamWrapper`,
the offset passed into `sampleMetadata(..)` of the delegate
`TrackOutput` must be zero because it is called immediately
after `sampleData(..)` is called.
The condition to trigger this issue is that more than one
metadata samples are pending in `pendingMetadataSampleInfos`
of `FragmentedMp4Extractor` which produces non-zero offsets.
Issue: androidx/media#1002
Issue: androidx/media#1203
PiperOrigin-RevId: 623210835
Reduces flakiness of tests that assert on PCM audio. Tests now have to
clearly choose how they want the capturing muxer to handle pcm audio.
Note that the only dump files that have changed are those that deal
with PCM audio (.wav, sowt, twos, silence). Because of the continuous
nature of PCM, timestamps are not part of the dump.
PiperOrigin-RevId: 623155302
Compared to `release`, the `reset` method doesn't release the preload manager instance. This applies to the use case that an app wants to discard all the sources but keep the preload manager active for later usage.
Also rename the `releaseSourceInternal` to `removeSourceInternal`, as the latter sounds more generic for different preload manager implementations.
PiperOrigin-RevId: 623148723
In offloaded audio playback, the `DefaultAudioSink` should use the `AudioTrack.StreamEventCallback` `onPresentationEnded` to note whether the AudioTrack has completed playing all pending data.
PiperOrigin-RevId: 622885399
The androidx.media library is only used for its compat MediaStyle.
On API 21 and above, the logic can be easily inlined, and only
on API < 21, the androidx.media handling can be used.
This allows to remove the androidx.media dependency completely
once the minSdk has been increased to 21.
PiperOrigin-RevId: 622855469
Both `remove(MediaItem)` and `remove(MediaSource)` return a boolean suggesting that whether the preload manager is holding the corresponding `MediaSource` and it has been removed.
PiperOrigin-RevId: 622185427
This change makes sure the `DefaultLoadControl` would work
when passed to multiple players. It makes sure and unit tests
that the loading state of a player is maintained for each player
that is using `DefaultLoadControl`.
The targetBufferSize of the `DefaultAllocator` is increased
linearly for each player and memory is allocated in a simple
first-come-first-serve manner.
PiperOrigin-RevId: 622126523
The join mode is used for two cases: surface switching and mid-playback
enabling of video.
In both cases, we want to pretend to be ready despite not having rendered
a new "first frame". So far, we also avoided force-rendering the first
frame immediately because it causes a stuttering effect for the
mid-playback enable case. The surface switch case doesn't have this
stuttering issue as the same codec is used without interruption. Not
force-rendering the frame immediately causes the first-frame rendered
callback to arrive too early though, which may lead to cases where
apps hide shutter views too quickly.
This problem can be solved by only avoiding the force-render for the
mid-playback enabling case, but not for the surface switching case.
PiperOrigin-RevId: 622105916
This API additions help an app to implement the lifecycle of a MediaSessionService
properly and in consistency with the `MediaSessionService` being in the foreground
or not.
Not properly implementing `onTaskRemoved` is the main reason for crashes and
confusion. This change provides `MediaSessionService` with a default
implementation that avoids crashes of the service. This default implementation
uses the new API provided with this change just as an app can do.
Issue: androidx/media#1219
PiperOrigin-RevId: 621874838
Makes OverlayFrameAnchor works as described in the OverlaySettings documentation. Currently the code does the opposite e.g setting the anchor to (+1,-1) makes the code anchor to the top left rather than the bottom right.
PiperOrigin-RevId: 621585558
Otherwise, apps overriding BitmapOverlay.getVertexTransformation may not
realize this is being done, and may ask why bitmaps are flipped vertically from
what they expect
Reference: https://github.com/androidx/media/issues/1128
PiperOrigin-RevId: 621544348
Also explicitly use a synchronized list to collect cues. The previous
bare `ArrayList` was probably fine, because the `ConditionVariable`
creates a memory barrier between the main thread and the test thread,
but this seems more explicit (and any performance implications of the
synchronization don't matter for this test).
PiperOrigin-RevId: 621523824
the output format conatins key information about the output of the assetloader being hdr, so we must signal the output format, not the input format to the sample exporter
fixes mh ultraHdr test failures.
Also discovered images created are very device specfic so got rid of the pixel tests, we have pixel tests in the effects library that cover the same case.
