The former is deprecated and replaced by the latter in Mockito 2. However, there is a
functional difference: ArgumentMatchers will reject `null` and check the type
if the matcher specified a type (e.g. `any(Class)` or `anyInt()`). `any()` will
remain to accept anything.
PiperOrigin-RevId: 250458607
Removes the need for duplicate calls to SampleQueue#read when
implementing DecryptionResources acquisition in the MediaSources.
PiperOrigin-RevId: 250298175
According to Cue's constructor (for bitmaps) documentation:
+ cuePositionAnchor does horizontal anchoring.
+ cueLineAnchor does vertical anchoring.
Usage is currently inverted.
Issue:#5633
PiperOrigin-RevId: 250253002
The only known use case for contentTypePredicate is to catch
the case when a paywall web page is returned via a DataSource,
rather than the data that was being requested. These days streaming
providers should be using HTTPS, where this problem does not exist.
Devices have also gotten a lot better at showing their own
notifications when paywalls are detected, which largely mitigates
the need for the app to show a more optimal error message or
redirect the user to a browser.
It therefore makes sense to deprioritize this feature. In
particular by removing the arg from constructors, where nearly
all applications are probably passing null.
PiperOrigin-RevId: 249634594
This prevents further unexpected updates if the MediaSource happens to
finish its preparation at a later point.
Issue:#5915
PiperOrigin-RevId: 249439246
The SurfaceListener just sets the surface on the VideoComponent, but
SphericalSurfaceView already accesses the VideoComponent directly so it seems
simpler to update the surface directly.
PiperOrigin-RevId: 249242185
We are currently defaulting to targetSdk=1 as no targetSdk is specified. Only
tests which explicitly ask for another SDK use another test SDK. With the
versioned manifest, all tests run using the targetSDK by default.
PiperOrigin-RevId: 249060796
If a PlayerMessage throws an exception, it is currently not deleted from the
list of pending messages. This may be problematic as the list of pending
messages is kept when the player is retried without reset and the message is
sent again in such a case.
PiperOrigin-RevId: 247414494
Adding an explicit option to clear all downloads prevents repeated database
access in a loop when trying to delete all downloads.
However, we still create an arbitrary number of parallel Task threads for this
and seperate callbacks for each download.
PiperOrigin-RevId: 247234181
1. A content session after an ad has been played was not re-marked as active,
leading to new ad session being marked as active too early.
2. Switching from content to post-roll ended the content session because
the return value of getAdGroupTimeUs of C.TIME_END_OF_SOURCE was not
handled. Using the nextAdGroupIndex instead.
PiperOrigin-RevId: 246977327
As justification for why we should not have this type of logging,
it would scale up to about 13K LOC, 1800 Strings, and 36K (after
pro-guarding - in the case of the demo app) if we did it through
the whole code base*. It makes the code messier to read, and in
most cases doesn't add significant value.
Note: I left the Scheduler logging because it logs interactions
with some awkward library components outside of ExoPlayer, so is
perhaps a bit more justified.
* This is a bit unfair since realistically we wouldn't ever add
lots of logging into trivial classes. But I think it is fair
to say that the deltas would be non-negligible.
PiperOrigin-RevId: 246181421
- Removed DownloadInternal and its sometimes-out-of-sync
duplicate state
- Fixed downloads being in STOPPED rather than QUEUED state
when the manager is paused
- Fixed setMaxParallelDownloads to start/stop downloads if
necessary when the value changes
- Fixed isWaitingForRequirements
PiperOrigin-RevId: 246164845
They behave identically, and the old names are being removed.
Open-source note: The new methods are available in Truth as of version 0.44.
END_PUBLIC
More information:
go/issameas-lsc
Tested:
TAP --sample ran all affected tests and none failed
http://test/OCL:246024032:BASE:246042619:1556672975894:513e7746
PiperOrigin-RevId: 246101315
Can happen if the load position falls behind in every playlist and
when we try to load the next segment, the adaptive selection logic
decides to change variant.
Issue:#5816
PiperOrigin-RevId: 245923006
This resolves some naming confusion that previously existed
as a result of DownloadThread also being used for removals.
Some related variables (e.g. activeDownloadCount) would refer
to both download and removal tasks, whilst others
(e.g. maxParallelDownloads) would refer only to downloads.
This change renames those that refer to both to use "task"
terminology.
This change also includes minor test edits.
PiperOrigin-RevId: 245913671
[Problem]
There are 3 services / modes transported on line 21:
- Captioning
- TEXT (generally not program related)
- XDS (eXtended Data Services)
Bytes belonging to the unsupported modes are interleaved with the
bytes of the captioning mode.
See Chapter 7, Chapter 8.5 and Chapter 8.6 of the CEA608 Standard for
more details.
[Solution]
Drop all bytes belonging to unsupported modes.
[Test]
- All streams containing only captioning services should not be influenced
- Test all 4 CEA 608 channels with live over-the-air content and
using all available TEXT and XDS streams.
There are no logic changes here. It's just moving code around and removing
the "internal" part of names where no longer required.
PiperOrigin-RevId: 245407238
We currently toggle the view in onTouchEvent ACTION_DOWN which is non-standard
and causes problems when used in a ViewGroup intercepting touch events.
Switch to standard Android click handling instead which is also what most
other player apps are doing.
Issue:#5784
PiperOrigin-RevId: 245219728
The AndroidX bundled version (0.42) lags behind the most up-to-date public
release (0.44) making it more difficult to stay close to the actual head
revision which is used internally.
PiperOrigin-RevId: 244848568
This ensures we keep the loading period in sync with the the playing period in
PlybackInfo, when the latter changes to something new.
PiperOrigin-RevId: 244838123
Also re-enable two of them, although note that the fix here is
not related to the flakiness that caused them to be disabled.
I'm re-enabling them since much has changed in DownloadManager,
and the hope is that these tests are no longer flaky.
PiperOrigin-RevId: 244826225
Experiments show this is beneficial for rebuffers with only minor impact
on battery usage.
Configurations which explicitly set a minimum buffer duration are unaffected.
Issue:#2083
PiperOrigin-RevId: 244823642
Before this change we'd release the audio track and create a new one as soon
as audio processors had drained when reconfiguring.
Fix this behavior by stop()ing the AudioTrack to play out all written data.
Issue: #2446
PiperOrigin-RevId: 244812402
- We had buildAddRequest and sendNewDownload. Converged to
buildAddDownload and sendAddDownload.
- Also fixed a few more inconsistencies, and brought the
action constants into line as well.
PiperOrigin-RevId: 244274041
- Listener based reporting of progress allows the content length
to be persisted into the download index (and notified via a
download state change) as soon as it's available.
- Moved contentLength back into Download proper. It should only
ever change once, so I'm not sure it belongs in the mutable part
of Download.
- Made a DownloadProgress class, for naming sanity.
PiperOrigin-RevId: 244242487
1. customCacheKey for DASH/HLS/SS is now asserted against
in DownloadRequest
2. Merging of event delivery in DownloadManager is very
tricky to get right and probably not a good idea
PiperOrigin-RevId: 244048392
Currently SimpleCache will touch cache spans whenever it reads
from them. With legacy SimpleCache setups this involves a potentially
expensive file rename. With new SimpleCache setups it involves
a more efficient but still non-free database write.
For offline use cases, and more generally any use case where the
eviction policy doesn't use last access timestamps, touching is
not useful. This change allows the evictor to specify whether it
needs cache spans to be touched or not. SimpleCache will only touch
spans if the evictor requires it.
Note: There is a potential change in behavior in cases where a
cache uses an evictor that doesn't need cache spans to be touched,
but then later switches to an evictor that does. The new evictor
may temporarily make sub-optimal eviction decisions as a result.
I think this is a very fair trade-off, since this scenario is
unlikely to occur much, if at all, in practice, and even if it
does occur the result isn't that bad.
PiperOrigin-RevId: 244005682
One goal we forgot about a little bit was to allow applications
to provide their own index implementation. This requires the
writable side to also be defined by an interface.
PiperOrigin-RevId: 243979660
ImaAdsLoader gets the player position after the app releases
the player to support resuming ads at their current position
if the same ads loader is reused.
PiperOrigin-RevId: 243969916
ShadowLooper -> ShadowLegacyLooper
ShadowRealisticLooper -> ShadowPausedLooper
ShadowBaseLooper -> ShadowLooper
And all public methods from ShadowLegacyLooper get pushed up to ShadowLooper
Pull Request: https://github.com/robolectric/robolectric/pull/4868
Copybara: OK
Also adjust Google3 tests using custom looper shadows where necessary.
Convert exoplayer to paused looper to eliminate reliance on custom shadows
PiperOrigin-RevId: 243839311
The removed condition only applies when prepare fails and no timeline was or
is known. We should keep a pending seek position in such a case. The internal
player does the same thing already.
PiperOrigin-RevId: 243819466
- Expose constructors that take DatabaseProvider. Deprecate those
that do not.
- Expose Cache.getUid. This will likely be used for naming of the
tables accessed by DefaultDownloadIndex .
PiperOrigin-RevId: 243637786
- Allows enforcing immutability, which in a future CL will allow
avoiding allocating a new array/list on every call.
- Also some left over doc cleanup from the DownloadState rename.
PiperOrigin-RevId: 243627352
The old domain automatically forwards to the new one. For consistency, change
all doc and code references regardless.
Also adds GitHub CNAME config file which configures our page for the custom
domain.
PiperOrigin-RevId: 243592110
handleSourceInfoRefreshed checks for various conditions which may trigger a
change in position. In all cases, we need to resolve the new position for ads,
and if the corresponding MediaPeriods already exist, perform the seek to the new
position.
This change simplified the code by
1. Moving all conditions in a single if-else structure which just determines
the new playback position. This makes it easier to read and to follow.
2. Doing the subsequent seek and position update in one final step to remove
duplicated code.
As a side effect, it also improves some edge cases. For example when skipping
an ad to an already prebuffered period, we now properly update the existing
prebuffered period.
PiperOrigin-RevId: 243588014
- Make a best effort to avoid posting MSG_DOWNLOAD_THREAD_STOPPED
if the internal thread has already quit. Doing so is harmless,
but causes an error in Logcat. We used to generate this warning
quite a bit in ExoPlayerImplInternal as well, and we got quite
a few issues filed about it, so best to avoid it if possible.
- Null out the back reference DownloadThread holds to its manager
on release. This avoids a potential issue where a download thread
can prevent GC of its manager if it doesn't cancel quickly.
There's similar logic (with a similar comment) in Loader.LoadTask.
PiperOrigin-RevId: 243365143
- Rename getAllDownloads to getCurrentDownloads to make it clear
that it doesn't include completed and failed downloads
- Change getDownloadCount to isWaitingForRequirements, which is
what it's used for. Added TODO to make it returns the right thing
PiperOrigin-RevId: 243257856
If the returned retry delay is unset, we should use a DONT_RETRY_FATAL action
instead and dispatch the event with the "canceled" flag.
PiperOrigin-RevId: 243251554
Non-trivial download state transitions are currently split across
DownloadManager and Download. These transitions are part of the
same state machine, so it's clearer if they're all in the same place
(i.e. DownloadManager, since this is the component that transitions
downloads between states).
PiperOrigin-RevId: 243249915
The only state DownloadInternal holds is duplicate of state contained
in Download, but can confusingly be temporarily out of sync. This is
error prone because it's easy to use the wrong variable (e.g.
download.state vs state). DownloadInternals methods are called into
and call out into DownloadManager, which makes some code paths that
are quite hard to follow.
It's possible to simplify DownloadManager quite a lot by removing the
duplicated state in DownloadInternal, at which point DownloadInternal's
methods flatten into DownloadManager, which can just hold an internal
list of Downloads directly.
This is a first step, which makes it clear that DownloadThready only
needs its immutable DownloadAction + an isRemove flag.
PiperOrigin-RevId: 243245288
Put methods into a more sensible order (the same order as
in the switch statement, which is a more natural order with
e.g. initialize coming first and release coming last).
PiperOrigin-RevId: 242891742
- Changed startDownloads/stopDownloads back to their previous behavior
of starting and stopping all downloads at the manager level.
- Made setManualStopReason methods for the new case of setting a manual
stop reason or some or all downloads.
- Added plumbing to specify an initial manual stop reason when adding a
new download, without also overwriting the manual stop reasons of all
other preexisting downloads. Using the value is left as a TODO pending
a bit of further cleanup that'll make it easier.
PiperOrigin-RevId: 242891688
- Remove completed downloads from progress notification.
- Treat restarting as a downloading, When there are both
remove and download tasks ongoing, we prefer to show a
download notification to a remove one. A restarting task
encapsulates is basically a (remove+download) task. Given
our preference, we should treat it as a download rather
than as a removal.
PiperOrigin-RevId: 242867228
Both manifest loads currently use the default retry delay although a
LoadErrorHandlingPolicy is provided to the MediaSource.
PiperOrigin-RevId: 242852672
- Remove NETWORK_TYPE_NOT_ROAMING and NETWORK_TYPE_METERED
because JobScheduler doesn't support them, and they're
probably not useful to many people (data when roaming is
normally enabled/disabled at the OS level, and restricting
to *only* metered networks seems niche)
- Convert network requirements proper flags
- Stop persisting requirements in DownloadIndex. The direction
we're headed to solve the manager start/stop problem is
going to involve state in DownloadManager determining whether
downloads actually start, and if we're doing that then it's
no worse to do it for this as well
PiperOrigin-RevId: 242713196
Robolectric calls messages posted to the main thread immediately inline. This
will change in the upcoming release and will break tests implicitly relying
on that behavior.
Update ConcatenatingMediaSourceTest to actually wait for the posted message.
PiperOrigin-RevId: 242631531
HashMap.values does not guarantee a stable order, but our tests
assert that the order is stable. It's probably a nice property
that the order is the same as that in which downloads are added,
so this change makes the order stable, with that order.
A future change will likely improve the way this works, by
changing the internal thread "downloads" variable to have type
ArrayList<Download>, at which point the internal thread can just
pass a read-only copy of its list to the main thread whenever a
state changes.
PiperOrigin-RevId: 242460725
- Fix ID being dropped when DownloadAction is serialized and
de-serialized as it's passed to DownloadService
- Properly set DownloadAction.id when building an action from
a DownloadState
- Make ID a required constructor argument. Else it's too easy
to not propagate it by accident.
PiperOrigin-RevId: 242457831
Remove MediaCodecSelector.DEFAULT_WITH_FALLBACK, as codec selectors
will need to be able to return a list of decoder infos even when not
using fallback in a later change. Instead signal that fallback should
be used via a renderer constructor.
Fallback is always disabled for audio.
PiperOrigin-RevId: 242454172
Adding a protected method for that allows to supply a customized
TrackOutputProvider to the ExtractorWrapper used by the ContainerMediaChunk
(e.g. for logging purposes).
The alternative would be to provide a TrackOutputProvider through the
ChunkSampleStream constructor, but the extra initialization taking place
in the ChunkSampleStream constructor would need to move somewhere else and
some methods of BaseMediaChunkOutput would need to move to the
TrackOutputProvider interface. This seems too much effort for niche
customization case.
PiperOrigin-RevId: 242448776
The position should be subtracted from the total content length
retrieved from the cache in this case, both for iteration and for
filling out counters.contentLength (for the latter, note not
doing it this way is inconsistent with what happens when dataSpec
length is set to a known value).
PiperOrigin-RevId: 242445034
It's a transient state whose only use is when passing a removed
download to onDownloadStateChanged. It's a bit strange to have it
as a proper state, since we end up asserting that it's an invalid
value in other places.
This change adds an explicit onDownloadRemoved, which allows
removal of the transient STATE_REMOVED, related assertions, and
uncertainty when dealing with an @State variable whether it's
necessary to handle it being STATE_REMOVED.
PiperOrigin-RevId: 242444128
This is the last cl of a series of cls that will convert DownloadManager
threading model as public methods post actions on an internal thread
which then do the work.
PiperOrigin-RevId: 242437229
The priority task manager only needs to listen to loading state changes and
is independent of the rest of DefaultLoadControl. This also fixes problems
where the player stops loading without consultin the LoadControl.
PiperOrigin-RevId: 242098374
This is the second cl of a series of cls that will convert DownloadManager
threading model as public methods post actions on an internal thread
which then do the work.
PiperOrigin-RevId: 241773765
Necessary for implementing scheme-independant resource management.
Example: A media source needs to have ownership of a crypto resource
while samples are in buffer (but not yet in the renderer).
PiperOrigin-RevId: 241698575
Most of our components that have Handler instances for calling
back to application code instantiate the Handler using Util.getLooper
in the constructor. This makes the two components that do
something else consistent with that model.
PiperOrigin-RevId: 241545575
If no track matches the preferred language or no preferred language is provided,
use the system Locale language as the next decision criterion.
PiperOrigin-RevId: 241322703
- This removes the need for Variant and Rendition to have a common
base class, allowing the url field to be marked as @Nullable in
Rendition but not in Variant.
- The addition of mediaPlaylistUrls is needed for the new StreamKey
indexing for HLS. It's also convenient in a couple of places (e.g.
HlsDownloader), where a list of all media playlist URLs is needed.
- Lots of places where HlsUrl was passed only needed the actual
URL (not the Format, which is the other piece of HlsUrl). Passing
just the URL is a little simpler, and resolves some of the naming
confusion.
Issue: #5596
Issue: #2600
PiperOrigin-RevId: 240970466
This is to make it possible to use equality of HlsUrl.url fields
to determine whether two HlsUrls point at the same media playlist.
This doesn't work currently because it's possible to mix absolute
and relative urls, which will not be equal until after the relative
url is resolved against the playlist baseUrl.
Issue: #5596
Issue: #2600
PiperOrigin-RevId: 240966503
Also make combination of language and role flags the default over the label,
as it's more readable and auto-translated into other languages.
PiperOrigin-RevId: 240801070
Custom factories currently need to copy most of the code in the
AdaptiveTrackSelection.Factory to make use of the same functionality.
Simplify this by allowing to overwrite the factory.
PiperOrigin-RevId: 240773271
This is the first of a series of cls that will convert DownloadManager
threading model as public methods post actions on an internal thread
which then do the work.
PiperOrigin-RevId: 240743400
Still skipping any renditions that have a null URL, which means that
closedCaptions in particular is always empty. This restriction will
be removed in a subsequent change, which will also remove muxedAudioFormat
and muxedAudioCaptions from HlsMasterPlaylist and instead derive them
from the Variant and Rendition information in HlsMediaPeriod.
Issue: #5596
Issue: #2600
PiperOrigin-RevId: 240623500
The one functional change here is to require subclasses to implement getForegroundNotification. It seems easier and less error prone to
force developers to implement it than it does to document the cases
in which they need to override it (which is most cases).
PiperOrigin-RevId: 240566737
Issue: #5596
This arguably made a worse problem than it solved, and also I think subtly broken HLS
downloads by changing which renditions HlsMasterPlaylist.copy would retain in some
cases. Reverting as a mini step toward removing smart logic from the HLS playlist parser.
*** Original commit ***
Expand check for muxed audio media tags to include uris that match variants
Issue:#5313
***
PiperOrigin-RevId: 240348969
If enabled, DefaultTrackSelector returns multiple groups with more than one
track. AdaptiveTrackSelection then decides on the order in which the tracks
are changed such that the BandwidthProvider for each selection can figure out
the allocated bandwidth.
PiperOrigin-RevId: 240150206
It's currently very difficult to actually set a reason for track selection
triggered by a SelectionOverride. It would require creating a new custom
TrackSelection.Factory where the reason gets injected somehow before the
override is specified on the player.
Simplify this whole procedure by allowing to set the reason directly and
forward this reason to all fixed selections created based on this override.
PiperOrigin-RevId: 240114942
3 ("11") is the reserved code for fscod in AC3. The spec says that "If the
reserved code is indicated, the decoder should not attempt to decode audio and
should mute."
We currently throw an exception as we try to access an array with an invalid
index. Now ignoring the track instead by invalidating the format.
Issue:#5638
PiperOrigin-RevId: 240106255
This allows to distinguish between regional variants and scripts.
We still need to normalize the language code itself to make track selection
independent of the whether 2 or 3 letter codes are used.
PiperOrigin-RevId: 239783115
Any seek map with non-zero offsets breaks playback with ICY metadata as
the metadata is no longer read from the correct position.
Issue:#5658
PiperOrigin-RevId: 239605839
*** Reason for rollback ***
Trying to forward fix instead.
*** Original change description ***
Automated g4 rollback of changelist 237051112.
*** Original change description ***
Add SimpleCache deletion functionality
This is needed now that index data may be stored outside
of the cache directory.
***
***
PiperOrigin-RevId: 239429430
*** Original change description ***
Add SimpleCache deletion functionality
This is needed now that index data may be stored outside
of the cache directory.
***
PiperOrigin-RevId: 239294713
When an error occurs we call stopInternal, and this clears the MediaPeriodQueue,
which in turn releases media period holders and notifies that media periods have
been released. AnalyticsCollector updates its information about media periods
using the media period release events, which means that if we post the source
error after stopInternal posts its events we can't determine what media period
the source error corresponds to.
Move error notifications before calling stopInternal, so that
AnalyticsCollector's model of the media period queue contains the loading period
at the point when it handles the error.
For consistency also move the other (non-source) error notifications to match
the new ordering.
PiperOrigin-RevId: 238559324
This simplifies the DownloadHelper code in the demo app and is generally
useful for more specific updates with SelectionOverrides.
PiperOrigin-RevId: 238228276
This replaces the deprecated usages of RobolectricTestRunner and
RuntimeEnvironent and fully migrates the tests to androidx.
PiperOrigin-RevId: 238011667
We may currently throw if the load completes before we finished preparation.
Don't throw and instead check for this condition in maybeThrowPrepareError.
PiperOrigin-RevId: 237237000
These are thrown for non-IOException encountered during loading. Also, they
are thrown from an unexpected position and retrying is likely to fail anyway
because the Extractor is left in an unrecoverable state.
PiperOrigin-RevId: 237043948
SQLiteException is a runtime exception, which makes it easy to
forget to handle it. This change converts SQLiteExceptions into
a checked exception, which is then handled appropriately.
PiperOrigin-RevId: 237038793
Currently a flags-only DecoderInputBuffer may hold only the end-of-stream
flag. This change makes flags-only buffer read any kind of flag set in
the next sample. If no sample is available RESULT_NOTHING_READ is
returned.
PiperOrigin-RevId: 237027581
nalPrefix.readUnsignedIntToInt() will throw if the unsigned output doesn't fit
in an int. Before this change, in the error case we'd retry reading from after
the NAL prefix position. Throw a ParserException so that reading an obviously
invalid NAL prefix will be treated as a fatal exception by the default load
error handling policy.
PiperOrigin-RevId: 236839690
There are 6 different situations which are now more explicitly covered to
ensure we handle them correctly:
1. Radio button (non-adaptive, single group only)
Selected -> Do nothing.
Unselected -> Replace override with selected track.
2. Check box (non-adaptive, but multi-group allowed)
Selected -> Remove track (and override). If last one, set isDisabled flag.
Unselected -> Replace override with selected track.
3. Check box (adaptive allowed, single or multi group)
Selected -> Remove track. If last, remove override and maybe set isDisabled.
Unselected -> Add track to override.
PiperOrigin-RevId: 236668642
The release needs to post to the MediaSource thread and also needs to post
back to the DownloadHelper thread to prevent sending updates after release has
been called. The point where we release the downloadHelper also needs to
dismiss the dialog in case the creation has already been queued before the
release.
PiperOrigin-RevId: 236652309
This is more in line with "forgetting all previous state" as documented for
resetState=True. Also only apply the current position as initial seek position
in this case.
PiperOrigin-RevId: 236623630
We currently throw if a pending seek position was valid when the user issued
it on the app thread, but can't be resolved on the playback thread because the
timeline changed in the meantime. Throwing in this case seems wrong as the
user could not have known about the issue (and the seek position was actually
valid). Also, in other cases where the currently playing period is no longer
in the new timeline, we gracefully use a subsequent period or transition to
ENDED state instead of throwing. So it seems more consistent to transition to
ENDED state as well.
PiperOrigin-RevId: 236274862
Instead just set the currently clicked item as override. If the already
selected button is clicked, the override is reset with the same value.
PiperOrigin-RevId: 236118429
We currently do not show check boxes if the renderer does not support adaptive
switches between tracks in one group. However, we assume check boxes in the
onClick method.
Use same logic for both methods to be consistent.
PiperOrigin-RevId: 236118372
The flag in ExoPlayer.prepare is documented as keeping the current window
index and window position. We are currently using the current period UID and
period position instead. This causes problems when the media source is changed
but the position is not reset.
Using the initial seek position instead ensures we actually use the window
index and position.
Issue:#5520
PiperOrigin-RevId: 236101024
Adding new error types may cause issues when listeners assume a fixed set of
error types and don't handle arbitrary defaults.
Fixing error handling in one case and improving documentation to make people
aware of the issue.
PiperOrigin-RevId: 236093265
While disabled the renderer does not have non-null stream formats. This means
that setting the operating rate could cause a NullPointerException if there was
a codec for reuse.
Check for being enabled/started before trying to set the operating rate. After
the renderer is enabled it should receive a new input format which will update
the operating rate as needed.
PiperOrigin-RevId: 235494384
If the DefaultAudioSink was reconfigured in a way that was compatible with the
previous configuration just after having been reset, we would try to drain audio
processors despite not having an AudioTrack. This could result in a
NullPointerException if speed adjustment was active.
Fix this behavior by only trying to drain audio processors if we actually have
an AudioTrack.
PiperOrigin-RevId: 235355466
- Expose constructor (package private for now, for tests only)
- Add some tests for cache initialization
- Add some TODOs for handling initialization failure
PiperOrigin-RevId: 235188386
*** Reason for rollback ***
Breaks ExoPlayer's gradle build
*** Original change description ***
Migrate Mockito Matchers.{hamcrestMethods} to MockitoHamcrest.{hamcrestMethods}
All methods accepting a hamcrest Matcher in org.mockito.Matchers have been changed
to only accept an ArgumentMatcher. The corresponding methods are now available on
MockitoHamcrest.
For more information see http://go/mockito-2-lsc
Tested:
TAP --sample for global presubmit queue
http://test/OCL:235033293:BASE:234998256:1550793421835:c2ccbbda
***
PiperOrigin-RevId: 235186705
All methods accepting a hamcrest Matcher in org.mockito.Matchers have been changed
to only accept an ArgumentMatcher. The corresponding methods are now available on
MockitoHamcrest.
For more information see http://go/mockito-2-lsc
Tested:
TAP --sample for global presubmit queue
http://test/OCL:235033293:BASE:234998256:1550793421835:c2ccbbda
PiperOrigin-RevId: 235153912
*** Reason for rollback ***
Reverting as this may break playback on other Amlogic devices and/or playback of non-interlaced content.
*** Original change description ***
Add max video size workaround for Amlogic decoder.
The Amlogic awesome decoder reduces the video size of interlaced videos by half
if the internal configuration isn't force reset with new maximum input size
values. The product of these new values must exceed 1920x1088 to force the
reset.
Issue:#5003
***
PiperOrigin-RevId: 234967314
Currently IMA determines that the overlay is obstructing, even
if it's empty. Register it as friendly, which means we're
assuming that anything the apps puts in it is necessary for
playback.
PiperOrigin-RevId: 234963065
HlsSampleStream#read should return end of stream when
there is no mapping for the sample stream, instead of
nothing read. This allows the player to transition to
ended.
Issue:#5524
PiperOrigin-RevId: 234764027
- Use Cache UID for CacheContentIndex and CacheFileMetadataIndex. This
enables SD card swapping for a single device.
- I'm hopeful of finding a way to get the Cache UID to DefaultDownloadIndex
so we can do the same there.
PiperOrigin-RevId: 234662753
Horizontal orientation doesn't make sense. I thought about
overriding the setter to throw something, but it's probably
not worth the extra lines.
PiperOrigin-RevId: 234632530
This bug affects any playlist that uses initialization segments. In practice,
almost exclusively fragmented mp4 segmented playlists are affected.
The bottom line is that extractors are chosen for reuse after the
initialization segment connection is open. However, reused extractors
do not need re-parsing the init segment, so loading the initialization is
wasteful.
PiperOrigin-RevId: 234479467
TrackSelectionView requires an initialization with a call to init(...).
That's why we shouldn't let the view retain its view hierarchy automatically
as the views won't be backed by data if restored. Instead add a listener
which lets the containing activity/fragment save and restore the state if
needed.
PiperOrigin-RevId: 234152491
This is a temporary fix to prevent NullPointerException exceptions.
Though writing to cache will still fail if the cache folder isn't a real
folder.
There are a few thing we can try:
* The listing might be failing because the cache folder is just created.
We can wait and try again.
* If the cache folder is a regular file, we can try deleting and creating
a folder with the same name.
PiperOrigin-RevId: 234121925
Previously we would get a new AudioTrack and flush all audio processors if any
AudioProcessor needed to be flushed on reconfiguration. This was problematic for
the case of TrimmingAudioProcessor because it could become active or inactive
due to transitioning to a period with gapless metadata or without it (we don't
keep it active all the time because it is wasteful to populate its end buffer
for content that is not gapless).
This change handles the case where we don't need an AudioTrack but
AudioProcessors do need to be flushed. In this case we drain all the audio
processors when next handling data then switch to the new configuration.
This avoids truncation when period transitions change whether
TrimmingAudioProcessor is active but don't require a new AudioTrack, and is also
a step towards draining the AudioTrack when transitioning between periods if we
do need a new AudioTrack.
To do this, it needs to be possible to drain any pending output data from an
AudioProcessor after it's configured to a new format, so this change makes sure
AudioProcessors allow calling playToEndOfStream and getOutput after
reconfiguration and before flush.
PiperOrigin-RevId: 234033552
This cleanup is in preparation for draining audio processors on reconfiguration
to a format that doesn't require a new AudioTrack to be created.
PiperOrigin-RevId: 233990983
Stop encoding/decoding presentation time as part of the message.
What's actually in emsg boxes is a presentation time delta,
which is why it's only 32 bits, and hence why it doesn't handle
large absolute timestamps. We were using this field to hold
absolute timestamps only for the purpose of passing presentation
times from DashManifestParser.parseEvent back to the calling
method. After this change, we return Pair<Long, EventMessage>
instead.
Issue: #5490
PiperOrigin-RevId: 233561731
builder.mActions is marked as @RestrictTo(LIBRARY_GROUP). We'll
just have to put up with notification flicker on KitKat if the
actions change.
PiperOrigin-RevId: 233420076
Switch from passing an ad UI ViewGroup to passing an object that can also
provide information about controls overlays.
Also switch to using a dedicated overlay for ads instead of the overlay frame
layout, which apps have easy access to.
PiperOrigin-RevId: 233393500
Supporting multiple overrides allows to select tracks from multiple groups, if
enabled. As more options are added, the creation of the dialog is moved to a
separate builder class.
PiperOrigin-RevId: 233366282
Imported from GitHub PR https://github.com/google/ExoPlayer/pull/5438
Plus the following changes:
- Only support profile 5 (handling other profiles requires
backward-compatibility changes in the renderer which are left for a later
change.)