PiperOrigin-RevId: 619899249
If the mixer is reset without resetting maxPositionOfRemovedSources and
then reused, the value of maxPositionOfRemovedSources can be outdated,
leading to an incorrect number of bytes being output by the mixer.
PiperOrigin-RevId: 619832502
calculate based on the output of consecutive calls rather than the speed provider speed change point to ensure the timestamps are monotonically increasing.
PiperOrigin-RevId: 619584001
Since the public class has already been split into `Mp4Muxer` and
`FragmentedMp4Muxer`, there is no need for having common interface
for internal implementation.
In the follow up CL `BasicMp4Writer` will be renamed to `Mp4Writer`
which is more appropriate and aligns with public class names.
PiperOrigin-RevId: 619486876
With this CL:
- The large timestamp offset added by ExoPlayer so that decoders
don't see any negative timestamps is removed before passing the
timestamp to the AudioGraph.
- Clipped media timestamps are offset by the clipping start position
before being passed to the AudioGraph.
- The offset added to the audio buffer timestamps is removed when
computing the audio sink position, to convert them back to the
timestamps passed by the player.
PiperOrigin-RevId: 619225990
This CL aims to separate Fragmented MP4 related logic in a separate public class.
Earlier all the logic was in a single class `Mp4Muxer`.
PiperOrigin-RevId: 619206661
The workaround check is now part of CTS and we should be able
to rely on the PerformancePoints values (or at least can be sure
that they cover all CDD requirements)
#minor-release
PiperOrigin-RevId: 619201331
This property is transformer specific and does not belong to
muxer interface.
This is to eventually replace muxer interface in Transformer module with
muxer interface in Muxer module.
PiperOrigin-RevId: 618895836
This ensures MediaMetadata with just non-null extras is not
considered equal to MediaMetadata.EMPTY. This makes sure the
contents are bundled when a controller sets the extras in a
new MediaItem
Issue: androidx/media#1176
#minor-release
PiperOrigin-RevId: 618876642
These TODOs precede <unknown commit> when the group was set in the top-level
`build.gradle` file.
Issue: androidx/media#1215
PiperOrigin-RevId: 618835040
The immediate plan is to replace `Transformer Muxer interface`
with this one.
It was not straight forward to move/change `Transformer Muxer interface`
hence this intermediate step.
The follow up CL will also remove fragmented MP4 related code from
`Mp4Muxer` and move it into `FragmentedMp4Muxer implements Muxer`.
PiperOrigin-RevId: 618789265
This is the most widely-used test-skipping method I'm aware of, so I figured this
would be a great method to scale usage of AssumptionViolatedException.
PiperOrigin-RevId: 618160931
Issue: androidx/media#725
Ideally the test to transmux a `ts` file (having 3 bytes NAL start code)
should go into `Mp4MuxerEndToEndTest`but `Mp4MuxerEndToEndTest` uses `MediaExtractor` and `MediaExtractor` is returning samples with `4 byte NAL start code` which will not exercise the newly added code path.
Hence the test is added in `TransformerWithInAppMuxerEndToEndTest` which
internally uses `media3 extractor` and feeds samples with `3 bytes NAL start code`
only.
PiperOrigin-RevId: 617985866
Seeking will consist of the following steps:
- Block the AudioGraph input data.
- Flush the AudioGraph.
- Seek the ExoPlayers.
- Unblock the AudioGraph input data.
PiperOrigin-RevId: 617868124
The original change did not set the color info in the codec
for standard SDR infos. This was meant to help with consistency
to avoid a situation where the information is partially set and
later the bitstream provides slightly different values (all in
standard SDR though).
We can revert this part because the bitstream may change anyway
and the decoder needs to handle this internally. And more
importantly, it also avoids removing this information when encoding
the format again in Transformer.
PiperOrigin-RevId: 617582066
This refactoring is required to support 3 byte NAL start code, in which
the sample ByteBuffer might change after AnnexB to Avcc conversion.
This would required changes in the corresponding BufferInfo as well.
PiperOrigin-RevId: 617538338
Some media can read color info values from the bitstream
and may partially set some of the SDR default values in
Format.ColorInfo. Setting these default values for SDR can
confuse some codecs and may also prevent adaptive ABR
switches if not all ColorInfo values are set in exactly the
same way.
We can avoid any influence of HDR color info handling by
disabling setting the color info MediaFormat keys for SDR
video and also avoid codec reset at format changes if both
formats are SDR with slightly different ColorInfo settings.
To identify "SDR" ColorInfo instances, we need to do some
fuzzy matching as many of the default values are assumed to
match the SDR profile even if not set.
Issue: androidx/media#1158
PiperOrigin-RevId: 617473937
The AV1 video stream does not contain NAL unit which is a concept
specific to H.264/H.265.
This was not caught before muxer does an in place replacement of
`NAL start code` with `NAL length`. In the absence of `NAL start code`
it was automatically a no-op.
PiperOrigin-RevId: 617193317
nullness checks were removed a while ago from editing, so no need for them now.
Bit neater to have less code to parse too.
Also, removes RequiresNonNull
PiperOrigin-RevId: 616887502
This also makes it more consistent with newer testId tests that don't have nullness, so tests don't look inconsistent, and was pretty easy to do :P
PiperOrigin-RevId: 616856888
This was broken by 2fa38d15dd, which added an assumes
method, but missed the `!` operator for the tests where HDR is
unsupported. Add an assumes method that assumes a lack of support
for HDR.
Tested on the failing device (Pixel 7) and confirmed this fixes
the test on that device, to throw AssumptionViolatedException
instead of allowing test logic to run after failing the
assumption.
PiperOrigin-RevId: 616846588
Add a new method `onUsedByPlayer(PreloadMediaSource)` for `PreloadMediaSource.PreloadControl`, which will be invoked when the player starts to use the `PreloadMediaSource`, or calling `PreloadMediaSource.preload` while the player is already using that source. `DefaultPreloadManager` will immediately preload the next source when receiving `onUsedByPlayer` event.
PiperOrigin-RevId: 616789121
Confirmed that the HLG extension displays properly on Pixel 7 Pro, API 34 and Samsung S24, API 34. On these devices, this fixes the washed out HLG preview issue on API 34, where the PQ ext had a washed out look, and where the HLG ext is supported (this bug didn't occur on API 33, only 34).
More info on manual tests done to sanity-check:
* Test cases: Transformer debug SurfaceView and ExoPlayer.setVideoEffects
* Test inputs: HLG and PQ
* Test devices: Pixel 7 Pro (API 33 & 34), Samsung Galaxy S24 (API 34)
* Added debugging: Logging colorInfo used in GlUtil.createEglSurface
No regressions were seen. HLG extension is used more in API 34, and behavior stays the same on API 33. Only human-visible change without logging is that HLG content looks better on API 34, for Samsung S24 and Pixel 7 Pro.
PiperOrigin-RevId: 616131192
It's a bit arguable whether the `Subtitle` implementation supports
zero-duration events, since `getEventTimeCount` is documented as
effectively "the number of times the cues returns by `getCues(long)`
changes", and zero-duration events violate that. However, the current
`WebvttSubtitle` impl **does** produce zero-duration events, so it
seems safer to handle them gracefully here and then, as a possible
follow-up, fix the `WebvttSubtitle` impl (or remove it completely).
Issue: androidx/media#1177
#minor-release
PiperOrigin-RevId: 616095798
When flushing the AudioGraph, the AudioMixer will be preserved but the
sources will be recreated. This is probably a bit less efficient but
makes the logic simpler. Indeed, if we had to keep the sources alive,
we would need to add a way to reconfigure them with a new timestamp for
seeking. We would also need to change the way sources are ended because
they are currently removed when they are ended. Also, it is acceptable
to have a small delay when seeking, which means that performance is less
critical than for playback.
PiperOrigin-RevId: 615775501
getSupportedEncoderNamesForHdrEditing became getSupportedEncodersForHdrEditing at some point, but this comment wasn't updated before...
PiperOrigin-RevId: 615712707
Renderers may be enabled for subsequent media items as soon as the current media item's renderer's isEnded() returns true. Currently, when a player is set to pause, it stops all renderers that are `STATE_STARTED`. When a player is set to play, it starts all renderers that are enabled. This would include renderers that were enabled early for the subsequent media item. The solution is to only start renderers that are enabled by the current playing period.
Issue: androidx/media#1017
PiperOrigin-RevId: 614734437
This should already be the default, but some devices seem
to not adhere to this contract and assume the default is unset.
Issue: androidx/media#1169
PiperOrigin-RevId: 614697283
Some devices just don't work very well with the synchronous
model, but are currently still excluded from our approximate
API 31 check. This change allows to include additional devices
or device groups by passing in the Context to the default
adapter.