- Only add KEY_PROFILE to the codec configuration MediaFormat for Dolby Vision.
- In MediaCodecUtil support all DV profiles that Android has constants for. This
includes ones that are "not supported for new applications". Since we don't
extract these profiles, this is currently only for the benefit of custom
extractors.
- Misc code style fixes and reordering for consistency.
Merge 37878b975c2bc082b0568e21cbe62bfcef97c10d into 67be9e7783
PiperOrigin-RevId: 233066799
Given the change to require setPlayer on AdsLoaders, it seems like a good
opportunity to clean up deprecated ads-related symbols.
PiperOrigin-RevId: 233020171
When SimpleCache uses a CacheFileMetadataIndex, it will be able to avoid
querying file.length() and renaming files, both of which are expensive
operations on some file systems.
PiperOrigin-RevId: 232664255
Now we're reusing the builder, it's necessary to set maxProgress
back to 0 to avoid the progress bar appearing for end state
notifications.
PiperOrigin-RevId: 232520007
DefaultDownloadIndex is currently just forwarding all calls to its
inner class. getDownloadTable() handles initialization, but this
doesn't really seem different to having an initialization method. It
doesn't guarantee initialization happens, since a bad method
implementation could try and access downloadTable directly, just as
a bad method implementation could forget to call the initialization
method. Hence this change removes the indirection.
PiperOrigin-RevId: 232482228
This combines all the different listeners in ExoVideosPlayerV2 into one and
moves the PlaybackLogger class towards ExoPlayer's AnalyticsCollector with
the same purpose.
In the future this allows two things:
1. Gradually move LogginClient implementations to AnalyticsListener to
prevent custom event forwarding.
2. Using ExoPlayer's QoE extension (which is also an AnalyticsListener).
PiperOrigin-RevId: 232321182
When calling releaseSource(), all pending messages will be removed. That means
that all action-on-completion callbacks which are somewhere in flight are
just dropped without being called. This change adds code to keep track of the
current state of each callback to allow all of them being called when the
source is released.
Issue:#5464
PiperOrigin-RevId: 232312528
This change enables transitioning to/from different Storage
implementations, to allow experimentally enabling (and if
necessary, disabling) SQLiteStorage. All that's left to do
is the final wiring to turn it on
PiperOrigin-RevId: 232304458
If there is data after the last samples in the container, we may request
continue loading after the last samples have been read but before the load has
completed. In this situation the buffered position is returned as
Long.MAX_VALUE, which prevents continuing loading, yet the media period is not
treated as fully buffered because its buffered position is not
C.TIME_END_OF_SOURCE.
PiperOrigin-RevId: 231406964
We can keep the reading media period and continue playing if we haven't read
beyond the new duration. Otherwise, we can keep the period, but need to reset
the renderers as we already read too far.
PiperOrigin-RevId: 231406252
It better describes what the class does. More importantly, we've had
inconsistent class names since we added offline support, for which we
added ProgressiveDownloader ("ExtractorDownloader" doesn't make any
sense). We could really do with aligning the names for clarity.
(Sorry)
PiperOrigin-RevId: 231387268
This requires to prepare the media source and the periods in a small helper similar
to the metadata retriever. It also gets rid of the need to have abstract protected
methods to load the manifest, to extract the track groups and to convert to stream keys,
as this can now be handled by the media period.
PiperOrigin-RevId: 231385590
Currently, we remove all variants if none of the stream keys contains any
variants. This causes HlsMediaPeriod to throw exceptions as it expects at least
one variant.
Change it to support master playlists without variants.
PiperOrigin-RevId: 231385547
Converting a single track selection to stream keys is only possible if the output
is independent from other track selections being made.
This is not the case for DASH and HLS embedded track groups which should select the
already selected primary track if possible (and thus needs to know whether a primary
track group is selected).
Also, update the test method to take a period index.
PiperOrigin-RevId: 231385490
The way it is currently, it's very unclear that an operation on the
version table will correctly belong to a transaction in code such as
this, taken from DefaultDownloadIndex:
writableDatabase.beginTransaction();
try {
writableDatabase.execSQL(...);
versionTable.setVersion(...);
writableDatabase.setTransactionSuccessful();
} finally {
writableDatabase.endTransaction();
}
This change explicitly passes the database, to make it obvious that
the operation will really go into the same transaction:
writableDatabase.beginTransaction();
try {
writableDatabase.execSQL(....);
VersionTable.setVersion(writableDatabase, ...);
writableDatabase.setTransactionSuccessful();
} finally {
writableDatabase.endTransaction();
}
PiperOrigin-RevId: 231374933
Float output is only possible from API 21, but the high-res int
to float conversion path was checking for 32-bit PCM not float
output capability.
PiperOrigin-RevId: 231172495
This will allow CachedContentIndex to start using database
storage without us having to change the SimpleCache and
CachedContentIndex constructors to require a Context or a
DatabaseProvider.
PiperOrigin-RevId: 230884501
If are allowing changing durations of periods, we shouldn't use the end position
of clipped content as part of the id as it may change. This change moves the end
position back to MediaPeriodInfo and adds the next ad group index to the id
instead to ensure we still have unique ids for all content parts.
PiperOrigin-RevId: 230878389
The combination of pre-16 API levels accounting for ~0.5% of the device
population, and that the most important components in ExoPlayer (e.g.
the MediaCodec renderers) have always required API level 16, mean it's
very unlikely this will negatively impact on anyone.
PiperOrigin-RevId: 230701808
We need to support serialization to/from an SQLite table. The
model of passing something around for each class to write into
doesn't work well for SQL, and it would be messy to have two
different structural designs for serialization. This change
centralizes the logic in CachedContentIndex, where a centralized
SQL based version can more easily sit alongside it.
PiperOrigin-RevId: 230692291
This method is a generalization of the existing hasReadStreamToEnd. It is
useful to determine whether a renderer already read beyond a new duration of
a period.
PiperOrigin-RevId: 230689165
1. The method kept track of the current period index to check if the next
period is still in the correct period. This is unneccessary since we no longer
use the period index but the actual uid in MediaPeriodId and mismatches are
already detected by canKeepMediaPeriodHolder.
2. We updated the MediaPeriodIndfo twice: once in getFollowingMediaPeriodInfo
and once in getUpdatedMediaPeriodInfo. That's confusing and difficult to
follow. The only difference is that getUpdatedMediaPeriodInfo keeps the
content position while getFollowingMediaPeriodInfo resets it. This is made more
explicit for readability.
3. The durations compatibility check for all following periods was broken as
it compared the same durations (partly due to the confusion caused by 2.)
PiperOrigin-RevId: 230519295
* Add AC-4 MIME type definition
* Add AC-4 format support in Mp4Extractor and TsExtractor
* Add AC-4 Extractor
* Add AC-4 playback support in MPEG-4, MPEG-DASH, TS and HLS
ExoPlaybackExceptions of type SOURCE are always associated with the loading
period and thus we can use the event time for the loading period in
onPlayerError. Renderer and unexpected exceptions are still associated with the
currently playing period.
Issue:#5407
PiperOrigin-RevId: 230216253
The Amlogic awesome decoder reduces the video size of interlaced videos by half
if the internal configuration isn't force reset with new maximum input size
values. The product of these new values must exceed 1920x1088 to force the
reset.
Issue:#5003
PiperOrigin-RevId: 230206675
That's the same position set in MediaPeriod.prepare (where it may be removed
in the future).
Having the position at an earlier point is necessary to fix an
issue with lazy preparation in ConcatenatingMediaSource where the prepare
position was assumed to be known but MediaPeriod.prepare hasn't been called
yet.
Issue:#5350
PiperOrigin-RevId: 229756637
[Problem]
CC1 is shown even when CC2-3-4 is selected
[Solution]
* use incoming channel and frame information
* Misc Codes need to handle use Frame information
* Add checks everywhere
[Test]
* Live channels and already existing test should not show any difference
in behavior when CC1 is selected.
* Live channels might have CC2-CC3-CC4
* Sarnoff test content has specific test cases for channel support
When the extra adaptation set of a switch group isn't defined in the manifest, we
currently assume it's the first adaptation group. This either leads to wrong grouping
or duplicate track groups.
Such a case may easily happen if the manifest is filtered such that only one of the
switch adaptation sets will be present in the manifest.
PiperOrigin-RevId: 229365379
The buffered position is currently based on the mimimum queued timestamp of
all AV tracks. If the tracks have unequal lengths, one track continues loading
without bounds as the "buffered position" will always stay at the shorter
track's duration.
This change adds an optional buffer flag to mark the last sample of the
stream. This is set in the Mp4Extractor only so far. ExtractorMediaSource
uses this flag to ignore AV streams in the buffered duration calculation if
they already finished loading.
Issue:#3670
PiperOrigin-RevId: 229359899
That was previously handled by the player. But since we switched to Handler
messages instead of player messages, we should do that manually.
PiperOrigin-RevId: 229341747
This is not necessary as the track selection needs to be updated with
updateSelectedTrack anyway. It's also error-prone as the selection code
calls into a protected method of a not fully initialized class.
PiperOrigin-RevId: 229331669
DataSpec.FLAG_ALLOW_CACHE_FRAGMENTATION is added to indicate to the
cache when fragmentation is allowed. This flag is set for progressive
requests only.
To avoid breaking changes, CacheDataSink defaults to ignoring the flag
(and enabling fragmentation) for now. Respecting the flag can be
enabled manually. DownloaderConstructorHelper enables respecting of
the flag.
Issue: #4253
PiperOrigin-RevId: 229176835
We currently forget whether a source is seekable at re-preparation. This was
implemented intentionally this way under the assumption that we really can't seek
until we have loaded the seek map again. However, seek operations are only
allowed after a media period is prepared. So there is no harm in remembering
whether a source is seekable.
This problem currently prevents reusing ClippingMediaSources with
ExtractorMediaSource and a non-zero start clip position.
Issue: #5351
PiperOrigin-RevId: 229169441
ExoMediaCrypto.requiresSecureDecoderComponent() is removed, and
FrameworkMediaCrypto.forceAllowInsecureDecoderComponents is made
public to allow determining whether a secure decoder is required
to be implemented in MediaCodecRenderer.
PiperOrigin-RevId: 228909771
There were some edge cases in which we'd forget to release DRM
sessions. For example if we read a format and acquired a
pendingDrmSession (in onInputFormatChanged), then immediately
read another format and overwrote pendingDrmSession, we'd
forget to release the one that's been overwritten.
This change hopefully makes release much clearer. We keep a list
of all drm sessions we're currently holding. Whenever we update
either drmSession or pendingDrmSession, we release any other
sessions that are in the list.
PiperOrigin-RevId: 228905465
The window object is used without being filled with data. This used to work
well for most cases as the same live stream is sending regular updates and the
first update is almost never used if it's not the first item in a playlist.
It causes problems when the first timeline update of a live stream is actually
used for playback (e.g. when the live stream is lazily prepared in a playlist
and played first).
PiperOrigin-RevId: 228530232
Reported in https://github.com/google/ExoPlayer/issues/3860
For failing examples see the github link above.
[Problem]
We drop matching control codes even if they are not received on
consecutive frames.
The specification says
"(4) If the first transmission of a control code pair passes parity,
it is acted upon within one video frame. If the NEXT frame contains
a perfect repeat of the same pair, the redundant code is ignored."
Keyword is the NEXT. The frames must arrive immediately after
each other.
See https://www.law.cornell.edu/cfr/text/47/79.101
[Solution]
Set an additional flag when any data is processed. Control code
duplication checks should be limited only for the first control
byte pairs processed after any control code.
[Test]
Sarnoff tests have equivalent CEA708 and CEA608 Streams.
This is the initialization part of mitigating issue #4253. The
remaining work is on the writing side, and is simply a case of
having startFile return File instances that are sharded into
sub-directories. We still need to decide what scheme we want
to use for doing that.
Issue: #4253
PiperOrigin-RevId: 228306327
Calls to File.length() can be O(N) where N is the number of files
in the containing folder. This is believed to be true for at least
FAT32. Repeated calls for the same file tend to be faster,
presumably due to caching in the file system, however are still
surprisingly expensive. Hence minimizing the number of calls is
preferable.
Issue: #4253
PiperOrigin-RevId: 228179921
They are not longer needed anywhere, are error-prone (because of threading
requirements), and complicate testing and using MediaSources without a player.
PiperOrigin-RevId: 227871157
We currently either use the app thread returned by the player or the thread
the commands are called on depending on whether the media source is already
prepared or not.
This change lets the application decide which callback thread to use. As a
side effect, we also don't longer need access the player instance passed to
MediaSource.prepare.
PiperOrigin-RevId: 227871111
Also configure the FFmpeg context to ignore errors as far as possible (this
appears to have an effect only for certain decoders).
Issue: #5293
PiperOrigin-RevId: 227851397
The top level requirement only tried to ensure that the entire timeline only
has one period. This is already asserted by ImaAdsLoader. AdsMediaSource
itself works fine as long as the wrapped timeline has one period only. This
is now asserted instead.
PiperOrigin-RevId: 227682141
Passing the player through MediaSource.prepare is only needed for the AdsLoader
and complicates other usages of MediaSource. Providing the player directly to
the AdsLoader is also in line with the usage pattern of PlayerView and other
components.
Also rename methods to start/stop to better reflect their usage.
PiperOrigin-RevId: 227682112
Made DownloadState top level class.
Replaced action field DownloadAction fields.
Added removing, removed and restarting states.
Renamed started state to downloading.
PiperOrigin-RevId: 227664735
ExoPlayer methods must not be called from any thread besides the specified
app thread. Therefore we shouldn't use them here. Using a regular Handler
instead is fully equivalent.
Issue:#5240
PiperOrigin-RevId: 227650489
- Increase the default cache file size to 5MB
- Recommended a minimum cache file size of 2MB to discourage
applications from specifying values small enough such that
unreasonably large numbers of cache files are generated
- Allow maxCacheFileSize=C.LENGTH_UNSET, equivalent to setting it
to MAX_VALUE. This is just for API consistency with other APIs
we have that accept LENGTH_UNSET
Issue: #4253
PiperOrigin-RevId: 227524233
CacheEvictor.onStartFile currently receives a length, which is the
maximum size of the content that might be written. The LRU cache
evictor will make sure there's sufficient space for the specified
size. If the actual size of the content is unknown, CacheDataSink
passes maxCacheFileSize.
The current behavior isn't ideal. It seems valid for a developer to
specify maxCacheFileSize=Long.MAX_VALUE if they don't want any
file fragmentation in the cache. However if they then attempt to
cache something with unknown length, LRU cache will try and make
room for content of length Long.MAX_VALUE, and end up evicting the
entire cache to do so.
This change alters the logic so a length is only passed if the
actual size of the content is known. In other cases C.LENGTH_UNSET
is now passed. The LRU evictor will not evict until after the file
is committed. Note a custom LRU evictor could still opt to evict to
ensure some application specified amount of space, if that's the
desired behavior.
PiperOrigin-RevId: 227509525
This also applies when seeking or transitioning to unprepared media, which
isn't clear from the current documentation.
Issue:#5267
PiperOrigin-RevId: 226486685
* Add AC-4 MIME type definition
* Add AC-4 format support in Mp4Extractor and TsExtractor
* Add AC-4 Extractor
* Add AC-4 playback support in MPEG-4, MPEG-DASH, TS and HLS
When a Download is created it's set to queued state but doesn't notify
listeners about this state. DownloadManager checks if it can start the
download. After this checks it notifies the listeners.
With this change Download can immediately check if it can be started and
sends correct notification.