It also adopts the workaround added in ebceee08c6
for Fire TV Smart devices that exhibit this issue.
PiperOrigin-RevId: 614642545
Some FireOS6 devices ask to force the external surround global
flag and ignore any signals from the HDMI connection.
This is the equivalent change of e341944d1e
PiperOrigin-RevId: 614634499
Having a default icon available allows apps to only specify the
icon constant without having to define an icon drawable themselves
as Media3 can fill in the icon resource for backwards compatibility.
The switch util method allows R8 to easily remove unused icons, so
having default icons won't affect APK size unless the constants are
used to set up the CommandButtons.
PiperOrigin-RevId: 614623909
Using the more accurate check available on later API versions
first is likely better than falling back to a fallback solution
from older API versions.
PiperOrigin-RevId: 614612628
minor fix for arithmetic error in calculated added in f4c60c52b9 (speed is outputTime (change in y) divided by inputTime (change in x), this calculation is inverted in code).
Changed test to cover the case.
PiperOrigin-RevId: 613966027
These input types include images, video without audio, and video with audio.
While playing these inputs, the video frame presentation is always synced with
audio.
PiperOrigin-RevId: 613921719
This check is already present in `DataSpec.Builder.build()` but there
are many public constructors which bypass the builder (only some of
which are deprecated), so this adds an additional check.
PiperOrigin-RevId: 613908358
Also remove intermediate object allocations in
`Util.toByteArray(int...)`.
`Util.toByteArray(InputStream)` is kept (but deprecated) because it's
been part of the library for a while and might be in use by some apps.
The others are much newer, so the chance of usages outside the library
is very low, so we just remove them directly.
PiperOrigin-RevId: 613878453
The implementation of these methods is changed in a follow-up CL, and
these tests help to ensure nothing breaks.
This doesn't include tests for `toByteArray(InputStream)` or
`toByteArray(int)` because these implementations are fully replaced by
Guava equivalents in a follow-up CL.
PiperOrigin-RevId: 613581845
This is the only `build.gradle` file that currently doesn't apply this
config, and it seems to lead to desugaring errors when apps depend on
the library locally.
PiperOrigin-RevId: 613559535
Renderers may be enabled for subsequent media items as soon as the current media item's renderer's isEnded() returns true. When a renderer is being enabled and the player is 'playing', that renderer is also started. When playing a mixed playlist of images and content with audio & video, the player may skip some image items because the early-starting of the audio renderer causes a clock update.
A solution is to only start the "early-enabled" renderers at the point of media transition and add a condition on DefaultMediaClock to use the standalone clock when reading-ahead and the renderer clock source is not in a started state.
Issue: androidx/media#1017
PiperOrigin-RevId: 613231227
The old methods are deprecated and are called from the new
method for backwards compatibility of custom implementations.
'DefaultLoadControl' is unchanged, but `ExoPlayerImplInternal`
already calls the new methods passing in the `PlayerId`,
PiperOrigin-RevId: 613197190
Pass firstAssetLoaderOutputFormat to videoSampleExporter for non-video use cases, so that the downstream components like the videoFrameProcessor can be set up with the right output color. Surface creation is still in the VSP so can't do this for all use cases currently.
also moves getDecoderOutputColor() to TransformerUtil, since it is used in multiple places and doesn't make sense for once to have reference to the other.
PiperOrigin-RevId: 613113958
We currently update this value for controllers to match the
availability of the associated command. This however makes it
impossible to mark a button as unavailable if the command is
available. This can be refined by only setting the 'enabled'
field to false if the command is not available, not the other
way round. And we should also enable the button by default as
disabling is the unusual case not many apps will use.
In addition, this change fixes missing update logic when the
player commands changed and it adds some additional test coverage
for all these cases.
PiperOrigin-RevId: 612881016
`BasePreloadManager` coordinates the preloading for multiple sources based on the priorities defined by their `rankingData`. Customization is possible by extending this class. Apps will implement `TargetPreloadStatusControl` to return preload manager the target preload status for a given `rankingData` of the source.
`DefaultPreloadManager` extends from the above base class and uses `PreloadMediaSource` to preload media samples of the sources into memory. It also uses an integer `rankingData` that indicates the index of an item on the UI, and the priority of the items is determined by their adjacency to the current playing item. Apps can set the index of current playing item via `DefaultPreloadManager.setCurrentPlayingIndex` when the user swiping is detected.
PiperOrigin-RevId: 612829642
The removed check searched for a player command inside a list of
session commands, which is not allowed by the IntDef definition
and only worked because both types map to a Java int.
PiperOrigin-RevId: 612758442
Plumbing hdrMode through the default asset loader factory via the constructor is problematic because it breaks API boundaries. It means there is another way to set hdrMode outside of Composition.java and TransformationRequest.java, which is error prone and cause problems if someone an app starts customizing the assetloaderfactory. It also means custom asset loaders can't receive this information without hacking around.
The introduction of the composition-level settings class makes this approach easily extensible for other settings applied on the composition level but use in an individual asset level basis (e.g. ultraHDR support).
PiperOrigin-RevId: 611466920
Add abilitiy to use real surfaces in instrumentation tests
using the ActivityScenarioRule and an activity class for testing
purposes.
PiperOrigin-RevId: 611421490
When the controller replaces the current item, the masking position will be changed to the default position of the new item for a short while, before the correct position comes from the session. This will interrupt the current position fetched from the controller when the playback doesn't interrupted by the item replacing.
Issue: androidx/media#951
#minor-release
PiperOrigin-RevId: 611417539
This implementation generates lint errors because neither the `first`
nor `second` parameters are used, and that's generally
unexpected/incorrect for a `Comparator` implementation since it should
always consider both its parameters.
PiperOrigin-RevId: 611039632
This change aims to prioritise tracks that have a 'smooth enough for
video' frame rate, without always selecting the track with the highest
frame rate.
In particular MP4 files extracted from motion photos sometimes have two
HEVC tracks, with the higher-res one having a very low frame rate (not
intended for use in video playback). Before this change
`DefaultTrackSelector` would pick the low-fps, high-res track.
This change adds a somewhat arbitrary 10fps threshold for "smooth video
playback", meaning any tracks above this threshold are selected in
preference to tracks below it. Within the tracks above the threshold
other attributes are used to select the preferred track. We deliberately
don't pick the highest-fps track (over pixel count and bitrate), because
most users would prefer to see a 30fps 4k track over a 60fps 720p track.
This change also includes a test MP4 file, extracted from the existing
`jpeg/pixel-motion-photo-2-hevc-tracks.jpg` file by logging
`mp4StartPosition` in
[`MotionPhotoDescription.getMotionPhotoMetadata`](b930b40a16/libraries/extractor/src/main/java/androidx/media3/extractor/jpeg/MotionPhotoDescription.java (L123))
and then using `dd`:
```
mp4StartPosition=2603594
$ dd if=jpeg/pixel-motion-photo-2-hevc-tracks.jpg \
of=mp4/pixel-motion-photo-2-hevc-tracks.mp4 \
bs=1 \
skip=2603594
```
----
This solution is in addition to the `JpegMotionPhotoExtractor` change
made specifically for these two-track motion photos in
5266c71b3a.
We will keep both changes, even though that change is not strictly
needed after this one, because adding the role flags helps to
communicate more clearly the intended usage of these tracks. This
change to consider FPS seems like a generally useful improvement to
`DefaultTrackSelector`, since it seems unlikely we would prefer a 5fps
video track over a 30fps one.
Issue: androidx/media#1051
PiperOrigin-RevId: 611015459
This new test is for `ExoPlayer.setVideoEffects()`. It plays the
one-second-long video, applies an overlay that prints the video frame timestamp
onto the frame, captures the output frame and compares the captured output
frame with golden.
PiperOrigin-RevId: 610781590
These audio offload failure recovery tests model the DefaultAudioSink failing at audio track init and write operations in offload mode. Playback should recover and try again as DefaultAudioSink will disable offload mode.
PiperOrigin-RevId: 610372935
Some devices supporting Performance Points for decoder coverage are missing coverage over the CDD requirements for H264. For these cases ExoPlayer should fall back to legacy resolution and frame rate support checks. If there is a stream evaluated as a PerformancePointCoverageResult of COVERAGE_RESULT_NO, then ExoPlayer checks for coverage of the 720p H264 CDD requirement.
Issue: google/ExoPlayer#10898
Issue: androidx/media#693
Issue: androidx/media#966
PiperOrigin-RevId: 609740128
Even when there's no display surface, MCVR can render frames to VFP, becuase by
the time the frame is processed:
- If there's still no surface, VFP will drop the frame;
- If there's surface, the processed frame would be rendered.