PiperOrigin-RevId: 225967129
Problem: There is nothing in the Cache interface that enforces that
these methods are implemented by reading/writing content metadata,
however our own code (CacheDataSource) relies on this property since
it mixes use of [get|set]ContentLength and use of metadata. Using
metadata is the right approach because it minimizes the number of
index writes (e.g. it allows the redirect URI and the content length
to be committed by a single write).
Solution: Remove [get|set]ContentLength, which are redundant anyway,
and use metadata everywhere. Also expose the keys being used through
the public API; there's no particular reason why they shouldn't be.
We previously had an API for getting and setting content length, but
no API for getting and setting redirect uri.
PiperOrigin-RevId: 225383211
This adds the basic track selection capabilties (including tests).
The new capabilities are not exposed yet through the DownloadHelper implementations
and there will also be more helper methods (e.g. to select multiple audio lanuages at
once).
PiperOrigin-RevId: 224518477
We currently have two factory methods where it is completely unclear which one needs
to be overridden.
This change deprecates the old one, adds a Util method to easily map back from the new
to the old behaviour, and updates all implementations of the now deprecated method in
our code.
PiperOrigin-RevId: 224303560
[Problem]
As the alignment of each lineas are calculated individually, the
artificially introduced CENTER and RIGHT alignments can be mixed
with each other and with the default LEFT alignment. The mixed results
look worse than just using the original DEFAULT, and the readability
is radically decreased.
[Solution]
Pre-calculate the alignment for each line, and use the leftmost of them
for all lines. The intention of caption provider could be different, but
the worst case scenario is that we revert back everything to LEFT
alignment that is the only option in the CEA608 standard so we
show everything at the exact location it is set in the content.
The readability is never worse than the one given by the content
provider.
[Test]
This should influence CEA608 pop-up cations only. (Not roll up).
Test various live channels with this change.
Note: Beginning of commercials tend to have PAINT-ON mode as that
is immediately showing incoming characters, not just at the end
of the line like POP-on mode.
This instantiates the renderers and extract the capabilities. None of the known
renderes incurs any overhead during instantiation.
PiperOrigin-RevId: 224118511
- Enable GZIP for media playlist + encryption key chunk requests in
HLS, as we do during playback
- Pass around DataSpecs rather than Uris. This will be needed for if
we add manifest cacheKey support (which seems like a good idea for
completeness, if nothing else)
PiperOrigin-RevId: 224057139
We currently default to not caching data if the content length
cannot be resolved once the DataSource has been open. The
reason for this is to avoid caching progressive live streams.
By doing this we were accidentally not caching in other places
where caching is possible, such as DASH/SS/HLS segments during
playback if the server doesn't include a Content-Length header.
Also HLS encryption key chunks, which were very unlikely to be
cached during playback because we explicitly set FLAG_ALLOW_GZIP
(which normally stops content length from resolving) without
setting FLAG_ALLOW_CACHING_UNKNOWN_LENGTH.
It seems like a good idea to flip the default at this point,
and explicitly disable caching in the one case where we want
that to happen.
PiperOrigin-RevId: 223994110
This is in line with how Player.EventListener and AnalyticsListener methods are
defined and helps to only implement the callbacks needed.
PiperOrigin-RevId: 223991262
Moving most of the logic to the base DownloaderHelper helps to implement track
selection for downloading in a single place instead of multiple places.
PiperOrigin-RevId: 223964869
This option to block bandwidth already exists on the AdaptiveTrackSelection itself
but it's not currently possible to forward the total fixed track bandwidth
automatically.
PiperOrigin-RevId: 223785139
- Asus ZenFone GO (ASUS_X00AD_2)
- Sugar S9 (i9031)
- Redmi Note 3 (kate)
These devices trigger native crashes similar to
https://github.com/google/ExoPlayer/issues/4460
I'm not sure why Asus Zenfone Go (model: ZB500KL, device: ASUS_X00AD_2) was removed here
73af056da3
PiperOrigin-RevId: 223580393
A remove action will eventually just be the unique ID of the download
that should be removed. This is a step toward that goal.
PiperOrigin-RevId: 222832456
[Problem]
PAINT-ON mode is not implemented. From the compliance tests:
* RDC command has no effect except to select paint-on style.
* Next data are written directly to the display upon receipt.
* If other captioning is already on the screen, the four-row
limit is still in effect.
[Solution]
It is a rare use case, we do not support overriding characters in
existing cueBuilders as PAINT-ON would require. But several
compliance tests check if the screen is cleared when the mode
switch happens. We must keep the old captions when switching
to PAINT-ON mode
[Test]
- Live Over-the-Air content, beginning of commercials often uses
PAINT-ON mode
- Add DownloadAction.fromByteArray for symmetry with toByteArray
- Make DownloadService call fromByteArray, for symmetry with calls
to toByteArray
PiperOrigin-RevId: 222801703
We already have tests for comment blocks, and they already
pass because we discard the comment when we fail to parse it
as a cue. We should just skip it directly, however.
The input.getLength() check is invalid because the length may be
unknown (i.e. if the server doesn't include a Content-Length
response header when serving chunks).
Issue: #5063 (tangentially related only)
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222406347
This allows more efficient range removals and is consistent with addition,
which supports adding multiple elements in a single operation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222396310
This allows to account for bandwidth used by fixed track selections.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222383736
BandwidthProvider allows bandwidth allocation logic to be customized.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222293581
1. Pull up all subclasses of DownloadAction into DownloadAction
2. Add DownloaderFactory for Downloader instantiation, and DefaultDownloaderFactory
to replace the instantiation logic being removed from the DownloadAction
subclasses.
This change will upgrade existing action files gracefully (i.e. it does not
lose compatibility with the existing offline implementation, other than some
minor breaking changes to the API).
TODOs:
1. Move test methods from the XDownloadActionTest classes into DownloadActionTest.
This will be done in a subsequent CL. There's a lot of consolidation that can
be done here, including de-duplicating some of the test code added in this CL.
2. Look at merging DownloaderConstructorHelper into DefaultDownloaderFactory.
3. Use customCacheKey in DASH/HLS/SS Downloaders, for completeness.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222258983
createTrackSelections decides whether to create an adaptive or a fixed track seletion to create.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222231011
Forwarding the listeners to the notification update is meant to ensure we
only notify the listeners which were registered at the time the event happened
However, we currently just copy the reference to the actual list instead of
doing a deep copy of the listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222227735
This ensures that all callbacks use the same notification mechanism.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222226913
The update is actually unrelated and putting it all in one large update
object complicates adding the same update mechanism for other values.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222226825
WindowedTrackBitrateEstimator, uses future and past chunks in a window
of time to estimate track bitrate values.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=222065409
Currently no path may be chosen if
minBufferUs == maxBufferUs == bufferedDurationUs.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221639199
This is needed because the allocator can't be reused for example.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221638233
- Increase the search window size to fix TS seeking for problematic
media we've had provided to us.
- As per my comments on the issue, we should look at doing more here
to better fix the problem. This will solve the worst of the
immediate problem, however.
- The memory usage is non-trivial, particularly with the increased
search window size. I've made the allocations only live whilst
determining duration and seeking to address this. I've done the same
for PS just for consistency.
Issue: #5097
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221449988
The remaining work is to split Window.isDynamic so that it's
possible to represent a window that wont be appended to, but
may still be removed from.
Issue: #4780
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221439220
This is a precursor for fixing the ref'd issue. These classes are
well tested, so the tests passing should give you reasonable
confidence I didn't break anything :).
Issue: #5097
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221435824
LegacyVideoTrackSelection is the previous implementation (unchanged).
VideoTrackSelection is rewritten to extend AdaptiveTrackSelection.
An experiment is added to allow use of the new VideoTrackSelection
implementation. It's envisaged that this transition will be more or
less a no-op change. The experiment flag is only in case of bugs
during roll-out, and will be removed with LegacyVideoTrackSelection
upon successful transition.
VideoTrackSelection also implements discard-on-trick-play-exit, which
was a TODO in the previous implementation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221153827
- This brings it in line with PlayerControlView. The play action is displayed
instead, and pressing it seeks to the default position of the current window.
- Do the same for MediaSessionConnector
- Add support for PlaybackPreparer consistent with PlayerControlView
Issue: #5072
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221076008
This change also paves the way for splitting out functionality into a utility class.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=221070262
When in REPEAT_MODE_ONE, it's unlikely apps want next/previous methods
on the player to keep them in the same window. Music apps in particular
tend to implement next/previous functionality as though repeat mode were
off when in this mode (i.e. current song loops forever during playback,
but next/previous navigation still navigates to next/previous items).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=220469655
This fixes an issue where disabling audio focus handling
while audio focus is held would not release audio focus.
A new test was added for this situation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=220316866
*** Reason for rollback ***
Rolling forward again as [] should fix issue that prompted the rollback
*** Original change description ***
Automated g4 rollback of changelist 219130576.
*** Original change description ***
Re-enable codec re-use
Issue: #2826
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=220124362
It's no longer guaranteed that onOutputFormatChanged will always be
called when the renderer is re-enabled, since the codec may be kept
and its output format may not change. Hence we need to avoid resetting
state in onDisabled that we need when the renderer is enabled again.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219821519
Currently, MediaCodecRenderer's render loop does not have any time limit. We
always try to drain and feed as much buffers as possible. This may lead to a
pattern of feeding phase takes too much time from previous loop, which makes
the next draining phase drops all buffers, making these buffers available for
feeding all at once, and the pattern keeps repeating.
This CL adds an experimental parameter for setting a time limit. If the time
limit is exceeded, the feeding process stops even if more input could be fed.
The default behavior is unchanged
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219820386
This makes extractor selection a bit more efficient for some CMAF files.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219795105
This prevents leaving an inconsistent state after a EOF exception.
Issue:#5039
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219785275
Before this change, the player state would be STATE_ENDED then
STATE_BUFFERING (when the postroll ad was marked as played) then
STATE_ENDED again.
Queueing a final content media period with start point equal to
the content duration after a postroll ensures that the player
state doesn't change to STATE_ENDED transiently.
Switch from using C.TIME_END_OF_SOURCE to C.TIME_UNSET for media
periods that should not have an end point and are not followed
by an ad.
Content media periods before postrolls have end position
C.TIME_END_OF_SOURCE. If the postroll ad loads, its content
position is set to the content duration, which should be known
at the point of loading the postroll, then a final 'empty'
content media period with start position equal to its duration
is queued. If the postroll fails to load, this empty content
media period is queued up directly after the preceding content
media period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219443683
- Handling EVENT_PROVISION_REQUIRED is unnecessary because we handle
it via NotProvisionedException, which was thrown on all API levels.
- Handling EVENT_KEY_EXPIRED during playback is unnecessary. All it
does is cause an error to be thrown, but an error will be thrown
anyway out of the MediaCodec when it tries to use the expired keys.
It's currently a race condition where the error gets thrown from,
where-as having it always be thrown from one place is preferable.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219172021
This paves the way to cleanly fix the first two issues
listed in [] onDisabled will null inputFormat,
but nulling of codecFormat will remain tied to the codec
being released.
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=219125458
ExoCastMessage contains all player management messages that the sender app can
send to the receiver app. ExoCastMessages can be serialized as JSON strings.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218846977
- Only use bitrate when comparing two tracks if their bitrates are
actually different.
- For audio, prefer to use bitrate over selection flags.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218660886
- Improve variable naming
- In the edge case that bytes are transferred in a sample that
has 0 elapsed time, carry the bytes forward into the next
sample. If we don't do this then the estimate will be calculated
as though those bytes were never transferred. In practice I
suspect this very rarely occurs.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218551208
If EventDispatcher.removeListener is called to remove a listener,
and if the call is made from the same thread that said listener
handles events on, then it should be guaranteed that the listener
will not be subsequently invoked on that thread.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218331427
In ConcatenatingMediaSource, the source may be removed before it started
preparing (this may happen if lazyPreparation=true). In this case, we
shouldn't call releaseSource as the preparation didn't start.
Issue:#4986
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=218141658
There are multiple subtle issues with the current implementation:
1. setOperatingRate can cause a codec initialization even if the
renderer is disabled. This is not supposed to happen.
2. If the codec is released whilst the renderer is disabled, the
renderer can instantiate a new codec using the old format when
it's enabled again, only to immediately have to reconfigure or
release it if the actual format to be played is different.
3. Codec reuse does not take into account renderer configuration.
The specific case where this is problematic is if the video
renderer is re-enabled with a different tunneling session id.
The reused codec is then not configured correctly.
Also moved availableCodecInfos reset into releaseCodec for sanity.
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217924592
This is a no-op change as the respective values are not used so far but
the change makes the current state cleaner and is less error-prone.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217892421
- Added ability to override the DefaultBandwidthMeter network type.
- These methods currently only work properly if called before the
meter is used, but the plan is for them to be handled in the same
way as internally detected network changes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217887019
This method only ensured backward compatibility while the new version was not
public yet. Now ExoPlayer 2.9.0. is public, this workaround can be removed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217881691
I don't think there's any particular reason for releasing
dummySurface when we release the codec. It seems to make
more sense to decouple the two, and treat a dummySurface as
a resource that should be released on reset.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217711788
setSurface only sets the output surface on the codec if the
renderer is enabled or started. This was fine in the past
because the codec was always null in other states, however
the recent codec reuse work means this is no longer the case.
The output surface should always be set if the codec is
non-null. If setting the surface requires releasing the codec
instance, we should only instantiate the new instance if
enabled or started. This is in line with what onDisabled does
if flushing requires releasing the codec
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217676434
Just not doing it seems simplier and more obviously correct
than suppressing the warnings in our proguard file.
Issue: #4890
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217675527
1. Remove option to pass null context to Util.getNetworkType. IMO it's
clearer for the caller to just not call the method in this case.
2. Stop using deprecated DefaultBandwidthMeter.Builder constructor in
all but one place.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217147091
The assertion was so weak it probably wouldn't detect genuine
misuse of the DefaultAllocator API, so it seems fine just to
remove it.
We don't really know what happens when the player is allowed to
continue on the affected devices, but hopefully it either "just
works" or fails in a more graceful way.
Issue: #4532
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217113060
Robustness fix to make sure we ignore tags with known names, but
which are nested inside of unknown tags. For example we don't want
to parse the third period in:
<Period>...</Period>
<Period>...</Period>
<CustomTag>
<Period>...</Period>
</CustomTag>
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=217101630
For decoder reuse, we want disable() to flush the decoder. However,
if the flush needs to release the decoder for some reason, it seems
non-ideal to immediately re-initialize it. Re-initialization can
also throw ExoPlaybackException, which we don't want for disabling.
This change allows a variant of flush that wont re-initialize the
decoder if it has to be released, which will be used from disable().
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=216834862
reloading frmo snapshots. b/117347850. This is a no-op change as the current
default == _fullboot. When we globally flip and make snapshots the default,
these tests would fail and we are moving them over so that when we flip your
tests still pass.
https://groups.google.com[]forum/#!topic/mobile-ninjas/Y69PTAT5GyY
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=216634430
- Always clip to period duration for the last chunk. We previously
did this only when the last chunk explicitly exceeded the period
end time. We now also do it when the chunk claims to end at the
period boundary, but still contains samples that exceed it.
- If pendingResetPositionUs == chunk.startTimeUs == 0 but the
chunk still contains samples with negative timestamps, we now
clip them by setting the decode only flag. Previously we only
clipped such samples if the first chunk explicitly preceeded the
start of the period.
Issue: #4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215763467
- It's a no-op for now
- Renderers that want to support retaining resources will move
some functionality from their disable() implementations into
reset()
- ExoPlayerImplInternal will be updated to not always call reset()
immediately after disable(), which is what will enable resources
to actually be retained.
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215729783
This makes the following changes to improve consistency among the PlaybackInfo
values:
1. Update buffered position and total buffered duration after loading period
is set as both values are affected by a loading period update.
2. Add copyWithPosition to allow updating the position without resetting the
loading period.
3. Forward the total buffered duration to playing position updates
as it may have changed with the new playing position.
Issue:#4899
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215712328
When SubtitlePainter positions the cues centred in the given box, it must add
the left offset of the box to get the correct position.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215535289
SubtitleView forwards the cue box position to SubtitlePainter. This should be
the position relative to the canvas of the SubtitleView. Currently, however,
we forward the position relative to the parent of SubtitleView. That causes
problems if SubtitleView has a non-zero offset position to its parent.
Issue:#4788
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215535281
This removes the experimental bandwidth meter and uses it as the new default.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215404065
A lot of methods just forward to other methods and there is no conceivable
way a player should implement it another way. Moving these methods to a
base player class allows to remove duplicated code across our player
implementations.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215374192
For example, using ExoPlayer.STATE_IDLE falls back to the Player.STATE_IDLE
automatically and thus there is no need to keep the deprecated members.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215363841
If we prepare a deferred media period before the actual timeline is available,
we either prepare with position zero (= the default) or with a non-zero
initial seek position.
So far, the zero (default) position got replaced by the actual default position
(including any potential non-zero window offset) when the timeline became known.
However, a non-zero initial seek position was not corrected by the non-zero
window offset. This is fixed by this change.
Related to that, we always assumed that the deferred media period will the
first period in the actual timeline. This is not true if we prepare with an
offset (either because of an initial seek position or because of a default
window position). So, we also determine the actual first period when the
timeline becomes known.
Issue:#4873
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215213030
These two methods are meant to indicate to the track selection that it's
started or stopped being used. This is helpful to schedule background tasks
related to track selection (e.g. register network change listeners etc.).
This intention is not clearly stated in the method docs.
Also, all track selections of all prebuffered periods stay enabled in
parallel at the moment. As the whole purpose of these methods is to know
whether dynamic updates via updateSelectedTrack may happen, it's better to
only enable track selections of the current loading media period. That's
similar to how we always forward the loading track selections to the
LoadControl.
This change:
1. Improves the JavaDoc of TrackSelection.
2. Disables track selections if loading moves to another period.
3. Reenables track selection if loading moves back to a previous period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215199987
Switch to the recommended way of checking whether the app is running on a TV
device.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=215177587
Extend Sony workaround up to and including Oreo.
Due to a platform issue the Display API couldn't report 1080p UI
and 4k SurfaceView support until Oreo. Since Oreo it is still
common for devices to misreport their display sizes via Display,
so this change switches to using system properties up to and
including Pie.
On Pie treble may prevent writing sys.display-size so check for
vendor.display-size instead.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214987203
More specifically, if the parts of the Format that are used
for decoder configuration are unchanged.
Issue: #2826
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214791234
If a source is removed from the playlist, the player may still call createPeriod
for a period of the removed source as long as the new timeline hasn't been handled
by the player. These events are stale and can be ignored by using a dummy media
source. The stale media period will be released when the player handles the updated
timeline.
Issue:#4871
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214787090
This simplifies code skipping items in a playlist programatically.
Issue:#4863
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=214580742
This method needs to be called whenever the track selection of the current
loading period changes, but also when the loading period itself (and thus
the "loading track selection") changes. These are the same situations in which
we update the loading media period id and thus we can move both updates in
a common helper method.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213959982
From API 23 this uses the timed format queue. Before API 23 the
format is notified as soon as the buffer is queued.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213830729
Before this change we would reset the start trim to zero after initial
configuration (at the start of playback) and after seeking to any position. The
fact that no trimming was applied at the start of playback meant that after the
first period transition we'd see a mismatch between the next buffer timestamp
(equal to the duration of the period taking into account edits) and the duration
of audio submitted to the sink.
This change modifies the behavior so that we reset the start trim to zero only
if some audio was queued since configuration. This is incorrect in the case of
starting playback at a non-zero position, but fixes the common case of starting
at zero. As before, a later seek to any position is handled via a flush and
resets the trim as required.
Transitions from one period to the next are unaffected by this change.
One way to implement start trimming correctly would be to provide the input
buffer timestamp to the audio processors and only trim when handling audio from
the start of the stream, but that is a larger change so left for later.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213828511
After a period transition the first buffer queued has the sum of previous period
durations added to its source presentation timestamp. These durations take into
account gapless edits, but the check on the timestamp was based on the submitted
frame count, not the frame count after trimming.
This change fixes an issue where audio/video would gradually drift apart due to
accumulated error in the audio track position, which could lead to freezing due
to the audio renderer stopping being ready and switching to the standalone media
clock.
Issue: #4559
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213819908
Fixed and random track selection were still overriding the deprecated version
of updateSelectedTrack.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213637728
The only use of track selection factories is as adaptive track selection factories
in the DefaultTrackSelector. Using the fixed track selection factory here is dangerous
as it will throw if more than one track is selected.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213637500
With default of value set to -1, every single dropped frame is reported because of expression: if (droppedFrames >= maxDroppedFramesToNotify) { maybeNotifyDroppedFrames(); }
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213502573
The decoder doesn't claim to be adaptive, but if we're staying
in the same resolution we'll try and re-use the decoder anyway.
The H264 decoder can't handle this case on the Tab 4 can't deal
with this case.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213478378
This doesn't break apps which violate this policy. But it creates a clear
warning which is also likely to be reported in analytics tools.
Issue:#4463
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213442510
The DefaultTrackSelector can now be constructed without leaving out a
vital part of the initialization. This allows this new simple factory method.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213438163
Currently there is no way to disable (or reduce) the logcat output generated
by ExoPlayer.
Issue:#4665
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213421072
This allows creating multiple HLS media sources from a single Factory, as
required by the interface.
Issue:#4814
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213297850
ExoPlayer can be run on a background thread, but some components (UI and IMA)
only support players on the main thread. This adds some documentation and
assertions for that.
To simplify assertions, this also moves the getApplicationLooper method from
ExoPlayer to Player.
Issue:#4439
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213280359
Kotlin will throw NPE whenever a method returns null or an interface is
called with a null parameter and the respective values are not marked as
@Nullable.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213262886
To check the validity of a window index it needs to be compared with a greater
or equal sign to the window count.
Issue:#4822
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=213234403
Also prevent an unnecessary allocation when the removed range is empty.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212993427
Not having this annotation may cause Kotlin implementations to fail.
Issue:#4802
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212980643
If we can select a track that has a strictly higher score than a
selection already made for a renderer of the same type, we should
prefer it.
Issue: #4711
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212835895
- Make addMediaSource a specific case of addMediaSources.
- Make clear a specific case of removeMediaSourceRange.
- Make removeMediaSource a specific case of removeMediaSourceRange.
- Remove the unnecessary message handling and constants.
- Move a method so that depending appears before depended.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212809667
This allows to update the shuffle order after the ConcatenatingMediaSource
has been created. ShuffleOrder objects should be immutable to ensure thread
safety and thus there is no way to do this currently.
Issue:#4791
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212443146
- Fixes the referenced issue.
- Provides more consistent behavior for the edge case of empty
chunks (i.e. chunks containing now samples). Format changes
will now always be reported for such chunks, unless the empty
chunk is discarded from upstream before there's a chance to
do so.
Issue: #4533
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212443043
When the stream is changed in the audio renderer, the timestamps of the
samples can no longer be expected to match the calculations in the AudioSink.
This change tracks the samples at which the stream is changed and notifies the
AudioSink of the discontinuity.
Issue:#4559
Issue:#3829
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212435859
When a reset is pending the sample queues normally contain pre-seek
samples (which will be emptied when a pending load is canceled). The
position passed to discard will be a post-seek position. I don't
think anything bad happened in any of the cases being changed, but
discarding is unnecessary in such cases, and reasoning about such
cases is difficult.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212435556
- This makes it so that onDownstreamFormatChanged will occur before the corresponding
renderer event. This was not previously the case, since the renderer would typically
read the format (and report its event), then a sample (causing the
onDownstreamFormatChanged event).
- The remaining ones to update are ChunkSampleStream (DASH + HLS), which will be done
in a way that fixes#4533, and HLS.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212434874
If there's already a pending reset, we need only update the pending
reset position. We can currently end up calling cancelLoading more
than once on the loader for the same task, which is hard to reason
about (although I don't think anything actually broke in practice).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212432266
We currently apply the track.timescale whereas we should be applying the
track.movieTimescale. The parsing for the trak atom does this correctly
and the duration from the trak atom currently always takes precedence over the
durations from the stbl atoms as it's always larger.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212421687
Ignoring all edit lists if they don't start with a keyframe causes A/V sync
issues when valid edit lists are applied at the beginning.
This change allows such edit lists again but removes all samples before the
first keyframe (these samples would be ignored by the renderer anyway if at
the beginning OR cause visible distortions when appended to an unrelated
keyframe).
Issue:#4774
Issue:#4348
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=212244407
- There's no particular need to read or skip a sample before notifying
- Add missing isPendingReset check
Issue: #4533
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211959762
The default character set is always UTF-8 anyway on Android, but
we don't want our code to behave any differently where it's not
(e.g. robolectric test runs could potentially run in an environment
where UTF-8 isn't the default?).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211953885
1. Currently, we may throw source info refresh errors while the previous media
period is still playing.
2. We don't throw if the next period in a playlist fails to prepare and the
previous renderers are all disabled.
3. We throw source info refresh errors for playlists before playback reaches
the culprit source.
This change:
1. Defers the exceptions until all existing media periods have been played.
2. Checks for period preparation exception if the next period is not
getting prepared and the renderer time reached the next period.
3. Does no longer throw from ConcatenatingMediaSource.maybeThrowSourceInfo
RefreshError. The deferred media periods take care of that for each source
individually.
Issue:#4661
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211819436
To report DRM session metrics in the future as part of the listener, we need
a callback at the end of the drm session to get the final metric state.
For completion, the session acquired callback is also added.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211328412
Also make some javadocs more consistent with the rest of the library.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=211071559
The current structure tries to associate events to media periods and windows
based on the reported values and the current timeline. However the reported
EventTime may not always be consistent in case the timeline doesn't contain
windows or media periods yet or not anymore.
The recent changes to MediaPeriodId allow to use it as a unique identifer for
media periods independent of the timeline. This enables more accurate tracking
of the media period queue and prevents reporting events with inconsistent
data.
Issue:#4492
Issue:#4634
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210713120
This provides the list of currently buffered media chunks and iterators over
the potential next chunks to the track selection. Having these two parameters
enables more advanced decision logic based on this data.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210551812
This fixes or suppresses all reported issues by the code review linter tools.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210107759
There are C.CLEARKEY_UUID.equals(uuid) checks in FrameworkMediaDrm,
so uuid needs to be CLEARKEY_UUID, not COMMON_PSSH_UUID
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210094372
- Add @Deprecated on overrides of deprecated method.
- Suppress deprecation warnings where appropriate.
- Use non-deprecated alternatives where appropriate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210092434
This prevents problems caused by unintended double-registration of the same
transfer listener.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210078454
This option is currently not available as a non-null adaptive track selection
has to be provided. Adds a parameter "forceHighestSupportedBitrate" which
corresponds to the default fixed track selection for audio and video.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210073675
At the point of starting to play a postroll, source info refreshes for future
postroll ads in the same ad group would cause a seek that incorrectly identified
the media period to play as the content media period. Fix the logic in
getAdGroupIndexForPositionUs to address this.
Also handle empty postroll ad breaks by resetting the expected ad group index
when we send content complete.
Issue: #4710
Issue: #4681
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=210071054
Similar to getBufferedPosition and getCurrentPosition, getDuration should
mention that it also returns the duration of the current ad.
And, also similar to getContentBufferedDuration and getContentPosition, a
new method getContentDuration simplifies querying the content duration while
playing an ad.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209914696
The response headers of the last load are available from the loading source
when creating media source events and can be easily forwarded.
Issue:#4361
Issue:#4615
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209900693
The doc can be improved by enumerating and linking all possible values from
the interface doc.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209772309
Apps targeting P or later now must request this permission in order to
use foreground services.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209762160
Also remove NonNull, since we assume NonNull by default. Except
where explicitly overriding a method with NonNull annotated args,
in which case we're still expected to use it.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209758204
Some tests were flaky because of the PlayUntilPosition action which called
player.setPlayWhenReady from the wrong thread. Also fixed some other misc
flakiness.
ExoPlayerTest seems to be non-flaky now (tested with 10000 runs).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209743076
They don't need to be accessed publicly and are can be moved into the
respective chunk sources. This is the same structure used for Dash.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209507217
The MediaPeriodId with index is only properly defined together with a
timeline containing the index. Changing it to the period uid allows to use
the MediaPeriodId independent of the corresponding timeline.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=209430257
The reason for the change is that variable substititution requires
master playlist variable definitions at the moment of parsing.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208997963
When playing a playlist where the exact maximum input size is known from the
container for each item, it may be necessary to recreate the decoder to increase
its maximum input buffer size at the point of transitioning from one item to the
next, which can make transitions non-seamless.
Scale up the initial video decoder maximum input size so playlist item
transitions with small increases in maximum sample size don't require
reinitialization.
Issue: #4510
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208650244
Also fix an NPE in FfmpegAudioRenderer if sampleMimeType wasn't set.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208230947
Also add support for parsing PlayReady DRM information
Issue:#4180
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208094290
Future changes for checking codec capabilities will go in the renderer rather
than in the codec selector, so the codec selector only needs a MIME type as
before.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208076716
Add automatic audio focus handling to SimpleExoPlayer. Audio focus
handling is an opt-in feature that can be requested by passing
the system's AudioManager and an AudioFocusConfiguration to
SimpleExoPlayer.setAudioFocusConfiguration.
When audio focus is being managed by SimpleExoPlayer, the player
will transparently handle pausing playback during
AUDIOFOCUS_LOSS_TRANSIENT, as well as lowering playback volume
during AUDIOFOCUS_LOSS_TRANSIENT_CAN_DUCK.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=208045732
Also locally cache length in BaseDataSource and use zero cost
castNonNull to make sure there's no performance regression.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207715734
* Make dedicated section in RELEASENOTES
* Clean up AMR FACTORY
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207550281
Lint likes all constants for an IntDef to be declared explicitly
in switch statements.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207545682
Lint likes flags to be declared in this way, for safety, apparently
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207545382
This CL adds support for seeking witin TS streams by using binary search. For
any seek timestamp, it tries to find the location in the stream where PCR
timestamp is close to the target timestamp, and return this position as the
seek position.
Github: #966.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207529906
For now, just allow any prefix (and don't check the namespace).
Checking the namespace requires turning on the XmlPullParser
namespace awareness feature, but this can only be done before
parsing, and I think requires us to specify the namespace when
querying other attributes. This would also risk breaking services
who currently don't set namespaces correctly.
It's possible we'll run into similar issues with the few other
tags (e.g. mspr:pro). We should revisit enabling namespace
awareness if/when we see this.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207526883
EventSampleStream.readData required eventStreamUpdatable to be
false for END_OF_STREAM to be returned, but it was only being
set to false when the manifest became static. This change also
sets it to false if the period is not the last one in a dynamic
manifest. It also renames it the parameter to appendable, since
that's what it really represents. Events may still be removed
from the start of the EventStream as the period starts moving
out of the live window.