In short, placeholder surface is not needed in effect enabled playback. FWIW,
it is used to swallow frames directly from MediaCodec when there's no output
surface.
PiperOrigin-RevId: 609705222
This change makes ExoPlayerImplInternal.releaseInternal() unblock the
app thread if a runtime exception is thrown while releasing components
from the playback thread.
Before this change, if a runtime exception occurred during releasing
components in the playback thread, ExoPlayer.release() would wait for
`releaseTimeoutMs` and then raise a player error. With this change,
the player error is reported only when the playback thread is blocked
but if there is a runtime exception, the application thread is
unblocked.
The impact of this change is potentially fewer ANRs on
ExoPlayer.release() at the expense of less error reporting.
PiperOrigin-RevId: 609702549
We forgot to add it when we added AudioSink.release(). The commit
includes a test that ensures ForwardingAudioSink overrides all the
methods defined in the AudioSink interface.
PiperOrigin-RevId: 609402258
If the reading period has already advanced and a track reselection procs that only affects the reading period media, then ExoPlayer may try and apply the reading period's track selection incorrectly unto the playing period. ExoPlayer should apply the playing period's track selection to the playing period instead.
PiperOrigin-RevId: 609375077
If render error occurs due to AudioTrack initialization failure in offload mode, then ExoPlayer should allow retry as subsequent attempt will be with DefaultAudioSink disabling offload.
PiperOrigin-RevId: 609304897
The `PreloadMediaPeriod.selectTracksForPreloading` can be called for multiple times at the preloading stage (before the period is being played). For example, when the period resumes preloading. This change fix the assertion failure in `ProgressiveMediaPeriod.selectTracks` caused by the wrong implementation of `PreloadMediaPeriod.selectTracksForPreloading` when it is trying to retain the previously preloaded streams.
Also the `TrackSelectorResult` parameter is changed to a list of `ExoTrackSelection`. We should compare the selections only rather than considering the `RendererConfiguration` in the `TrackSelectorResult` to decide whether to retain the streams, as for preloading case the renderers haven't consumed the samples yet.
PiperOrigin-RevId: 609126868
Previously, the track format was used in VideoSampleExporter. Now, we use a
simulated decoder output format.
As the last expected change for this bug, also adds release notes
PiperOrigin-RevId: 609080629
Also introduce a fluent API that allows callers to ignore non-fatal
errors (while avoiding adding boolean overloads for every method).
**Most** tests want to fail on non-fatal errors (since they likely
indicate user-visible issues like codec errors etc), only tests
explicitly testing fallback in error scenarios should want to ignore
them.
Before this change there were a few `playUntilXXX` methods. These can
now all be triggered via `play(player).untilXXX`, which means
effectively every 'until' condition is available in a 'play until'
variant that calls `play` just before waiting for the condition.
PiperOrigin-RevId: 608988234
MediaCodec docs already allude to potentially mismatching H.264 level
between container and bitstream. Relax the initialization data check to
reflect this.
PiperOrigin-RevId: 608942322
When applying edit lists, we need to output the last partial samples
to have all the necessary data needed for rendering.
The only case where we can omit the sample is for zero duration
audio data that has no additional information.
The current comment and variable name doesn't make this very clear
and this change improves the naming and the comment.
PiperOrigin-RevId: 608579746
There is no super test which covers whole MP4 structure.
In all the E2E test, it verified against `ExtractorOutput` which
would remain same if there are changes in the box structure.
PiperOrigin-RevId: 608310006
These were previously somewhat supported, but the `package` part was
never read (so it only worked if it was either absent or the same as the
current application's package). This change parses and uses the
`package` part.
This partially reverts 35121a2d3d.
This is hard to test for the same reasons as 88f554c74b:
> This is hard to test because to do so robustly requires being able to guaranteed that another test APK will be installed with a known raw resource inside it.
PiperOrigin-RevId: 608270463
This change:
1. Updates the implementation of
`FrameworkMediaDrm.requiresSecureDecoder` to include the
'force allow insecure decoder' workaround logic.
2. Removes the 'force allow insecure decoder' logic from MCR
3. Removes the `requiresSecureDecoder` field from MCR (it can just
be a local derived from `codecDrmSession` now).
PiperOrigin-RevId: 607664186
The behaviour and docs of `playUntilPosition` were changed in
00c7a9bcbb.
This change also affects `playUntilStartOfMediaItem` (since it delegates
to `playUntilPosition`), so the same doc change should also be made
here.
#minor-release
PiperOrigin-RevId: 607364897
Also put back a comment in DownloadTracker that is still relevant on API 19.
Also deprecate PlaceholderSurface.newInstanceV17() in favour of just
newInstance()
VideoFrameProcessor requires every input frame to be registered before they are
rendered to its input Surface. This CL adds the option to register the input
frame only once. This is useful for camera inputs where not all input frames
come with changing FrameInfo.
PiperOrigin-RevId: 606294894
Our previous test video was difficult to use for testing our tone-mapping
algorithm, because it didn't have many different colors. Use a better
video for tone-map tests, by having one with more different colors
PiperOrigin-RevId: 606274843
These allow to set the icon in a standardized way without needing
custom bitmaps or resources. For now, this is just additional
information without backwards-compatible icons or implications.
The same value gets written to the platform session via a new
extras key that can be read and set from sessions not using Media3
yet.
PiperOrigin-RevId: 605670988
The public APIs of these modules reference symbols in some of their
dependencies, so these should be API dependencies, not implementation:
> An API dependency is one that contains at least one type that is
> exposed in the library binary interface, often referred to as its ABI
> (Application Binary Interface).
https://docs.gradle.org/current/userguide/java_library_plugin.html#sec:java_library_recognizing_dependencies
Transformer also uses symbols from `lib-common`, but these are already
an API dep of `lib-exoplayer` so no need to duplicate that here.
PiperOrigin-RevId: 605660621
TestUtil class is more appropriate for the given method.
In the next CL, the only method in FileUtil.java will be moved back
into transformer library and the FileUtil class will be removed.
PiperOrigin-RevId: 605648034
The new API will take both `creation time` and `modification time`.
Till now, Mp4Muxer wrote `modification time` in both
`creation time` and `modification time` field, which was
incorrect.
PiperOrigin-RevId: 605590623
Previously, we missed the BT2020->BT709 color-space conversion.
A user-visible impact of this is that red and green channels used to be
undersaturated, but now are more correctly saturated.
PiperOrigin-RevId: 605411926
Change the file extension retrieval back to how it was before 5488d33da8 to reduce the change of false negatives in `isImage()`
PiperOrigin-RevId: 605281186
`Uri.appendQueryParameter` is documented to encode its arguments, so
calling `Uri.encode` beforehand results in double-encoding.
Issue: androidx/media#1075
#minor-release
PiperOrigin-RevId: 604995441
The track id must be the index in the list of published tracks
as it's used as such elsewhere. This is currently not true if we
skip an empty track as all subsequent tracks get a wrong or even
invalid id.
#minor-release
PiperOrigin-RevId: 604929178
Relax the regex to only check for hyphen which is required by the specification.
Issue: androidx/media#1028
#minor-release
PiperOrigin-RevId: 604719300
Earlier implementation compared the whole file against a golden
data. The new implementation compares only the metadata being tested.
This will avoid updating the golden data when any unrelated change
(unrelated to scenario being tested) is made.
Added a separate test to compare the whole output file against a golden data.
PiperOrigin-RevId: 604692985
The current implementation of `JpegMotionPhotoExtractor.sniff` returns
`true` for any image with Exif data (not just motion photos). Improving
this is tracked by b/324033919. In the meantime, when we 'extract' a
non-motion photo with `JpegMotionPhotoExtractor`, the result is
currently a single empty image track and no video track (since there's
no video, since this isn't a motion photo). This 'empty' image track
is usually used to transmit metadata about the video parts of the
image file (in the form of `MotionPhotoMetadata`), but this metadata is
also (understandably) absent for non-motion photos. Therefore there's
no need to emit this image track at all, and it's clearer to emit no
tracks at all when extracting a non-motion photo using
`JpegMotionPhotoExtractor`.
This change also removes a `TODO` that is misplaced, since there's no
image bytes being emitted here (and never was).
PiperOrigin-RevId: 604688053
These are often the same for image tracks, since we usually drop the
whole image file (both the container and actual encoded image bytes)
into a single sample, but there are cases where we emit a track with
`containerMimeType=image/jpeg` but **no** samples (from
`JpegMotionPhotoExtractor`, to carry some metadata about the image +
video byte offsets).
It's therefore more correct to implement the `supportsFormat` check
based on `sampleMimeType`, so that these 'empty' image tracks are not
considered 'supported' by `ImageRenderer`.