Issue: #4492
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207517265
- Use ConstantBitrateSeeker to implement seeking for ADTS format. Since most
ADTS streams are VBR, we use the average bitrate of the first 1000 frames as
the average bit rate.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207509651
Currently, MetadataRetrieverImpl uses MediaCodecVideoRenderer to renderering
frames to capture. It suffers from 2 issues:
- MediaCodecVideoRenderer has a lot of logic to time frame release, including
drop frames if late or try to keep up with feeding speed etc... These are not
necessary at all for frame retrieval.
- MediaCodecVideoRenderer always tries to render 1 frame after video surface
update. This may some times lead to the wrong image being rendered for
MetadataRetriever.
This CL replaces this with a custom video renderer, that does not time frame
releases, and only render first frame after position reset / renderer
re-enabling.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207276937
The error is spurious, and is due to an incorrect annotation in
the framework.
[Internal: b/32137960]
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207234603
For background on why doing this works, see below. I don't want to change
how we get our Cipher instance in non-test code, since PKCS7 always works
on Android. It's only when the tests are running on a non-Android host
machine that they can fail. An alternative would be to make it an androidTest,
but androidTests are slow.
------
Background:
"While Java considers PKCS5 and PKCS7 padding to be the "same" (and
one should always use the string "AES/CBC/PKCS5Padding" because
"AES/CBC/PKCS7Padding" will cause NoSuchAlgorithmException to be thrown
when initializing an AES block cipher using the Java crypto API), I
consider this a gross misnaming in the Java platform because the pure
technical definitions of these paddings are not the same."
Ref: https://stackoverflow.com/questions/10193567/java-security-nosuchalgorithmexceptioncannot-find-any-provider-supporting-aes-e
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=207234518
Amazon like to use Device.MODEL, so key on that instead for
these workarounds.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206917935
When user seeks to an unprepared period, since there is no period being played, currently the track groups and track selections are still the ones from previous period. This CL changes it so that when such seeking happens, PlaybackInfo's track groups and track selections are changed to empty.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206916109
This is needed for implementing (optional) support for audio focus handling in a
later change.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206899837
This CL adds support for seeking within PS streams by using binary search. For
any seek timestamp, it tries to find the location in the stream where SCR
timestamp is close to the target timestamp, and return this position as the
seek position.
Github: #4476.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206787691
Currently, we have KeyStatus, KeyRequest and ProvisionRequest as interface, so we can use
custom implementation for purpose such as wrapping native objects. However, these interfaces and the corresponding default classes are only used to bundle data, and in all existing implementation (including native code), it's just as efficient to just use the Java default implementation. Therefore we can just get rid of the interfaces, and change
the interfaces into classes with the default implementation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206765389
There is some risk associated with this change, as audio track buffers come from
shared memory and limits may be device-specific. I've tested these sizes on
Nvidia Shield TV and Nexus Player on various builds. The maximum size allocated
is about 800 KB. We could implement support for retrying creating the audio
track if it fails to initialize, but it seems preferable to avoid the extra
complexity required to do that unless we know it's necessary to work around
device-specific limitations.
Issue: #3803
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206749222
The platform fix was merged into O MR1, not O. Nexus Player has
not received this build.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206734342
Add TeeAudioProcessor that doesn't modify the input audio but writes it to an
AudioBufferSink, and WavFileAudioBufferSink for writing audio to a .wav file.
This is intended to be used for diagnostics and debugging.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206717458
MatroskaExtractor was checking for INDEX_UNSET as the sample count for buffers
not containing syncframes, but actually 0 was returned for these. Theoretically
this could prevent us starting to play a TrueHD stream as we wait until we can
read the sample count from a syncframe before accepting the audio in
DefaultAudioSink, but it seems that rechunking avoided this issue arising in
practice.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206575462
The looping media source doesn't convert the media period id to the externally
visible media period id. And the merging media source reports media period
creations multiple times which will break listeners assuming a media period
with a specific id will only be created once.
Also amend the doc for MediaSource.createPeriod to reflect that media periods
created in parallel do not actually have the same id.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206327241
Period transitions with non-zero start position happen too early as the
playing period is advanced as soon as the renderer offset is reached not
taking into account that the start position needs to be added to that.
Issue:#4583
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206310328
AudioTrack checks the channel configuration against a mask of allowed channels.
Before Android M the check in getMinBufferSize would always fail for 8 channel
output.
For Android L constants are available to build the required channel
configuration for a conventional 7.1 setup and these constants are part of the
allowed channels mask, so switch to using them.
Before Android L the constants for 7.1 aren't in the allowed channels mask, so
discard channels to give a 5.1 stream.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206307892
Remove minLoadableRetryCount from HLS components in favor of
LoadErrorHandlingPolicy#getMinimumLoadableRetryCount.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206298419
The new method allows to add TransferListeners after the DataSource
has been created. Most implementations just forward to their wrapped
upstream DataSource. Implementation which directly read data implement
BaseDataSource instead.
Also removes the temporary default no-op implementation in DataSource.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206289986
This helps to distinguish between the MediaPeriodId the deferred media period is being
created with and the MediaPeriodId which is used to create the actual underlying period.
This serves two purposes:
1. The error reporting of ad prepare errors uses the correct media period id (the
externally visible ad media period id).
2. The transition to using media period uid instead of indices is simplified.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206160463
Using our own no-op castNonNull prevents linking into checkerframeworks library.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206152148
Rewrite FlacBinarySearchSeeker and extract out the core binary search algorithm
into BinarySearchSeeker class so it can be re-used for other formats.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=206012900
This changes the default initial bitrate estimate to be country (group) and
network type specific. The existing overwrite still works as before and new
overwrites for the country or specific network types are provided for
customization.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205972705
While the timeline is empty, we keep a dummy MediaPeriodId in PlaybackInfo with
a period index of 0. We leak this MediaPeriodId in actual use in these
situations:
1. When issuing an IllegalSeekPosition after preparation. The timeline becomes
non-empty, but the media period id stays at its dummy value.
2. When re-adding sources to a previously empty timeline. The dummy period id
is used as the start position for the new non-empty timeline.
This change makes:
- the constructor of PlaybackInfo using those dummy values more explicit
- prevents the issues above by using the correct default position in the new
non-empty timeline for the above mentioned cases.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205803006
All known instances use DataSource as generic type and thus code can be simplified
by removing the generic type altogether.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205798542
Using this surface it's possible to play 360 videos in a non-VR Activity that is
affected by phone and touch input.
RELNOTES=true
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205720776
This reduces the number of calls to the DataSpec constructor and minimizes the number of files that need to be updated when adding a new DataSpec parameter (ex: followup []
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205719005
As the manifest and media data sources can be the same now, we can provide
a simplified constructor with just one data source factory.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205658046
This allows to automatically forward bandwidth estimate events to
AnalyticsListeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205642752
This removes the need to populate the entire period for the common usage of
getting the uid from the period.
Also add default implementation to get period by uid.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205638265
The end position is needed to make the MediaPeriodId unique as multiple
content periods may only vary in this parameter.
This also simplfies some other comparisons where the end position needed to
be compared in addition to the media period id.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205634508
The number is shelved in calls to queue.clear() to keep it for the next
media period. However, the queue may also become empty by repeated calls to
advancePlayingPeriod which may happen when seeking to an unprepared period.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205376036
Currently, when the VideoRendererOutputCapturer updates output size, it will
set the new surface, then release the old surface. This can lead to problem
when both surface depends on EGL, since the second release() can release EGL
resources of the first surface.
This CL reverses this process, and ensures that the old surface is released before the new one is created.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=205235451
Setting the transfer listener on the data source factories is only needed for debug
purposes, logging and for custom bandwidth metering which doesn't use the
player-provided bandwidth meter. As such, it is not compulsary and it should be easy
to set up the data source factory without a transfer listener.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204926083
This was only needed temporatily until we could ensure that the player always
provides a BandwidthMeter.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204903640
As part of this change:
- Don't apply the workaround on API level 27+. GTS coverage
should prevent such devices from existing.
- Use Util.DEVICE consistently.
- Remove the "// Device name", which don't really add much
but make extra work when updating the list.
Issue: #4468
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204889657
This will allow deduplicating the argument from all Loader clients.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204889331
This bandwidth meter is then forwarded to the track selection and as a transfer
listener to media and data sources.
When no bandwidth meter is specified in the ExoPlayerFactory methods, a static
singleton instance will be used.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204881497
When notifying the bandwidth listeners of new samples, the forwarded values
need to be final to prevent concurrent access. Putting the event forwarding
into a separate method ensures the values are final.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204877650
The sample queues haven't been created when the first init call
occurs. In this case we need to set sourceId when we subsequently
create the queues.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204467538
1. Copy label into derived formats
2. If audio is the primary track type, copy additional fields from
the variant formats. This is probably a no-op in practice, since
I don't think variant formats have these fields set anyway, but
it seems like the right thing to do in case they ever are set in
the future.
Note: It's a bit strange to use createXContainerFormat rather than
createXSampleFormat, but in practice the methods used here are
better matched for what we're trying to do.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204467287
After [] we support default font size for TTML, relative to the cellResolution of the document. However, this introduced a bug that makes TTML font-size in such case always follow the cellResolution font size, even when SubtitleView.setApplyEmbeddedStyles(false) and SubtitleView.setApplyEmbeddedFontSizes(false) were used.
This CL updates the fix so that the default font-size using cellResolution works in the same way as other embedded styles, and can be turned off using setters from SubtitleView.
GitHub: #4491
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204467033
For the MetadataRetriever, for certain queries, after setting up the player to
render a frame (by seeking to the position), sometimes the player will seek to
the same position and ignore the seek, leading to the frame not being captured,
leaving the retriever in deadlock, waiting for the frame forever. This CL adds
a retry timer to avoid this and make sure we can return query result after some
time.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204460200
1. Prefer label and language values in the manifest to those in
the media. This is particularly helpful if the sample format
contains "und" as the language.
2. Copy label when deriving formats in HlsSampleStreamWrapper
3. When there's only one variant in HlsSampleStreamWrapper, use
the regular copyWithManifestFormatInfo. This allows more
information to be retained from the sample format.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204340008
That allows to add listeners after the BandwidthMeter has been created which is
helpful as the BandwidthMeter instances are often long-lived static instances.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204255299
This allows to iterate through the available segments of the playlist.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=204100116
Add supports for reading duration for a PS stream by reading SCR values from
the header of packs at the start and at the end of the stream, calculating the
difference, and converting that into stream duration.
Github: #4476
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203954752
It has now become an empty shell as the real TransferListener provides all its
methods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203950443
There are only two types at the moment and we can therefore use a boolean.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203937357
[Problem] Sarnoff spec complaince tests streams are MPEG2 TS.
Currently, parsing CC data from MPEG2 TS is not supported
[Solution] Parsed CC data from MPEG2 stream because all Sarnoff streams are MPEG2
Also fixed showing "remove notification" when download is completed.
Issue:#4469
Issue:#4488
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203927268
Power Comparison:
TextureView 1080p 720p
H264 HW 498, 496 507, 478
VP9 RGB 1050, 1104 1185, 1152
VP9 ANativeWindow 1070, 985 700, 674
GLSurfaceView
VP9 YUV 1075, 1112 716, 635
SurfaceView
H264 HW 419, 409 397, 377
VP9 RGB 1044, 1139 654, 671
VP9 ANativeWindow 975, 835 617, 623
VP9 MediaCodec 683, 679 488, 476
Measures average current drawn mAH on a Nexus 6 at full brightness from time t=3 to t=95 seconds. The same clip was used for all tests. Two measurements were taken for each category.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203847744
It's no longer text specific (it's used for metadata as well, and
in theory could apply to any stream in which samples contain multiple
sub-samples)
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203767825
Until now, the streams were released and re-enabled for each type of stream
(primary, event, embedded) in that order. That leads to problems when replacing
streams from one type to another (for example embedded to primary).
This change restructures the track selection to:
1. Release and reset all streams that need to be released or replaced.
1(a). Including embedded orphan streams.
2. Select new streams.
Issue:#4477
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203751233
Where a device has this issue, it most likely applies to all
SOC vendor provided decoders, which are normally the only
video decoders other than the OMX.google software decoders
on the device. The fact we currently only blacklist for AVC
decoders is likely just a side effect of AVC's popularity.
I checked two devices already on the blacklist, and both
failed with other SOC vendor decoders on the device as well
(but passed if forced to use OMX.google decoders instead)
Issue: #4468
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203728285
Viewport constraints apply to adaptive content even if the
actual playback isn't adaptive (i.e. because the selector
ends up making a fixed track selection).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203726831
- Support handling frame queries (i.e get frames at times, output to certain
sizes) from MetadataRetriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203489788
If there is only one track, we can assume that both boxes refer to the same track
even if the track indices don't match.
Issue:#4083
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203485872
MediaDrm.provideXResponse methods only accept the response
corresponding to the most recent MediaDrm.getXRequest call.
Previously, our code allowed the following incorrect call
sequence:
a = getKeyRequest
b = getKeyRequest
provideKeyResponse(responseFor(a));
This would occur in the edge case of a second key request
being triggered whilst the first was still in flight. The
provideKeyResponse call would then fail.
This change fixes the problem by treating responseFor(a)
as stale. Note that a slightly better fix would be to
defer calling getKeyRequest the second time until after
processing the response corresponding to the first one,
however this is significantly harder to implement, and is
probably not worth it for what should be an edge case.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203481685
Both boxes should contain the same list of track indices. However, if only one
track index in each list does not match, we can just assume that these belong
together.
Issue:#4477
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203481258
Since this is an ongoing problem, it's reasonable that we allow
developers to toggle these workarounds without too much hassle.
Issue: #4468
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203364488
This allows to register a listener on an outer wrapping data source which
receives data transfer events from the wrapped source.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203358981
This wires up recent changes of passing a transfer listener to the MediaSource and
allowing DataSources to accept new listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203280818
Add supports for reading duration for a TS stream by reading PCR values of the PCR PID packets at the start and at the end of the stream, calculating the difference, and converting that into stream duration.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203254626
Codec initialization may fail in creation, configuration or when start()ing the
codec. If codec initialization fails, there may be other codecs available that
could handle the same format, but currently ExoPlayer can only try to use the
first listed codec for the input format and gives up if it fails to initialize.
This change implements support for optionally falling back to alternative
decoders if initialization fails. MediaCodecSelector can now return a list of
decoders to try in priority order, and use the Format when choosing a codec.
With the default implementation, the codecs and order come from MediaCodecList,
and matches the order used internally by MediaCodec.createDecoderByType (which
implements the same kind of fallback though only to the creation step, without
configuring/starting the codec).
This feature is useful for apps that want to play several videos concurrently on
devices that have software decoders (like OMX.google.h264.decoder), as the new
behavior allows new codecs to be created when no hardware-accelerated decoders
are available.
The list of available codecs is queried when initializing the codec after a
format change that requires a new codec to be instantiated. When a decoder fails
to initialize it is removed from the list of available decoders and won't be
tried again until the next format change (or until the renderer is disabled).
Note: this change does not affect the renderer capabilities API, as when
checking format support we don't know which codec will be used.
Issue: #273
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203242285
This ensures compatiblity of other apps depending on our public GitHub code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203129076
This allows to iterate through the available chunks of the stream.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203105813
This allows implementations to notify when the transfer is about to be started.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203102117
This allows all leaf data sources (i.e. ones which do not forward the requests
to other data sources) to accept multiple listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=203097587
This allows to use this queue in the track selection in the future.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202954871
This will allow to provide available information about future chunks to the
track selection.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202940994
The Android Test Support Library is being renamed to AndroidX Test, with its root java namespace changing from android.support.test to androidx.test.
And code location changing from tp/android/android_test_support to tp/android/androidx_test.
More information: []
TAP global presubmit: []
BUG:
79205333
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202796842
The new method allows to add transfer listeners (e.g. the BandwidthMeter) after
the data source has been created. To simplify the implementation for
subclasses, this change also introduces a BaseDataSource which handles
the list of listeners and the listener registration.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202649563
In the future, this allows to register the BandwidthMeter (managed by the player)
as a listener to all media transfers related to this media source.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202643946
- Extract ConstantBitrateSeeker from Mp3 package into a more general
ConstantBitrateSeekMap.
- Use this seekmap to implement seeking for AMR format.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202638183
From the spec:
If the EXT-X-INDEPENDENT-SEGMENTS tag appears in a Master
Playlist, it applies to every Media Segment in every Media
Playlist in the Master Playlist.
----
This requires propagation of attributes from the master
playlist to the media playlists. This CL only includes
independent segments, but other inheritable attributes
will be supported in following changes. Other inheritable
attributes include variable substitution definitions and
session keys.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202628422
It's quite hard to find the defaults currently. Placing them
on each variable makes them easier to find.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202495929
Currently, we are discarding all TS PES payload readers on seek. This is to fix
a bug that makes PES stream readers read packets inconsistently after seeking (first
time, the readers ignore all packets before PMT, second seek time after PMT is
read, the readers will read all packets before PMT).
This works fine if we don't support seeking to arbitrary position within the TS
stream. However, this may lead to a problem if we want to support seeking, because
some TS streams only have track format at the begining of the stream, and reseting
the payload readers after seeking can lead to track format not available anymore.
This change reverts the original fix (do not discard TS PES payload readers on seek
anymore). Instead, in non-HLS mode, after we have processed all PMTs packets in
the strea, we will re-seek to the beginning and perform readin again to make sure
the result will be consistent across multiple seeks. This is a prepare step to
support seeking in TS streams.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202466233
This url is readily available when creating media source events (from the
data source) but so far not published to external listeners. This change
adds a new field to LoadEventInfo which corresponds to DataSource.getUri().
Issue:#2054
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202459049
Currently we immediately stop searching after we found one video and one
audio track. This change adds some leeway to detect additional tracks.
Issue:#4406
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202455491
Also moved shared code to SegmentDownloadAction between its subclasses.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=202294880
When getMedatadata from an ExtractorMediaPeriod, due to the MediaPeriod refreshing its Timeline twice, the MetadataRetriever may wrongly reset periodIndex of the current trackGroup to C.TIME_UNSET, which makes it unable to handle subsequent metadata queries.
This CL changes the MetadataRetriever to keep track of periodUid of the current trackGroup instead of period index. PeriodUid is not changed on timeline refreshing, so is not prone the existing problem.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201969350
Refactor sniff(), and extract a few methods out from read() to make it look clearer. This CL does not change any functionality.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201933207
The DefaultAnalyticsListener was added for selective overrides. Now that Java 8
support is enabled, these selective listener overrides can be implemented
more easily and more flexible using default methods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201931770
The DefaultEventListener was added for selective overrides. Now that Java 8
support is enabled, these selective listener overrides can be implemented
more easily and more flexible using default methods.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201695490
Both values are helpful for event reporting, but are only available while
the data source is open. Similar to bytesLoaded, they need to be reported
through the Chunk.
Issue:#2054
Issue:#4361
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201664907
This will make it possible for ImaAdsLoader to access the player volume when
used with SimpleExoPlayer.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201664189
Replace assertThat(a >= b).isTrue() with assertThat(a).isAtLeast(b) because it
reads more natural, and in case the assertion fails, it will print out the
actual values to help debugging.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201371993
Currently, the looper of the thread the player is created on is used (or the
main looper if this thread doesn't have a looper). To allow more control over
the threading, this change lets users specificy the looper which must be used
to call player methods and which is used for event callbacks.
Issue:#4278
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201331564
Also switch from using a CommentFrame to a new InternalFrame type for ID3 data
stored with ID '----', to distinguish internal data from actual ID3 comments.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201315254
Added a capturer that can capture output from video renderer into bitmaps. This
class uses SurfaceCapturer to setup a surface, then configures this surface as the
output for a video renderer. Once the output is set, it will capture the
output frames from the video renderer and return them as bitmaps.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=201148184
This replaces the workaround calculation which was needed before the
referenced bug was fixed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=200217241
The helper method only reported DATA_TYPE_UNKNOWN even if the actual type
is known.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=200067296
Currently only the buffered position in the current media period can be queried.
To achieve this, we save the buffered positions of all MediaPeriods to the
PlaybackInfo together with a list of MediaPeriodIds. ExoPlayerImpl can then
determine the correct buffered position for multi-period windows and windows
with midroll ads.
In addition, this change adds two new convenience methods to the Player interface
to query the total buffered duration across all windows and to get the buffered
duration of the content while playing an ad.
Issue:#4023
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=200041791
This allows the AnalyticsCollector to register itself as a VideoListener to
get these updates automatically instead of relying on the user to provide
updates.
The ViewportSizeReporter was amended to do the pixel to dp conversion itself.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199796532
It doesn't really serve a purpose and is not automatically triggered.
Apps need to trigger it manually through
AnalyticsCollector.notifyNetworkTypeChanged which is easy to forget.
Moreover, the current network type can be obtained by Util.getNetworkType
at any time when it's needed without the need for a listener.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199790033
Allows DrmInitData to carry a license server URL when the media declares one.
Issue:#3393
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199643743
This reports video and audio format selections.
See [] for spec details.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199627176
This allows to detect changes in the surface size. SimpleExoPlayer already
has the necessary listeners to report size changes for all surfaces whose
lifecycle are managed by SimpleExoPlayer.
In a subsequent change, AnalyticsCollector can be registered as a
VideoListener to automatically notify of surface size changes.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199605434
Using new Handler(this) in a constructor potentially leaks an uninitialized
object. This is mostly not a problem because we don't use the Handler within
the constructor. Added a Util method to keep the warning suppression local.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199605377
When switching from Stack to ArrayDeque, calls to add() need to be replaced by
calls to push() because ArrayDeque treats the first element in the list as the
top of the stack.
String.split() has counterintuitive default behavior; see
https://github.com/google/error-prone/blob/master/docs/bugpattern/StringSplitter.md.
I've switched usages to pass limit = -1 argument, which means empty elements are
no longer removed from the end of the returned array.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199472592
Currently, we are using 2 copy steps for PixelCopySurfaceCapturerV24:
- Copy from the source surface to a similarly sized bitmap (using PixelCopy API).
- Copy from the bitmap to a scaled bitmap, based on the given output size, using scaledBitmap API.
This CL merges the 2 steps and uses PixelCopy API to perform copy directly from
the source surface to the bitmap of the given output size.
However, since our test uses scaledBitmap API to create reference bitmap from original image, due to various Bitmap copy optimizations (filtering, antialiasing etc...) that are different between PixelCopy API and scaledBitmap API implementations, the result images cannot be the same. We can perform the our tests by asserting that their PSNR value is very high, which means they are very similar.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199472005
This enabled the player to specify the bandwidth meter after the track
selector and the track selection factory have been created.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199286400
The implementation keeps track of QoE sessions and forwards events to the
field reporters of the relevant sessions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199269574
If a MediaPeriod uses a Loadable, then there are typically
reference chains of the form:
LoadingThread[GCroot]->Loadable->MediaPeriod->Player
Where the player is the MediaPeriod callback. When the
player is released, this reference chain prevents the
player from being GC'd until Loadable cancellation
completes, which may not always be fast. This in turn
will typically prevent the application's activity from
being GC'd, since it'll normally be registered as a
listener on the player (directly or indirectly via
something like a view).
This change mitigates the issue by removing references
that the MediaPeriod holds back to the player. The
MediaPeriod will still not be eligible for GC, but the
player and application activity will be, which in most
cases will be most of the leak (in terms of size).
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199143646
This happens when the device screen is locked.
This fixes a previous attempt to fix the problem.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199130325
This will allow the player to obtain the transfer listener used by the
bandwidth meter in order to pass it automatically to the relevant data
sources.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199124880
This helps to use the AnalyticsCollector without SimpleExoPlayer. Currently,
that may be problematic, if the contructor needs the player, but in order to
create the player, one already needs the AnalyticsCollector as a listener for
the renderers.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=199105012
A CacheKeyFactory can be passed to the CacheDataSource constructor, allowing clients to dynamically generate a custom cache key for any given upstream uri.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198878723
This simplifies Loadable implementations, and also removes the
possibility of an incorrect Loadable implementation causing the
wrong Loader.Callback method being called (perviously, for the
correct method to be called, we relied on isLoadCanceled being
implemented correctly).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198871133
There is the small (but unlikely) chance that the uids clash because the
Objects have the same hash code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198855724
This adds an optional parameter to ConcatenatingMediaSource to prepare
child sources only lazily when are needed. This is helpful for long playlists
of media sources with manifests to prevent a lot of simultaneous manifest
loads.
Issue:#3972
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198855676
This allows injection of custom implementations and configuration of
DefaultHlsPlaylistTracker without modifying the HlsMediaSource interface.
Issue:#2844
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198846607
The bug here was that we'd create a VideoFrameReleaseTimeHelper
using whatever context DefaultRenderersFactory has, and it would
then hold a reference to that context via DisplayManager. A leak
could then occur if the player outlived the life of the context
used to create it (which would be strange/unusual, but not
impossible).
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198747599
As highlighted by the ref'd issue, we can end up with
memory leaks if Loadable.load implementations take a long
time to return upon cancelation. This change cuts off one
of the two problematic reference chains.
This doesn't do much about the ref'd issue, since there's
a second reference chain that's much harder to deal with:
Thread->LoadTask->loadable. But since it's easy just to
cut this one off, I figure it makes sense to do so.
Issue: #4249
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198735386
This makes the requirement that all calls are made on one thread more
explicit and also mentions this in the Getting Started guide.
Issue:#4278
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198694579
Set content length and redirect uri in a single transaction.
New: Fixed the code where DataSpec.uri is set to null in []
Automated g4 rollback of changelist 196765970.
*** Reason for rollback ***
Fixed the code where DataSpec.uri is set to null in []
*** Original change description ***
Automated g4 rollback of changelist 194932235.
*** Reason for rollback ***
This CL breaks the playability of Mango's offlined progressive videos.
*** Original change description ***
Set content length and redirect uri in a single transaction
NORELNOTES=true
NO_BUG
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198370211
When the player state is changed from an event listener callback, we may
get recursive listener notifications. These recursions can produce a wrong
order, skip or duplicate updates, and send different notifications to
different listeners.
This change serializes listener notifications by clustering all update data
in a helper data class and adding the updates to a queue which can be handled
in a loop on the outer layer of the recursion.
As playWhenReady updates also reference the current playbackInfo, we need to
redirect the listener notifcations for setPlayWhenReady to the same queue.
Issue:#4276
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=198031431
Use PixelCopy API for the first SurfaceCapturer implementation. This supports
devices from API 24+.
Github: #3609.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197732711
Some module/extensions couldn't use the static test so far because all files
needed to be put on the blacklist. To ensure the test it set up for all
modules, this fixes at least one file for each of the modules.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197731449
Currently, the sample queues are lazily enabled when they are first read from.
This causes problems when the player tries to discard buffer and the
HlsSampleStreamWrapper assumes the sample queue is disabled even though it's
actually enabled but hasn't been read from.
This change moves setting the sample queue index of the sample stream back into
HlsSampleStreamWrapper. It enables the sample queues at track selection if the
queues are already built, or immediately after they have been built for
chunkless preparation.
Issue:#4241
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197415741
InstrumentationTestCase has been deprecated, and it does not offer some useful
features, such as targeting SDK version level for tests, or skipping tests if
necessary.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197141082
A new playback nonce is created for each playback of the same item. Thus we
need to inject the nonce dynamically into the data source factory.
This CL adds the DataSource which does the actual insertion into the request
URLs and a MediaSource which listens to new media periods, to request the
nonce and to configure the data source factory for this media period to use
this nonce.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197134217
This CL allows failure if a playlist load fails with a non-blacklistable
error. For example, loss of internet connection.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=197006579
For TTML, if the font size is expressed in %, the font size should be relative
to the cellResolution of the document which we did not support before. This CL
adds support for handling this correctly.
Note that this still does not support font size using c unit.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196985694
SparseIntArray.get(key) defaults to zero for missing keys (the null check was
left over from when a Map was used).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196957452
Also update TrackSelectionView with nullness annotations.
Issue: #4263
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196849706
If the caption line has no text (empty line or only line break), we should not
display its background.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196823319
Due to a bug, for each TTML node, when applying its style to the encompassed
regions, it applies child nodes's styling several time for each region (the
number of time is equal to the number of region). This leads to a styling issue
if there are multiple regions in a node displayed at the same time in TTML file.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196810046
The sample size from the stsd box takes precedence over the sample size in the
stsz box.
Also remove assumption that C.INDEX_UNSET is -1 in ChunkIterator (which is a
no-op change).
Issue: #4228
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196661751
Added FlacBinarySearchSeeker, which supports seeking in a FLAC stream by searching for individual frames within the file using binary search.
Github: #1808.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196587198
Fix suppressing initial "state changed to paused" listener invocations
for new added tasks that are immediately started.
Notify listeners for loaded actions queued state if they are not started
immediately.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196542693
The app can set the player to null while messages from the player are still
in flight. This may cause NPEs.
Issue:#4238
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196504077
The lint error suppression only works locally and not for external developers
who still see the lint error and need to suppress it themselves.
This changes 'implementation' to 'compileOnly' in gradle to prevent the
dependency from being exported. Also removes the local lint suppression.
Issue:#4234
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196251407
This makes way for reusing EGLSurfaceTexture in other places, such as metadata
and frame retriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196240576
This is useful to get hold of the manifest to then obtain DRM init data in
the download flow for protected content (without having to download the
manifest again).
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=196168938
Open was not calling through to upstream.open. This was not problematic for
reading, because DataSourceInputStream.read would open the upstream if it's
not open already. It was however a problem for calling getUri() between
calling open and the first call to read, which would end up calling
upstream.getUri() on the not-yet-opened upstream.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195689472
Also only listen to requirements when actually necessary, else we can
put the service into the foreground when it needn't be there.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195597750
This type of flicker was visible (at least on my S8) whenever starting
the demo app process (from being properly killed) when other notifications
(e.g. completed download notification) was present.
This change passes whether the service was started as foreground through
the intent, and only applies the show-notification-on-stop hack if it
was. It's only necessary to start as foreground if your app is not already
in the foreground, so it's not necessary to do this from activity/ui
components.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195594930
If an app wants to reconcile its own state with that of a DownloadManager,
it's helpful to know when the DownloadManager has finished restoring any
previously persisted tasks.
Also suppress initial "state changed to paused" listener invocations for
tasks that are immediately started.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195594881
- Start before stop
- Release near bottom
- Private after public
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195570480
Also convert them to exposing periods and track groups, like
regular MediaSources do. This gets us much closer to being
able to use standard track selection components during offline
initialization. The helper is responsible for reverse mapping
selected tracks onto physical streams when generating the
download action. This is trivial except for the HLS case, which
is a TODO for now.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195500826
This may be preferable for using custom binary data,
and it's still easy to store Strings if needed.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195486817
The old event listener on AdsMediaSource is deprecated, in favor of
reporting in the normal way (via MediaSourceEventListener).
Add AdLoadException with information on what ad/ads failed to load.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195426144
- Support handling metadata queries (a.k.a get TrackGroupArray, which contains
Format and associated Metadata) from MetadataRetriever.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195401204
Upstream components may incorrectly clear the interrupted flag and not
propagate an exception when the caching thread is interrupted due to
cancellation. Pass a settable flag down to CacheUtil.cache and check it
frequently so it's not necessary to rely on the interrupted flag.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195371244
This avoids the interrupted flag being lost if the exception
is handled as an IOException.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195366244
- Made parts of DownloadActions public that were previously hidden.