#minor-release
PiperOrigin-RevId: 604672331
This was already done for the TrackGroup ids in <unknown commit>,
but in some scenarios only the Format instances are known and
it's helpful to be able to identify where they came from.
Issue: androidx/media#883
#minor-release
PiperOrigin-RevId: 604644039
This ensures RequestMetadata with just non-null extras is not
considered equal to RequestMetadata.EMPTY. This makes sure the
contents are bundled when a controller sets the extras in a
new MediaItem.
PiperOrigin-RevId: 604632788
Add a test for this consistency in `CompositeSequenceableLoaderTest`,
and also make the
`CompositeSequenceableLoaderTest.FakeSequenceableLoader` implementation
more realistic.
#minor-release
PiperOrigin-RevId: 604604103
This reverses 27caeb8038
Due to the re-ordering of packets done in `CeaDecoder`, there's no way
to use the current implementation to correctly parse these subtitle
formats during extraction (the `SubtitleParser` interface), so we have
to keep the `SubtitleDecoder` implementations.
#minor-release
PiperOrigin-RevId: 604594837
This reverses 94e45eb4ad
Due to the re-ordering of packets done in `CeaDecoder`, there's no way
to use the current implementation to correctly parse these subtitle
formats during extraction (the `SubtitleParser` interface), so we have
to keep the `SubtitleDecoder` implementations.
#minor-release
PiperOrigin-RevId: 604350951
Before supporting transmuxing when both no op effects and regular rotations are set, move setting the muxerWrapper rotation out of shouldTranscodeVideo() to ensure the muxerWrapper rotation is only set at the appropriate times.
This cl also ensures the state between the muxerWrapper and the list of video effects is consistent by clearing the list of videoEffects in trim optimization. If trim optimisation is being applied, then EditedMediItem.effects.videoEffects only contains no-op effects or regular rotations that get be applied in the muxer wrapper. Therefore, we should clear the list of video effects to ensure that no effect gets applied twice.
PiperOrigin-RevId: 604292052
removing the useHdr parameter from queueInputBitmap() it suggests we support changing between HDR and SDR within a stream, which we don't support. instead, identifying whether to use HDR from the shaderprogram which is informed by the inputColorInfo when the stream is registered.
PiperOrigin-RevId: 603681736
Transformer export and ExoPlayer previewing both read inputColorInfo from
registerInputStream now, instead of maintaining a consistent input color
throughout multiple streams in a sequence.
Therefore, we can remove inputColor-related arguments and methods now.
PiperOrigin-RevId: 603423509
If nullness should result in an exception, we should throw as soon as possible,
so that stack traces are easier to follow.
Did a quick scan of media3.effect+transformer and this covers all uses of
peek that immediately throw there.
PiperOrigin-RevId: 603393366
The new test introduced in 45bd5c6f0a is flaky because we only
wait until the media is fully buffered. However, we can't fully
control how much of this data is initially read by the Robolectric
codec and thus the output dump files (containing these codec
interactions) are flaky.
This can be fixed by fully playing the media once and then seeking
back instead.
#minor-release
PiperOrigin-RevId: 603324068
If seeking between last image sample and end of the file where the current stream is not final, then EoS sample will not be provided to `ImageRenderer`. ImageRenderer must still produce the last image sample.
PiperOrigin-RevId: 603312090
The implementation of fragmented MP4 caused a regression where muxer
started writing empty tracks even for non fragmented MP4.
PiperOrigin-RevId: 603091348
VideoFrameProcessor treats BT601 and BT709 as roughly equivalent now, so we
shouldn't be making checks that assume BT709 <-> requires tone-mapping.
Also, the color transfer is a better determinant for tone-mapping than color range, so use just the transfer to determine if tone-mapping is required.
PiperOrigin-RevId: 603083100
The `MediaMuxer` (FrameworkMuxer) supports AV1 mime type from API 34.
For this to work track `Format/MediaFormat` must have `CSD`
data.
Change also include providing AV1 option in demo app.
Transmuxing of an AV1 mime type input will not work because
`Extractor` does not extract AV1 CSD data.
Verified changes manually via demo app.
PiperOrigin-RevId: 603002380
- Added back parsing of scheme data for version 1 as it's technically
allowed by the spec.
- Made constructor of PsshAtom private to only publish the data class
and not the constructor.
- Formatting and Javadoc adjustments
- Additional tests