This is necessary so that when an app is listening to the
DownloadManager, it can tell something about the tasks.
- Simplified DownloadActivity some more. The helpers may migrate
into their corresponding modules at some point, and also be
converted to return structured TrackGroupArrays rather than a
flat list of Formats.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195269824
Also add a build rule to simplify the test setup with a custom blacklist.
In addition, the test path pattern are made less specific to capture all the
static nullness tests in the /main/ directories.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195230334
This includes only the (hopefully) non-debatable changes for the DASH module
and all needed changes for call into the core library.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195097791
Currently it's possible to copy a master playlist with a URL
that was never present in the original. This change prevents
this, and also moves the key more in line with DASH/SS.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=195065286
A single master version prevents app developers from providing
custom download functionality (because they can't increment the
version). It's also error prone to expect someone modifying the
DASH action to remember to update the ActionFile master version.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194981886
Ad load errors will be forwarded as media source load errors in the future
and other ad events are not actually player related to warrant reporting
them as part of playback analytics.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194936656
This was adding a lot of code, and the multiple use cases
for Downloader was pretty confusing (in particular the
ordering of method calls was unclear). It's also not
performant (e.g. it requires loading/parsing manifest(s)
and initialization segments from disk).
In practice I think apps will need to keep a record of
what's offlined in their app's database (or equivalent),
which they can update by registering as a listener on
DownloadManager. This will be done for the demo app in
a subsequent change.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194932876
- It's much cleaner to split completed/error notification methods.
- Make error notification show the content title in the demo app.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194920507
It's no longer necessary to stash a reference to the
error yourself. This also correctly handles the case
where setPlayer is called with a player that's already
in an error state.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194828387
This change is intended to resolve overloading of "Download",
where a DownloadTask could be an actual download task, or a
remove task.
Also cleaned up some documentation.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194815058
- Redefine Scheduler interface to better describe what implementations
do. The previous version was too general, in that it allowed concrete
DownloadService implementations to pass different Requirements to
the base class and to the Scheduler. It's also difficult to see how
that version could ever support dynamic updates to Requirements, which
is probably a feature we'll need to add quite soon.
- Fix a (probably theoretical) problem where static fields in
DownloadService assumed only a single concrete implementation.
- Stop using PlatformScheduler pre-API-21 in demo app, because it will
fail.
- Define default Requirements that require network.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194785751
- It's wasted effort
- DataSpec reconstruction fails because creating a DataSpec with 0
length isn't allowed.
- Also better document DataSink open/close, to be like DataSource.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194778132
This replaces the existing listeners and provides some additional meta data
for each event.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194770421
- Add ACCESS_NETWORK_STATE to core library. It seems fairly fundamental. We should
also be using it elsewhere (e.g. to fail fast if there's no network).
- Add annotation to force apps using PlatformScheduler to declare RECEIVE_BOOT_PERMISSION
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194763051
Add a TestRunner for MetadataRetriever that roughly follow the test runner for
ExoPlayer. The TestRunner supports scheduling test steps in a sequence, compare
expected callbacks with actual callbacks, and block the test until it is done.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194518738
- When calculating the downloaded percentage in DASH, there was no
way to disambiguate between 0 of 0 segments being downloaded because
there are no cached indexes (i.e. 0% downloaded) and 0 of 0 segments
being downloaded because the index defines 0 segments (i.e. 100%
downloaded).
- Also replace use of NaN with a named constant.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194453202
Supports extracting data from AMR container format for both narrow and wide
band formats. Also added AmrExtractor as one of the default extractor to be
used in DefaultExtractorsFactory.
GitHub: #2527.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194407507
When we play downloaded content, we rely on the manifest filters
to produce a manifest that contains only the content that was
downloaded. It makes sense just to use the same filters during
download too, so we don't have to worry about any implementation
differences.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194380704
- clone() wasn't performing a deep enough copy
- Sort tracks in overrides to improve equals check
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194220596
ProgressiveDownloader never implemented this properly, and we
don't use it in DownloadManager/DownloadService, both of which
use a polling model. A polling model is also what's used elsewhere,
for example to query the current playback position.
This is effectively doing the TODO in ProgressiveDownloader.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194214579
This removes a fair chunk of code. The line delta would
be more negative if it not for adding all the /* x= */
comments in DashDownloadActionTest!
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194136689
Using addAnalyticsListener provides the same functionality with additional
information.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194071893
This removes the need for separate String/Parcelable filter paths in
the demo app. Hopefully this is a temporary measure as we work
toward using track groups + consistent keys for all media types.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194065499
Some of the events are emitted by the media periods itself and their index may
not be available in the publicly accessible timeline yet.
To prevent this, we currently check for timeline.isEmpty() only. But this may
also happen for dynamic changes, e.g. when new sources are added in fast
succession and a manifest for one of the new sources starts loading before the
updated timeline is reported.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=194057401
Playback will still fail if an input sample is larger
than 32K, but will now fail gracefully.
Issue: #4057
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193951955
Also move NotificationUtil from the UI module to the core module.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193941401
- This is needed to make DefaultTrackSelector properly thread
safe, and enable atomic changes to the selector that, for
example, disable a renderer and enable another one at the same
time.
- This change also saves/restores parameters and the start
position in PlayerActivity, resolving the ref'd issue.
Issue: #3915
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193913350
This may differ from the format MIME type for audio/eac3-joc.
Issue: #4165
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193906521
If the caller wants to pass an anonymous inner class for the media description
adapter, this results in slightly more readable code.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193666444
Also fix duplicate action strings when using a custom stop action, and do some
misc no-op cleanup.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193652377
This is to avoid callers needing to do an API check or suppress inlined constant
warnings.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193476188
This makes DownloadService easier to use in general and when only single
notification is used for all downloads.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193165982
*** Reason for rollback ***
Added the missing initialization to Timeline.EMPTY.
*** Original change description ***
Automated g4 rollback of changelist 192742299.
*** Reason for rollback ***
Culprit for b/78018932.
*** Original change description ***
Auto-register analytics collector in SimpleExoPlayer.
This automatically registers and deregisters an analytics collector in
SimpleExoPlayer. Doing this also allows to write integration tests checking
whether the reported window indices and media period ids are correct.
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=193006701
*** Reason for rollback ***
Culprit for b/78018932.
*** Original change description ***
Auto-register analytics collector in SimpleExoPlayer.
This automatically registers and deregisters an analytics collector in
SimpleExoPlayer. Doing this also allows to write integration tests checking
whether the reported window indices and media period ids are correct.
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192816182
*** Reason for rollback ***
Rolling back to re-disable the exception as the crash is still appearing on latest version
*** Original change description ***
Automated g4 rollback of changelist 191128111.
*** Reason for rollback ***
This was a temp fix to be cherrypicked into YouTube Andorid Main App 13.12 to resolve P0 b/77315136.
*** Original change description ***
Temp fix for b/77315136: Don't lock or check cache directories in SimpleCache
To be immediately rolled back after submission
Submitting on behalf of cblay.
***
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192789263
I was considering putting this directly in DefaultHttpDataSource, however:
- We'd need to modify at least OkHttpDataSource as well. I'm not sure whether
Cronet follows this type of redirect automatically or not.
- HttpDataSource instances don't know how they're going to be used, so it's
probably correct that they behave like the underlying network stack.
Issue: #4108
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192745408
This automatically registers and deregisters an analytics collector in
SimpleExoPlayer. Doing this also allows to write integration tests checking
whether the reported window indices and media period ids are correct.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192742299
Allow trimming an arbitrary small number of samples (needing to trim up to two
samples actually seems to be common). For larger numbers of samples we do coarse
trimming by applying the edit list in the normal path, and don't use gapless
playback.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192736956
Currently, pending stream offset changes are kept until an output buffer
timestamp surpasses the next pending stream offset. However, this is
problematic if the next stream offset overlaps with the current output
buffer sample times (e.g. because the next stream starts at a non-zero start
time).
To correctly time the switch to the next stream offset, this change keeps
the timestamp of the last queued input sample as switch point. And we only
switch to the new offset after an output sample timestamp reached this switch
point.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192736637
*** Reason for rollback ***
Rollback only needed to cherry-pick into Photos release.
*** Original change description ***
Automated g4 rollback of changelist 190906020.
*** Reason for rollback ***
Breaks looping.
*** Original change description ***
Automated g4 rollback of changelist 190628272.
*** Reason for rollback ***
b/76391022 was caused by a timestamp correction in StabilizableSimpleExoPlayer which will be fixed with this CL.
*** Original change description ***
Automated g4 rollback of changelist 189570277.
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
**...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192621719
*** Reason for rollback ***
Breaks looping.
*** Original change description ***
Automated g4 rollback of changelist 190628272.
*** Reason for rollback ***
b/76391022 was caused by a timestamp correction in StabilizableSimpleExoPlayer which will be fixed with this CL.
*** Original change description ***
Automated g4 rollback of changelist 189570277.
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
*** Original change description ***
Used fixed time frame in clipping media period.
Currently, whenever the clipping is updated, we...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192621199
This fixes gapless playback of streams with encoder padding on devices where the
decoder could set the end of stream flag on a non-empty final buffer.
Issue: #3449
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192407924
Support parsing ID3 tags at the beginning of FLAC files, even though FLAC spec
does not require this.
GitHub: #4055.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192127929
A renderer configuration being null is equivalent to the
renderer being disabled. Remove the redundant state.
Issue: #3915
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=192126015
Also added an assertion to the DRM event dispatcher to cause
immediate failure when this happens. This is consistent with
the assertion in the equivalent MediaSource class.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191892735
Also refactor the tests to make them behavioral (rather than testing the method)
and inline simple assertions.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191867614
These don't seem to be needed anymore. All tests run without them in gradle
and Blaze.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191867518
In MatroskaExtractor TrueHD audio samples are joined into larger chunks. For
some streams the resulting chunked samples seem never to start with a syncframe.
This could result in playback of TrueHD streams getting stuck after seeking
because we could never read a syncframe at the start of a sample to determine
the sample size.
Instead of expecting to find a syncframe at the start of a sample, search for it
within the sample, to fix this issue.
Note: this means that we may search a few thousand bytes to find the sample
size, but the cost is only incurred for the first audio sample read.
Issue: #3845
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191775779
This field (formerly "id") is almost impossible to use so far. Having setters
in the factories allows to specify custom tags for all media sources.
Also added a ExoPlayer.getCurrentTag() method to retrieve the tag of the
currently playing media source in a convenient way.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191738754
The data collector keeps track of active media periods to assign each event to
the correct media period and/or window. This information, together with other
information like playback position and buffered duration, is then forwarded
with the event to all registered listeners.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191726408
Previously the SonicAudioProcessor and SilenceSkippingAudioProcessor would track
their pending playback parameters and only apply them in flush(). Having the
values only take effect once flushed made the processors a bit more difficult to
use, especially because the value returned by isActive wouldn't update
immediately.
Make DefaultAudioSink only set the new speed/pitch/skip silence setting after
the audio processors have drained. This means it's no longer necessary to keep
track of pending parameter values and also fixes a bug where initial playback
parameters weren't applied because the audio processors weren't flushed while
uninitialized before DefaultAudioSink called isActive() on them.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191586727
The previous API allowed to pass in null to the constructors although variants
without listeners exist. That's why we need to handle these null values.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191577891
Partial rollback of [] which caused b/77294898 by deleting a public Exoplayer API.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191519591
Previously it was necessary to create a new Sonic instance every time the
processor was flushed. Add a flush() method to Sonic so that it can be reused
when seeking. It still needs to be recreated when parameters change.
SonicAudioProcessor and SilenceSkippingAudioProcessor have methods for setting
parameters that are documented as taking effect after a call to flush(), but
actually the value returned by isActive() was updated immediately. Track the
pending values and apply them in flush() to fix this.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191442336
We currently refresh repeatedly in this case. According to the
DASH spec omitting minUpdatePeriod indicates that the manifest
does not change, and therefore we should not refresh. I think
it might be valid to omit minUpdatePeriod in a dynamic manifest
if relying exclusively on EMSGs to trigger manifest refresh.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191420247
applyContentMetadataMutations and getContentMetadata methods suppossed to be synchronized and assert the instance isn't released.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191419637
This is in preparation for making it possible to flush a Sonic instance so that
it's not necessary to create new ones every time the processor is flushed.
There should be no behavior changes here.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191410326
To be immediately rolled back after submission
Submitting on behalf of cblay.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=191128111
Weirdly, the Android Javadoc indicates that it returns something
before the API level on which the same Javadoc states it was added.
In any case, we can simply not call the method to avoid the
warning, since we only use the value if the API level is at least
23 anyway.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190941776
Video renderers assume that the player position is advancing linearly while in
the started state. MediaCodecVideoRenderer schedules frames for rendering in the
future in the expectation that the player position is advancing.
This assumption is not currently true when using a position from the AudioTrack:
the player position can be fixed for (in the worst case) up to about 100 ms
before it starts increasing. This leads to an effect where the first frame is
rendered then a few other frames are rendered, then there's a pause before
frames start being rendered smoothly.
Work around this issue by checking whether the position has started advancing
before scheduling frames to be rendered in the future.
It might be preferable to make the audio renderer only become ready when its
timestamp can start advancing, but this is likely to be complicated.
Issue: #3841
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190937429
In audio processors an audio frame consists of a sample (which is 2 bytes for
16-bit PCM) for each channel. Sonic used "sample" to refer to this.
We've already diverged from the original source for Sonic quite a bit (deleting
code and making stylistic changes) and there haven't been upstream changes so
far, so it seems fine to start making more substantial changes here.
There should be no behavior changes here.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190916793
Use string concatenation for Metadata.Entry instances, and add
Util.formatInvariant for numerical formatting.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190915643
This adds two options to the ClippingMediaSource which allow proper clipping
of live streams:
1. The clipping stays fixed relative to already created media periods. That
means that playback actually progresses through the clipped media and
eventually reaches the end of the clipping. The window is also marked
as non-dynamic to let playback end in this case.
2. Allow to specify a clipping duration relative to the default position to
be able to specify the duration of live stream which is to be played.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190911049
*** Reason for rollback ***
b/76391022 was caused by a timestamp correction in StabilizableSimpleExoPlayer which will be fixed with this CL.
*** Original change description ***
Automated g4 rollback of changelist 189570277.
*** Reason for rollback ***
causes b/76391022, motion still playback in Photos is broken
*** Original change description ***
Used fixed time frame in clipping media period.
Currently, whenever the clipping is updated, we move the time frame of the
clipped period to start at 0. This causes problems when we are already playing
this period and the renderer position does no longer match the stream
positions.
This change keeps the time frame of the...
***
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190906020
- Ensure that no memory is used by audio processors that are always inactive, by
only allocating in flush() if active. If data was already allocated but a
processor becomes inactive we assume that the allocation may be needed in
future so do not remove it (e.g., in the case of ResamplingAudioProcessor).
- Make SilenceSkippingAudioProcessor set up its buffers in flush(), and clarify
that it is always necessary to call flush() if configure() returns true.
- Make reset() reset all state for all processors.
- Use @Nullable state or empty arrays for inactive audio processor buffers.
- Miscellaneous style/consistency cleanup.
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190895783
This uses a simple threshold-based algorithm for classifying audio frames as
silent, and removes silences from input audio that last longer than a given
duration.
The plan is to expose this functionality via PlaybackParameters in a later
change.
Issue: #2635
-------------
Created by MOE: https://github.com/google/moe
MOE_MIGRATED_REVID=190737027
